B.08.03_W912DR19B0018-0003_(002).pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Combat Capabilities Development Command (CCDC), Building 3072 Renovation, Aberdeen Proving Ground (APG), Aberdeen, Maryland

Please See Attached

1. CONTRACT ID CODE PAGE OF PAGES

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 03-Sep-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912DR19B0018

X 9B. DATED (SEE ITEM 11)

12-Aug-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

03-Sep-2019

CODE

U.S. ARMY CORPS OF ENGINEERS, BALTIMORE

2 HOPKINS PLAZA

BALTIMORE MD 21201

W912DR 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

X

AMENDMENT NO. 0003 TO IFB W912DR-19-B-0018

EFFECTIVE SEP 03, 2019

SPECIFICATIONS:

1. Section 31 23 00.00 20, EXCAVATION AND FILL, Paragraph 3.9: Add, “Disposal area is M-Field in Edgewood located at the intersection of “Maxwell Point Road and Ricketts Point road.”

DRAWINGS:

2. Sheet C-103: Delete Sheet C-103 in its entirety as originally issued and substitute the attached like-number sheet, dated 8/30/19.

3. Sheet C-104: Delete Sheet C-103 in its entirety as originally issued and substitute the attached like-number sheet, dated 8/30/19.

4. Sheet C-511: Add new attached sheet, dated 8/30/19.

GENERAL:

5. Offerors’ Request for Information and Government Responses: Offerors’ Request for Information and Government Responses are attached for information only.

6. The following forms were omitted from the solicitation. Please return them with your bid.

STANDARD FORM LLL (SECTION 00 73 00 – SUPPLEMENTARY CONDITIONS)

EFT FORM (SECTION 00 73 00 – SUPPLEMENTARYCONDITIONS)

CERTIFICATE OF CORPORATE AUTHORITY (SECTION 00 73 00 – SUPPLEMENTARY

CONDITIONS)

AMENDMENTS:

7. Delete the header from pages 2 thru 4 in amendment 0001 as originally issued as “AMENDMENT NO. 0001 TO RFP W912DR-16-D-0005 EFFECTIVE AUG 21, 2019” and replace with

“AMENDMENT NO. 0001 TO IFB W912DR-19-B-0018 EFFECTIVE AUG 21, 2019”.

8. Delete the header from page 2 in amendment 0002 as originally issued as “AMENDMENT NO.

0002 TO RFP W912DR-16-D-0005 EFFECTIVE AUG 22, 2019” and replace with “AMENDMENT

NO. 0002 TO IFB W912DR-19-B-0018 EFFECTIVE AUG 22, 2019”.

WAGE DETERMINATION:

9. Delete Wage Determination dated JUL 29, 2019as originally issued and replace with the attached Wage Determination dated AUG 8, 2019.

ATTACHMENTS:

1. Revise Sheet C-103, dated 8/30/19

2. Revise Sheet C-104, dated 8/30/19

3. New Sheet C-511, dated 8/30/19

4. Offerors’ Request for Information and Government Responses

5. Form LLL, EFT Form and Certificate of Corporate Authority

6. Wage Determination, dated 8/9/19

32.37

33.17

36.77

38.04

32.98

34.49

GRASS

33.49

37.08

33.77

32.87

33.00

33.53

32.75

33.22

DOORWAY

F.F=44.36

GRASS

34.49

32.86

32.95

43.84

35.20

31.78

33.52

32.19

33.01

32.30

MAC

32.87

32.27

33.16

3"

PINE

GRASS

37.02

32.56

32.02

32.82

33.31

35.05

33.25

37.11

DOORWAY

F.F=33.93

32.56

33.19

DOORWAY

F.F=33.56

DOORWAY

F.F=44.38

35.65

37.32

33.95

34.33

32.56

33.03

32.55

32.78

32.39

MAC

33.46

4"

PINE

32.97

33.49

32.52

33.14

35.38

32.72

DOORWAY

F.F=34.00

C O

N C

32.13

DOORWAY

F.F=33.86

DOORWAY

F.F=44.33

33.65

DOORWAY

F.F=33.91

32.49

32.41

33.35

33.97

33.61

32.71

32.60

33.64

32.51

32.72

33.33

3"

PINE

32.47

32.12

32.78

34.61

34.41

32.83

42" SYCAMORE

33.84

31.92

DOORWAY

F.F=33.91

32.32

33.68

33.55

CONC

DOORWAY

F.F=44.38

32.92

32.29

32.39

33.20

32.98

31.83

32.75

33.46

33.99

32.65

32.42

32.66

MAC

33.05

GRASS

33.99

32.89

31.97

32.78

35.99

GRASS

32.27

GRASS

31.87

GRASS

DOORWAY

F.F=44.40

33.85

33.32

MAC

36.49

37.29

C O

N C

33.26

32.88

33.51

33.06

33.67

32.62

GRASS

32.15

32.17

32.56

32.96

33.37

33.74

DOORWAY

F.F=33.93

32.66

33.16

MAC

24"

MAPLE

33.68

32.01

32.07

33.23

32.75

43.95

33.61

33.40

36.50

M

A

C

32.71

32.90

G R

A S

S

33.95

32.16

32.27

32.98

33.41

32.89

32.16

33.42

33.67

33.16

32.06

31.77

MAC

33.45

33.84

33.49

31.77

33.20

33.24

37.62

DOORWAY

F.F=33.95

32.87

GRASS

32.85

37.79

33.60

CONC

36.89

33.94

32.48

32.45

33.16

32.25

33.11

33.39

32.48

32.66

33.66

31.73

GRASS

36.68

G

R

A

S

S

33.45

32.15

31.96

32.74

33.21

44.04

33.38

37.72

36.09

32.26

33.21

DOORWAY

F.F=44.46

32.73

32.37

32.65

33.50

32.31

MAC

32.66

33.89

32.39

DOORWAY

F.F=33.99

32.87

31.81

32.81

G

R

A

S

S

37.84

33.01

32.49

37.93

32.45

31.99

44.06

C O

N C

35.76

32.20

32.90

32.45

32.59

32.66

C O

N C

33.64

33.57

32.43

32.53

33.58

3 S

TO

R Y

B

LD

G G

R A

N

IT

E

32.09

33.08

31.58

33.17

32.78

GRASS

36.27

32.56

GRASS

MAC

34.76

31.98

GRASS

32.21

32.98

33.04

32.68

32.73

33.31

32.87

33.41

32.50

G

R

A

S

S

B

R

I

C

K

W

A

L

L

C

O

N

C

PLASTIC

ADA MAT

34.05

G R

A N

I T

E

W A

L L

CONSTRUCTION

MATERIALS

HANDICAP

ELEVATOR

C O

N C

G R

A N

I T

E

W

A L L

G R

A N

I T

E

W

A L L

33.51

33.17

36"

SYCAMORE

38.08

37.42

37.52

GRASS

33.08

33.37

GRASS

33.29

37.23

33.26

37.47

28"

MAPLE

37.59

37.62

GRASS

33.10

34.59

33.10

MAC

33.05

33.58

37.31

37.22

37.07

33.33

37.36

48"

OAK

37.53

MAC

34.31

36.84

37.34

32.84

33.19

34.10

32.97

33.13

33.44

37.23

37.18

22"

HOLLY

37.02

33.33

37.46

GRASS

37.33

36.98

36.72

33.99

32.83

33.44

37.44

37.41

33.33

37.59

36.70

37.26

33.37

GRASS

33.49

32.69

MAC

33.52

37.30

DOORWAY

F.F=33.93

38.07

36.95

GRASS

37.24

36.53

33.21

GRASS

37.13

37.08

37.38

33.63

37.68

37.18

32.97

GRASS

37.06

37.42

37.29

34.39

37.32

37.40

33.04

37.67

33.34

37.38

38.33

GRASS

37.34

38.37

37.16

GRASS

33.34

33.38

33.29

32.87

36.81

36.59

33.18

36.76

38.31

35.91

34.49

38.31

36.98

37.28

37.64

33.10

10"

HOLLY

36.90

33.05

33.30

36.85

33.41

G R

A S

S

36.69

35.95

33.18

37.40

37.67

GRASS

33.31

37.25

33.23

33.37

37.78

37.28

C O

N C

G R

A N

I T

E

W

A L L

PLASTIC

ADA MAT

B

LD

G

F.F

44.3

C

O

N

C

C O

N

S

I D

E W

A L K

C O

N C

S

ID

E W

A

LK

C O

D

E W

A L K

RARITAN AVE

S

C

H

O

O

L

T

R

E

E

T

E

N 660800

E

N 660800

E

N 661100

S

I D

E

W

A

L

K

33.59

TOP EL: 33.71

UMH(1667)

H

P

S

HPS H

P

S

H

P

S

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

HPS

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

D

I P

6" P

VC @

7.05%

SM1

P

V C

36.15

32.95

32.21

33.12

25.10

25.00

R

P

24.80

22.86

D

D1

I1

33.90

34.01

35.20

34.01

33.90

35.20

34.35

34.18

33.85

33.96

34.87

33.95

33.99

33.86

33.83

32.5

30.5

S O

L I C

I T

A T

I O

N

N

O

D E

S I G

N E

D

B

Y

D E

S C

R I P

T I O

N

M A

R K

S I Z

E

S U

B M

I T

T E

D

B

Y

D A

T E

C O

N T

R A

C H

E C

K E

D

B

Y

D R

A W

N

B

Y

I S

S U

E

D

A T

E

SHEET ID

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

W H

I T

M A

N

R

E Q

U A

R D

S

O C

I A

T E

S

L L P

S

O U

H

R

O L I N

E

S

T R

E E

T

B A

L T

I M

O R

E

M

A R

Y L A

D

B A

L T

I M

O R

E

D

I S

T R

I C

T

H

O P

K I N

S

P

L A

Z A

G

W D

R D

A U

G U

R E

A L

P

R O

P

C

D

E

A N

S I

D

W D

R B

A B

E R

D E

E

P

O

V I N

G

G

R O

U N

D

M

D

T H

E

R

E N

O V

A T

I O

N

O

F

B

U I L D

I N

G

ORIGINAL DOCUMENTS

%PRODUCTION DATA 1%

%PRODUCTION DATA 2% %PRODUCTION DATA 3% %PRODUCTION DATA 4%

F

B W

J

J M

H

J M

H

G R

A D

I N

G

A

A

I N

A G

E

P

L A

N

C-103

US Army Corps of Engineers

U S

A

R M

Y

C

O R

F

E

N G

I N

E E

R S

N

MARYLAND STATE COORDINATE SYSTEM

NAD '83 NAVD '88

GRADING AND DRAINAGE PLAN

SCALE: 1" = 20'

SHEET LEGEND

8" DIP

P L

T

E

P

M

P

A G

E

S

E T

U P

P

L O

T

S

T Y

L E

A

E C

B

W

S

B

P

Z

E A

N S

I

F

U L

L

B

L E

I N

C H

E S

F I L

E N

A M

E

N

C

A D

D

C

D

W G

SCALE: 1" = 20'

E5

C-401

A4

C-401

C7

C-401

A1

C-401

1' MAJOR CONTOUR

0.1' MINOR CONTOUR

WATER

POST INDICATOR OR GATE VALVE

UNDERGROUND ELECTRIC DUCTBANK

AREA OF EXCAVATION FOR FOUNDATION WATERPROOFING

AND DRAIN TILE INSTALLATION

6" PVC

8" PVC

STORM DRAIN

SANITARY SEWER

F7

C-505

D4

C-505

20' 40'0

MDE No. 20-SF-0016

INLET. SEE DETAIL A1/C-511

SHEET KEYNOTES

MICRO-BIO FACILITY. SEE DETAIL E1/C-511

MANHOLE. SEE DETAIL A4/C-511

OBSERVATION WELL. SEE DETAIL D5/C-511

R

E V

I S

Y

A

M E

N D

M E

N T

CLEANOUT. SEE DETAIL D5/C-511

33.90

34.01

35.20

34.01

33.90

35.20

34.35

34.18

33.85

33.96

34.87

33.95

33.99

33.86

33.83

32.5

30.5

S T

O C

K P

IL

E

A R

E A

M A

X H

E

IG

H T

M A

X S

ID

E

S L O

P E

:1

STAG

IN

G A

ND

STO

RAG

E A

REA

65'

CIP

S C

E

R o A

U r

R o A

U r

GRASS

DOORWAY

F.F=44.36

GRASS

MAC

3"

PINE

GRASS

DOORWAY

F.F=33.93

DOORWAY

F.F=33.56

DOORWAY

F.F=44.38

MAC

4"

PINE

DOORWAY

F.F=34.00

C O

N C

DOORWAY

F.F=33.86

DOORWAY

F.F=44.33

DOORWAY

F.F=33.91

3"

PINE

42" SYCAMORE

DOORWAY

F.F=33.91

CONC

DOORWAY

F.F=44.38

MAC

GRASS

GRASS

GRASS

GRASS

DOORWAY

F.F=44.40

MAC

C O

N C

GRASS

DOORWAY

F.F=33.93

MAC

24"

MAPLE

M

A

C

G R

A S

S

MAC

DOORWAY

F.F=33.95

GRASS

CONC

GRASS

G

R

A

S

S

DOORWAY

F.F=44.46

MAC

DOORWAY

F.F=33.99

G

R

A

S

S

C O

N C

C O

N C

3 S

TO

R Y

B

LD

G G

R A

N

IT

E

GRASS

GRASS

MAC

GRASS

G

R

A

S

S

B

R

I

K

L

L

C

O

N

C

PLASTIC

ADA MAT

G R

A N

I T

E

W A

L L

CONSTRUCTION

MATERIALS

HANDICAP

ELEVATOR

C O

N C

G R

A N

I T

E

W

A L L

G R

A N

I T

E

W

A L L

36"

SYCAMORE

GRASS

GRASS

28"

MAPLE

GRASS

MAC

48"

OAK

MAC

22"

HOLLY

GRASS

GRASS

MAC

DOORWAY

F.F=33.93

GRASS

GRASS

GRASS

GRASS

GRASS

10"

HOLLY

G R

A S

S

GRASS

C O

N C

G R

A N

I T

E

W

A L L

PLASTIC

ADA MAT

B

LD

G

F.F

44.3

C

O

N

C

C O

D

E W

A L K

C O

N C

S

ID

E W

A

LK

C O

D

E W

A L K

RARITAN AVE

S

C

H

O

R

E

E

T

E

N 660800

E

N 660800

E

N 661100

S

I D

E

W

A

L

K

H

P

S

HPS H

P

S

H

P

S

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

HPS

H P

S

H P

S

H P

S

H P

S

H P

S

H P

S

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

W

W

D

I P

6" P

VC @

7.05%

36.15

32.95

32.21

33.12

P

24.80

22.86

D

D1

I1

SB-3

SB-4

SB-2

SB-1

S O

L I C

I T

A T

I O

N

N

O

D E

S I G

N E

D

B

Y

D E

S C

R I P

T I O

N

M A

R K

S I Z

E

S U

B M

I T

T E

D

B

Y

D A

T E

C O

N T

R A

C H

E C

K E

D

B

Y

D R

A W

N

B

Y

I S

S U

E

D

A T

E

SHEET ID

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

W H

I T

M A

N

R

E Q

U A

R D

S

O C

I A

T E

S

L L P

S

O U

R

O L I N

E

S

T R

E E

T

B A

L T

I M

O R

E

M

A R

Y L A

B A

L T

I M

O R

E

D

I S

T R

I C

T

H

O P

K I N

S

P

L A

Z A

G

W D

R D

A U

G U

R E

A L

P

R O

P

C

D

E

A N

S I

D

W D

R B

A B

E R

D E

O

V I N

G

G

R O

U N

D

M

D

T H

E

R

E N

O V

A T

I O

N

O

F

B

U I L D

I N

G

ORIGINAL DOCUMENTS

%PRODUCTION DATA 1%

%PRODUCTION DATA 2% %PRODUCTION DATA 3% %PRODUCTION DATA 4%

F

B W

J

J M

H

J M

H

E R

O S

I O

N

A

D

I M

E N

T

C

O N

T R

A

N

C-104

US Army Corps of Engineers

U S

A

R M

Y

C

O R

E

N G

I N

E E

R S

N

MARYLAND STATE COORDINATE SYSTEM

NAD '83 NAVD '88

SHEET KEYNOTES

20' 40'0

EROSION AND SEDIMENT CONTROL PLAN

SCALE: 1" = 20'

CURB INLET PROTECTION. SEE DETAIL E-9-3/C-506.

WATER AND SEWER LINE INSTALLED AS UTILITY CONSTRUCTION OUTSIDE OF

SEDIMENT CONTROLS.

SHEET LEGEND

SILT FENCE OFFSET FROM SIDEWALK FOR CLARITY. INSTALL SILT FENCE

IMMEDIATELY ADJACENT TO SIDEWALK. WHERE SILT FENCE CROSSES SIDEWALK,

USE SILT FENCE ON PAVEMENT. SEE DETAILS E-1/C-506 AND E-2/C-506.

P L

T

E

P

M

P

A G

E

S

E T

U P

P

L O

T

S

T Y

L E

A

E C

B

W

S

P

Z

E A

N S

I

F

U L

L

B

L E

I N

C H

E S

F I L

E N

A M

E

N

C

A D

D

C

D

W G

SCALE: 1" = 20'

1' MAJOR CONTOUR

0.1' MINOR CONTOUR

8" DIP

6" PVC

8" PVC

STORM DRAIN

WATER

SANITARY SEWER

POST INDICATOR OR GATE VALVE

UNDERGROUND ELECTRIC DUCTBANK

LIMIT OF DISTURBANCE

SILT FENCE

TREE PROTECTION FENCE

CURB INLET PROTECTION

TREE PROTECTION FENCE. SEE DETAIL 31/C-506.

SB-1

SOIL BORING AND IDENTIFIER

BORING LOCATION (TYP. OF 4). SEE SHEET C-510 FOR BORING LOGS AND LAB RESULTS.

CIP

SCE

STABILIZED CONSTRUCTION ENTRANCE

AREAS NOT REQUIRING STORMWATER MANAGEMENT

AREAS OF SAME DAY STABILIZATION

SAME DAY STABILIZATION

THE WORK SHOWN IN THIS AREA SHALL BE DONE USING THE METHOD OF 'SAME DAY

STABILIZATION'. NO MORE LAND AREA [OR LENGTH OF TRENCH, SWALE, CHANNEL, ETC.]

SHALL BE DISTURBED THAN CAN BE STABILIZED BY THE END OF THE SAME WORKDAY. ALL

DISTURBED AREAS THAT DO NOT DRAIN TO A SEDIMENT CONTROL DEVICE SHALL BE

STABILIZED BY THE END OF THE SAME WORKDAY. NO DISTURBED AREA SHALL BE LEFT

UNSTABILIZED UNLESS THE RUNOFF IS DIRECTED TO AN MDE APPROVED SEDIMENT

CONTROL DEVICE. FOR WORK ACTIVITIES IN PAVED AREAS, THE STONE BASE COURSE

LAYER MUST BE PLACED BY THE END OF THE SAME DAY TO QUALIFY AS SAME DAY.

MDE No. 20-SF-0016

TOTAL AREA NOT REQUIRING STORMWATER MANAGEMENT: 5,788.84 SF (0.13 AC)

TOTAL AREA TOWARDS STORMWATER MANAGEMENT: 4,733.39 SF (0.11 AC)

TOTAL LIMIT OF DISTURBANCE: 10,522.23 SF (0.24 AC)

EROSION AND SEDIMENT CONTROLS ARE REQUIRED AND PROVIDED FOR THIS PROJECT

SINCE THE TOTAL LIMIT OF DISTURBANCE FOR THE PROJECT EXCEEDS 5,000 SF. STORM

WATER MANAGEMENT IS NOT REQUIRED SINCE THE LIMIT OF DISTURBANCE THAT WOULD

REQUIRE STORM WATER MANAGEMENT 5,000 SF (4,733.39 SF).

R

E V

I S

A

M E

N D

M E

N T

L I C

I T

A T

I O

N

N

O

D E

S I G

N E

D

B

Y

D E

S C

R I P

T I O

N

M A

R K

S I Z

E

S U

B M

I T

T E

D

B

Y

D A

T E

C O

N T

R A

C H

E C

K E

D

B

Y

D R

A W

N

B

Y

I S

S U

E

D

A T

E

SHEET ID

G

2 3 4 5 6 7 8 9 10

F

E

D

C

B

A

W H

I T

M A

N

R

E Q

U A

R D

S

O C

I A

T E

S

L L P

S

O U

R

O L I N

E

S

T R

E E

T

B A

L T

I M

O R

E

M

A R

Y L A

B A

L T

I M

O R

E

D

I S

T R

I C

T

H

O P

K I N

S

P

L A

Z A

G

W D

R D

A U

G U

R E

A L

P

R O

P

C

D

E

A N

S I

D

W D

R B

A B

E R

D E

O

V I N

G

G

R O

U N

D

M

D

T H

E

R

E N

O V

A T

I O

N

O

F

B

U I L D

I N

G

ORIGINAL DOCUMENTS

%PRODUCTION DATA 1%

%PRODUCTION DATA 2% %PRODUCTION DATA 3% %PRODUCTION DATA 4%

F

B W

J

J M

H

J M

H

S T

O R

M W

A T

M

N

A G

E M

E N

T

D

E T

A I L S

C-511

US Army Corps of Engineers

U S

A

R M

Y

C

O R

E

N G

I N

E E

R S

P L

T

E

P

M

P

A G

E

S

E T

U P

P

L O

T

S

T Y

L E

A

E C

B

W

S

P

Z

E A

N S

I

F

U L

L

B

L E

I N

C H

E S

F I L

E N

A M

E

N

C

A D

D

C

D

W G

MDE No. 20-SF-0016

INLET

N.T.S.

A1

MANHOLE

N.T.S.

A4

MICRO-BIO SECTION

N.T.S.

E1

CLEANOUT AND OBSERVATION WELL DETAILS

N.T.S.

D5

OBSERVATION WELL DETAIL

CLEANOUT DETAIL

DETAIL A - CLEANOUT/OBSERVATION WELL CAP

R

E V

I S

A

M E

N D

M E

N T

CERTIFICATE OF CORPORATE AUTHORITY

(This Certificate shall be submitted as part of the bid/proposal or signed contract if the bidder/offeror is a corporation.)

CERTIFICATE

I, _______________________________, certify that I am the ______________________________ of the corporation named as bidder/offeror therein, that _________________________________, who signed this bid/proposal on behalf of the bidder/offeror, was then _______________________ of said corporation; that said bid/proposal was duly signed for and in behalf of said corporation by authority of its governing body, and is within the scope of its corporate powers.

By: ___________________________________(Corporate Seal) (Signature)

(Typed Name of Corporation)

NOTE: A CORPORATE OFFICER OTHER THAN THE OFFICER SIGNING THE BID/PROPOSAL MUST

FILL OUT AND SIGN THIS FORM.

End of Text

US ARMY CORPS OF ENGINEERS

ELECTRONIC PAYMENTS/DIRECT DEPOSIT

1. The Debt Collection Improvement Act of 1996 provided that Federal payments shall be made by electronic funds transfer (EFT). The Corps issues electronic corporate payments though the Automated Clearing House (ACH) network using the Cash Concentration or Disbursement Plus Addendum (CCD+) payment format. Instead of receiving checks, you will have payments directly deposited into your checking or savings account.

2. The benefits of receiving payments electronically are no lost or stolen checks, no deposit delays, prompt availability of funds, fully traceable payments, and decrease in fraud.

3. EFT/Direct Deposit payments are available for vendors who have active contracts with the Corps sites within the Continental United States. Corps travelers working for these sites should also sign up for EFT.

4. Attached is Form UFC-DISB-4 with instructions that can be used by both vendors and travelers to sign up for Corps EFT payments.

5. Point of contact for questions is Michael Rye, commercial 901-874-8543, DSN 882-8543, Corps email address; t0rmfmtr@cefc.fc, Internet address;

Michael.T.Rye@usace.army.mil.

mailto:t0rmfmtr@cefc.fc mailto:Michael.T.Rye@usace.army.mil mailto:Michael.T.Rye@usace.army.mil

INSTRUCTIONS FOR COMPLETING FORM UFC-DISB-4

1. Vendors and/or travelers should indicate if this is an add as a new Direct Deposit to be set up or a change or cancellation. USACE employees already on payroll Direct Deposit who have not completed a travel form should mark ADD.

2. Include the Corps of Engineers District name (example: Savannah) or EROC (example: K6) that wrote the contract authorizing payment. If more than one District issued contracts, prepare a separate form for each District.

3. Include the name or Company as it appears on the invoice. If the contract was written to Bill and Betty Smith, the bill and Direct Deposit form should include both names not Bill Smith.

4. This address should be the physical address of the business.

5. The city and state that match the physical address.

6. The mailing address should include any and all Remit to/payment addresses that are different from the physical address. (If more space is needed, include an attachment page with all addresses listed). This is VERY IMPORTANT since we load the routing and bank account number on each payment address.

7. Include daytime phone number in case there are questions concerning the completed form.

8. Check if the bank account number furnished is a checking account.

9. Check if the bank account number furnished is a savings account.

10. Include bank account number, one number in each slot. This number can be found on the front of the check.

11. The full name of the bank for the account.

12/13. An accurate address for the bank.

14. The routing number for the bank. It is located on the face of the check.

This is always a nine digit NUMBER. Enter one number in each space.

15. Depositor account title is the name registered with the bank on the bank account.

16. For businesses include the IRS tax ID number. For an individual use the social security number.

17. Businesses should have a signature of an officer of the company.

Individuals should sign. If the Direct Deposit form/contract is written in the name of Bill and Betty Smith, both individuals should sign.

18. Date of the authorization.

DIRECT DEPOSIT AUTHORIZATION FORM

PRIVACY ACT STATEMENT

The following information is provided to comply with the Privacy Act of 1974 (P.L. 93-579). All information collected on this form is required under the provisions of 31 U.S.C. 3322 and 31 CFR 210. This information will be used by the Treasury Department to transmit data, by electronic means to vendor’s financial institution. Failure to provide the requested information may delay or prevent the receipt of payments through the Automated Clearing House Payment System.

I hereby authorized U. S. Army Corps of Engineer, hereinafter called USACE, to initiate direct deposit credit entries to my (our) account indicated below and the financial institution named below, hereinafter called DEPOSITORY, to credit the same to such account.

(1) Check One of the following Statements::

I am not currently participating in the Direct Deposit Program. OR I am currently participating in the Direct Deposit Program.

( ) ADD - Deposit my payment to the account shown. ( ) CHANGE – Change financial institutions and/or account number.

(2) Installation EROC

Name or (Company as shown on invoice):

(3)

Address:

(4)

City: State: Zip:

(5)

Mailing Address (if different):

(6)

Daytime Phone: ( ) (7)

Contract # (Optional):

If more than one contract, please list on a separate sheet.

Please ask your Financial Institution for your Depositor Account Number and Routing Number (Indicate which type account to credit)

Type of Depositor Account Please check a box.

Checking (8) Saving (9)

Depositor Account Number (10)

Name of Financial Institution:

(11)

Address:

(12)

City: State: Zip:

(13)

Routing Number:

(14) Depositor Account Title:

(15)

Tax ID Number (TIN) for Business:

(16)

SIGNATURE:_(17) DATE:_(18) ____

Mail To: USACE Finance Center, ATTN: EFT/DISB, 5722 Integrity Drive, Millington, TN 38054-5005

FORM: UFC-DISB-4

DISCLOSURE OF LOBBYING ACTIVITIES Approved by OMB

Complete this form to disclose lobbying activities pursuant to 31 U.S.C. 1352 0348-0046

(See reverse for public burden disclosure.)

1. Type of Federal Action: 2. Status of Federal Action: 3. Report Type:

a. contract a. bid/offer/application a. initial filing

b. grant b. initial award b. material change

c. cooperative agreement c. post-award For Material Change Only:

d. loan year _________ quarter _________

e. loan guarantee date of last report ______________

f. loan insurance

4. Name and Address of Reporting Entity: 5. If Reporting Entity in No. 4 is a Subawardee, Enter Name and Address of Prime:

Tier ______, if known :

Congressional District, if known : Congressional District, if known :

6. Federal Department/Agency: 7. Federal Program Name/Description:

CFDA Number, if applicable: _____________

8. Federal Action Number, if known : 9. Award Amount, if known :

10. a. Name and Address of Lobbying Entity b. Individuals Performing Services (including address if (if individual, last name, first name, MI): different from No. 10a )

(last name, first name, MI ):

(attach Continuation Sheet(s) SF-LLLA, if necessary)

11. Amount of Payment (check all that apply ): 13. Type of Payment (check all that apply ):

12. Form of Payment (check all that apply ):

nature __________ value __________

14. Brief Description of Services Performed or to be Performed and Date(s) of Service, including officer(s), employee(s), or Member(s) contacted, for Payment Indicated in Item 11:

(attach Continuation Sheet(s) SF-LLLA, if necessary)

15. Continuation Sheet(s) SF-LLLA attached:

16. Signature:

Print Name:

Title:

Telephone No.: _______________________ Date:

Authorized for Local Reproduction

Standard Form LLL (Rev. 7-97)

Information requested through this form is authorized by title 31 U.S.C. section 1352. This disclosure of lobbying activities is a material representation of fact upon which reliance was placed by the tier above when this transaction was made or entered into. This disclosure is required pursuant to 31 U.S.C. 1352. This information will be reported to the Congress semi-annually and will be available for public inspection. Any person who fails to file the required disclosure shall be subject to a civil penalty of not less that $10,000 and not more than $100,000 for each such failure.

Prime Subawardee actual planned a. retainer

b. one-time fee

c. commission

d. contingent fee

e. deferred

f. other; specify: _________________________

Yes No

a. cash

b. in-kind; specify:

Federal Use Only:

INSTRUCTIONS FOR COMPLETION OF SF-LLL, DISCLOSURE LOBBYING ACTIVITIES

This disclosure form shall be completed by the reporting entity, whether subawardee or prime Federal recipient, at the initiation or receipt of a covered Federal action, or a material change to a previous filing, pursuant to title 31 U.S.C. section 1352. The filing of a form is required for each payment or agreement to make payment to any lobbying entity for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with a covered Federal action. Use the SF-LLL-A Continuation Sheet for additional information if the space on the form is inadequate. Complete all items that apply for both the initial filing and material change report. Refer to the implementing guidance published by the Office of Management and Budget for additional information.

Identify the type of covered Federal action for which lobbying activity is and/or has been secured to influence the outcome of a covered Federal action.

Identify the status of the covered Federal action.2.

Identify the appropriate classification of this report. If this is a follow-up report caused by a material change to the information previously reported, enter the year and quarter in which the change occurred. Enter the date of the last previously submitted report by this reporting entity for this covered Federal action.

1.

3.

Enter the full name, address, city, state and zip code of the reporting entity. Include Congressional District, if known. Check the appropriate classification of the reporting entity that designates if it is, or expects to be, a prime or subaward recipient. Identify the tier of the subawardee, e.g., the first subawardee of the prime is the 1st tier. Subawards include but are not limited to subcontracts, subgrants and contract awards under grants.

4.

If the organization filling the report in item 4 checks "Subawardee", then enter the full name, address, city, state and zip code of the prime Federal recipient. Include Congressional District, if known.

5.

6. Enter the name of the Federal agency making the award or loan commitment. Include at least one organizational level below agency name, if known. For example, Department of Transportation, United States Coast Guard.

Enter the Federal program name or description for the covered Federal action (item 1). If known, enter the full Catalog of Federal Domestic Assistance (CFDA) number for grants, cooperative agreements, loans, and loan commitments.

7.

Enter the most appropriate Federal identifying number available for the Federal action identified in item 1 (e.g., Request for Proposal (RFP) number; Invitation for Bid (IFB) number, grant announcement number; the contract, grant, or loan award number; the application/proposal control number assigned by the Federal agency). Include prefixes, e.g., "RFP-DE-90-001."

8.

9. For a covered Federal action where there has been an award or loan commitment by the Federal agency, enter the Federal amount of the award/loan commitment for the prime entity identified in item 4 or 5.

10. Enter the full name, address, city, state and zip code of the lobbying entity engaged by the reporting entity identified in item 4 to influence the covered Federal action.

(a)

(b) Enter the full names of the individual(s) performing services, and include full address if different from 10 (a). Enter Last Name, First Name, and Middle Initial (MI).

11. Enter the amount of compensation paid or reasonably expected to be paid by the reporting entity (item 4) to the lobbying entity (item 10).

Indicate whether the payment has been made (actual) or will be made (planned). Check all boxes that apply. If this is a material change report, enter the cumulative amount of payment made or planned to be made.

12. Check the appropriate box(es). Check all boxes that apply. If payment is made through an in-kind contribution, specify the nature and value of the in-kind payments.

Check the appropriate box(ex). Check all boxes that apply. If other, specify nature.13.

14. Provide a specific and detailed description of the services that the lobbyist has performed, or will be expected to perform, and the date(s) of any services rendered. Include all preparatory and related activity, not just time spent in actual contact with Federal officials. Identify the Federal official(s) or employee(s) contacted or the officer(s), employee(s), or Member(s) of Congress that were contacted.

The certifying official shall sign and date the form, print his/her name, title, and telephone number.16.

Check whether or not SF-LLL-A Continuation Sheet(s) is attached.15.

Public reporting burden for the collection of information is estimated to average 30 minutes per response, including time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding the burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Office of Management and Budget, Paperwork Reduction Project (0348-0046), Washington, D.C. 20503.

This form was electronically produced by Elite Federal Forms, Inc.

DISCLOSURE OF LOBBYING ACTIVITIES

CONTINUATION SHEET

Approved by OMB 0348-0046

Reporting Entity: Page of

Authorized for Local Reproduction Standard Form - LLL-A

SF - LLL - A

UNCLASSIFIED\\FOR OFFICIAL USE ONLY

Bid Inquiry Contractor Report All Inquiries

Project: Combat Capabilities Development Command (CCDC) Building 3072 Renovation, Aberdeen Proving Ground (APG), Aberdeen, Maryland Review: W912DR-19-B-0018 (00001) (sorted by CommentID ) Displaying 27 inquiries.

Id Discipline Sheet Detail Spec

8148132 Equipment Page 3 of WRA Furniture Procurement Package Page 3

Comment Classification: UNCLASSIFIED (U)

Good afternoon

I am working with Ann Shieder at Allsteel on a response to the below bid. I noticed in WRA's FF&E Summary manufacturers such as Kimball/ Knoll/ Nucraft/ JSI, etc. have been specified. Is Grimberg looking for alternates to these manufacturers or has the end user already approved all of the items/ manufacturers in the FF&E Summary?

Please advise. I appreciate your help in advance.

On: Aug 19 2019.

Government Response. . Furniture selections have been reviewed and approved by the end user.

However, the manufacturer's references are used only to indicate the intended detail, color and pattern. It is not intended to limit the selection of other manufacturer's products of similar detail, color and pattern. All submitted manufacturer's will be evaluated based on performance criteria established by drawings and specifications. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8150443 Contracting M606 Comment Classification: UNCLASSIFIED (U)

Drawing M606 – Duct Construction Schedule notes medium pressure supply and outside air as 7" W.G. pressure class. SMACNA standards for medium pressure include 3", 4", and 6". There is no 7" W.G. pressure file in SMACNA.

Please confirm that 6" W.G. construction is acceptable for the medium pressure supply and outside air duct.

On: Aug 20 2019.

Government Response. . Duct pressure class of 6" W.G. construction is acceptable for the medium pressure supply and outside air duct. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8151853 Architectural CID Furnitue Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Are only accepting the manufactures that are the basis of design. Will equal consideration be given to other manufactures?

On: Aug 21 2019.

Government Response. . Furniture selections have been reviewed and approved by the end user.

However, the manufacturer's references are used only to indicate the intended detail, color and pattern. It is not intended to limit the selection of other manufacturer's products of similar detail, color and pattern. All submitted manufacturer's will be evaluated based on performance criteria established by drawings and specifications. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8152601 Construction Management D-101

Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Page 1 of 7ProjNet: Logged In User

9/3/2019https://www.projnet.org/projnet/binKornHome/index.cfm?strKornCob=BicPublicReportAll...

1) Do demolition and abatement workers needed to be US Citizen only. In the RFP Page 49 states services must be US citizens. But it also states, "In situations where work cannot be performed unless foreign nationals are utilized such as roof repairs these companies must ensure that an employee who is a US citizen serves as an escort and Foreign Nationals employed in this capacity must have valid green cards." The demolition and abatement industry is hard pressed to find any workers whom are US Citizens the same as any roofing company. Unfortunately, it is just not work a lot of US Citizens want to do anymore and are hard to find. We are only bidding the Demolition and Abatement part of this project. Since this is just demolition/abatement we are talking about and the building is being pretty much a complete gut out, I am hoping there is a bit more relaxed security level for our trade. Please let me know if we can use some Foreign Nationals with valid green card for demolition and abatement only as long as we provide a US Citizen to escort they during the project.

2) Where are the photos we were promised at the site walk since we were unable to take any pictures? I am unable to find any pictures.

3) Drawing D-101 Sheet Keynotes #8 – Remove topping slab. What is the material made of you want removed and how thick do you estimate it's depth?

On: Aug 21 2019.

Government Response. . 1) The paragraphed referenced on page 49 of the RFP allows staffing of foreign nationals if the following conditions are met:

• Foreign national employees possess a valid green card

• Foreign national employees are escorted by an employee who is a U.S. citizen

• Foreign national employees are not hired purely for reduction of labor costs in lieu of U.S. workers who are available See specification section 01 14 00 Work Restrictions for further discussion regarding employee requirements.

2) Photos are included in the plans and specifications. Any other photos may be taken by the contractor that wins this award. All photos must be taken with camera that has been approved by the Aberdeen Proving Ground Security.

3) Please review all demolition drawings. Additional information for the topping slab is shown on D-111.

On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8153348 General N/A N/A N/A Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

FBO shows drawings/attachments labeled as amendments #1-5, and amendment #6 is truly amendment #1. Would the Government please confirm that amendments #1-5 not be listed on the SF1442, and only amendment #6 dated 8-21-19 (amendment #1) be listed on the SF1442?

On: Aug 22 2019.

Government Response. . Only SF30 amendments are to be listed on the SF1442. Currently there are two (2) amendments. AMD01 dated 8-21-19 and AMD02 dated 8-22-19. Any additional SF30 amendments will need to be included also. On: Aug 27 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8153351 General N/A N/A N/A Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Would the Government please provide the attachments listed in amendment #1 dated 8-21-19?

On: Aug 22 2019.

Government Response. . The attachments are part of PDF file B.08.03_W912DR19B0018-0001.pdf. Use ADOBE ACROBAT to be able to see the attachments. On: Aug 27 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8154841 Design Team Leader Zoom Inc Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Page 2 of 7ProjNet: Logged In User

Zoom Inc is interested in bidding the above project.

1) Does the furniture installer need to have Dave Bacon Wages? Or is that just for the GC contractors?

2) Will furniture substitutes be accepted? If so, will the end user need to approve of substitutions?

On: Aug 22 2019.

Government Response. . 1. Davis-Bacon Wages apply to all workers employed directly on the site by contractors and their subcontractors.

2. Furniture selections have been reviewed and approved by the end user. However, the manufacturer's references are used only to indicate the intended detail, color and pattern. It is not intended to limit the selection of other manufacturer's products of similar detail, color and pattern. All submitted manufacturer's will be evaluated based on performance criteria established by drawings and specifications. On: Aug 29 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155642 General N/A N/A N/A Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Is it possible to schedule another site visit for GC's to walk subcontractors?

On: Aug 23 2019.

Government Response. . Unfortunately there is not enough time for another site visit. On: Aug 27 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155644 General N/A N/A N/A Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Is it possible to obtain as-built drawings for this building?

On: Aug 23 2019.

Government Response. . The as-built drawings will be available to the contractor who wins the award.

On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155668 General N/A N/A N/A Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

During the site walk on Tuesday 8/10/2019, it was noticed that in the ceiling cavity, and under the slab, there is a 2" thick, what seems to be glued wood boards that are 20"x 64" and seem to span the entire slab. please provide details on what this object is.

On: Aug 23 2019.

Government Response. . The material is believed to be sound deadening boards comprised of OSB.

Contractor to verify. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155669 Architectural N/A N/A N/A Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Please confirm for me that there are a total of 4 windows with 24 French Panes each that require the Fine Crystal film?

Also are all exterior windows on the first floor to receive security film?

On: Aug 23 2019.

Government Response. . There are a total of (9) windows receiving the decorative film. Decorative film "Fine Crystal" will be applied to Restrooms only. This includes (1) at the Basement Men's Restroom 028,

(4) on the First Floor Restrooms 126/127 and (4) on the Second Floor Restrooms 227/228. Decorative film is not required in windows located at rooms 122, S-2, 124, or mechanical chase South of elevator shaft as shown in the construction documents. See forthcoming amendment.

Page 3 of 7ProjNet: Logged In User

In the base bid, first floor windows do not receive a security film. If Option 2 is executed, existing windows on multiple floors are replaced with new windows containing a laminated lite. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155683 Specifications SECTION 10 51 13 Metal Lockers

Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

The specifications include a specification section for lockers which includes single tier, multi tier and cell phone lockers. The locker room only indicates a recessed locker which wee believe is for cell phones but no quantity of lockers is indicated. No other lockers are shown in the documents. Please confirm the number of cell phone lockers required and where the single and multi tier lockers are to be installed and the quantities of each or confirm these are not required by this project.

On: Aug 23 2019.

Government Response. . Sheet I-403 contains an enlarged plan and elevations that identify the cell phone lockers, single tier and double tier locker locations in the project. Metal Locker spec 10 51 13, sections 2.1.1, 2.1.2, and 2.1.3 identify quantities of lockers to provide. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155694 Specifications SECTION 10 26 00 Door and Wall Protection

Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

The specifications include a specification section for wall protection. No such corner guard locations are shown on the drawings. Please identify where these are to be installed or confirm this is not required by this project.

On: Aug 23 2019.

Government Response. . Corner guard locations are found on Interiors sheets I-103, I-104, and I-105.

On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155702 Interior Design I-601 Finish Schedule Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

The finish schedule does not indicate where the wall covering is required. Please identify the location(s) where required or confirm this is not required by this project.

On: Aug 23 2019.

Government Response. . Wall covering locations can be found on Interior finish plan sheets I-103, I-104, and I-105 as well as elevation sheets I-401, I-403, I-404, and I-405. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155704 Interior Design I-601 Finish Schedule Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

The finish schedule does not indicate where the elastomeric floor coating is required. Please identify the location(s) where required or confirm this is not required by this project.

On: Aug 23 2019.

Government Response. . The elastomeric floor coating is required in rooms where the finished floor calls for sealed concrete (SC). Refer to Interiors Room Finish Schedule. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155742 Architectural A-100 NA Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Page 4 of 7ProjNet: Logged In User

Is there any special construction requirements involved in the SCIF suite where the ceiling is an exposed exterior concrete deck?

On: Aug 23 2019.

Government Response. . There are no special construction requirements in the SCIF suite where the ceiling is an exposed concrete deck. Provide work as described in contract documents. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155745 Other N/A 01 45 35 Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Does the prime contractor own the third party special inspections involved with the construction of the basement SCIF area?

On: Aug 23 2019.

Government Response. . The Contractor is responsible for the provision of "special inspections", as defined by IBC for concrete, steel, etc. and as specified by the contract documents throughout the building and project site.

However, any inspections of the SCIF perimeter envelope or SCIF systems that must be performed as specified in ICD/ICS 705 Chapter 13 as part of the Fixed Facility Checklist will be performed by the government. The Prime Contractor must coordinate with the government to allow these inspections to occur and must receive approvals for these SCIF wall components and associated equipment before construction of adjacent components (e.g.90165 furred out walls, etc.) can occur. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155746 Architectural A-100 and A-203 NA Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Do the (3) windows located at column line F and D.1 get infilled as noted on A.100 or do they receive new windows per A.203?

If the windows do get infilled are we to reinstall the existing security bars?

On: Aug 23 2019.

Government Response. . (3) New windows are to be installed at Conference room 017. They are window type W1A. The interior side will be infilled with the typical interior wall construction, Refer to Window H3/J3/S3 on A-615 for details.

For SHPO requirements, all basement windows are to have an appearance consistent with existing conditions. Reinstall refurbished steel window guards at all locations indicated in the documents. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155747 Architectural A-204 NA Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

On sheet A.204 please confirm if the window W.1 has another designation noted, the label is hidden on the drawing.

On: Aug 23 2019.

Government Response. . Basement window on Detail E4 is window type (W1). Tag underneath was duplicated. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155749 Architectural A-100 NA Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

On sheet A.100, does the window is Office 012 get infilled on the exterior or does this location receive a new window?

Page 5 of 7ProjNet: Logged In User

On: Aug 23 2019.

Government Response. . Office 012 will receive a new window (Type W1A). There is no exterior infill at this window. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155751 Other A-100 NA Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

What is required of the existing slabs above and below the new SCIF space to received accreditation? Is any work required to the existing slabs above and below SCIF suite?

On: Aug 23 2019.

Government Response. . Other than work indicated in the contract documents, there are no additional or special construction requirements involved in the SCIF. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155755 Architectural D-103 NA Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

D-103 shows all existing dormers as dotted line. Does this indicate they are to be demolished? There is no associated note indicating demolition or put back framing to match existing roof slope.

On: Aug 23 2019.

Government Response. . Dormers will not be demolished. They are to remain. Dashed line at dormers indicate they are "above". On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155758 Civil C-104 NA Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

8) Has the erosion and sediment control plan been submitted to MDE for approval?

On: Aug 23 2019.

Government Response. . Erosion and sediment control plan has been submitted to MDE and is in review. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155778 Specifications Section 01 14 00 MISSING Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Refer to Section 01 14 00 "Work Restrictions". 1.7.2 refers to Section 01 56 10 "Environmental Protection". This section has not been provided. Please provide section 01 56 10.

On: Aug 23 2019.

Government Response. . USACE has issue this specification as amendment 1. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155781 Civil N/A N/A Section 31 23 00.00 20 "Excavation and Fill"

Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Refer to Section 31 23 00.00 20 "Excavation and Fill". 3.3 says "Excavations below indicated depths will not be permitted except to remove unsatisfactory material. Unsatisfactory material encountered below the grades shown shall be removed as directed." Will removal and replacement of unsatisfactory material be paid as an Extra, or should this be included in the Bid?

On: Aug 23 2019.

Page 6 of 7ProjNet: Logged In User

Government Response. . All work required by this section is to be included in the bid. On: Sep 03 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155783 Specifications Spec 33 40 00 N/A MISSING Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

Spec 33 40 00 is provided for Storm Drainage Utilities. No specs have been provided for Sanitary Sewer or the Water Service. Please provide specs.

On: Aug 23 2019.

Government Response. . As indicated on C-101, all water and sewer shall be in accordance with the Harford County Standards and Specifications for Water and Sewer (The City of Aberdeen uses Harford County specs) On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

8155785 Civil C-104 N/A N/A Comment Classification: Unclassified\\For Official Use Only (U\\FOUO)

The Stabilized Construction Entrance is located over the existing parking lot. Please confirm this is the correct location.

On: Aug 23 2019.

Government Response. . The revised MDE plan relocates the Stabilized Construction Entrance off the parking lot. SCE will be rotated 90 deg extending from the parking lot adjacent to mechanical enclosure.

Location will be clarified in forthcoming amendment. On: Aug 29 2019 Current Request Status: Request Closed

Information for this report is procurement sensitive.

Report Complete

UNCLASSIFIED\\FOR OFFICIAL USE ONLY

Patent 11/892,984 ProjNet property of ERDC since 2004.

Page 7 of 7ProjNet: Logged In User

Question: Amendment 1 includes ATF compliant windows. Please provide us with the charge, set off distances, etc. per the UFC to determine the window construction.

Response: UFC 4-010-01 Standard 10 (3-11) states in the first paragraph: Glazing that is in compliance with this standard is not required to be designed or constructed for blast resistance. It is intended to minimize hazardous glazing fragments.

Charge weight, stand-off distance, required level of protection, or blast calculations are no longer necessary for the determination/selection of UFC 4-010-01 compliant glazing. The window or curtain wall frames only have to be designed for environmental loads like wind and seismic forces.

Background: UFC 4-010-01 was revised in December of 2018 and the revised version of the standards in Chapter 3 of this UFC are applicable to this project. As previously directed by USCOE, only the minimum standards in Chapter 3 are applicable to this building. According to Standard 1 (3-2), existing buildings are exempt from standoff distances requirement. Since only minimum standards are applicable, the exterior glazing is not required to be designed to resist a specific blast, but instead the inner pane of glass must be fabricated of laminated glass meeting the requirements of Standard 10 (3-11) already included in the Contract Documents in specification sections 08 41 13, 08 51 13, 08 81 00 to minimize flying hazardous debris.

Please see WBDG.org for the most current version of UFC 4-010-01.

"General Decision Number: MD20190034 08/09/2019

Superseded General Decision Number: MD20180048

State: Maryland

Construction Type: Building

County: Harford County in Maryland.

BUILDING…