B01 Question and Answer Document 18AUG2026.pdf
PDF 85 KB Posted
- Attached to
- Steel Plates
- Solicitation number
- W912HZ26Q3807
About this file
This is a Questions and Answers document for a federal contract opportunity involving the procurement of steel plates with specific cutting requirements.
The solicitation addresses material sourcing and plate cutting specifications. Regarding material origin, the government confirms acceptance of both domestic material and qualifying country material, provided that offered steel plates meet the applicable requirements of DFARS 252.225-7001. On the plate cutting requirement, the government clarifies that the "fully cut out parts, NO RIPPING" specification does not mandate cut edges on all four sides of each plate. Rather, the requirement is designed to prevent cutting methods that introduce unnecessary warping to the material. This distinction indicates that contractors should focus on cutting techniques that maintain material integrity rather than on achieving specific edge configurations across all plate faces.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| A02.13-DOR_Doles_Steel Purchase.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
The following questions and answers are provided for informational purposes only:
Question #1: Please confirm that along with Domestic Material, you can accept Qualifying Country Material per 252.225-7002.
Answer #1: Yes. Qualifying-country material is acceptable, provided the offered steel plates meet the applicable requirements of DFARS 252.225-7001.
Question #2: Please refer to “DESCRIPTION OF REQUIREMENT” page. Under “FOR ALL PLATE CUTTING”, please clarify “fully cut out parts, NO RIPPING”. (Are you requesting a cut edge on all 4 sides of each plate)?
Answer #2: No, I am not requesting all 4 sides to be cut. The purpose of this requirement is to ensure that plates are not cut in a fashion that introduces unnecessary warping to the material.
File details come from the government source that posted it. Updated .