A.01.30Amend-0001_Summary.pdf

Summary of changes for Amend -0001 Ice Harbor/Little Goose Spare Set Draft Tube Stoplogs

W912EF-15-R-0046

1. Revised the following Specifications (see revised specifications for details):

a. SECTION 01 11 01.00 28 SUPPLEMENTARY REQUIREMENT

• Added Paragraph 1.4 ESTIMATED EXISTING STOPLOG WEIGHTS.

• Renumbered Paragraphs.

b. SECTION 05 59 13.00 28 FABRICATION OF HYDRAULIC STEEL STRUCTURES

• Revised Paragraph 1.3.1 Qualification of Structural Steel Fabricator.

• Revised Paragraph 3.8 WEIGHT OF STOPLOGS

2. Revised the following Drawings (See bracketed areas):

a. Volume 1 SHEET G-501.

b. Volume 1 SHEET S-302.

3. Revised the following Clause ( Yellow highlighted revision number and date on the index below are for this Amendment 0001):

252.236-7001 CONTRACT DRAWINGS, MAPS, AND SPECIFICATIONS (AUG 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall--

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

Drawing Number

Sheet

Title

Revision

Date

ICE HARBOR LOCK AND DAM

VOL. 1 - SPARE SET DRAFT TUBE STOPLOGS

GENERAL

IHG-1-0-1/494 G-001 COVER SHEET AND LOCATION MAPS

IHG-1-0-1/495 G-002 INDEX TO DRAWINGS

IHG-1-0-1/496 G-501 STOPLOG TOLERANCES - AND KEY

SECTION A 11/2/15

STRUCTURAL

IHP-1-5-1/19 S-301 TOP STOPLOG SECTION - PLAN AND

ELEVATION

IHP-1-5-1/20 S-302 SECOND STOPLOG SECTION - PLAN

AND ELEVATION A 10/29/15

IHP-1-5-1/21 S-303 THIRD STOPLOG SECTION - PLAN

AND ELEVATION

IHP-1-5-1/22 S-304 BOTTOM STOPLOG - PLAN AND

ELEVATION

IHP-1-5-1/23 S-401 TOP, 2ND & 3RD STOPLOG

SECTIONS - END ELEVATIONS

IHP-1-5-1/24 S-402 TOP, 2ND & 3RD STOPLOGS -

SECTION B

IHP-1-5-1/25 S-403 TOP, 2ND & 3RD STOPLOGS -

SECTION C

IHP-1-5-1/26 S-404 TOP, 2ND & 3RD STOPLOGS -

SECTION D

IHP-1-5-1/27 S-405 BOTTOM STOPLOG - END

ELEVATION - AND SECTION

IHP-1-5-1/28 S-406 BOTTOM STOPLOG - SECTIONS -

AND SECTIONS

IHP-1-5-1/29 S-501 STOPLOG DETAILS

IHP-1-5-1/30 S-502 SEAL DETAILS 1

IHP-1-5-1/31 S-503 SEAL DETAILS 2

FOR INFORMATION ONLY

IHP-1-4-2/31 FIO-001

POWERHOUSE CONCRETE OUTLINE

- GENERATOR BAYS - DRAFT TUBE

BULKHEAD BLOCKOUTS

IHP-1-5-1/4 FIO-002

POWERHOUSE STRUCTURAL -

DRAFT TUBE BULKHEAD GUIDES -

DRAFT TUBE BULKHEAD

BLOCKOUTS

IHP-1-4-2/25 FIO-003 POWERHOUSE CONCRETE OUTLINE

- GENERATOR BAYS - TAILRACE

DECK PLAN & DETAILS

IHP-1-4-0/1 FIO-004

POWERHOUSE CONCRETE -

GENERAL PLAN AND - SECTION OF

GENERATOR BAY

IHP-1-5-2/22 FIO-005

POWERHOUSE - NEW BOTTOM

DRAFT TUBE BULKHEAD -

MISCELLANEOUS DETAILS

IHP-1-5-2/20 FIO-006 POWERHOUSE - McNARY DRAFT

TUBE BULKHEADS - ALTERATIONS

IHP-1-5-2/14 FIO-007

POWERHOUSE - DRAFT TUBE

BULKHEADS - TOP SECTION -

McNARY DAM

IHP-1-5-2/15 FIO-008

POWERHOUSE - DRAFT TUBE

BULKHEADS - INTERMEDIATE

SECTION - McNARY

IHP-1-5-2/16 FIO-009

BULKHEADS - BOTTOM SECTION -

McNARY DAM

IHP-1-5-2/16 FIO-010

POWERHOUSE - MECHANICAL -

DRAFT TUBE - BULKHEAD LIFTING

BEAM

Drawing

Sheet

Title

Revision

Date

LITTLE GOOSE LOCK AND DAM

VOL. 2 - SPARE SET DRAFT TUBE STOPLOGS

GENERAL

LGG-1-0-

1/367 G-001 COVER SHEET AND LOCATION MAPS

LGG-1-0-

1/368 G-002 INDEX TO DRAWINGS

LGG-1-0-

1/369 G-501 STOPLOG TOLERANCES - AND KEY

PLAN - SHEET TITLE LINE 3

STRUCTURAL

LGP-1-5-1/14 S-301 TOP STOPLOG SECTION - PLAN AND

ELEVATION

LGP-1-5-1/15 S-302 MIDDLE STOPLOG SECTION - PLAN

AND ELEVATION

LGP-1-5-1/16 S-303 BOTTOM STOPLOG SECTION - PLAN

AND ELEVATION

LGP-1-5-1/17 S-304 STOPLOG SECTIONS - END

ELEVATIONS

LGP-1-5-1/18 S-501 DETAILS 1

LGP-1-5-1/19 S-502 DETAILS 2

LGP-1-5-1/20 S-503 DETAILS 3

FOR INFORMATION ONLY

LGP-1-4-2/9 FIO-001

GENERATOR BAY CONCRETE

OUTLINE - BLOCKOUTS - DRAFT

TUBE BULKHEAD GUIDES

LGP-1-4-2/5 FIO-002

OUTLINE - DRAFT TUBE PLAN - BAYS

1, 2 & 3

LGP-1-4-2/6 FIO-003

OUTLINE - DRAFT TUBE PLAN - BAYS

4, 5 & 6

LGP-6-0-0/2 FIO-004

POWERHOUSE ARRANGEMENT -

GENERATOR BAY - TRANSVERSE

SECTION

LGP-1-4-2/48 FIO-005

POWERHOUSE - GENERATOR BAY

CONCRETE OUTLINE - DRAFT TUBE

CONCRETE PLUG

LGP-1-5-2/12 FIO-006 POWERHOUSE - DRAFT TUBE

BULKHEAD - TOP SECTION

LGP-1-5-2/14 FIO-007 POWERHOUSE - DRAFT TUBE

BULKHEAD - BOTTOM SECTION

LGP-1-3-2/1 FIO-008 POWERHOUSE - DRAFT TUBE

BULKHEAD & STOPLOG - LIFTING

BEAMS

701A FIO-009

POWERHOUSE - DRAFT TUBE

BULKHEAD - LIFTING BEAM

ASSEMBLY

701B FIO-010 POWERHOUSE - DRAFT TUBE

BULKHEAD - LIFTING BEAM DETAILS

182D FIO-011 POWERHOUSE - DRAFT TUBE

BULKHEAD - DOGGING BEAM DETAIL

183A FIO-012

BULKHEAD - RETAINER BARS AND

DETAILS

183B FIO-013 POWERHOUSE - DRAFT TUBE

BULKHEAD - RUBBER SEAL DETAILS

(End of drawing list)