A02_19T0006_PSB_OIL_specifictions_Attachment_A.xls

XLS spreadsheet 33 KB Posted Mar 19, 2019

Attached to: Dredge Goetz Oil and Lubrication Products Delivery
Solicitation number: W912ES19T0006
Issued by: Department of the Army Corps of Engineers Engineering District St Paul

About this file

From the source

Attachment A - PSB Oil Specifications

View the file

Other files

File	Type	Posted
W912ES19T0006_Amendment_00003.pdf	PDF	Mar 27, 2019
W912ES19T0006_Amendment_2.pdf	PDF	Mar 26, 2019
W912ES-19-T-0006_Delivery_Locations_Attachement_B.pdf	PDF	Mar 26, 2019
W912ES19T0006_Amendment_00001.pdf	PDF	Mar 19, 2019
W912ES19T0006_Bulk_Oil_and_Lubricants.pdf	PDF	Mar 15, 2019

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Lubricants Specifications

Lubricants Specifications
Conditions: We do not want to mix different lubricants as it may lead to a degradation of the lubricants performance and ultimately causing premature failure and/or damage to our equipment. Therefore, we will only accept the entire lubricant purchase from one manufacture to eliminate the potential of mixed oils within our equipment.
Lubricants Specification / Type / Application
Type	Application	Specifications, Properties, Manufacture Requirements & Service Ratings
75w90 Synthetic Gear Oil	Cutter Head & Carriage Drive Planetary Gears	Synthetic extreme pressure gear lubricant. Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 103 Centistokes. The viscosity index per ASTM D-2270 shall not be less than 152. Full synthetic PAO lubricant
ISO 100 Machine Lube	Pump Radial / Thrust Bearing	100% pure paraffin base mineral oil extreme pressure lubricant with soluble moly. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 90 centistokes. The viscosity index per ASTM D-2270 shall not be less than 95. It shall meet and/or exceed Timken E.P test ASTM D-2782 "OK" load value of 65 lbs. Falex Continues Load Failure (ASTM D 3233) Lbs. 2500>
ISO 220 Gear Lube	Pump Reduction Gears W/Filter	PAO Synthetic/mineral oil Blend extreme pressure lubricant with soluble moly. It must not contain any tacifiers as the oil must pass through a filtration system. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 198 centistokes. The viscosity index per ASTM D-2270 shall not be less than 95. Falex Continues Load Failure (ASTM D 3233) Lbs. 2500>. - It shall meet and/or exceed Timken E.P test ASTM D-2782 "OK" load value of 70 lbs.
ISO 220 Gear Lube	Ladder & Spud Winches	Mineral oil extreme pressure gear lubricant with soluble moly with the addition of tacifiers as an additive package. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 198 centistokes. The viscosity index per ASTM D-2270 shall not be less than 95. Falex Continues Load Failure (ASTM D 3233) Lbs. 2500> It shall meet and/or exceed Timken E.P test ASTM D-2782 "OK" load value of 65 lbs.
ISO 320 Gear Lube	Swing Winches	Mineral oil extreme pressure gear lubricant with soluble moly with the addition of tacifiers as an additive package. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 288 centistokes. The viscosity index per ASTM D-2270 shall not be less than 95. Falex Continues Load Failure (ASTM D 3233) Lbs. 2500> It shall meet and/or exceed Timken E.P test ASTM D-2782 "OK" load value of 70 lbs.
50 Wt.	General Warren 2083 Falk Hydraulic Clutch Marine Gears	PAO Synthetic/mineral oil Blend extreme pressure lubricant with soluble moly. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 199 centistokes. The viscosity index per ASTM D-2270 shall not be less than 103. Timken EP Test (ASTM D-4172) must have a minimum "OK" Load of, 60bs.
15w-40 Synthetic / Blend	Caterpillar 3516 Diesel Engines	The PAO Synthetic / mineral oil Blend SAE 15W-40 engine oil must have soluble moly as a friction modifiers as an additive package. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 111 Centistokes. The viscosity index per ASTM D-2270 shall not be less than 147. Evaporation loss per ASTM-5800 shall not exceed 10%. The total base number (TBN) per ASTM D-2896 shall not be less than 10.
10 Wt. Hydraulic Oil	Equipment Hydraulics Excavator - Bulldozers & Vessel Steering	PAO Synthetic/mineral oil Blend extreme pressure lubricant with soluble moly. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 34 centistokes. The viscosity index per ASTM D-2270 shall not be less than 105. Timken EP Test (ASTM D-4172) must have a minimum "OK" Load of, 60bs.
30 Wt. TDTO	Transmissions (Caterpillar - ZF - Twin Disc)	PAO Synthetic/mineral oil Blend extreme pressure lubricant with soluble moly. The Viscosity @ 40 degrees C per ASTM D-445 shall not be less than 82 centistokes. The viscosity index per ASTM D-2270 shall not be less than 105. Timken EP Test (ASTM D-4172) must have a minimum "OK" Load of, 60bs.
Fuel Treatment	Fuel Barge Bunkers	Must be usable in treating ultra low sulfur diesel fuel. It must be registered and meets US EPA requirements for blending into low sulfur diesel fuels. The fuel additive must comply with federal low sulfur content requirements for use in diesel non-road engines.
		SPECIFICATION SHEETS FOR ALL PROPOSED PRODUCTS SHALL ACCOMPANY QUOTE!

File details come from the government source that posted it.