Amendment_0002.pdf

Amendment 0002

Questions:

1. Sheet 6 of 36 Drawing for Miter Gate Cylinders or the Culvert valve cylinder?

2. Sheet 7 of 36 Drawing Miter Gate Cylinders or the Culvert valve cylinder?

3. There is also one detail drawing missing for one the rod, it may be on sheet 8 of 36, so may it be possible to post this sheet?

Answer to questions above:

Prospective bidders are encouraged to visit the Troy Lock and Dam site, located at 1 Bond Street, Troy, NY 12180 to inspect the existing hydraulic cylinders and record any measurements needed, as the drawings provided are for reference only and the hydraulic cylinders to be provided are similar to those in operation at the lock. The successful bidder is required upon award to conduct a site visit and verify the conditions and hydraulic cylinder dimensions and materials as currently constructed.

Important note:

The project specification calls for delivery in 90 days. This was an error. The actual delivery dates are as follows: Two (2) of the new hydraulic cylinders, the valve cylinder and one of the gate cylinders, must be completed and delivered to the Albany Field Office (AFO) no later than 120 calendar days following contract award. The remaining three (3) new hydraulic cylinders must be completed and delivered to the AFO no later than 180 calendar days following contract award.