A02.13-DOR_Doles_Steel Purchase.pdf
PDF 148 KB Posted
- Attached to
- Steel Plates
- Solicitation number
- W912HZ26Q3807
About this file
This is a Description of Requirement document for steel plates issued by the Engineer Research and Development Center (ERDC), Geotechnical and Structures Laboratory (GSL), Impact and Explosion Effects Branch (IEEB). The requirement specifies the purchase of A36 steel plates with the following items: 5 rear panels measuring 144 x 96 inches at 1.0 inch thickness; 10 side panels measuring 144 x 48 inches at 1.0 inch thickness; and 10 end panels measuring 96 x 48 inches at 1.0 inch thickness. All plates must be fully cut out with no ripping, and must meet straightness, squareness, and flatness tolerances not to exceed ± 0.125 inches.
Delivery is required 30 days after contract award to the Engineer Research and Development Center, Geotechnical and Structures Laboratory, 3909 Halls Ferry Road, Vicksburg, MS 39180, Attention: Garrett Doles. Interested parties should contact Garrett Doles at (601) 634-2499 or Garrett.Doles@erdc.dren.mil for additional information. The document does not specify pricing terms, contract vehicle type, response deadlines, or award date information.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B01 Question and Answer Document 18AUG2026.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Description of Requirement Steel Plates
Scope: The Geotechnical and Structures Laboratory (GSL) of the Engineer Research and Development Center (ERDC), Impact and Explosion Effects Branch (IEEB) has a requirement to purchase multiple steel members with the following specifications. The vendor shall deliver the following:
Description:
Item # Material Quantity Description Plate Thickness,
in. Dimensions, in.
1 A36 Steel 5 Rear Panel 1.0 144 x 96 2 A36 Steel 10 Side Panels 1.0 144 x 48 3 A36 Steel 10 End Panels 1.0 96 x 48
For all plate cutting:
o fully cut out parts, NO RIPPING o straightness, squareness, and flatness tolerances not to exceed ± 0.125”
Delivery Date:
DELIVERY IS TO BE 30 DAYS AFTER CONTRACT AWARD.
Delivery Location: Engineer Research and Development Center
Geotechnical and Structures Laboratory ATTN: Garrett Doles 3909 Halls Ferry Rd.
Vicksburg, MS 39180 Phone: (601) 634-2499 Email: Garrett.Doles@erdc.dren.mil
File details come from the government source that posted it. Updated .