Solicitation_W912EF-17-R-0004.pdf

W68SBV62093454

CONSTRUCTIION PROJECT: MCNARY TURBINE REPLACEMENT, UNITS 1-14

PHYLLIS L BUERSTATTE 509-527-7211

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

14-Apr-2017

(RFP)

(IFB)

X

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

X

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________ calendar days after receiving aw ard, notice to proceed. This performance period is X mandatory, negotiable. (See _________________________Section 00700

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________17 copies to perform the w ork required are due at the place specified in Item 8 by ___________ local time ______________17 Jul 2017 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee is, X is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______180 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

USAED, WALLA WALLA - CONTRACTING DIV.

PHYLLIS L. BUERSTATTE

201 N. THIRD AVENUE

WALLA WALLA WA 99362-1876

W912EF

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

04:00 PM (hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

509-527-7802FAX:TEL: 509-527-7211 TEL: FAX:

W912EF-17-R-0004 195

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

W912EF-17-R-0004

Section 00010 - Solicitation Contract Form

ATTENTION TO OFFERORS

Offeror(s) may be asked to provide the following information for the Government’s use in the determination of offeror(s) responsibility, pursuant to FAR Part 9. Do not include it with your offer.

1. Current Balance Sheet and latest Profit and Loss Statement prepared from the most recent fiscal/calendar year and certified by an officer of the company.

2. The name of your banking institution, telephone number and the name of the individual to contact for a line-of-credit reference. (If you are the apparent low bidder, please contact your bank reference to let him/her know our office will be calling for financial information.)

Bank Institution ________________________________ Telephone Number ______________________________ Contact ________________________________________ Email Address __________________________________

3. Tax Identification Number ________________________

4. Tax Name (name under which the company pays its taxes) _____________________

5. List of present work to include agency or firm name, address, telephone number, and email address of primary point of contact responsible for inspection and acceptance of the work. (Attach list) Will performance of the present work inhibit your ability to perform this contract? ___________

6. Offeror’s email address: ____________________________________

Return completed form with all attachments to:

Email: Phyllis.L.Buerstatte@usace.army.mil

OR

Physical/Mailing Address: Walla Walla District Corps of Engineers, 201 North Third Avenue, Walla Walla, WA 99362-1876.

Table of Contents

Section 00010, Solicitation/Contract Form Section 00100, Bid Schedule/Instructions to Offerors Section 00600, Representations and Certifications Section 00700, Contract Clauses Section 00800, Special Contract Requirements Technical Specifications and Technical Attachments Drawings as listed in Technical Specification Section 00 01 15.00 28

Section 00100 - Bidding Schedule/Instructions to Bidders

Bid Schedule

Unrestricted Competition

The magnitude of the project is estimated between $250,000,000 and $500,000,000

1. The bid schedule is divided into twenty categories/tables for the following;

Hydraulic Design Base and Options (1000s and 1100s) Prototype Adjustable Blade Design Base and Options (2000s and 2100s) Prototype Adjustable Blade Supply Base and Options (2000s and 2100s) Prototype Adjustable Blade Install Base and Options (3000s and 3100s) Prototype Fixed Blade Design Base and Options (4000s and 4100s) Prototype Fixed Blade Supply Base and Options (4000s and 4100s) Prototype Fixed Blade Install Base and Options (5000s and 5100s) Generator Supply Base and Options (6000s and 6100s) Generator Install Base and Options (7000s and 7100s) Alternate Adjustable Blade Supply (8100s) - further explained in item #2 below Alternate Adjustable Blade Install (9100s) - further explained in item #2 below

2. The alternate bid tables provide a complete list of Adjustable Blade Supply and Install

CLINS to complete 8 additional adjustable blade turbines beyond the base 6 in the event that Government chooses to install fewer than 8 fixed blade turbines. Depending on the results of the design process and a determination by the design team in accordance with the option award clause, it is the government’s intention to have the flexibility to change the total number of adjustable blade turbines from 6 to “up to” 14. The 8 additional adjustable blade turbines would replace any number of the 8 fixed blade turbines. See Section – 01 11.00 00 26 General Requirement for further explanation. In the instance that additional adjustable blade turbines are added, optional bid items for the supply and installation of additional adjustable blade turbine components would be exercised, concurrent with a modification to deduct the same number of fixed blade turbine component bid items. To provide for the recovery of any one-time-costs (OTCs) that would be lost if fixed blade units are replaced by alternate adjustable blade units, any OTCs included in base and optional CLIN’s for fixed blade units should be included in CLIN’s for alternate adjustable blade units. Such cost include, but are not limited to, manufacturing engineering, tooling, fixturing, work planning and shop routing.

3. Where variations of an item are priced under one CLIN (Runners and Discharge Ring

Modifications), the first item (AA) will be awarded and subsequently modified based upon the outcome of the hydraulic and prototype design. These CLINs will be evaluated during the selection process based upon an average price of all the variations consistent with the evaluation factor instructions within this solicitation.

4. The twenty bid schedule categories provided, generally align with the phases of work as defined in Section 01 11.00 00 26 (with some overlapping exceptions) as well as delineate which CLINs are governed by supply clauses and those that are governed by construction clauses. The Supply clauses defined in this contract apply to the Design and Supply categories and CLINs (1000s, 2000s, 4000s, 6000s, and 8000s) while the Construction clauses apply to the Install categories and CLINs (3000s, 5000s, 7000s, and 9000s).

5. Prototype bid items, dependent on the outcome of the hydraulic design, include a defined basis for bid. The basis and specification technical requirements define the configuration of the item for bidding purposes. The basis for some bid items include blanks where the Offeror shall provide material designations, material quantities and/or labor percentages.

In some instances the basis provides clarification for some bid items that might differ in scope between units (5, 6, 13, and 14) and the other ten units which were recently rewound in 2011-2015.

6. Prototype bid item “Description” column verbs are defined as follows:

Design – Prototype design/engineering including analysis and the preparation of design documentation (reports, drawings, etc.).

Furnish – Design/engineering, manufacturing, procurement and delivery of components to McNary Powerhouse.

Supply – Manufacturing/procurement and delivery to McNary Powerhouse Provide – Furnish and installation.

Install (Installation) – Field work to incorporate new, modified and/or existing components into the finished generating unit.

Refurbish (Refurbishment) – Rehabilitation of existing components (including incorporation of replacement/modified components) for usage in the rebuilt generating unit.

Replace (Replacement) – Removal of existing component (if required for installation of replacement components) and installation of replacement component.

Hydraulic Design Base Bid Sub-Total $______________

Hydraulic Design Base Bid Items

ITEM DESCRIPTION Q U/M U/P AMOUNT Basis

Pre Iteration Coordination, Design, Analysis and Model Construction

1 JOB XXXX $________ None

Adjustable Blade Iteration 1 Coordination, Design, Analysis, Model Testing

1 JOB XXXX $________ None

Adjustable Blade Iteration 2 Coordination, Design, Analysis, Model Testing

1 JOB XXXX $________ None

Adjustable Blade Iteration 3 Coordination, Design, Analysis, Model Testing

1 JOB XXXX $_______ None

Adjustable Blade Iteration 4 Coordination, Design, Analysis, Model Testing

1 JOB XXXX $______ None

Adjustable Blade Final Performance Model Testing

1 JOB XXXX $_______ None.

Fixed Blade Iteration 1 Coordination, Design, Analysis, Model Testing

1 JOB XXXX $________ None

Fixed Blade Iteration 2 Coordination, Design, Analysis, Model Testing

1 JOB XXXX $________ None

Fixed Blade Iteration 3 Coordination, Design, Analysis, Model Testing

1 JOB XXXX $________ None

Fixed Blade Iteration 4 Coordination, Design, Analysis, Model Testing

1 JOB XXXX $________ None

Fixed Blade Final Performance Model Testing

Hydraulic Design Optional Bid Sub-Total $ _____________

Hydraulic Design Optional Bid Items

Adjustable Blade Iteration 5 Coordination, Design, Analysis, Model Testing (Optional)

1 JOB XXXX $________ None

Fixed Blade Iteration 5 Coordination, Design, Analysis, Model Testing (Optional)

Provide Additional Model Adjustable Blade Runner (Optional)

NTE

EA $_____ $________ None

Provide Additional Model Fixed Blade Runner (Optional)

NTE

EA $_____ $________ None

Provide Additional Model Discharge Ring for Performance Model Testing (Optional)

NTE

EA $_____ $________ None

Provide Additional Model Stay Vane Assembly for Performance Model Testing (Optional)

NTE

EA $_____ $_______ None

Provide Additional Set of Model Wicket Gates for Performance Model Testing (Optional)

NTE

SET $_____ $_______ None

Provide Additional Set of Model Wicket gates for Observational Model Testing (Optional)

NTE

SET $_____ $_______ None

Provide Modified Model Draft Tube for Performance Model Testing (Optional)

NTE

EA $_____ $________ None

Additional Performance Model Testing (Optional)

NTE

DAY $_____ $________ None

Prototype Adjustable Blade Design Base Bid Items

(6 of 14 Turbine Units)

Prototype Design

1 JOB XXXX $________ None

Adjustable Blade Discharge Ring and Draft Tube Liner Transition Prototype Design

Stay Vane Extensions Prototype Design

Wicket Gate Prototype Design

Prototype Adjustable Blade Design Base Bid Sub-Total $ _____________

Prototype Adjustable Blade Design Optional Bid Items

Thrust Bearing Structural Analysis (Optional)

NTE

JOB $_____ $________

None

Replacement Outer Headcover Prototype Design

Replacement Intermediate Headcover Prototype Design

Replacement Lower Headcover Prototype Design

Prototype Adjustable Blade Design Optional Bid Sub-Total $ _____________

Prototype Adjustable Blade Supply Base Bid Items

2005AA

Supply 280 Inch Adjustable 5-Blade Runner

6 EA $_____ $_______

Fully spherical hub and blades, 280 inch blade tip diameter with existing centerline. Runner details and gross dimensions as shown on proposal drawings.

____ tons/blade of martensitic stainless steel @ $_____/ton

____ tons/hub & deflector of carbon steel @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub self-lubricating bushings @ $_____/ton

______ tons/operating rod of forged steel @ $_____/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

2005AB

Supply 280 Inch Adjustable 6-Blade Runner

6 EA $_____ $________

Fully spherical hub and blades, 280 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade adjustable runner proposal drawings.

____ tons/blade of martensitic stainless steel @ $_____/ton

____ tons/hub & deflector of carbon steel @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub self-lubricating bushings @ $_____/ton

______ tons/operating rod of forged steel @ $_____/ton

Percent of total bid item price that is labor ______%

2005AC

Supply 292 Inch Adjustable 5-Blade Runner

6 EA $_____ $_______

Fully spherical hub and blades, 292 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade adjustable runner proposal drawings.

____ tons/blade of martensitic stainless steel @ $_____/ton

____ tons/hub & deflector of carbon steel @ $_____/ton ______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub self-lubricating bushings @ $_____/ton

______ tons/operating rod of forged steel @ $_____/ton

Percent of total bid item price that is labor ______%

2005AD

Adjustable 6-Blade Runner

6 EA $_____ $_______

Fully spherical hub and blades, 292 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade adjustable runner proposal drawings.

____ tons/blade of martensitic stainless steel @ $_____/ton

____ tons/hub & deflector of carbon steel @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub self-lubricating bushings @ $_____/ton ______ tons/operating rod of forged steel @ $_____/ton

Percent of total bid item price that is labor ______%

2006AA

Supply Discharge Ring Insert for 280 Inch Adjustable Blade Runner

6 EA $_____ $________

For 280 inch diameter runner having existing centerline.

Construction, materials and gross dimensions as shown on proposal drawings.

Includes a removable spherical section to facilitate spherical runner installation and removal. For insertion in existing discharge ring modified under bid item no.

3015.

Insert extends from the existing discharge ring welded connection with the bottom ring to the existing runner centerline elevation, forming the hydraulic wetted passage above the runner centerline.

____ tons austenitic stainless steel @ $_____/ton

____ tons of carbon steel @ $_____/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

2006AB

Supply Embedded Discharge Ring Section and Insert for 280 Inch Adjustable Blade Runner

6 SET $_____ $________

For 280 inch diameter runner having existing centerline.

Construction, materials and gross dimensions as shown on proposal drawings.

Embedded DR:

Component is carbon steel above centerline, and accepts the insert. Component below centerline forms the hydraulic passage and is stainless steel.

Length above centerline is

44.5 inch, connecting to the existing bottom ring. Length below centerline is 46.0 inch;

spherical for the length required by the replacement runner, with a 280 inch inner diameter at its lower end.

_______ tons austenitic stainless steel @ $________/ton

________ tons of carbon steel @ $________/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Insert:

Includes a removable spherical section, for insertion in embedded section, to facilitate spherical runner installation and removal.

Insert extends from the replacement discharge ring welded connection with the bottom ring to the existing runner centerline elevation, forming the hydraulic wetted passage above the runner centerline.

____ tons austenitic stainless steel @ $_____/ton

____ tons of carbon steel @ $_____/ton

Percent of total bid item price that is labor ______%

2006AC

Supply Embedded Discharge Ring Section and Insert for 292 Inch Adjustable Blade Runner

6 SET $_____ $________

For 292 inch diameter runner having existing centerline.

Construction and material designations identical to 280 inch design.

Embedded DR:

Component is carbon steel above centerline, and accepts the insert. Component below centerline forms the hydraulic passage and is stainless steel.

Length above centerline is

44.5 inch, connecting to the existing bottom ring. Length below centerline is 46.0 inch;

spherical for the length required by the replacement runner, with a 280 inch inner diameter at its lower end.

_______ tons austenitic stainless steel @ $________/ton

________ tons of carbon steel @ $________/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Insert:

Includes a removable spherical section, for insertion in embedded section, to facilitate spherical runner installation and removal.

Insert extends from the replacement discharge ring welded connection with the bottom ring to the existing runner centerline elevation, forming the hydraulic wetted passage above the runner centerline.

____ tons austenitic stainless steel @ $_____/ton

____ tons of carbon steel @ $_____/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Supply Set of Leading Edge Stay Vane Extensions

6 SET $_____ $________

One piece solid carbon steel 143 5/16 inch in length at connection to existing stay vanes. Cross sections shown in contract drawings.

Percent of total bid item price that is labor ______%

Supply Set of Trailing Edge Stay Vane Extensions

6 SET $_____ $________

One piece solid carbon steel 114 inch in length having cross sections shown in contract drawings.

Percent of total bid item price that is labor ______%

Supply Set of Wicket Gates

6 SET $_____ $_______

Cored martensitic stainless steel castings or weld fabrications having construction details and hydraulic shape equivalent to existing wicket gates.

Percent of total bid item price that is labor ______%

Supply Spare Wicket Gates

4 EA XXXX $________

Cored martensitic stainless steel castings or weld fabrications having construction details and hydraulic shape equivalent to existing wicket gate.

Percent of total bid item price that is labor ______%

Furnish Unit 13 – 14 Upper Bearing Bracket

2 EA $_____ $________ None

2012 Supply Turbine Shaft Seal 6 SET $_____ $________ None

Furnish Special Equipment, Tools, Scaffolding, and Runner Blade Maintenance Templates

1 SET XXXX $________ None

Furnish Gate Operating Mechanism Bushings and Bearing Plate

SET

Furnish Headcover and Bottom Ring Facing Plate

6 EA $_____ $________

Plate and fasteners for the existing outer headcover and bottom ring.

2016 Furnish Required Spares 1 SET XXXX $________ None

Furnish Turbine Maintenance Platform for Adjustable Blade Runner

1 EA XXXX $________

Platform sized for a five blade 280 inch runner as bid.

Percent of total bid item price that is labor ______%

Supply Spare Surface Air Coolers for Units 13 - 14 Generators

2 EA XXXX $________ None.

Prototype Adjustable Blade Supply Base Bid Sub-Total $_____________

Prototype Adjustable Blade Supply Optional Bid Items

Supply Draft Tube Liner Transition for 280 Inch Adjustable Blade Runner (Optional)

NTE

EA $_____ $________

Conical, 280 inch inner diameter at interface with bid item 2006AB embedded discharge ring, 308.8 inch inner diameter at connection to existing liner, 94.8 inch vertical length.

________ tons of carbon steel @ $________/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Supply Draft Tube Liner Transition for 292 Inch Adjustable Blade Runner (Optional)

NTE

EA $_____ $________

Conical, 292 inch inner diameter at interface with bid item 2006AC embedded discharge ring, 308.8 inch inner diameter at connection to existing liner, 94.8 inch vertical length.

________ tons of carbon steel @ $________/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Supply Outer Headcover (Optional)

NTE

EA $_____ $________

Identical to existing with the exception of a 12 inch larger inner diameter.

Percent of total bid item price that is labor ______%

Prototype Adjustable Blade Supply Optional Bid Sub-Total $ _____________

Supply Intermediate Headcover (Optional)

NTE

EA $_____ $________

Identical to existing with the exception of a 12 inch larger outer diameter.

Percent of total bid item price that is labor ______%

Supply Lower Headcover (Optional)

NTE

EA $_____ $________

Identical to existing.

Percent of total bid item price that is labor ______%

Furnish Blade Servomotor Shaft, Coupling Fasteners, Shaft Guard For Adjustable Blade Units (Optional)

NTE

SET $_____ $________

Shaft identical to existing with the exception of a 10 inch larger diameter cylinder bore and 10 inch larger diameter servo-to-immediate shaft coupling flange.

Percent of total bid item price that is labor ______%

Furnish Intermediate Shaft and Coupling Fasteners For Adjustable Blade Units (Optional)

NTE

SET $_____ $________

Shaft identical to existing with the exception of a 10 inch larger diameter servo-to-immediate shaft coupling flange.

Prototype Adjustable Blade Install Base Bid Items

Pre-Disassembly Watered Operational Testing

6 JOB $______ $________ None

Mobilization and Demobilization

1 JOB XXXX $________ None

Generating Unit Disassembly

6 JOB $______ $________ None

Furnish Machining Device

1 JOB XXXX $________

Remains property of contractor.

Provide Draft Tube and Scroll Case Drain Valves

6 JOB $______ $________ None

Provide Unit 13 and 14 Generator Surface Air Coolers

2 JOB $______ $________ None.

Provide Unit 13 and 14 High Pressure Lift System Components

2 JOB $______ $_______ None

Provide Static Hub Pressurization System and Refurbish/Modify Oil Head

6 JOB $______ $________ None

Provide Inner Oil Pipe and Refurbish/Modify or Replace Existing Oil Pipes

6 JOB $______ $________ None

Lead Based Paint Removal and Disposal

6 JOB $______ $________

Includes abatement required for modified existing embedded discharge ring with insert, reuse of existing headcovers w/o modification.

3011 Painting 6 JOB $______ $________

Includes painting for five blade adjustable blade runner, modified existing embedded discharge ring with insert, reuse of existing headcovers w/o modification.

Refurbish Outer Headcover

6 JOB $______ $________ None

Refurbish Lower Headcover

6 JOB $______ $________ None

Refurbish Intermediate Headcover

6 JOB $______ $________ None

Modify Discharge Ring Without Demolition for 280 Inch Adjustable Blade Runner

6 JOB $______ $________

For bid item 2005AA or 2005AB runner.

Machining of existing embedded discharge ring above runner blade centerline (elevation 230.92) to accept the adjustable blade bid item 2006AA insert. Installation of non-removable portion of insert.

Modification of existing discharge ring below blade centerline to elevation

227.083. Includes machining

(1/4 inch material thickness removal), installation of anchorage (60 total), stainless weld overlay, machining of overlay to contour required by replacement spherical runner.

Stay Vane/Ring Refurbishment Including Stay Vane Extension Installation

6 JOB $______ $________

Installation of extensions bid in items 2007 and 2008.

Bracing of leading edge extensions to scroll case not required.

3017 Refurbish Bottom Ring 6 JOB $______ $________ None

Refurbish Misc. Wicket Gate Operating Mechanism Components

6 JOB $______ $________ None

Line Boring and Installation of Wicket Gate Stem Bushings

6 JOB $______ $________ None

Refurbish/Replace Turbine Air Admission Valves

6 JOB $______ $________ None

Refurbish Gate Operating Ring

6 JOB $______ $________ None

Refurbish Intermediate and Generator Shafts

6 JOB $______ $________ None

Refurbish Servo Shaft for Adjustable Blade Operation

JOB

$______ $________ None

Refurbish Turbine Shafts For Adjustable Blade Operation

4 JOB $______ $________

Scope for units other than 5, 6, 13 and 14.

Refurbish Unit 13, 14 Turbine Shafts for Adjustable Blade Operation

Refurbish Wicket Gate Servomotors

4 JOB $______ $________

Scope for units other than 5, 6, 13 and 14.

Refurbish Units 13 and 14 Wicket Gate Servomotors

2 JOB $______ $________ None

Provide Water and Oil Piping Systems and Components

6 JOB $______ $________ None.

Provide Electrical Devices, Temperature Indicating Devices, Wiring/Cable Removal

Provide Generator Housing Lighting Wires for Units 13 and 14

2 JOB $______

Provide Unit 13 and 14 Generator Stator Heater Automatic Controls

2 JOB $______ $________ None.

Thrust Bearing Component Inspection

4 JOB $______ $________

Scope for units other than 5, 6, 13 and 14.

Thrust Bearing Component Inspection Units 13 and 14

2 JOB $______ $________ None

Guide Bearing Component Inspection

6 JOB $______ $________ None

Refurbish Units 13 and 14 Thrust Bearing Shoes

2 JOB $______ $_______ None

Refurbish Units 13 and 14 Thrust Bearing Runner and Collar

2 JOB $______ $________ None

Refurbish Units 13 and 14 Turbine Guide Bearings, Upper Guide Pads & Lower Guide Pads

2 JOB $______ $________ None

Reassembly of Adjustable Blade Units

6 JOB $______ $________

Includes installation of removable discharge ring insert as part of headcover, runner, and shaft assembly.

Prototype Adjustable Blade Install Base Bid Sub-Total $ ______________

Commissioning of Adjustable Blade Units

6 JOB $______ $________

Adjustable Blade Install Time and Materials

NTE XX XXXX $________

See Rate Schedule A at the end of this section for individual Time and Material items and summation

Prototype Adjustable Blade Install Optional Bid Items

Draft Tube Modification Upstream of Bulkhead Gate Slot (Optional)

NTE

JOB $______ $________

Upstream (of gate slot) modification shown in contract drawings.

Percent of total bid item price that is labor ______%

Draft Tube Modification Downstream of Bulkhead Gate Slot (Optional)

NTE

JOB $______ $________

Downstream (of gate slot) modification shown in contract drawings

Percent of total bid item price that is labor ______%

Hone Wicket Gate Servomotors (Optional)

NTE

JOB $______ $_______ None

Machine Stay Ring Flange (Optional)

NTE

Refurbish Thrust Bearing Shoes (Optional)

NTE

JOB $______ $_______

Scope for units other than 13 and 14.

Replace Discharge Ring For 280 Inch Adjustable Blade Runner (Optional)

NTE

JOB $______ $________

Demolition above elevation

225.50 feet, as shown on contract drawing S-001, to the maximum diameter shown on the drawing.

Installation of bid item no.

2006AB replacement discharge ring embedded section and non-removable portion of discharge ring insert.

Replace Discharge Ring and Draft Tube Liner Transition For 280 Inch Adjustable Blade Runner (Optional)

NTE

JOB $______ $________

Demolition above elevation

218.00 feet, as shown on contract drawing S-001, to the maximum diameter shown on the drawing.

Installation of bid item no.

2006AB replacement discharge ring embedded

Prototype Adjustable Blade Install Optional Bid Sub-Total $ ____________ section and non-removable portion of discharge ring insert.

Installation of bid item no.

2105 draft tube liner transition.

Replace Discharge Ring and Draft Tube Liner Transition For 292 Inch

NTE

Demolition above elevation

218.00 feet, as shown on contract drawing S-001, to the maximum diameter shown on the drawing.

Installation of bid item no.

2006AC replacement discharge ring embedded section and non-removable portion of discharge ring insert.

Installation of bid item no.

2106 draft tube liner transition.

Additional Painting to Improve Stay Vane/Ring Surface Roughness (Optional)

NTE

JOB $______ $_______ None

Refurbish Thrust Bearing Runner and Collar (Optional)

NTE

JOB $______ $________

Scope for units other than 13 and 14.

Refurbish Upper Guide Bearing Pads (Optional)

NTE

JOB $______ $________

Scope for units other than 13 and 14.

Refurbish Lower Guide Bearing Pads (Optional)

NTE

JOB $______ $________

Scope for units other than 13 and 14.

Refurbish Turbine Guide Bearings (Optional)

NTE

JOB $______ $________ None

Provide Thrust Bearing Oil Coolers (Optional)

NTE

JOB $______ $________

Scope for units other than 13 and 14.

Provide Unit 13 – 14 Thrust Bearing Oil Coolers (Optional)

NTE

JOB $______ $________ None

Prototype Fixed Blade Design Base Bid Sub-Total $ ____________

Prototype Fixed Blade Design Base Bid Items

(8 of 14 Turbine Units)

Fixed Blade Runner Prototype Design

1 JOB XXXX $________ None

Fixed Blade Discharge Ring and Draft Tube Liner Transition Prototype Design

1 JOB XXXX

For bid item 2006AC and 2106 components installed according to bid item 3108.

Prototype Fixed Blade Design Optional Bid Sub-Total $ ____________

Prototype Fixed Blade Design Optional Bid Items

Thrust Bearing Structural Analysis (Optional)

1 JOB

XXXX

X

Stay Vane Extensions Prototype Design (Optional)

1 JOB

XXXX

X

$________ None

Wicket Gate Prototype Design (Optional)

1 JOB

XXXX

X

$________ None

Replacement Outer Headcover Prototype Design (Optional)

1 JOB

XXXX

X

$_______ None

Replacement Lower Headcover Prototype Design (Optional)

1 JOB

XXXX

X

$________ None

Replacement Intermediate Headcover Prototype Design (Optional)

1 JOB

XXXX

X

$________ None

Prototype Fixed Blade Supply Base Bid Items

4003AA

Supply 280 Inch Fixed 5- Blade Runner

EA

Cylindrical blade tip periphery, 280 inch blade tip diameter with existing centerline. Runner construction and gross dimensions as shown on proposal drawings.

______ tons/blade of martensitic stainless steel @ $_____/ ton. Minimum for bidding purposes is 16.25 ton/blade.

_______ tons/hub of martensitic stainless steel @ $______/ton. Minimum for bidding purposes is 63.5 tons.

______ tons/deflector of carbon steel @$ _____ / ton.

Minimum for bidding purposes is 2.4 tons.

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

4003AB

Supply 280 Inch Fixed 6- Blade Runner

8 EA $______ $________

Cylindrical blade tip periphery, 280 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade fixed runner proposal drawings.

______ tons/blade of martensitic stainless steel @ $_____/ ton. Minimum for bidding purposes is 14.0 ton/blade.

_______ tons/hub of martensitic stainless steel @ $______/ton. Minimum for bidding purposes is 63.5 tons.

______ tons/deflector of carbon steel @ $_____ / ton.

Minimum for bidding purposes is 2.4 tons.

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

4003AC

Supply 292 Inch Fixed 5- Blade Runner

8 EA $______ $________

Cylindrical blade tip periphery, 292 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade fixed runner proposal drawings.

______ tons/blade of martensitic stainless steel @ $_____/ ton. Minimum for bidding purposes is 17.7 ton/blade.

_______ tons/hub of martensitic stainless steel @ $______/ton. Minimum for bidding purposes is 63.5 tons.

______ tons/deflector of carbon steel @ $_____ / ton.

Minimum for bidding purposes is 2.4 tons.

Percent of total bid item price that is labor ______%

4003AD

Supply 292 Inch Fixed 6- Blade Runner

8 EA $______ $________

Cylindrical blade tip periphery, 292 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade fixed runner proposal drawing.

______ tons/blade of martensitic stainless steel @ $_____/ ton. Minimum for bidding purposes is 15.2 ton/blade.

_______ tons/hub of martensitic stainless steel @ $______/ton. Minimum for bidding purposes is 63.5 tons.

______ tons/deflector of carbon steel @$ _____ / ton.

Minimum for bidding purposes is 2.4 tons.

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Supply Set of Leading Edge Stay Vane Extensions

8 SET $______ $________

One piece solid carbon steel 143 5/16 inch in length at connection to existing stay vanes. Cross sections shown in contract drawings.

Percent of total bid item price that is labor ______%

Supply Set of Trailing Edge Stay Vane Extensions

8 SET $______ $________

One piece solid carbon steel 114 inch in length having cross sections shown in contract drawings.

Prototype Fixed Blade Supply Base Bid Sub-Total $ ____________

Supply Set of Wicket Gates

SET

Cored martensitic stainless steel castings or weld fabrications having construction details and hydraulic shape equivalent to existing wicket gates.

4007 Supply Turbine Shaft Seal 8 SET

$________ None

Supply Gate Operating Mechanism Bushings and Bearing Plate

8 SET $______ $________ None

Supply Headcover and Bottom Ring Facing Plate

8 EA $______ $________

Plate and fasteners for the existing outer headcover and bottom ring.

Furnish Turbine Maintenance Platform for Fixed Blade Runner

1 EA XXXX $________

Platform sized for a five blade 280 inch runner as bid.

Percent of total bid item price that is labor ______%

Furnish Special Equipment, Tools, Scaffolding, and Runner Blade Maintenance Templates

1 SET

XXXX

$________ None.

Prototype Fixed Blade Supply Optional Bid Items

4107AA

Supply Embedded Discharge Ring Section For 280 Inch Fixed Blade Runner (Optional)

NTE

EA $______ $________

For 280 inch diameter runner having existing centerline.

Component is cylindrical and stainless steel. Length above centerline is 16.0 inch. Length below centerline is 46.0 inch.

____ tons austenitic stainless steel @ $_____/ton

________ tons of carbon steel @ $________/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

4107AB

Supply Embedded Discharge Ring Section For 292 Inch Fixed Blade Runner (Optional)

NTE

EA $______ $________

For 292 inch diameter runner having existing centerline.

Component is cylindrical and stainless steel. Length above centerline is 16.0 inch. Length below centerline is 46.0 inch.

____ tons austenitic stainless steel @ $_____/ton

________ tons of carbon steel @ $________/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Supply Draft Tube Liner Transition For 280 Inch Fixed Blade Runner (Optional)

NTE

EA

Conical, 280 inch inner diameter at interface with embedded discharge ring,

308.8 inch inner diameter at interface with existing liner,

94.8 inch vertical length.

Prototype Fixed Blade Supply Optional Bid Sub-Total $____________

________ tons of carbon steel @ $________/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Supply Draft Tube Liner Transition For 292 Inch Fixed Blade Runner (Optional)

NTE

EA

Conical, 292 inch inner diameter at interface with embedded discharge ring,

308.8 inch inner diameter at connection to existing liner,

94.8 inch vertical length.

________ tons of carbon steel @ $________/ton

Percent of total bid item price that is labor ______%

1 ton = 2,000 U.S. pounds finished material weight

Supply Outer Headcover (Optional)

NTE

EA $______ $________

Identical to existing outer headcover with the exception of a 12 inch larger inner diameter.

Percent of total bid item price that is labor ______%

Supply Intermediate Headcover (Optional)

NTE

EA $______ $________

Identical to existing with the exception of a 12 inch larger outer diameter.

Percent of total bid item price that is labor ______%

Supply Lower Headcover (Optional)

NTE

EA $______ $________

Identical to existing lower headcover.

Prototype Fixed Blade Install Base Bid Items

Pre-Disassembly Watered Operational Testing

8 JOB $______ $________ None

Generating Unit Disassembly

8 JOB $______ $________ None

Provide PMG Support and Drive Components For Fixed Blade Units

Provide Draft Tube and Scroll Case Drain Valves

8 JOB $______ $________ None

Lead Based Paint Removal and Disposal

8 JOB $______ $________

Includes abatement required for machining/overlay of existing embedded discharge ring, reuse of existing headcovers w/o modification.

5006 Painting 8 JOB $______ $________

Includes painting for five blade fixed blade runner, machining/overlay of existing embedded discharge ring, reuse of existing headcovers w/o modification.

Refurbish Outer Headcover

8 JOB $______ $________

Refurbish Lower Headcover

8 JOB $______ $________

Refurbish Intermediate Headcover

8 JOB $______ $________

Discharge Ring Modification Without Demolition For 280 Inch Fixed Blade Runner

8 JOB $______ $________

For bid item 4003AA or 4003AB runner.

Modification of existing embedded discharge ring from elevation 232.25 to elevation

227.083. Includes machining

(1/4 inch material thickness removal), installation of anchorage (80 total), stainless weld overlay, machining of overlay to 280.5 inch diameter cylindrical shape.

Stay Vane/Ring Refurbishment Including Stay Vane Extension Installation

8 JOB $______ $________

Installation of extensions bid in items 4004 and 4005.

Bracing of leading edge extensions to scroll case not required.

5012 Refurbish Bottom Ring 8 JOB $______ $________ None

Refurbish Misc. Wicket Gate Operating Mechanism Components

8 JOB $______ $________ None

Line Boring and Installation of Wicket Gate Stem Bushings

8 JOB $______ $________ None

Refurbish/Replace Turbine Air Admission Valves

8 JOB $______ $________ None

Refurbish Gate Operating Ring

8 JOB $______ $________ None

Refurbish Intermediate and Generator Shafts

8 JOB $______ $________ None

Refurbish Turbine Shafts for Fixed Blade Operation

6 JOB $______ $________

Scope for units other than 5, 6, 13 and 14.

Refurbish Unit 5, 6 Turbine Shafts for Fixed Blade Operation

2 JOB $______ $________ None

Refurbish Servo Shaft for Fixed Blade Operation

8 JOB $______ $________ None

Refurbish Wicket Gate Servomotors

6 JOB $______ $________

Scope for units other than 5, 6, 13 and 14.

Refurbish Units 5 and 6 Wicket Gate Servomotors

2 JOB $______ $________ None

Provide Water and Oil Piping Systems and Components

8 JOB $______ $________ None.

Provide Electrical Devices, Temperature Indicating Devices, Wiring/Cable Removal

Prototype Fixed Blade Install Base Bid Sub-Total $______________

Provide Generator Housing Lighting Wires for Units 5 and 6

2 JOB $______ $________ None

Provide Unit 5 and 6 Generator Stator Heater Automatic Controls

2 JOB $______ $________ None.

Install Government Furnished Generator Surface Air Coolers in Unit 6

1 JOB XXXX $________ None.

Thrust Bearing Component Inspection

6 JOB $______ $_______

Scope for units other than 5, 6, 13 and 14.

Thrust Bearing Component Inspection Units 5 & 6

2 JOB $______ $_______ None

Guide Bearing Component Inspection

8 JOB $______ $_______ None

Refurbish Unit 5 & 6 Thrust Bearing Shoes

2 JOB $______ $_______ None

Refurbish Unit 5 & 6 Thrust Bearing Runner and Collar

2 JOB $______ $________ None

Refurbish Unit 5 & 6 Turbine Guide Bearings, Upper Guide Pads & Lower Guide Pads

2 JOB $______ $________ None

Generating Unit Reassembly Fixed Blade Units

8 JOB $______ $________ None

Commissioning Fixed Blade Units

8 JOB $______

Fixed Blade Install Time and Materials

NTE XX XXXX $________

See Rate Schedule F at the end of this section for individual Time and Material items and summation

Prototype Fixed Blade Install Optional Bid Items

Discharge Ring Replacement For 280 Inch Fixed Blade Runner (Optional)

NTE

JOB

Demolition above elevation

225.50 feet, as shown on contract drawing S-001, to the maximum diameter shown on the drawing.

Installation of bid item no.

4107AA replacement discharge ring embedded section.

Discharge Ring and Draft Tube Liner Transition Replacement For 280 Inch Fixed Blade Runner (Optional)

NTE

218.00 feet, as shown on contract drawing S-001, to the maximum diameter shown on the drawing.

Installation of bid item no.

4107AA replacement discharge ring embedded section and bid item no. 4108 draft tube liner transition.

Discharge Ring and Draft Tube Liner Transition Replacement for 292 Inch Fixed Blade Runner (Optional)

NTE

218.00 feet, as shown on contract drawing S-001, to the maximum diameter shown on the drawing.

Installation of bid item no.4107AB replacement discharge ring embedded section and bid item no. 4109 draft tube liner transition.

Additional Painting to Improve Stay Vane/Ring Surface Roughness (Optional)

NTE

JOB $_____ $_______ None

Hone Wicket Gate Servomotors (Optional)

NTE

JOB $_____ $_______ None

Prototype Fixed Blade Install Optional Bid Sub-Total $______________

Draft Tube Modification Upstream of Bulkhead Gate Slot (Optional)

NTE

JOB $_____ $________

Upstream (of gate slot) modification shown in contract drawings.

Percent of total bid item price that is labor ______%

Draft Tube Modification Downstream of Bulkhead Gate Slot (Optional)

NTE

JOB $_____ $________

Downstream (of gate slot) modification shown in contract

Percent of total bid item price that is labor ______%drawings

Machine Stay Ring Flange (Optional)

NTE

Refurbish Thrust Bearing Shoes (Optional)

NTE

JOB $_____ $_______

Scope for units other than 13, Refurbish Thrust Bearing Runner and Collar (Optional)

NTE

JOB $_____ $________

Scope for units other than 13, Refurbish Upper Guide Bearing Pads (Optional)

NTE

JOB $_____ $________

Scope for units other than 13, Refurbish Lower Guide Bearing Pads (Optional)

NTE

JOB $_____ $________

Scope for units other than 13, Refurbish Turbine Guide Bearings (optional)

NTE

JOB $_____ $________ None

Provide Thrust Bearing Oil Coolers (Optional)

NTE

JOB $_____ $________

Scope for units other than 13, Generator Supply Base Bid Sub-Total $____________

Generator Supply Base Bid Items

Furnish Complete Set of Stator Bars, Supplies and Accessories for a New Winding - Including Factory Testing - for Unit

1 SET

XXXX

Furnish Complete Set of Stator Bars, Supplies and Accessories for a New Winding – including factor testing - for Unit 14

1 SET XXXX $________ None

Manufacture Prototype Stator Bars and Perform Voltage Endurance Test for Unit 13

1 JOB XXXX $________ None

Manufacture Prototype Stator Bars and Perform Voltage Endurance Test for Unit 14

1 JOB XXXX $________ None

Manufacture Prototype Stator Bars and Perform Thermal Cycling Test for Unit 13

1 JOB XXXX $________ None

Manufacture Prototype Stator Bars and Perform Thermal Cycling Test for Unit 14

1 JOB XXXX $________ None

Furnish Spare Parts for Unit 13

1 SET XXXX

Furnish Spare Parts for Unit 14

1 SET XXXX $________ None

Furnish Deteriorating Supplies For the Government Furnished Winding for Unit 5

1 SET XXXX $________ None

Generator Supply Optional Bid Items

Furnish Stator Core Materials And Accessories for Unit 13 Including Factory Tests (Optional)

1 SET $_____ $_______ None

Furnish Stator Core Materials And Accessories for Unit 14 Including Factory Tests

1 SET $_____ $________ None

Generator Supply Optional Bid Sub-Total $_____________

Generator Install Base Bid Sub-Total $_____________

Generator Install Base Bid Items

Remove Existing Stator Winding, Install and Test New Stator Winding for Unit 13

1 JOB

Remove Existing Stator Winding, Install and Test New Stator Winding for Unit 14

1 JOB XXXX $________ None

Remove Existing Stator Winding, Install and Test Government Furnished Winding for Unit 5

Inspect, Clean, and Test Stator Cores Units 5, 13 and 14

3 JOB

Clean, Inspect and Test Rotor Units 5, 13 and 14

Perform Special Field Test Units 5, 13 and 14

Clean, Inspect, and Test Stator and Rotor Units 1-4 and 6-12

11 JOB

Provide Surge Arrestors Units 5, 6, 13 and 14

4 JOB

$_______ None

Generator Install Optional Bid Items

Perform Additional Inter-laminar Insulation Test Units 5, 13 and 14 (Optional)

NTE

Remove Existing Stator Core, Install and Test New Stator Core for Unit 13 (Optional)

1 JOB

XXXX

X

$________ None

Remove Existing Stator Core, Install and Test New Stator Core for Unit 14 (Optional)

1 JOB

XXXX

X

$________ None

Remove Existing Stator Core, Install and Test Government- Furnished Stator Core Unit 5 (Optional)

$_______ None

Generator Install Optional Bid Sub-Total $_____________

Alternate Prototype Adjustable Blade Supply Optional Bid Items

8101AA

Supply 280 Inch Adjustable 5-Blade Runner (Optional)

NTE

EA $_____ $_______

Fully spherical hub and blades, 280 inch blade tip diameter with existing centerline. Runner details and gross dimensions as shown on proposal drawings.

____ tons/blade of martensitic stainless steel @ $_____/ton

____ tons/hub & deflector of carbon steel @ $_____/ton

______ tons/hub internal components of _______ material designation @ $_____/ton

______ tons/hub internal components of _______ material designation @ $_____/ton

______ tons/hub internal components of _______ material designation @ $_____/ton

______ tons/hub self-lubricating bushings @ $_____/ton

Percent of total bid item price that is labor ______%

______ tons/operating rod of forged steel @ $_____/ton

8101AB

Supply 280 Inch Adjustable 6-Blade Runner (Optional)

NTE

EA $_____ $________

Fully spherical hub and blades, 280 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade adjustable runner proposal drawings.

____ tons/blade of martensitic stainless steel @ $_____/ton

____ tons/hub & deflector of carbon steel @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub self-lubricating bushings @ $_____/ton

______ tons/operating rod of forged steel @ $_____/ton

Percent of total bid item price that is labor ______%

8101AC

Adjustable 5-Blade Runner (Optional)

NTE

EA $_____ $_______

Fully spherical hub and blades, 292 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade adjustable runner proposal drawing.

____ tons/blade of martensitic stainless steel @ $_____/ton

____ tons/hub & deflector of carbon steel @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub internal mechanism components of _______ material designation @ $_____/ton

______ tons/hub self-lubricating bushings @ $_____/ton

______ tons/operating rod of forged steel @ $_____/ton

Percent of total bid item price that is labor ______%

8101AD

Adjustable 6-Blade Runner (Optional)

NTE

EA $_____ $_______

Fully spherical hub and blades, 292 inch blade tip diameter with existing centerline. Runner construction and details similar to that shown on 280 inch five blade adjustable runner proposal drawing.

____ tons/blade of martensitic stainless steel @…