B.08.03 - Solicitation QA 2.pdf

PDF 285 KB Posted

Attached to
Rathbun Lake Roof Overlays
Solicitation number
W912DQ20R1072
Issued by

View the file

Other files

File Type Posted
B.08.03 - Solicitation Amendment 1.pdf PDF
B.08.03 - Solicitation QA 1.pdf PDF
B.07.01 - Site Visit Sign In Sheet.pdf PDF
B.08.02 - Attachment Past Performance Questionairre.pdf PDF
A.03.09 - Drawings & Maps 081320.pdf PDF
B.08.02 - Solicitation W912DQ20R1072.pdf PDF
B.08.02 - Attachment Experience Form.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Solicitation Questions and Answers 2

1. When referring to the solicitation, if you reference Page 17 of 66, Item 2.10, it references insulation.

It states “Provide insulation, facer material and attachment compatible with metal roof system specified, as approved by the roof panel manufacturer, and conform to ASTM C552 (cellular glass) or ASTM C553 (fiber Blankets). Can you please clarify where the new insulation is to be installed within the new metal roof overlay system?

No insulation is required. Refer to changes made per Solicitation Amendment 1.

2. When referring to the solicitation, if you reference page 17 of 66, Item 2.11, it references underlayment – EPDM Membrane. Can you please clarify where the EPDM membrane is to be utilized as underlayment within the new metal roof overlay system?

The only areas to receive new underlayment are the areas to receive new sheathing (i.e. typical framed end alteration and skylight infill areas).

3. When referring to the solicitation, if you reference page 21 of 66, Item 3.7.2, it refers to the installation of underlayment. Furthermore, Item 3.7.2.1 refers to single layer felt underlayment and Item 37.2.2 refers to self-adhering sheet underlayment and the installation procedure for each type.

Can you please clarify if the only areas to receive new underlayment are the areas to receive new sheathing (i.e. typical framed end alteration and skylight infill areas) and that these areas are to receive underlayment that is acceptable to the metal roof panel system manufacturer?

See answer to Question 2.

4. When referring to the typical framed end alteration, can you please clarify if these new framed ends are to receive any type of soffit material or finish? After performing a site visit it appears that the existing soffit material is sheathing that is painted. Furthermore, if sheathing is required for the soffit, we will also be required to paint the soffit?

The installation of soffit sheathing is a part of the roof extension. No painting is required.

File details come from the government source that posted it. Updated .