B.08.02_Option_1_-_CID_FFE_Procurement_Package.pdf

The Renovation of Building 3072

Aberdeen Proving Ground, MD

2 AUGUST 2019

Contract No. W912DR-16-D-0005

Comprehensive Interior Design (CID) - Furniture Procurement Package

TABLE OF CONTENTS

Page i

Table of Contents

PROJECT INTRODUCTION ____________________________________________________________ 1

1.1 OBJECTIVES ____________________________________________________________________ 1

1.2 PROCUREMENT METHOD _________________________________________________________ 1

1.3 FURNITURE REVIEW MEETINGS ____________________________________________________ 1

FURNITURE PROCUREMENT SHEETS ___________________________________________________ 2

2.1 FURNITURE SUMMARY SHEET _____________________________________________________ 2

2.2 FURNITURE PROCUREMENT SHEETS ________________________________________________ 2

2.3 FURNITURE FOOTPRINT PLANS _____________________________________________________ 2

Appendices

APPENDIX 1 – FURNITURE REVIEW MEETINGS

APPENDIX 2 – FURNITURE FOOTPRINT PLANS

TABLE OF CONTENTS

Page ii

This page is left blank intentionally

PROJECT INTRODUCTION

PROJECT INTRODUCTION

1.1 OBJECTIVES

This document contains the Basis of Design furniture and equipment for Renovation of Building 3072, Aberdeen Proving Ground.

This document records the specifications of the basis of design products for all systems furniture, freestanding furniture and ancillary equipment items deemed necessary to provide a comfortable and efficient work environment.

1.2 PROCUREMENT METHOD

Furniture will be provided and installed under this construction contract and is identified as a Bid Option; CLIN 0004 in the project’s Price Schedule. The General Contractor will coordinate installation with the furniture vendor/installer in order to deliver a usable facility coinciding with the Beneficial Occupancy Date. The furniture vendor/installer contract will include all electrical pre-wiring and the whips for connection to the building electrical systems, however; the General Contractor will make the final connections to these systems.

1.3 FURNITURE REVIEW MEETINGS

Furniture review meetings were held during the month of July 2019. A summary of minutes from furniture review meetings is in Appendix 1.

Furniture needs were preliminarily discussed during user interviews, and Comprehensive Interior Design (CID) services were added to the project scope as an additional service near the end of project completion. Knowledge gained from initial user interviews was used to develop a conceptual furniture package that was refined during the month of July 2019 with furniture review meetings. The furniture review meetings helped to further define specific furniture and equipment needs concurrent with final design of the procurement package.

FURNITURE PROCUREMENT

FURNITURE PROCUREMENT

2.1 FURNITURE SUMMARY SHEET

Furniture summary sheet is an upfront spreadsheet listing every item code, a brief general description of each item, and the basis of design manufacturer for every piece of furniture and equipment to be procured.

A summary sheet with unit costs and extended costs for each item along with an estimated product total, applicable sales tax, estimated installation and delivery fee, and design/project management fees will be included under separate cover.

2.2 FURNITURE PROCUREMENT SHEETS

Itemized furniture procurement sheets are provided in this document for each furniture and equipment item that will purchased for use in this building. Each sheet outlines a basis of design piece of furniture or equipment that has been given an item code, an image of the product, a product description of salient features, finishes, overall quantity and any special instructions. Item codes correspond to the furniture plans and furniture schedule in the construction documents.

2.3 FURNITURE FOOTPRINT PLANS

Located in Appendix 2 are the furniture footprint plans. These drawing sheets include all furniture plans with corresponding item codes tagged and shown in a furniture schedule. Also included are enlarged plans, elevations and isometric drawings of every project-specific workstation type. These drawings are dimensioned and noted to identify all required panels, worksurfaces, storage components, task lighting, and any electrical, voice or data requirements.

FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY

BASE: Aberdeen Proving Ground WORK ORDER #90246-020 PROJECT: BLDG 3072 Renovation 8/2/2019

CODE QTY ITEM DESCRIPTION MANUFACTURER UNIT COST SUBTOTAL

PO-01 32 U-SHAPED PRIVATE OFFICE KIMBALL OFFICE

WS-01 124 L-SHAPED 6 X 8 WORKSTATION KNOLL

WS-01A 2 L-SHAPED 6 X 7 WORKSTATION KNOLL

WS-02 6 L-SHAPED 6 X 10 WORKSTION KNOLL

WS-03 10 L-SHAPED 6 X 8 ADMIN WORKSTATION KNOLL

WS-04 3 TOUCH DOWN WORKSTATION 24" X 60" KNOLL

WS-05 2 A/V OPERATOR'S WORKSTATION NATIONAL OFFICE

C-01 175 TASK CHAIR KNOLL

C-02 83 CONFERENCE CHAIR VIA SEATING

C-03 45 CONFERENCE SIDE CHAIR VIA SEATING

C-04 82 OFFICE GUEST CHAIR KNOLL

C-05 16 MULTI-PURPOSE STOOL KNOLL

C-06 1 RECLINER GLOBAL FURNITURE

C-07 8 MULTI-PURPOSE STACKING CHAIR KNOLL

C-08 2 LOUNGE CHAIR OFS

T-01 1 CONFERENCE TABLE 54/72" X 192" NUCRAFT

T-02 2 CONFERENCE TABLE 36/54" X 144" NUCRAFT

T-03 2 CONFERENCE TABLE 36/50" X 120" NUCRAFT

T-04 2 CONFERENCE TABLE 54/72" X 216" NUCRAFT

T-05 9 SMALL MEETING TABLE KNOLL

T-06 4 MEETING TABLE NUCRAFT

T-07 1 CONFERENCE TABLE 32/40" X 72" NUCRAFT

T-08 1 HALF TRACK MEETING TABLE JSI

T-09 1 SIDE TABLE ARCADIA

T-10 4 MULTI-PURPOSE TABLE 36" X 72" GLOBAL FURNITURE

S-01 24 3-HIGH LATERAL FILE KNOLL

S-02 11 5-HIGH LATERAL FILE KNOLL

S-03 12 STORAGE CABINET KNOLL

S-04 4 5-SHELF BOOKCASE KNOLL

S-05 3 4-DOOR CREDENZA NUCRAFT

S-06 3 OPEN METAL SHELVING GLOBAL INDUSTRIAL

REQ-01 5 REFRIGERATOR GE

REQ-02 4 UNDERCOUNTER REFRIGERATOR SUMMIT

REQ-03 7 MICROWAVE GE

REQ-06 3 ROUND TRASH CAN GLOBAL INDUSTRIAL

REQ-10 36 WHITE BOARD 36" X 60" EGAN

REQ-10A 8 WHITE BOARD 48" X 72" EGAN

REQ-11 182 PERSONAL WASTE RECEPTACLE GLOBAL INDUSTRIAL

REQ-19 1 FULL LENGTH MIRROR BOBRICK

REQ-22 5 TACKBOARD 48" X 48" EGAN

REQ-23 3 ANALOG WALL CLOCK PETER PEPPER

REQ-24 175 WORKSTATION SIGNAGE 2/90 SIGN SYSTEMS

TABLES

CHAIRS

DESKING

ACCESSORIES

STORAGE

Item Number:

EMAIL:

Qty: 32 Unit Cost: $0.00 Price Total: $0.00

Metal Finish: Platinum Metallic (501)

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: U-SHAPED PRIVATE OFFICE

PO-01

Source: Photo:

KIMBALL OFFICE

POC: Judi Miller 410-404-5374

Model #:

Item Description: U-Shaped Priority Desks and Components

Jmiller@moii.com

Wood Veneer Finish:

Midtown Walnut

Wood Height-Adjustable Facet Desk 30"D x 72"W x 28.75"H (53K3072DFHAW) with Softened Wood Rim profile with left and right platinum metallic grommets (G19LR501). Include wire manager below worksurface (53K0872CTFHAP). Metal shroud platinum metallic (501).

Wood Return Worksurface 42"W x 24"D (53K2442WBSW) with End Panels and Hinged Technology Modesty Panel (53KE4025MPTW) to access wall outlets, left and right grommets (G19LR).

Wood Storage Credenza comprised of 72"W x 24"D worksurface (53K2472WBSW) with left and right grommets (G19LR), pedestal undersurface box/box/file (53KE2415PUBBFSW) and 2 drawer lateral file (53KE2430LFM2SW).

Wood Modesty Panel with Facet Desk 62"W x 9"H (53K1272MPF).

Wood Vertical Storage Wardrobe, right handed (53K1567VWHRW).

Wood Combo Bookcase/2-Dwr Lateral File (53KE1567VBFFW).

Location:

Private Offices

Wood Highback Organizer 66"W x 38"H with non-locking wood doors (53K6638HBHW) with tackpanel and LED tasklight.

Finish Samples:

Tack Panel Fabric:

Kimball Basket- Key Lime 10605

Markerboard Tile, 14"H located on user side of 30"W wing panel.

Qty: 124 Unit Cost: $0.00 Price Total: $0.00

(1) Fixed box/box/file steel front drawer below fixed worksurface.

Location:

Finish Samples:

Panel Fabric: Knoll Textiles: Reflect W884/4A, Steel

Accent Panel Fabric:

Maharam: Emit - Goldenrod 466378-008

Worksurface Wood Laminate: Walnut 127

Metal Trim Paint: Silver 613

Open Office Areas

(1) Series 2 steel front 48"H X 24"W X 23.5"D Storage Tower w/ (2) file drawers and door, w/left hand wardrobe unit, Template pull.

(2) Sliding Door Overhead Storage Cabinets, panel up-mounted, Dividends front, steel door, 36"W X 14"H with lock and brackets.

(1) Highwire Undercabinet Individual Light, 19W (35 LEDs) with (1) Highwire Undercabinet Light, Interconnected Adder with 12" jumper.

(1) Fixed Rectangular Worksurface, 72"W X 24"D with grommet. J-wire managers, 30" and 36"W under mount below worksurface, silver.

(1) k. Stand Ht. Adj. Table base with C-Leg, Standard Electric, Adjustable Width Base w/glides, standard switch. Rectangular surface 46"W X 23"D.

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #:

Item Description: 6' X 8' Knoll Dividends Systems Furniture

Jmiller@moii.com

Powered panels: Base infeed and power at beltline, above worksurface.

Accent panel tiles located on spine wall panels below overhead units.

Panel Heights: 50"H, Combination of powered and unpowered panels.

Extent of powered panels and panel widths indicated on drawings.

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: L-SHAPED 6 X 8 WORKSTATION

WS-01

Markerboard Tile, 14"H located on user side of 30"W wing panel.

Qty: 2 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: L-SHAPED 6 X 7 WORKSTATION

WS-01A

Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #:

Item Description: 6' X 8' Knoll Dividends Systems Furniture

Jmiller@moii.com

Powered panels: Base infeed and power at beltline, above worksurface.

Accent panel tiles located on spine wall panels below overhead units.

Source:

Panel Heights: 50"H, Combination of powered and unpowered panels. Extent of powered panels and panel widths indicated on drawings.

(2) Sliding Door Overhead Storage Cabinets, panel up-mounted, Dividends front, steel door, 36"W X 14"H with lock and brackets. Finish Samples:

Panel Fabric: Knoll Textiles: Reflect W884/4A, Steel

Accent Panel Fabric:

Maharam: Emit - Goldenrod 466378-008

Open Office Areas

Worksurface Wood Laminate: Walnut 127

Metal Trim Paint: Silver

(1) Quoin Locker, 50"H X 15"W X 24"D, Full Door Left, Steel Top, Flat Steel Front with 5" Finger Pull, locking.

(1) Highwire Undercabinet Individual Light, 19W (35 LEDs) with (1) Highwire Undercabinet Light, Interconnected Adder with 12" jumper.

(1) Fixed Rectangular Worksurface, 72"W X 24"D with grommet. J-wire managers, 30" and 36"W under mount below worksurface, silver.

(1) k. Stand Ht. Adj. Table base with C-Leg, Standard Electric, Adjustable Width Base w/glides, standard switch. Rectangular surface 46"W X 23"D.

(1) Fixed box/box/file steel front drawer below fixed worksurface.

Location:

Markerboard Tile, 14"H located on user side of 30"W wing panel.

Qty: 6 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: L-SHAPED 6 X 10 WORKSTION

WS-02

Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #:

Item Description: 6' X 10' Knoll Dividends Systems Furniture

Jmiller@moii.com

Powered panels: Base infeed and power at beltline, above worksurface.

Accent panel tiles located on spine wall panels below overhead units.

Source:

Panel Heights: 50"H, Combination of powered and unpowered panels.

Extent of powered panels and panel widths indicated on drawings.

(2) Sliding Door Overhead Storage Cabinets, panel up-mounted, Dividends front, steel door, 48"W X 14"H with lock and brackets. Finish Samples:

Panel Fabric: Knoll Textiles: Reflect W884/4A, Steel

Accent Panel Fabric:

Maharam: Emit - Goldenrod 466378-008

Open Office 019

Worksurface Wood Laminate: Walnut

Metal Trim Paint: Silver 613

(1) Series 2 steel front 48"H X 24"W X 23.5"D Storage Tower w/ (2) file drawers and door, w/left hand wardrobe unit, Template pull.

(1) Highwire Undercabinet Individual Light, 37W (70 LEDs) with (1) Highwire Undercabinet Light, Interconnected Adder with 12" jumper.

(1) Fixed Rectangular Worksurface, 96"W X 24"D with grommet. J-wire managers, 30" and 42"W under mount below worksurface, silver.

(1) k. Stand Ht. Adj. Table base with C-Leg, Standard Electric, Adjustable Width Base w/glides, standard switch. Rectangular surface 46"W X 23"D.

(1) Fixed box/box/file steel front drawer below fixed worksurface.

Markerboard Tile, 14"H located on user side of 30"W wing panel.

Qty: 10 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: L-SHAPED 6 X 8 ADMIN WORKSTATION

WS-03

Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #:

Item Description: 6' X 8' Admin Knoll Dividends Systems Furniture

Jmiller@moii.com

Powered panels: Base infeed and power at beltline, above worksurface.

Accent panel tiles located on spine wall panels below overhead units.

Source:

Panel Heights: 50"H, Combination of powered and unpowered panels.

Extent of powered panels and panel widths indicated on drawings.

(2) Sliding Door Overhead Storage Cabinets, panel up-mounted, Dividends front, steel door, 36"W X 14"H with lock and brackets.

Location:

Open Office Areas

(1) Fixed box/box/file steel front drawer below fixed worksurface.

Finish Samples:

Panel Fabric: Knoll Textiles: Reflect W884/4A, Steel

Accent Panel Fabric:

Maharam: Emit - Goldenrod 466378-008

Worksurface Wood Laminate: Walnut

Metal Trim Paint: Silver 613

(1) Series 2 steel front 48"H X 24"W X 23.5"D Storage Tower w/ (2) file drawers and door, w/left hand wardrobe unit, Template pull.

(1) 42"H X 48"W Non-powered panel topped with Transaction Counter Worksurface, 48"W X 15"D.

(1) Highwire Undercabinet Individual Light, 19W (35 LEDs) with (1) Highwire Undercabinet Light, Interconnected Adder with 12" jumper.

(1) Fixed Rectangular Worksurface, 72"W X 24"D with grommet and J-wire managers, 30" and 36"W under mount below worksurface, silver.

(1) Ht. Adj. Rectangular Worksurface, 46"W X 23"D with T-legs and electronic lift mechanism.

Screen Fabric: Thorn

Qty: 3 Unit Cost: $0.00 Price Total: $0.00

Table Leg, Grommet and Screen Trim: Anodized Aluminum

Laminate Top: Knoll Laminate, Walnut 127

Rectangular laminate table top with T-legs; one 3.25" grommet per worksurface; molded Platinum edgeband.

Propeller Privacy Screen with Fabric Interior and privacy screen attachment clamps.

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: P2-C15/P2-SC2418/P2-SC-BKT-PSD

Item Description: Propeller Rectangular Training Table w/Screens

Jmiller@moii.com

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: TOUCH DOWN WORKSTATION 24" X 60"

WS-04

Table Dimensions: Width 60", Depth 24", Height 28.5" Privacy Screen Dimensions: Width 22.5", Depth 1", Height 18"

Finish Samples:T-leg available with glides.

SIPR Kiosk Room

Qty: 2 Unit Cost: $0.00 Price Total: $0.00

PROJECT: BLDG 3072 Renovation Item Name: A/V OPERATOR'S WORKSTATION

WS-05

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019

Worksurface Height: 28-15/16"H Four Dual Wheel Locking Casters Includes Mesh Cord Manager and Worksurface Power Director Plain sliced bookmatched walnut wood veneer surfaces.

Grommet in worksurface top.

Wood Veneer Finish:

Sable on Walnut 792

Source: Photo:

NATIONAL OFFICE

POC: Judi Miller 410-404-5374

Model #: WW2436MCCW

Item Description: National Waveworks Mobile Computer Cart

Jmiller@moii.com

Dimensions: 27-3/16"D x 36-1/8"W x 43-1/4"H

Leg Finish:

Silver Platinum 508

Finish Samples:

Conference 017

Flex Back: Onyx

Seat Fabric: Generation Fabric, Espresso

Qty: 175 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: TASK CHAIR

C-01

Dimensions: Overall Width 28.5", Overall Depth 26", Overall Height 39.25"-44.5", Seat Depth 15"-18", Seat Width 21", Seat Height 16.5"- 21.75"

High performance arms adjust up down, width, depth, and pivot. Arm pads measure 9.6" long X 4.3" wide.

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: 111HP2LXHC

Item Description: Generation by Knoll Work Chair

Jmiller@moii.com

Finish Samples:

All private offices, all workstations

Flex back and Flex top (folds up to 90 degrees rearward): Integrally colored, high performance eastomer and glass reinforced polyester structure. Syncronized recline seat back.

No additional lumbar support.

Black plastic five star base, low cylinder, hard casters for carpet floors.

Ultra seat foam: High-resiliency molded urethane foam. Upholstered.

Mesh Back: Black

Seat Fabric: Brisa Original, Black Onyx

Qty: 83 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: CONFERENCE CHAIR

C-02

Dimensions: Overall width 21", Overall depth 26", Seat depth 18.8", Seat height 16.7"-21.4"

Source: Photo:

VIA SEATING

POC: Judi Miller 410-404-5374

Model #: 441B74C39A18BB16HPFB

Item Description: GenieFlex Medium Seat

Jmiller@moii.com

Medium seat, black Body Balance control mechanism with seat slider.

Adjustable height roll back arm, black finish with static arm cap Black nylon five star base with black carpet casters Finish Samples:

Black mesh flex back Upholstered seat, Grade 5

All conference rooms

Frame: Silver Mesh Back: Black

Upholstered Seat: Knoll Textiles, Bistro/Lemon Drop Qty: 45 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: CONFERENCE SIDE CHAIR

C-03

Source: Photo:

VIA SEATING

POC: Judi Miller 410-404-5374

Model #: 312-S-49A-01VB

Item Description: Vista II Mesh Back Guest Chair

Jmiller@moii.com

Silver frame with grey glides.

Polyurethane arm, grey finish; fixed.

Black mesh back.

Dimensions: Overall width 25.8", Overall depth 26", Overall height 33.4", Seat width 21.8", Seat depth 18.4" Mesh back and upholstered seat; high density, cold-cured, injection molded, CFC-free foam seat.

Finish Samples:

Chairs stack two high.

All conference rooms

Frame: Warm Brown Walnut

Fabric: CF Stinson, Nova/Spotlight Qty: 82 Unit Cost: $0.00 Price Total: $0.00

Dimensions: Overall width 21.75", Overall depth 23.5", Overall height 32.25", Seat height 18.5", Arm height 26" Fully upholstered seat and back, high density polyurethane foam. Seat has elastic seat belt suspension.

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: OFFICE GUEST CHAIR

C-04

Finish Samples:

Chair does not stack.

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: 37A-U

Item Description: Ricchio Arm Chair

Jmiller@moii.com

Recessed plastic glides.

Chair finished with a catalyzed lacquer protective coating and a hand-applied final wax coating.

Frame in Beech wood with stained finish.

Frame uses dowel and mortise and tenon construction.

All private offices

Shell color: Dark Grey, DG

Frame Finish: Silver

Qty: 16 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: MULTI-PURPOSE STOOL

C-05

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: 2CCNX-4-DG

Item Description: MultiGeneration by Knoll Counter-Height Stool

Jmiller@moii.com

Dimensions: Width 18.6", Depth 23.4", Height 41.7", Seat height 26.7" Armless.

Open design allows for 270 degree sitting.

Passive flex encourages natural movement.

Perforated back provides airflow and coordinates with Generation by Knoll family of chairs.

Finish Samples:

Footrest allows for various positions while still being supported.

No seat pad.

Collaboration Spaces with T-06 table

Rolled top edge serves as an armrest when side sitting, or handle for transporting.

Wood Armcap: Medium Walnut

Upholstery: CF Stinson- Etch/Taupe

Qty: 1 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: RECLINER

C-06

Standard non-slip adjustable glides.

Dimensions: Overall Width 30", Overall Depth 31.5", Overall Height 43.5", Seat Width 21.5", Seat Depth 19.5", Seat Height 18"

Seat standard with high density Ultracell foam; Cleanout space is provided between he seat and back cushions for easy cleaning.

Source: Photo:

GLOBAL FURNITURE

POC: Judi Miller 410-404-5374

Model #: GC4172

Item Description: GlobalCare Coast Glider

Jmiller@moii.com

Finish Samples:

Medium walnut wood armcap.

Fully upholstered.

Mother's Room

Arms fixed with a grip allowing easy entry/exit from chair combined with a smooth low-range motion mechanism, eliminating the need for a locking mechanism.

Shell color: Dark Grey, DG

Frame Finish: Silver

Qty: 8 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: MULTI-PURPOSE STACKING CHAIR

C-07

Dimensions: Width 25.6", Depth 21.4", Height 33.6", Seat Height 17.3", Arm Height 26.8" Open Design: Full, curved back allows for upper body movement and supports the lower back for upright, interactive postures; gently contoured seat with rounded corners and cantilevered arm designs lets user shift positions easily.

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: 2SANXGL

Item Description: MultiGeneration by Knoll Stacking Chair

Jmiller@moii.com

Finish Samples:

Pantries

Perforated back provides airflow and coordinates with Generation by Knoll family of chairs.

Rolled top edge serves as an armrest when side sitting, or handle for transporting.

Arms feature contoured pads to lean against when sitting.

No seat pad.

Shroud: Root, NWP Fabric A: Designtex- Heather/Stone

Fabric C: CF Stinson- Eddy/Sunflower

Qty: 2 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: LOUNGE CHAIR

C-08

Source: Photo:

OFS

POC: Judi Miller 410-404-5374

Model #: 89441

Item Description: LeanTo Lounge Single Seat Unit

Jmiller@moii.com

Includes Upholstered High Back Surround, Outside Back Panel, and Base with Shroud, Work Tablet, Large Pillow and Two Small Pillows.

Upholstered Highback Surround for privacy, and Upholstered Outside Back Panel and Base - Fabric A

Outside Dimensions w/Shroud: 58.75"W, 31.25"D, 75.75"H Seat Dimensions: Seat width 38.25", Seat depth 21.5", Seat ht 18.5" Shroud: High Pressure wood laminate finish, NWP. No power or light.

Finish Samples:

Upholstered Inset Back Panel - Fabric B Upholstered Seat and cushions - Fabric C Sinuous springs in seat.

Lobby

Two small pillows, 89P1: 18"Wx7"Dx4"H - Fabric C

Fabric B: Maharam- Messenger/Bayou

One large pillow, 89P2: 18"Wx10"Dx4"H - Fabric C Solid Surface Work Tablet, Right facing (UQ), Corian/Cameo White Work tablet Dimensions: 22.29"W, 14.84"D, 1"H

Standard Wood Veneer Finish:

Walnut, Marron M35 - Matte

Edge Detail: Reverse Flow Qty: 1 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: CONFERENCE TABLE 54/72" X 192"

T-01

Source: Photo:

NUCRAFT

POC: Judi Miller 410-404-5374

Model #: FWNB-19272-V-VP

Item Description: Flow Veneer Boat Top with Panel Bases

Jmiller@moii.com

Table top comes in 4 sections.

Boat-Shaped Wood Conference table top Width 54"-72", Height 29.5", 1- 1/8" Thick with 3/16" deep hardwood edge band.

(3) Wood Panel Bases - (2) ends and (1) center panel with wire management openings.

Finish Samples:Small Power Matrix with Single Wood Door (PM-SM-W) 6"W x 5.375"D Data/AV Faceplates: (2) Simplex Outlets, (2) Blank Faceplates, (1) Data Faceplate (contains two RJ-45 data connectors).

(1) Power Matrix located at center of table (PS-1).

Conference Room

(1) 15-amp 12' plug-in infeed power cord to plug into a floor box.

Reverse Flow Edge Detail.

Standard Wood Veneer Finish:

Walnut, Marron M35 - Matte

Edge Detail: Reverse Flow Qty: 2 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: CONFERENCE TABLE 36/54" X 144"

T-02

Source: Photo:

NUCRAFT

POC: Judi Miller 410-404-5374

Model #: FWNB-14454-V-VP

Item Description:

Jmiller@moii.com

Table top comes in 2 sections.

Boat-Shaped Wood Conference table top Width 36"-54", Height 29.5", 1-1/8" Thick with 3/16" deep hardwood edge band.

(2) Wood Panel Bases - (2) ends with wire management openings.

Finish Samples:

(1) Power Matrix located at center of table (PS-1).

(1) 15-amp 12' plug-in infeed power cord to plug into a floor box.

Small Power Matrix with Single Wood Door (PM-SM-W) 6"W x 5.375"D Data/AV Faceplates: (2) Simplex Outlets, (2) Blank Faceplates, (1) Data Faceplate (contains two RJ-45 data connectors).

Reverse Flow Edge Detail.

Conference Room

Standard Wood Veneer Finish:

Walnut, Marron M35 - Matte

Edge Detail: Reverse Flow Qty: 2 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: CONFERENCE TABLE 36/50" X 120"

T-03

Source: Photo:

NUCRAFT

POC: Judi Miller 410-404-5374

Model #: FWNB-12050-V-VP

Item Description:

Jmiller@moii.com

Table top comes in 1 section.

Boat-Shaped Wood Conference table top Width 36"-50", Height 29.5", 1-1/8" Thick with 3/16" deep hardwood edge band.

Small Power Matrix with Single Wood Door (PM-SM-W) 6"W x 5.375"D Data/AV Faceplates: (2) Simplex Outlets, (2) Blank Faceplates, (1) Data Faceplate (contains two RJ-45 data connectors).

(2) Wood Panel Bases - (2) ends with wire management openings.

Finish Samples:

(1) Power Matrix located at center of table (PS-1).

(1) 15-amp 12' plug-in infeed power cord to plug into a floor box.

Reverse Flow Edge Detail.

Standard Wood Veneer Finish:

Walnut, Marron M35 - Matte

Edge Detail: Reverse Flow Qty: 2 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: CONFERENCE TABLE 54/72" X 216"

T-04

Source: Photo:

NUCRAFT

POC: Judi Miller 410-404-5374

Model #: FWNB-21672-V-VP

Item Description:

Jmiller@moii.com

Table top comes in 4 sections.

Boat-Shaped Wood Conference table top Width 54"-72", Height 29.5", 1- 1/8" Thick with 3/16" deep hardwood edge band.

(3) Wood Panel Bases - (2) ends and (1) center panel with wire management openings.

Finish Samples:

(1) Power Matrix located at center of table (PS-1).

Small Power Matrix with Single Wood Door (PM-SM-W) 6"W x 5.375"D Data/AV Faceplates: (2) Simplex Outlets, (2) Blank Faceplates, (1) Data Faceplate (contains two RJ-45 data connectors).

(1) 15-amp 12' plug-in infeed power cord to plug into a floor box.

Conference Room

Reverse Flow Edge Detail.

Top Finish: Midtown Walnut

Qty: 9 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: SMALL MEETING TABLE

T-05

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: K78TRND3027LL

Item Description: Bloom Round Occasional Table

Jmiller@moii.com

Dimensions: Diameter 30", Height 27" Chat TFL Woodgrain Laminate table top Softened vinyl edgeband Silver base as shown in photo Glides

Finish Samples:

Director Private Offices

Laminate Finish: Midtown Walnut

Qty: 4 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: MEETING TABLE

T-06

Photo:

NUCRAFT

POC: Judi Miller 410-404-5374

Model #: 70K487841TAL

Item Description: Dock Standing-Height Work Table

Jmiller@moii.com

Center modesty panel is 3/4" thick, extended from underside of worksurface to the floor for strength and stability.

Dimensions: Width 78", Depth 48", Height 41" Adjustable leveling glides.

No power in table top/no grommets.

Worksurface and end panels are 1-3/16" thick.

Source:

Finish Samples:

Two short modesty panels, 10" high.

Collaboration areas

Joints are securely fastened with dowels and mechanical fasteners to ensure maximum strength.

High-pressure laminate (HPL) worksurface with vinyl rim and laminate chassis.

Standard Wood Veneer Finish:

Walnut, Marron M35 - Matte

Edge Detail: Reverse Flow Qty: 1 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: CONFERENCE TABLE 32/40" X 72"

T-07

Source: Photo:

NUCRAFT

POC: Judi Miller 410-404-5374

Model #: FWNB-7240-V-VP

Item Description: Flow Veneer Boat Top with Panel Bases

Jmiller@moii.com

Table top comes in 1 section.

Boat-Shaped Wood Conference table top Width 32"-40", Height 29.5", 1-1/8" Thick with 3/16" deep hardwood edge band.

Small Power Matrix with Single Wood Door (PM-SM-W) 6"W x 5.375"D Data/AV Faceplates: (2) Simplex Outlets, (2) Blank Faceplates, (1) Data Faceplate (contains two RJ-45 data connectors).

(2) Wood Panel Bases - (2) ends with wire management openings.

Finish Samples:

(1) Power Matrix located at center of table (PS-1).

(1) 15-amp 12' plug-in infeed power cord to plug into a floor box.

Reverse Flow Edge Detail.

Wood Finish: Toffee

Qty: 1 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: HALF TRACK MEETING TABLE

T-08

Source: Photo:

JSI

POC: Judi Miller 410-404-5374

Model #: CT6072MACBW

Item Description: Media Activity Center

Jmiller@moii.com

Media cabinet included. One surface grommet, lower hinged access panel, coordinating wood grain laminate.

Dimensions: Depth 72", Width 60", Height 29" Bullet shaped table top with one surface grommet, 1-3/16" thick.

Metal Leg Finish:

Stardust Silver

Table base has a 4" diameter column with 24" diameter disc bottom.

Finish Samples:

Media cabinet Dimensions: Depth 20", Width 60", Height 25"

Wood veneer table top, walnut wood species.

Rubber cushion nylon glides.

Collaboration Room

Corian Top: Rain Cloud

Qty: 1 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: SIDE TABLE

T-09

Source: Photo:

ARCADIA

POC: Judi Miller 410-404-5374

Model #: 3405-1820-CO

Item Description: Reprise Occasional Table

Jmiller@moii.com

Dimensions: Diameter 18", Height 20" Table manufactured in beech wood.

Corian top: Rain Cloud Wood frame and legs.

Finish Samples:

Mother's Room

Wood Leg Finish:

Cocoa Maple 115

Qty: 4 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: MULTI-PURPOSE TABLE 36" X 72"

T-10

Source: Photo:

GLOBAL FURNITURE

POC: Judi Miller 410-404-5374

Model #: Top GRT6TP/ Base GSB19

Item Description: Swap Table, Rectangular Top and Square Bases

Jmiller@moii.com

Factory installed threaded steel inserts ensure metal-to-metal connection with base.

Base constructed of 1/2" thick steel plate counter-balance, covered with finished steel shroud.

Top Dimensions: Width 72", Depth 36", Thickness 1" Table top constructed of thermally fused high performance laminate.

Matching 2mm thick PVC edge.

Finish Samples:

Adjustable leveling glides on all bases.

Pantries

3" diameter cold rolled steel tube fastened to base and table top with bolts. Wood Laminate Top Finish:

Walnut Heights (WHE)

Metal Base Finish:

Brushed Chrome

Laminate Top: Knoll Laminate, Walnut 127

Qty: 24 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: 3-HIGH LATERAL FILE

S-01

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: C2F3936CCCC

Item Description: Calibre Front Lateral Files

Jmiller@moii.com

Three 12" drawers with hanging rails. Rails provided for filing side-to-side and front to back and are adjustable for letter, A4, foolscap, JIS, legal or EDP paper sizes.

Rectangular laminate file tops for Calibre Front Files (provide shared tops for clusters of three-drawer lateral files as indicated on drawings.

Dimensions: Width 36", Height 39", Depth 18"

Per drawer weight capacity 150 pounds.

Finish Samples:

Painted metal lateral file smooth finish.

Wood laminate file tops.

Open Office areas

Paint Finish: Knoll Paint, Silver 613

Qty: 11 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: 5-HIGH LATERAL FILE

S-02

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: C2F5530CDDDDD

Item Description: Calibre Front Lateral Files

Jmiller@moii.com

Dimensions: Width 30", Height 55.5", Depth 18"

Painted metal lateral file smooth finish.

Five 10.5" drawers with hanging rails. Rails provided for filing side-to-side and front to back and are adjustable for letter, A4, foolscap, JIS, legal or EDP paper sizes.

Finish Samples:

Open Office areas

Paint Finish: Knoll Paint, Silver 613 Smooth

Laminate Top: Knoll Laminate, Walnut 127

Qty: 12 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: STORAGE CABINET

S-03

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #: C2C3930C

Item Description: Calibre Front Cabinet and Doors

Jmiller@moii.com

Rectangular laminate file tops for Calibre Front Files (provide shared tops for clusters of three-drawer lateral files as indicated on drawings.

Dimensions: Width 30", Height 39", Depth 18" Two adjustable shelves; adjustable in 2-1/2" increments.

Cabinet shelves are black.

Painted metal cabinet and doors, smooth finish.

Finish Samples:

Wood laminate file tops.

Print/Copy areas

Paint Finish: Knoll Paint, Silver 613 Smooth

Qty: 4 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: 5-SHELF BOOKCASE

S-04

Source: Photo:

KNOLL

POC: Judi Miller 410-404-5374

Model #:

Item Description: Calibre Bookcase

Jmiller@moii.com

Top trim panel included to provide a smooth appearance to the underside of the top.

Dimensions: Width 36", Height 70.75", Depth 14-7/8" Five High Bookcase, steel top, four steel shelves.

Painted metal, smooth finish.

Finish Samples:

Steel top and steel base.

Open Office areas

Paint Finish: Knoll Paint, Silver 613 Smooth

Shelves are adjustable on 1.05" increments the entire length of the case and include an approximately 3/4" gap in the back of the shelf for future enhancements.

Standard Wood Veneer Finish:

Walnut, Marron M35 - Matte

Qty: 3 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: 4-DOOR CREDENZA

S-05

Source: Photo:

NUCRAFT

POC: Judi Miller 410-404-5374

Model #: PC-U-7229-V-PLI, R2-A

Item Description: Performance Utility Credenza

Jmiller@moii.com

Dimensions: Width 72", Depth 24-3/4", Height 30-1/4" Three Door Wood Credenza, Veneer Top with Hardwood Square Edge Three Doors with internal width of 22-3/4" each.

Thermostatically controlled fan activates automatically at 87 degrees F and turns off at 85 degrees F to control ventilation.

9.812" Ingot Pull

Finish Samples:

Two Door components to have standard, one adjustable shelf behind each door and metal Ingot pull.

Third Door component to have Fixed Equipment Rack- 12RU with thermostatically controlled fan and plugstrip (R2-A).

Wood plinth base.

Location:

Back panel has round 3.5" diameter ventilation cutouts for each of the three positions behind the three doors and a cut-back in bottom of panel, creating a convection current needed for passive ventilation.

Cables can be routed into credenza through the round cutouts or through the cut-back bottom of the back panel and between modules.

Conference Rooms

Powdercoat Finish: Gray

Qty: 3 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: OPEN METAL SHELVING

S-06

Source: Photo:

GLOBAL INDUSTRIAL

POC: Judi Miller 410-404-5374

Model #: 798476

Item Description: Heavy Duty Die Rack Shelving

Jmiller@moii.com

Storage for extra heavy loads with maximum capacity per shelf of 3000 pounds.

Formed angle 2" x 2" uprights are constructed of 13 gauge steel punched on 1" centers for quick and easy shelf adjustment.

Dimensions: Width 36", Depth 18", Height 72" Clear access on all four sides.

All shelves feature a 14 gauge 2" deep channel formed on all four sides.

Finish Samples:

Tough powdercoat finish.

Storage Room

Steel Deck construction.

Each shelf has an additional channel formed stiffener welded to the underside of the shelf to prevent flexing under heavy load.

Finish: Stainless Steel as shown in image.

Fresh food door features: Dairy compartment; drop down tray.

Qty: 5 Unit Cost: $0.00 Price Total: $0.00 Location:

Pantries

Freezer features: Interior lighting - LED (2) *Do not connect/install Icemaker and Water Filtration System.

Finish Samples:

Fresh food door bins: (4) adjustable with gallon storage; (6) total.

Freezer door bins: (1) Total Freezer storage baskets: (2) full-width

Fresh food cabinet shelves: (1) quick space shelf; (3) spill proof; (4) split adjustable; (1) full width; (5) Total - glass with silver trim.

Fresh food cabinet drawers: (1) full-width; adjustable temperature drawer; (2) adjustable humidity; (3) total; Electronic temperature control w/LED lighting.

Source: Photo:

GE

POC: Judi Miller 410-404-5374 Jmiller@moii.com

Model #: PWE23KSKSS

Item Description: Profile Series ENERGY STAR 23.1 Cu. Ft. Counter- Depth French-Door Refrigerator Dimensions: 69-7/8"H X 31-1/4"D X 35-3/4"W Total Capacity: 23.10 cubic feet (Fresh Food 15.90/Freezer 7.20) TwinChill Evaporators temperature management system.

Internal electronic digital temperature display controls w/LED lights.

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: REFRIGERATOR

REQ-01

Finish: Stainless Steel, Chrome handle as shown.

Qty: 4 Unit Cost: $0.00 Price Total: $0.00

Chrome full-length pro handle.

No-frost operation for minimum user maintenance.

Capacity 4.8 cubic feet.

Digital thermostat; Electronic controls located inside the unit for precise temperature management.

Location:

Mother's Room, Small Coffee Bars

Finish Samples:

Recessed LED interior light.

Three adjustable glass shelves, Two full door shelves.

Temperature range: 36 to 43 degrees.

Four level legs.

Source: Photo:

SUMMIT

POC: Judi Miller 410-404-5374 Jmiller@moii.com

Model #: AL54

Item Description: Summit 24" Undercounter Refrigerator Dimensions: 32"H X 23.63"W X 23.63"D Built-in undercounter ADA compliant all-refrigerator with stainless steel door, black cabinet, door storage, lock, and digital controls.

Flexible design allows for built-in or freestanding use in 24" wide spaces.

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: UNDERCOUNTER REFRIGERATOR

REQ-02

Finish: Stainless Steel

Qty: 7 Unit Cost: $0.00 Price Total: $0.00

Pantries Location:

Finish Samples:

Control lockout - Prevents accidental activation by locking the oven.

Auto & time defrost/Turntable/Electronic touch controls Instant on controls - Cooking and reheating happens instantly at the touch of a button.

Add 30 seconds - Each touch allows you to add 30 seconds of microwave cooking time at any point in the cooking process without reprogramming.

Kitchen Timer - Oven timer can be set to countdown a specific amount of minutes to help watch the time for you.

Source: Photo:

GE

POC: Judi Miller 410-404-5374 Jmiller@moii.com

Model #: JES2051SNSS

Item Description: Simple Human Round Open Top Trash Receptacle Dimensions: 23-7/8"W X 13-5/8"H X 19-1/4"D Total Capacity 2.0 cubic feet, 1200 watts.

Sensor cooking controls - Automatically adjusts time and power for delicious cooking results.

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: MICROWAVE

REQ-03

Finish: Brushed Stainless Steel

Qty: 3 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: ROUND TRASH CAN

REQ-06

Source: Photo:

GLOBAL INDUSTRIAL

POC: Judi Miller 410-404-5374

Model #: 641242SS

Item Description: Simple Human Round Open Top Trash Receptacle

Jmiller@moii.com

Dimensions: Width 18", Depth 18", Height 32" 30 Gallon capacity Bullet Open Top

Finish Samples:

Pantries

Qty: 36 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: WHITE BOARD 36" X 60"

REQ-10

Source: Photo:

EGAN

POC: Judi Miller 410-404-5374

Model #: MFTE6048

Item Description: Markerboard with Integrated Aluminum Marker Tray

Jmiller@moii.com

Dimensions: Width 60", Height 48" Clear anodized aluminum frame; square corner.

EVS dry erase surface; magnet compatible.

Full length aluminum marker tray.

Include Dry-Erase markers and EganCloth.

Finish Samples:

Private Offices

Qty: 8 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: WHITE BOARD 48" X 72"

REQ-10A

Source: Photo:

EGAN

POC: Judi Miller 410-404-5374

Model #: MFTE7248

Item Description: Markerboard with Integrated Aluminum Marker Tray

Jmiller@moii.com

Dimensions: Width 72", Height 48" Clear anodized aluminum frame; square corner.

EVS dry erase surface; magnet compatible.

Full length aluminum marker tray.

Include Dry-Erase markers and EganCloth.

Finish Samples:

Conference Rooms

Finish: Black plastic as shown in image.

Qty: 182 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: PERSONAL WASTE RECEPTACLE

REQ-11

Source: Photo:

GLOBAL INDUSTRIAL

POC: Judi Miller 410-404-5374

Model #: 603362BK

Item Description: Personal Waste Basket

Jmiller@moii.com

Dimensions: Width 14-3/8", Depth 10-1/4", Height 15" 7 Gallon Capacity

Finish Samples:

All Private Offices, All Workstations, Meeting/Conference Rooms

Qty: 1 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: FULL LENGTH MIRROR

REQ-19

Source: Photo:

BOBRICK

POC: Judi Miller 410-404-5374 Jmiller@moii.com

Model #: B-165 2460: 24 W x 60 H

Item Description: Channel Frame Mirror Dimensions: 24 W x 60 H One-piece, 1/2 x 1/2 x 3/8 (13 x 13 x 9.5mm) channel-frame.

Type 430 stainless steel with bright-polished finish.

Mitered corners. Frame screw permits easy replacement of glass.

No. 1 quality, 1/4 (6mm) glass mirror; warranted against silver spoilage for 15 years.

Galvanized steel back. Finish Samples:

Secured to concealed wall hanger with theft-resistant mounting.

Mother's Room

Fabric: Maharam- Messenger/Lonspur

Qty: 5 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: TACKBOARD 48" X 48"

REQ-22

Source: Photo:

EGAN

POC: Judi Miller 410-404-5374

Model #: DTB484819FCA

Item Description: Dimension Tack Boxcore

Jmiller@moii.com

Dimensions: Width 48", Height 48" Clear anodized aluminum 3/4" boxcore frame with ultra-thin bezel.

3/8" Deep tackable panel mounted proud on the board.

Graded-in Maharam tackable fabric.

Finish Samples:

Qty: 3 Unit Cost: $0.00 Price Total: $0.00

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: ANALOG WALL CLOCK

REQ-23

Source: Photo:

PETER PEPPER

POC: Judi Miller 410-404-5374

Model #:

Item Description: Analog Wall Clock, Model 820

Jmiller@moii.com

13-7/8" Clock with Flush Acrylic Cover Bezel Color: Aluminum Metallic Clock Face Design: Face No. 37

Finish Samples:

Finish: Silver metal trim.

Mounting Type:

Qty: 175 Unit Cost: $0.00 Price Total: $0.00 Location:

Workstations WS-01, WS-01A, WS-02, WS-03

Finish Samples:

Photo:

2/90 SIGN SYSTEMS

POC: Judi Miller 410-404-5374 Jmiller@moii.com

Model #: 290+1

Item Description: PlusOne Workstation Nameplate Dimensions: 2"H X 8.5"W Silver nameplate with blank white paper insert.

Mounting type:

Source:

Client downloads template to print names on supplied perforated paper.

Job Name: Job Order Number: WORK ORDER #90246-020 FURNITURE, FIXTURES & EQUIPMENT (FF&E) SUMMARY Date: 8/2/2019 PROJECT: BLDG 3072 Renovation Item Name: WORKSTATION SIGNAGE

REQ-24

APPENDICES

Appendices

APPENDIX 1 – Furniture Review Meetings

APPENDIX 2 – Furniture Footprints Plans

This page is left blank intentionally

APPENDIX 1 FURNITURE REVIEW MEETINGS

This page is left blank intentionally.

MEMORANDUM of MEETING

N:\90246-020\Corresp\Meetings\14 Furniture Meeting #1 - 2019-07-02\14 APG Bldg 3072 - FF&E Meeting #1 - Minutes.docx

Date: August 1, 2019

Date of Meeting: July 2, 2019 Work Order Number: 90246-020 Time of Meeting: 1:30 pm Contract Number: W912DR-16-D-0005 Meeting Location: APG Bldg. 3072, Conference Room 105E Project: APG Building 3072 Renovation Meeting Description: Furniture Meeting #1

CC: File

Participants:

Name Company Phone Email Laverne Ogieste DEVCOM 410-306-3195 Laverne.r.ogieste.civ@mail.mil

Melanie Reese DEVCOM 410-278-0045 Melanie.a.reese4.civ@mail.mil

Lindsay Rash DEVCOM 443-395-3918 Lindsay.m.rash.ctr@mail.mil

Corice Singletary WRA – Interior Design 410-854-1042 csingletary@wrallp.com

Ana Aquino WRA – Interior Design 443-224-1688 aaquino@wrallp.com

The purpose of this meeting was to review the presentation of concept furniture imagery to develop the basis of design furniture for the Bldg. 3072 Renovation FF&E package. Furniture imagery was presented in a PowerPoint format covering furniture needs for every occupied space in the building. Furniture product brochures showing optional features/accessories were used as needed to assist the end users in defining their furniture needs.

1. Review of Conceptual Furniture PowerPoint and Brochures – Provided feedback (likes/dislikes of features for each piece of furniture presented) that WRA will use to generate basis of design specifications for each item.

2. Define all desired componentry of workstations, admin workstations, private offices, A/V operator’s desk, and SIPR kiosks.

2.1. Private Office Requirements –

2.1.1. A wardrobe storage component is required, placed in front of main desk. Storage unit should be a combination full height wardrobe on one side, combination bookcase above and lateral file storage below on other side.

2.1.2. Wood door fronts; no frosted glass doors.

2.1.3. Main desk surface to be a rounded “D-top” with partial modesty and sit-to-stand. Modesty panel for main desk surface with an overhang for guest seating.

2.1.4. Box/File storage pedestal below desk.

2.1.5. Tack board with accent panel fabric below overhead storage above return worksurface.

2.1.6. Back, credenza worksurface to have box/file storage below worksurface.

2.1.7. No hierarchy in private office furniture. All private office desking components to be the same, with the addition of a small side table and additional guest chairs for Director Private Offices.

2.1.8. CCDEVCOM wanted to see both knife edge and softened square edge profiles for desking components.

2.1.9. (2) Grommets in credenza and main desk worksurfaces, (1) centered grommet in return worksurface.

02 July 2019 Page 2 Work Order: 90246-020

N:\90246-020\Corresp\Meetings\14 Furniture Meeting #1 - 2019-07-02\14 APG Bldg 3072 - FF&E Meeting #1 - Minutes.docx

2.1.10. Master keys for storage.

2.2. Typical Workstation Requirements –

2.2.1. Workstations will all be the same 6 X 8 typical with the following exceptions: 6 X 10 workstations in secure work area located in the basement, and any variation on the 6 X 8 typical that is necessary due to building constraints such as existing columns, ADA aisle clearances, etc.

2.2.2. There was an expressed interest in each workstation having a whiteboard tile within the footprint of the workstation.

2.2.3. Ergonomic accessories were discussed and deemed not needed in this package. No keyboard trays or slat wall desired.

2.2.4. Wing panels will enclose workstations along aisles, so individual users have more privacy.

2.2.5. No need for an overhead bookshelf. CCDEVCOM prefers (2) overhead storage units with sliding doors, lockable if possible.

2.2.6. Fixed box/box/file storage pedestal below one of the worksurfaces.

2.2.7. No need for a pelican drawer in workstation typical.

2.2.8. (2) grommets will be provided in each worksurface with horizontal wire management (J-hook of some sort) mounted to the underside of each worksurface.

2.2.9. Admin workstation will have a lower panel on the 6’-0” side for the addition of a transaction counter.

2.2.10. CCDEVCOM requested master keys for all lockable storage components.

2.2.11. Sit-to-stand table required for one of the worksurfaces.

2.2.12. WRA to show CCDEVCOM two 3D workstation options: added glass topper above furniture panels with a height adjustable table, and no glass topper above furniture panel with every worksurface stationary.

2.2.13. Workstation panel heights to be 48” high, depending on chosen manufacturer’s standard panel height closest to 48”.