W912DW18Q0099_Amendment_0002.pdf

W68MD981705801

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

W912DW18Q0099 Amendment 0002 LD SCC Misc Materials

The purpose of this amendment is to revise the description for item #29 under Name Brand Components (Weschler). ACP4 w ithout MV-832 PST is acceptable. See revised scope for description.

Closing date and time is extended to Monday, 24 Sep 2018 by 10:00 AM Pacific Time.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 10

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Sep-2018

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912DW18Q0099

X 9B. DATED (SEE ITEM 11)

04-Sep-2018

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Sep-2018

CODE

USA ENGINEER DISTRICT, SEATTLE

ATTN: CENWS-CT

4735 EAST MARGINAL WAY SOUTH, BLDG. 1202

SEATTLE WA 98134-2388

W912DW 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912DW18Q0099

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 21-Sep-2018 10:00 AM to 24-Sep-2018 10:00 AM.

The following have been modified:

Instructions to Quoters

1. REPRESENTATIONS AND CERTIFICATIONS CONTAINED HEREIN MUST BE

COMPLETED BY QUOTERS AND RETURNED WITH QUOTES:

IF YOUR REPRESENTATIONS AND CERTIFICATIONS ARE REGISTERED IN THE

“SYSTEM FOR AWARD MANAGEMENT” (SAM) CHECK HERE . IF NOT,

YOU CAN REGISTER ONLINE AT www.sam.gov

2. Marking of Quote Envelopes:

Envelopes shall be plainly marked as follows:

Quote for: Supervisory Control Console (SCC)/Programmable Logic Controller (PLC) Annunciation/S-Board Materials for the Libby Dam Project in Libby, MT

Request for Quote No.: W912DW18Q0099

Closing Date and Time: 24 Sep 2018, 10:00 A.M. Pacific Time

AMENDMENTS NUMBERED________HAVE BEEN RECEIVED

3. Faxed quotes will NOT be accepted. Email quotes shall be accepted before closing at e-mail address monique.a.paano@usace.army.mil. For questions call 206-764-6084. Mailed quotes shall be accepted before closing at US Army Corps of Engineers, Seattle District, PO Box 3755 Seattle, WA. 98124-3755.

Please note commercial carriers will not deliver to PO Boxes. If using a commercial carrier, send proposals to: Monique Paano, Contract Specialist, U.S. Army Corps of Engineers, Seattle District, CENWS-CTC, 4735 East Marginal Way S., Bldg #1202, Seattle, WA 98134-2388.

4. The contractor receiving an award is required to be registered in the SAM (System for Awards

Management)

5. PROSPECTIVE CONTRACTORS: Contractors are required to be registered in the System for Awards

Management (SAM) for awards resulting from solicitations.

This rule more efficiently implements the Debt Collection Improvement Act of 1996, as it requires contractors to be registered in SAM for consideration of future solicitations, awards, and payment.

Registration is required prior to award of any contract, basic agreement, basic ordering agreement, or blanket purchase agreement from a solicitation.

LACK OF REGISTRATION IN THE SAM DATABASE WILL MAKE A QUOTE INELIGIBLE

FOR AWARD.

The web site may be accessed at www.sam.gov

6. Award shall be made to the responsive and responsible offer with the lowest priced quote.

7. Required Submittals:

a) Instruction Page (2 pages)

Paragraph 1 – Indicate if you are registered in SAM (System for Award Management) Paragraph 2 – Must acknowledge any/all amendments to the solicitation.

Paragraph 8 – Must fill in all company information requested

b) Fill in all pricing information.

c) FAR Provision 52.212-3 Alt I OFFEROR REPRESENTATIONS AND CERTIFICATIONS

(JUN 2008)

All of these must be filled in and returned in order to be eligible for evaluation.

DO NOT return the rest of the solicitation form.

8. The contractor is required to provide the following information with your quote:

Federal Taxpayer’s ID Number:

DUNS Number:

Cage Code Number This requires registration in SAM, web site for registration is www.sam.gov Remit to Address:

Company Name:

Address:

City/State/Zip:

Phone & Fax Numbers:

Point of Contact:

E-Mail Address:

9. All quoted items must meet the requirements of the Request for Quote (RFQ) including specifications stated in all attachments.

10. The contractor should list any special features or warranty information applicable to the quoted product(s) or service(s).

11. NOTE: Materials and equipment identified as being manufactured by Schweitzer Engineering Laboratories (SEL), Advantec, Cisco, and Weschler must be name brand. (See justification included with solicitation) All other materials and equipment described within the drawings shall be name brand or equivalent.

SCOPE OF WORK (SOW)

Libby Dam (LD) System Control Counsel (SCC)/Programmable

Logic Controller (PLC) Annunciation/S-Board Materials, Libby, MT

1. SCOPE:

1.1. The US Army Corps of Engineers (USACE) is upgrading plant-wide annunciation and sequential events recording (SER) system as well as the Supervisory Control Counsel at Libby Powerhouse and Dam. This procurement is to purchase miscellaneous materials to replace the SCC/PLC Annunciation/S-Boards.

Installation of the materials purchased in this scope of work will be completed by the Operating Project staff.

2. DESCRIPTION OF SUPPLIES:

2.1. Materials and equipment manufactured by Advantech, Schweitzer Engineering Laboratories (SEL), Cisco, and Weschler shall be name brand. All other materials and equipment described on other lines designate “Non-Name Brand Components” shall be name brand or equivalent.

The Contractor shall provide all of the following items:

2.2. NAME BRAND COMPONENTS:

Item Mfr. Part Number Description Unit QTY Cost/ Unit Total

1 Advantech FPM-7211W 21.5" Touchscreen - 16:9 Aspect Ratio - 1920 X 1080 Resolution Each 5

2 SEL 2242R1X0 Axion Back Plane, 10-Slot, 5U, Rack Mount Each 1 3 Cisco GLC-FE-100FX-RGD Multi - Mode Fiber SFP Module Each 8 4 Cisco PWR-RGD-AC-DC-H 150W 100-240VAC or 100-250VDC Power Supply Each 1 5 SEL 2242S2X0 Axion 4 Slot Back Plane, 5U, Horizontal Panel Mount Each 1 6 SEL 224312X0 Axion Power Coupler, 100BASE-FX Ports Each 2 7 SEL 22442424X0 AXION Digital Input Module, 24 Inputs, 125 VAC/VDC Each 7

8 SEL 22443132X0

AXION Digital Output Module, 8 Form A, 8 Form B Outputs Each 1

9 SEL 2812MRX0

EIA-232 MM Fiber-Optic Transceiver with IRIG-B - Receiver- DB9-MALE Each 8

10 SEL 2812MTX0

EIA-232 MM Fiber-Optic Transceiver with IRIG-B - Transmitter - DB9-MALE Each 22

11 SEL 2812MTX1

EIA-232 MM Fiber-Optic Transceiver with IRIG-B - Transmitter - DB9-MALE Each 4

12 SEL 3405RXXX High Accuracy IRIG-B Fiber-Optic Receiver - DB9 MALE Each 7

13 SEL 3405TXXX

High Accuracy IRIG-B Fiber-Optic Transmitter - DB9- MALE Each 7

14 SEL 9220XXX Fiber Optic Adapter For RS-485 port Each 20 15 SEL 932130X Low Voltage DC Power Supply Each 1 16 SEL C256-002 IRIG-B Coax Cable - BNC MALE - DB9 MALE, 2' Long Each 1 17 SEL C478A RJ45 Serial to DB9-MALE Cable w/ +5VDC, 1 ft Long Each 10

18 SEL C478A-1

RJ45 Serial to DB9-FEMALE Cable w/ +5VDC, w/ IRIG, 1' Long Each 17

19 SEL C654 J1 Mono Plug to BNC Connector, 6' Each 1 20 SEL C687 Cable for SEL-9220, Data and IRIG-B Each 10

21 SEL C942-02

IRIG-B Coax Cable - BNC MALE - 2 tinned wires for power, 2' Long Each 14

22 SEL C953-001 IRIG-B Coax Cable - BNC MALE - BNC MALE - 1' Long Each 1 23 SEL C972-002 IRIG-B Cable - RJ45 - BNC MALE - 2' Long Each 1

24 Weschler 4B4XXCBEUXXXXBB BG241 4-1/2 Digit, Line Volts, PTR:120, 0 - 18, "AC" "KILOVOLTS" Each 5

25 Weschler 4B4XXCBEUXXXXBB BG241 4-1/2 Digit, Generator Volts, PTR:120, 0 - 18, "AC" "KILOVOLTS" Each 5

26 Weschler 4B4XXDAVUXXXXBB BG241 4-1/2 Digit, Generator Amps, CTR:1200, 0-6000, "AC" "AMPS" Each 5

27 Weschler 4B4XXH33UXXXXBB BG241 4-1/2 Digit, MW AC, CTR:1200, PTR:120, WYE, 0

- 150, "AC" "MEGAWATTS" Each 5

28 Weschler 4H4XXFBBUXXXXBB BG241 4-1/2 Digit, Generator Frequency, PTR:120, 55 - 65, "HERTZ" Each 5

29 Weschler 4H4XXZ33UXXXXBB BG241 4-1/2 Digit, MVAR AC, CTR:1200, PTR:120, WYE, -150 - 0 - 150, "AC" "MEGAVARS" Each 5

30 Weschler 4S4XXBBUXXXXBB BG241 4-1/2 Digit, Line Frequency, PTR:120, 55 - 65, "HERTZ" Each 5

2.3. NON-NAME BRAND COMPONENTS:

Item Mfr. Part Number Description Unit QTY Cost/ Unit Total

1 ABB 1SNA 113 137 R0200

FEMT1 Snap-On End Section, For Term. Block Type M 6/8.STP Each 20

2 ABB 1SNA 115 118 R1100 M 6/8 Terminal Block, Screw Clamp, 8mm Each 100

3 ABB 1SNA 115 529 R1500

M 6/8.STP1 Heavy-Duty Switch Terminal Block, Screw Clamp, 8mm Each 300

4 ABB 1SNA 118 368 R1600

FEM6 Snap-On End Section, For Term. Block Type M 6/8 Each 20

5 ABB 1SNA 165 114 R1700

M 6/8 P Ground Terminal Block, Screw Clamp, Green/Yellow, 8mm Each 50

6 ABB 1SNA 165 830 R2100

M 6/8.P Ground Terminal Block, Screw Clamp, Green/Yellow, 8mm Each 10

7 ABB 1SNA 173 220 R0500 PR30 DIN Mounting Rail, 2 m, 7.5 mm, 35 mm, Steel Each 10 8 ABB 1SNA 173 627 R2100 EL6 Connector Plate for Jumper Bar Each 5 9 ABB 1SNA 176 673 R0200 BJMI8 10-Pole Jumper Bar FOR M 6/8 Terminals Each 20

10 ABB 1SNA 206 351 R1600 BAM2 End Stop, Gray, Steel Insert, 10mm Each 50

11 ABB C9689A33G01

FT-1 Flexi Test Switch, 6 currents(red handles), 4 potential(black handles) Each 5

12 Adder RMK10 Link XD150 Wall Mount Kit Each 12

13 Adder XD150FX-MMUS KVM DVI Video Extender with USB 2.0 Over Single Duplex Fiber Cable Each 5

14 cablestogo 28101 USB 2.0 A/B cable - 1m Each 1

15 cablestogo 28103 USB 2.0 A/B cable - 3m Each 5

16 cablestogo 28104 USB 2.0 A/B cable - 5m Each 5

17 cablestogo 00793 3 foot Snagless Shielded CAT6 cable Each 3

18 cablestogo 08538 ST-ST Fiber Optic Patch Cable, 62.5/125 Duplex MM TAA Compliant - 8m Each 10

19 cablestogo 11127 LC-ST Fiber Optic Patch Cable - 1m Each 50

20 cablestogo 11130 LC-ST Fiber Optic Patch Cable, 62.5/125 Duplex MM TAA Compliant - 4m Each 5

21 cablestogo 11163 ST-ST Fiber Optic Patch Cable - 1m Each 25

22 cablestogo 11166 ST-ST Fiber Optic Patch Cable, 62.5/125 Duplex MM TAA Compliant - 4m Each 5

23 cablestogo 26912 DVI-D Dual Link Digital Video Cable - 1m Each 2

24 cablestogo 26942 DVI-D Dual Link Digital Video Cable - 3m Each 5

25 cablestogo 29508 4-Port USB 2.0 Hub, Aluminum Case Each 1

26 cablestogo 29527 DVI-D Dual Link Digital Video Cable - 5m Each 5

27 cablestogo 38989 USB 2.0 A/B cable - 25' Each 1 28 cablestogo 40292 DVI-D to HDMI Digital Video Cable - 10m Each 1

29 cablestogo 42518 DVI-D to HDMI Digital Video Cable - 5m Each 1

30 Corning 95-000-51 Unicam High-Performance Connector, ST, OM1, Ceramic Ferrule, Beige Each 650

31 Corning 95-000-51-Z Unicam High Performance ST connector (OM1), Ceramic Ferrule, 25 Pack, Beige Housing, Beige Boot Each 1

32 Corning CCH-01U Closet Connector Housing, Holds Two CCH Connector Panels Each 1

33 Corning CCH-CP12-15T CCH Connector Panel, 12-Fibres, ST, 62.5µm multimode, OM1 Each 18

34 Corning ICH-02P-IND Industrial Connector Housing, holds 2 CCH connector panels Each 1

35 Corning SPH-01P-DIN Single-Panel Housing, Holds One CCH Connector Panel Each 6 36 Corning TKT-UNICAM-PFC UNICAM HIGH PERFORMACE TOOL KIT Each 2 37 Dell 20PY5 Laser Scroll USB Mouse Each 1

38 Dell C7016H 70" Conference Room Monitor, 1920 X 1080, 16:9 Aspect Ratio Each 1

39 Dell KB216 USB Keyboard Each 1 40 Dell P2417H 24" Desktop Monitor, 1920 X 1080, 16:9 Aspect Ratio Each 1

41 Eaton FAZ-C1/2-NA Miniature Circuit Breaker 2-pole, 277V AC / 48V DC, DIN mount - 1A Each 1

42 Eaton FAZ-C2/2-DC Miniature Circuit Breaker 2-pole, 250V DC, DIN mount

- 2A Each 5

43 Eaton FAZ-C3/2-NA Miniature Circuit Breaker 2-pole, 277V AC / 48V DC, DIN mount - 3A Each 2

44 Eaton FAZ-C5/2-DC Miniature Circuit Breaker 2-pole, 250V DC, DIN mount

- 5A Each 1

45 Electroswitch 010B-2E21DH 5 - Emergency Stop Switch Engraving, TITLE "EMERGENCY STOP", "STOP" @1:30 AND @10:30 Each 5

46 Electroswitch 010B-2S21AN 1SA - Speed Adjust Switch Engraving, TITLE "SPEED ADJUST", "RAISE" @1:30, "LOWER" @10:30 Each 5

47 Electroswitch 010B-2U23AC 1GS - Generator Start-Stop Switch Engraving, TITLE "UNIT START STOP", "START" @1:30, "STOP" @10:30 Each 5

48 Electroswitch 010B-2V21AF 1VA - Volts Adjust Switch Engraving, TITLE "VOLTS ADJUST", "RAISE" @1:30, "LOWER" @10:30 Each 5

49 Electroswitch 010C-1A15A 25CS1 - Auto Synch Enable Engraving, TITLE "AUTO- SYNCH", "START" @10:30 Each 5

50 Electroswitch 010C-2C25CU

43RV - Control Transfer Switch (A/M) Engraving, TITLE

"EXCITER CONTROL TRANSFER", "MANUAL" @ 10:30,

"AUTO" @12:00 Each 5

51 Electroswitch 010D-2C29X CLC - Clearance Switch Engraving, TITLE "CLEARANCE", "STANDBY/RUN" @12:00, "CLEARANCE" @10:30 Each 5

52 Electroswitch 010D-2E19N 1E - Exciter Control Switch Engraving, TITLE "EXCITER CONTROL", "OFF" @12:00, "ON" @10:30 Each 5

53 Electroswitch 010C-4A13D Ammeter Transfer Switch Engraving Each 5

54 Electroswitch 011D-2G13AG SS - Generator Synch Switch Engraving, TITLE "GEN SYNCH", "OFF" @12:00, "ON" @10:30 Each 5

55 Electroswitch 10 Disconnect Engraving, Title "MOD 1", "OPEN" @ 10:30, "CLOSE" @ 1:30 Each 1

56 Electroswitch 10 Disconnect Engraving, Title "MOD 2", "OPEN" @ 10:30, "CLOSE" @ 1:30 Each 1

57 Electroswitch 10 Disconnect Engraving, Title "MOD 3", "OPEN" @ 10:30, "CLOSE" @ 1:30 Each 1

58 Electroswitch 2404MA 1VS - Voltmeter Transfer Switch, includes engraving NP 10C-4V21 Each 5

59 Electroswitch 24202D 1E - Exciter Control Switch Each 5

60 Electroswitch 24202D 43RV - Exciter Control Transfer Switch (A/M) Each 5

61 Electroswitch 24203E SS - Generator Synch Switch Each 5

62 Electroswitch 24204B CLC - Clearance Switch Each 5

63 Electroswitch 24208UD 43LC - Control Transfer Switch (L/C), includes engraving Each 5

64 Electroswitch 24905QN 1AS- Ammeter Transfer Switch Each 5

65 Electroswitch 74201D 25CS1 - Auto Synch Enable Each 5

66 Electroswitch 74202AHP 52CS - Breaker Control Switch, includes engraving Each 5

67 Electroswitch 74202D MOD - Disconnect Open/Close Each 3

68 Electroswitch 74202D 1VA - Volts Adjust Switch Each 5

69 Electroswitch 74202D 1GS - Generator Start-Stop Switch Each 5

70 Electroswitch 74202D 1SA - Speed Adjust Switch Each 5

71 Electroswitch 802A257G01 5 - Emergency Stop Switch (PULL TO TURN) with red pistol grip Each 5

72 Hoffman A16H16ALP3PT NEMA 12 Enclosure 16" X 16" X 6", 3 Point Latch Each 1 73 Hoffman A16P16 Full Subpanel, Painted Steel, 22.2" X 40.20" Each 1 74 Hoffman A-36P24 Full Subpanel, Painted Steel, 33" X 27" Each 1 75 Hoffman ASM6 M6 X 16 Combo-Head Screws - Qty 20 Each 7 76 Hoffman ATEMNO Normally Open Thermostat Each 1 77 Hoffman EB-12 12 Position Earthing and Neutral Busbar Each 34 78 Hoffman LEDA1S35 LED Light, 90-260VAC Each 32 79 Hoffman P19RP5UP Rack Panel, 5U, Painted Steel Each 1 80 Hoffman P2AFMK PROLINE G2 Frame Floor Mounting Bracket Each 15 81 Hoffman P2AH180 PROLINE G2 180 Degree Hinge Kit Each 10 82 Hoffman P2C228 PROLINE G2 Solid Cover, Front or Rear Each 6 83 Hoffman P2CS228 PROLINE G2 Side Cover 2200X800 Each 3 84 Hoffman P2D228 PROLINE G2 Solid Door 2200X800 Each 10 85 Hoffman P2F2288 PROLINE G2 Frame 2200X800X800 Each 8 86 Hoffman P2PP118 Proline G2 Partial Subpanel, 1100X800 Each 16 87 Hoffman P2T88 PROLINE G2 Solid Top 800X800 Each 8

88 Hoffman PGFM6 PROLINE Fastener Package M6 cage nuts and bolts - Qty 20 Each 30

89 Hoffman PGK PROLINE Grounding Kit Each 18 90 Hoffman PLFSWD Remote Door Switch Each 10 91 Hoffman PM6CN M6 Cage Nuts - Qty 20 Each 18 92 Hoffman PRA1922TP PROLINE G2 Rack Angle Tapped, 2200, Pair Each 1 93 Hoffman XPV32 VENT KIT, 300X200, Gray Each 10 94 LEDTRONICS RPLH22-02-01-02 Red LED Each 35 95 LEDTRONICS RPLH22-02-02-02 Amber LED Each 7 96 LEDTRONICS RPLH22-02-04-02 Green LED Each 30 97 LEDTRONICS RPLH22-02-06-02 WHITE LED Each 17

98 LEDTRONICS SLF467-0CW-130B 130VDC S-6 Candelabra Screw LED Lamp Each 10 99 Leviton 16252-DIN 15A Duplex Receptacle, DIN Mount Each 5

100 MEANWELL DR-75-24 24VDC / 75W POWER SUPPLY Each 5

101 Moxa MGATE5105-MB-EIP EtherNet/IP to Modbus Industrial Ethernet Gateway Each 7 102 Panduit C2LG6 Duct cover, 2" W x 6' length, PVC, light gray. Each 10

103 Panduit F2X3LG6 Panduct type F narrow slot wiring duct, 2.25" W x 3.12" H, 6' length, PVC, light gray. Each 10

104 Panduit F2X5LG6 Panduct type F narrow slot wiring duct, 2.25" W x 5.12" H, 6' length, PVC, light gray. Each 2

105 RED LION PAXH0000 1/8 DIN AC CURRENT/VOLTAGE METER Each 2

106 States M-25006 Type NT Terminal Block, 6 Poles, Sliding Link, White Marker Each 10

107 States M-25012 Type NT Terminal Block, 12 Poles, Sliding Link, White Marker Each 190

108 States M-25012-G Type NT Terminal Block, 12 Poles, Shorting Block, White Marker Each 25

109 States TBT 168 Type NT Terminal Block Jumper Bar, 36" Each 5

110 YOKOGAWA 120 452 ADAA Synchroscope, Slow-Fast Each 5

Allied Wire and Cable EPR/CPE 12-5C 5c 12awg Feet 6000

Allied Wire and Cable EPR/CPE 12-9C 9c 12awg Feet 1500

Allied Wire and Cable EPR/CPE 14-5C 5c 14awg Feet 5000

Allied Wire and Cable EPR/CPE 14-19C 19c 14 awg Feet 500

Allied Wire and Cable EPR/CPE 16-4C 4c 16awg Feet 4500

Allied Wire and Cable EPR/CPE 16-7C 7c 16awg Feet 7000

Allied Wire and Cable EPR/CPE 16-12C 12c 16awg Feet 3000

Allied Wire and Cable 168815-18 2 shielded twisted pair 18awg Feet 2000

Allied Wire and Cable SIS-16-7T SIS Wire Feet 3000

120 Berk-Tek PDR006-CB3510/25 6f Feet 1500 121 Berk-Tek PDR012-CB3510/25 12f Feet 3000 122 Berk-Tek PDR024-CB3510/25 24f Feet 500

3. ACCEPTANCE OF MATERIALS:

3.1. Materials will be inspected at Libby Dam prior to final acceptance. Contractor shall be responsible for providing a single shipment with all materials purchased with this scope of work. Vendors shall supply items in the sizes and quantities specified to satisfy the requirements of this contract directly to the successful quoter who will then package and ship to the Government.

3.2. New equipment only; No remanufactured or “gray market” items. All items must be covered by manufacturer’s warranty.

4. SHIPPMENT & DELIVERY:

4.1. The Contractor shall deliver all parts FOB no later than 90 days after award. All deliveries must take place during Libby Dams working hours, 7:00am – 4:00pm Monday - Thursday except Federal holidays. There is no one on site to accept Friday deliveries. Contractor’s schedule for delivery should allow enough time to:

4.2. Address:

Attn: Robert Reeves – Technical Section

USACE – Libby Dam Project Office 17877 Highway #37 Libby, MT 59923-7828

(End of Summary of Changes)