Amendment 0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04 EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

KANSAS CITY LEVEE ARMOURDALE/CID PUMP STATION REPAIRS -

--See Continuation Page--

1. CONTRACT ID CODE PAGE OF PAGES

J 1 60

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA 15C. DATE SIGNED 15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer) (Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912DQ20B1004

X 9B. DATED (SEE ITEM 11)

17-Jul-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

U0003

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

28-Aug-2020

CODE

USACE, KANSAS CITY +

FEDERAL BLDG. CT-M RM 647; 601 E 12TH ST

KANSAS CITY MO 64106-2896

W912DQ 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODE CODE

EMAIL: TEL:

W912DQ20B1004

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE (SF 30)

The following have been added by full text:

AMENDMENT 0003

The SOLICITATION is amended as follows:

Deleted text is shown with a strikethrough. Added text is shown with underline.

1. This amendment is to update the CLIN schedule – Please use this for your submission

2. This amendment is to update the ARMOURDALE UNIT SPECIFICATIONS

3. This amendment is to update the CID UNIT SPECIFICATIONS

4. This amendment is to to add an APPENDIX

5. This amendment is to update ARMOURDALE UNIT DRAWINGS

6. This amendment is to update CID UNIT DRAWINGS

7. This amendment is to update SITE INFORMATION

8. This amendment is to update the Wage Determination KS20200032 05/29/2020 TO READ KS20200032

08/14/2020

9. This amendment is to update the Wage Determination MO20200001 06/05/2020 TO READ MO20200001

08/14/2020

10. Proposal Due Date will be extended to September 10, 2020 at 2:00 pm local time.

11. Offeror is required to acknowledge receipt of this amendment. Failure to acknowledge this amendment may cause rejections of the proposal.

**Plan room will include entire amendment 0003 with attachments**

All other terms and conditions remain unchanged and in full force.

1. DIVISION 00 – CONTRACTING AND PROCUREMENT REQUIREMENTS

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job Armourdale Mobilization and Demobilization

FFP

Includes all labor, materials, and equipment to accomplish the work associated with mobilization and demobilization as outlined in specification section 01 22

00.00 10.

FOB: Destination

PSC CD: Y1KZ

NET AMT

0002 1 Job Armourdale Osage Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the Osage Pump Station as outlined in specification section 01 22 00.00 10.

0003 1 Job Armourdale 12th Street Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the 12th Street Pump Station as outlined in specification section 01 22 00.00 10.

0004 1 Job Armourdale Mill Street Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the Mill Street Pump Station as outlined in specification section 01 22 00.00 10.

0005 1 Job Armourdale 5th Street Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the 5th Street Pump Station as outlined in specification section 01 22 00.00 10.

0006 1 Job Armourdale Shawnee Avenue Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the Shawnee Avenue Pump Station as outlined in specification section 01 22 00.00 10.

0007 1 Job Armourdale KC Southern Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the KC Southern Pump Station as outlined in specification section 01 22 00.00 10.

0008 1 Job Armourdale National Beef Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the National Beef Pump Station as outlined in specification section 01 22 00.00 10.

0009 1 Job Armourdale Temp Bypass Pumping System

FFP

Includes all work associated with provision of Government pump units and temporary bypass pumping system equipment as outlined in specification section

01 22 00.00 10.

0010 1 Job OPTION Armourdale Osage PS -Betterment

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the upgrades associated with the Osage Pump Station as outlined in specification section 01 22 00.00 10.

0011 1 Job OPTION Armourdale 12th Street PS -Betterments

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the upgrades associated with the 12th Street Pump Station as outlined in specification section 01 22 00.00 10.

0012 1 Job OPTION Armourdale Mill Street PS -Betterments

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the upgrades associated with the Mill Street Pump Station as outlined in specification section 01 22 00.00 10.

0013 1 Job OPTION Armourdale 5th Street PS -Betterments

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the betterments associated with the 5th Street Pump Station as outlined in specification section 01 22 00.00 10.

0014 1 Job OPTION Armourdale Shawnee Ave PS -Betterments

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the betterments associated with the Shawnee Avenue Pump

Station as outlined in specification section 01 22 00.00 10.

0015 1 Each OPTION Armourdale Temp Bypass Pumping System

FFP

Includes all work associated with installation and removal of temporary bypass pumping systems as outlined in specification section 01 22 00.00 10.

0016 200 Hours OPTION Armourdale Temp Bypass Pumping System Op

FFP

Includes all work associated with active operation of temporary bypass pumping systems as outlined in specification section 01 22 00.00 10.

ARMOURDALE - TOTAL BASE PLUS OPTIONAL CLINS: $_____________________

0017 1 Job CID Mobilization and Demobilization

FFP

Includes all labor, materials, and equipment to accomplish the work associated with mobilization and demobilization as outlined in specification section 01 22

00.00 10.

0018 1 Job OPTION CID Broadway Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the Broadway Pump Station as outlined in specification section 01 22 00.00 10. This pump station is located in Missouri the work associated with this pump station will use the Missouri Davis Bacon

Wage rates in this solicitation.

0019 1 Job CID Ohio Avenue Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the Ohio Avenue Pump Station as outlined in specification section 01 22 00.00 10.

0020 1 Job CID Mistletoe Pump Station

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the improvements to the Mistletoe Pump Station as outlined in specification section 01 22 00.00 10.

0021 1 Job OPTION CID Ohio Avenue PS Betterments

FFP

Includes all labor, materials, and equipment to accomplish the work associated with construction of the betterments associated with the Ohio Avenue Pump

Station as outlined in specification section 01 22 00.00 10.

0022 1 Each OPTION CID Temporary Bypass Pumping System

FFP

Includes all work associated with installation and removal of temporary bypass pumping systems as outlined in specification section 01 22 00.00.10.

0023 20 Hours OPTION CID Temporary Bypass Pumping System Op

FFP

Includes reimbursement of costs for active operation of temporary bypass pumping systems as outlined in specification section 01 22 00.00 10.

CID - TOTAL BASE PLUS OPTIONAL CLINS: $_____________________

2. ARMOURDALE UNIT SPECIFICATIONS:

Section 01 14 00 Para 1.3

Add D. The pumps shall be considered inoperable upon the removal of the trash racks. Therefore, Bypass Pumping must be in place and ready for operation prior to trash rack removal.

Section 01 14 00, Paragraph 1.5

Delete C. Existing trashrack must be removed during curb construction.

Renumber remaining lines D, E, F, G.

Section 01 33 00, ENG Form 4025-R

Review classifications for some submittals have been revised. A list of revised submittals, with the updated classifications, is included with the Amendment 003 documents. No submittals have been added or removed to the project specifications. Updated reviewer classifications in the individual specification sections will be provided with As Awarded specifications.

Section 31 68 13, Para 3.1.8

Add Contractor to coordinate placement of demonstration test anchor with contracting officer and geotechnical engineer. Testing location to be located near the pump station, allowing access to both drilling and testing equipment in order to verify Contractor’s design and installation procedure. Contractor to construct a 6’-0” x 6’-0” x 1’-6” concrete pad with #6@8” on-center bottom reinforcing to proof test demonstration anchor. Anchor to be abandoned in-place after successful completion of test. Concrete pad and anchor shall be removed three feet below the ground and backfilled to match existing grade. Contractor shall provide demonstration anchor location on as-built drawings.

Section 35 41 00, Para 2.1

Modify Therefore, the electric motor pump or station lubrication system, and associated equipment should be selected by the pump manufacturer.

Section 35 41 00, Para 2.1.1.D

Modify Each pump discharge system downstream of pump discharge elbow must be designed by the pump manufacturer. shall be as shown in the drawings and of materials listed in specifications. It must be of type shown and fit within limiting dimensions and elevations shown.

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 1 Aluminum Bronze

Add Impeller

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 3 Bronze

Remove Propeller

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 5 Cast Steel

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 15 Seamless and Welded Austenitic Stainless Steel Pipe

Delete Discharge Pipe

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 21 Steel Pipe 6 inch and Larger

Add Discharge Piping

Section 35 45 01, Para 2.3.1 Table -- Column 4 Grade, Class, Row 21 Steel Pipe 6 inch and Larger

Add 304

Section 35 45 01, Para 2.4.6.8

Add Butt-welded joints with rigid AWWA C207 flanges at equipment, valves, or if shown on the

Drawings.

Section 35 45 01, Para 2.4.7

Modify Make the impeller of cast steel or aluminum bronze.

Section 35 45 01, Para 2.6

Add A. A grease lubrication system shall be provided for each pump station where new pumps are required. The lubrication system shall be electric motor-driven, designed to deliver the proper predetermined or metered quantity of lubricant to each bearing, seal, glands, or stuffing box in accordance with pump manufacturer requirements. Grease pressure pump, metering device, controller, timer, and any auxiliary operating accessories may be individual to each pump and mounted on the baseplate, or may be centralized to the individual pump station and be positioned adjacent to the pumps.

B. Lubrication system shall provide fixed volume lubrication to the pump line shaft bearings before initial start and at programmed run hours for the duration of the run cycle.

1. Furnish a 55 kg 120 pound drum of lubricant, at a minimum, and furnish the lubricant type recommended by the pump manufacturer, subject to approval of the Contracting

Officer.

C. Provide the pump unit with a fully automatic control system, capable of proper scheduling by an adjustable synchronous motor-driven timing device, and other required auxiliaries necessary to give a complete and workable system. Provide the controller with a "Hand-Off-Automatic" selector master switch to permit selection between switch button manual and automatic time clock operation, and to deenergize the system. Use the time clock setting recommended by the vertical pump manufacturer. Alarms associated with the lubrications system shall be connected to the station controls as required for connection to future SCADA; refer to Specification Section 40 95

00.

D. The lubricant transfer pump must be self-contained and designed for mounting on the grease drum to protect the contents from the entrance of foreign material. Furnish the necessary hose and quick disconnect coupling for a complete system.

Renumber existing paragraph as E.

Section 40 95 00 Para 3.6.2.2.B.5

Add hhh. Stormwater Pump Lubrication System General Alarm.

Section 40 95 00 Para 3.6.2.4.B.5

Add vv. Stormwater Pump Lubrication System General Alarm.

Section 40 95 00 Para 3.6.2.A.5.1

Add y. Stormwater Pump Lubrication System General Alarm.

Section 40 95 00 Para 3.6.2.8.B.5.1

Add u. Stormwater Pump Lubrication System General Alarm.

Section 40 95 00 Para 3.6.2.10.B.5

Add ff. Stormwater Pump Lubrication System General Alarm.

Section 40 95 00

ATTACHMENT 01 Table

Add Row in LEVEL TRANSMITTERS with the following information:

Device

Description

Service Range/SP

(Elev., Ft.)

Output Power NOTES

Level transmitter

Upstream of wet well inlet slide gate

742.40 to

755.50

4.20 mA Loop (24VDC) Submersible hydrostatic type

ATTACHMENT 02 – FPS 10/Shawnee PS PLC I/O List

Add The following rows:

55 Pump Lubrication System Alarm DI

ATTACHMENT 02 – FPS 11/Fifth Street PLC I/O List

55 Pump Lubrication System Alarm DI

ATTACHMENT 02 – FPS 12/Mill Street PLC I/O List

Delete The following rows:

17 Pump Station Slide Gate open status DI

18 Pump Station Slide Gate closed status DI

19 Pump Station Slide Gate in REMOTE DI

Renumber rows 20-24

Add The following rows:

22 Generator RUN status DI

23 Generator FAULT DI

24 ATS-NORMAL position DI

25 ATS-EMERGENCY position DI

26 Pump Lubrication System Alarm DI

Delete The following rows:

3 Pump Station Slide Gate open command DO

4 Pump Station Slide Gate close command DO

Renumber rows 5-11

ATTACHMENT 02 – FPS 13/12th Street PLC I/O List

Delete The following rows:

17 Pump Station Slide Gate open status DI

18 Pump Station Slide Gate closed status DI

19 Pump Station Slide Gate in REMOTE DI

Renumber rows 20-24

Add The following rows:

22 Pump Lubrication System Alarm DI

Delete The following rows:

3 Pump Station Slide Gate open command DO

4 Pump Station Slide Gate close command DO

Renumber rows 5-11

ATTACHMENT 02 – FPS 14/Osage PLC I/O List

31 Pump Lubrication System Alarm DI

3. CID UNIT SPECIFICATIONS:

Section 01 14 00 Para 1.3

Add D. The pumps shall be considered inoperable upon the removal of the trash racks. Therefore, Bypass Pumping must be in place and ready for operation prior to trash rack removal.

Section 01 33 00, ENG Form 4025-R

Review classifications for some submittals have been revised. A list of revised submittals, with the updated classifications, is included with the Amendment 003 documents. No submittals have been added or removed to the project specifications. Updated reviewer classifications in the individual specification sections will be provided with As Awarded specifications.

Section 35 41 00, Para 2.1

Modify Therefore, the electric motor pump or station lubrication system, and associated equipment should be selected by the pump manufacturer.

Section 35 41 00, Para 2.1.1.D

Modify Each pump discharge system downstream of pump discharge elbow must be designed by the pump manufacturer. shall be as shown in the drawings and of materials listed in specifications. It must be of type shown and fit within limiting dimensions and elevations shown.

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 1 Aluminum Bronze

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 3 Bronze

Remove Propeller

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 5 Cast Steel

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 15 Seamless and Welded Austenitic Stainless Steel Pipe

Delete Discharge Pipe

Section 35 45 01, Para 2.3.1 Table -- Column 2 Use, Row 21 Steel Pipe 6 inch and Larger

Add Discharge Piping

Section 35 45 01, Para 2.3.1 Table -- Column 4 Grade, Class, Row 21 Steel Pipe 6 inch and Larger

Add 304

Section 35 45 01, Para 2.4.6.8

Add Butt-welded joints with rigid AWWA C207 flanges at equipment, valves, or if shown on the

Drawings.

Section 35 45 01, Para 2.4.7

Modify Make the impeller of cast steel or aluminum bronze.

Section 35 45 01, Para 2.5

Add A. A grease lubrication system shall be provided for each pump station where new pumps are required. The lubrication system shall be electric motor-driven, designed to deliver the proper predetermined or metered quantity of lubricant to each bearing, seal, glands, or stuffing box in accordance with pump manufacturer requirements. Grease pressure pump, metering device, controller, timer, and any auxiliary operating accessories may be individual to each pump and mounted on the baseplate, or may be centralized to the individual pump station and be positioned adjacent to the pumps.

B. Lubrication system shall provide fixed volume lubrication to the pump line shaft bearings before initial start and at programmed run hours for the duration of the run cycle.

1. Furnish a 55 kg 120 pound drum of lubricant, at a minimum, and furnish the lubricant type recommended by the pump manufacturer, subject to approval of the Contracting

Officer.

C. Provide the pump unit with a fully automatic control system, capable of proper scheduling by an adjustable synchronous motor-driven timing device, and other required auxiliaries necessary to give a complete and workable system. Provide the controller with a "Hand-Off-Automatic" selector master switch to permit selection between switch button manual and automatic time clock operation, and to deenergize the system. Use the time clock setting recommended by the vertical pump manufacturer. Alarms associated with the lubrications system shall be connected to the station controls as required for connection to future SCADA; refer to Specification Section 40 95

00.

D. The lubricant transfer pump must be self-contained and designed for mounting on the grease drum to protect the contents from the entrance of foreign material. Furnish the necessary hose and quick disconnect coupling for a complete system.

Renumber existing paragraph as E.

Section 40 95 00 Para 3.6.2.2.5

Add r. Stormwater Pump Lubrication System General Alarm.

ATTACHMENT 02 – FPS 01/Ohio PS PLC I/O List

17 Pump Lubrication System Alarm DI

4. APPENDICES

Add Appendix A Geotechnical Report

5. ARMOURDALE UNIT DRAWINGS

Revised drawings have revisions shown as clouded areas marked as Amendment 3.

Revised drawing sheets include:

C-501

E-601

FC101

FE101

FE151

FE601

FE651

FS101

FS501

FX301

ME101

ME151

ME601

ME651

MX104

OD101

OD151

OE101

OE101

OE151

OE601

OE651

OX103

OX152

SC101

SG101

SE101

SE151

SE601

SE651

TE101

TE151

TE601

TE651

TX104

6. CID UNIT DRAWINGS

Revised drawings have revisions shown as clouded areas marked as Amendment 3.

Revised drawing sheets include:

E-601

OE101

OE151

OE601

OE651

OE651

OX103

7. SITE INFORMATION

The following additional site information in included with the Amendment 003 documents.

12th Street Pump Station – Roof Hatch Photos (3)

Mill Street Pump Station – Roof Hatch Photos (3)

Ohio Avenue Pump Station – Roof Hatch Photos (3)

8. WAGE RATES

"General Decision Number: KS20200032 08/14/2020

Superseded General Decision Number: KS20190032

State: Kansas

Construction Type: Heavy

County: Wyandotte County in Kansas.

HEAVY CONSTRUCTION PROJECTS (including sewer/water construction).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January

1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year

2020. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the

Davis-Bacon Related Acts, including those set forth at 29 CFR

5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/03/2020

1 01/24/2020

2 02/07/2020

3 03/13/2020

4 05/08/2020

5 05/15/2020

6 05/29/2020

7 07/24/2020

8 08/14/2020

CARP0315-001 05/01/2019

Rates Fringes

CARPENTER........................$ 39.58 17.77

ELEC0124-009 08/26/2019

ELECTRICIAN......................$ 40.79 22.92

ENGI0101-038 04/01/2020

POWER EQUIPMENT OPERATOR

Backhoe/Excavator/Trackhoe..$ 37.02 19.89

IRON0010-016 04/01/2020

IRONWORKER (REINFORCING AND

STRUCTURAL)......................$ 34.00 31.24

LABO1290-004 04/01/2020

LABORER

Asphalt, Includes Raker, Shoveler, Spreader and

Distributor.................$ 31.28 16.33

Form Work Only..............$ 32.49 16.33

LABO1290-009 04/01/2017

LABORER (Common or General)......$ 29.58 15.23

PAIN2012-006 05/01/2012

PAINTER (Spray Only).............$ 22.93 11.51

PLAS0518-008 04/01/2020

CEMENT MASON/CONCRETE FINISHER...$ 32.72 18.30

PLUM0008-019 06/01/2020

PLUMBER..........................$ 48.03 22.84

* TEAM0541-003 04/01/2020

TRUCK DRIVER

(1) Dump Truck and Lowboy

Truck.......................$ 32.79 16.25

SUKS2014-017 07/09/2014

OPERATOR: Crane.................$ 37.05 13.71

OPERATOR: Loader................$ 32.33 13.88

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the

Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses

(29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate

(weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or

""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the

Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the

Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator

(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator

U.S. Department of Labor

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative

Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION"

"General Decision Number: MO20200001 08/14/2020

Superseded General Decision Number: MO20190001

State: Missouri

Construction Types: Heavy and Highway

Counties: Missouri Statewide.

HEAVY AND HIGHWAY CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January

1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year

2020. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the

Davis-Bacon Related Acts, including those set forth at 29 CFR

5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/03/2020

1 01/24/2020

2 02/07/2020

3 02/14/2020

4 03/13/2020

5 04/03/2020

6 04/24/2020

7 05/08/2020

8 05/15/2020

9 05/29/2020

10 06/05/2020

11 07/03/2020

12 07/24/2020

13 08/07/2020

14 08/14/2020

CARP0002-002 05/01/2019

ST. LOUIS COUNTY AND CITY

Carpenters.......................$ 38.02 17.77

CARP0005-006 05/03/2015

CASS (Richards-Gebauer AFB ONLY), CLAY, JACKSON, PLATTE AND RAY

COUNTIES

Carpenters:

CARPENTERS & LATHERS........$ 36.34 15.55

MILLWRIGHTS & PILEDRIVERS...$ 36.34 15.55

CARP0011-001 05/01/2019

Carpenter and Piledriver

ADAIR, AUDRAIN (West of

Hwy 19), BOONE, CALLAWAY, CHARITON, COLE, COOPER, HOWARD, KNOX,LINN, MACON, MILLER, MONITEAU,MONROE, OSAGE, PUTNAM, RANDOLPH, SCHUYLER, SHELBY AND

SULLIVAN COUNTIES...........$ 32.28 17.77

ATCHISON, ANDREW, BATES,

CALDWELL, CARROLL,DAVIESS,

DEKALB,GENTRY, GRUNDY,

HARRISON, HENRY, HOLT,

LIVINGSTON, MERCER,

NODAWAY,ST. CLAIR, SALINE

AND WORTH COUNTIES..........$ 30.76 17.77

AUDRAIN (East of Hwy.19), RALLS, MARION, LEWIS, CLARK AND SCOTLAND COUNTIES.$ 32.29 17.77

BARRY, BARTON, CAMDEN,

CEDAR, CHRISTIAN, DADE,

DALLAS, DOUGLAS, GREENE,

HICKORY,JASPER, LACLEDE,

LAWRENCE, MCDONALD,

NEWTON, OZARK, POLK,

STONE, TANEY, VERNON,

WEBSTER AND WRIGHT COUNTIES.$ 30.36 17.77

BENTON, MORGAN AND PETTIS...$ 30.81 17.77

BOLLINGER, BUTLER, CAPE

GIRARDEAU, DUNKLIN,

MISSISSIPPI, NEW MADRID,

PEMISCOT, PERRY, STE.

GENEVIEVE, SCOTT, STODDARD

AND WAYNE COUNTIES..........$ 32.14 17.77

BUCHANAN, CLINTON, JOHNSON

AND LAFAYETTE COUNTIES......$ 31.49 17.77

CARTER, HOWELL, OREGON AND

RIPLEY COUNTIES.............$ 31.09 17.77

CRAWFORD, DENT, GASCONADE,

IRON, MADISON, MARIES,

MONTGOMERY, PHELPS,

PULASKI, REYNOLDS, SHANNON

AND TEXAS COUNTIES..........$ 32.13 17.77

FRANKLIN COUNTY.............$ 35.56 17.77

JEFFERSON AND ST. CHARLES

COUNTIES....................$ 38.02 17.77

LINCOLN COUNTY..............$ 34.00 17.77

PIKE, ST. FRANCOIS AND

WASHINGTON COUNTIES.........$ 32.92 17.77

WARREN COUNTY...............$ 34.44 17.77

ELEC0001-002 05/31/2020

BOLLINGER, BUTLER, CAPE GIRARDEAU, CARTER, DUNKLIN, FRANKLIN,

IRON, JEFFERSON, LINCOLN, MADISON, MISSISSIPPI, NEW MADRID,

PEMISCOT, PERRY,REYNOLDS, RIPLEY, ST. CHARLES, ST. FRANCOIS,

ST. LOUIS (City and County), STE. GENEVIEVE, SCOTT, STODDARD, WARREN, WASHINGTON AND WAYNE COUNTIES

Electricians.....................$ 40.61 27.06

ELEC0002-001 09/01/2018

ADAIR, AUDRAIN, BOONE, CALLAWAY, CAMDEN, CARTER, CHARITON,

CLARK, COLE, COOPER, CRAWFORD, DENT, FRANKLIN, GASCONADE,

HOWARD, HOWELL, IRON, JEFFERSON, KNOX, LEWIS, LINCON, LINN,

MACON, MARIES, MARION, MILLER, MONITEAU, MONROE, MONTGOMERY,

MORGAN, OREGON, OSAGE, PERRY, PHELPS, PIKE, PULASKI, PUTNAM,

RALLS, RANDOLPH, REYNOLDS, RIPLEY, ST. CHARLES, ST. FRANCOIS,

ST. LOUIS (City and County), STE. GENEVIEVE, SCHUYLER, SCOTLAND, SHANNON, SHELBY, SULLIVAN, TEXAS, WARREN AND

WASHINGTON COUNTIES

Line Construction:

Equipment Operator..........$ 39.50 19.96

Groundman & Truck Driver....$ 30.36 16.67

Lineman & Cable Splicer.....$ 45.90 22.27

ELEC0053-004 01/01/2020

Line Construction: (ANDREW, ATCHINSON, BARRY, BARTON, BUCHANAN, CALDWELL, CEDAR, CHRISTIAN, CLINTON, DADE, DALLAS, DAVIES,, DEKALB, DOUGLAS, GENTRY, GREENE, GRUNDY, HARRISON, HICKORY, HOLT, JASPER, LACLEDE, LAWRENCE, LIVINGSTON, MCDONALD, MERCER, NEWTON, NODAWAY, OZARK, POLK, ST.

CLAIR, STONE, TANEY, VERNON,

WEBSTER, WORTH AND WRIGHT

COUNTIES)

Groundman Powderman.........$ 32.27 16.09

Groundman...................$ 30.12 15.38

Lineman Operator............$ 43.40 19.30

Lineman.....................$ 47.30 20.45

Line Construction; (BATES, BENTON, CARROLL, CASS, CLAY, HENRY, JACKSON, JOHNSON, LAFAYETTE, PETTIS, PLATTE, RAY AND SALINE COUNTIES)

Groundman Powderman.........$ 32.27 15.52

Groundman...................$ 30.12 14.88

Lineman Operator............$ 43.40 18.80

Lineman.....................$ 47.30 19.95

ELEC0095-001 06/01/2019

BARRY, BARTON, CEDAR, DADE, JASPER, LAWRENCE, MCDONALD, NEWTON,

ST CLAIR, AND VERNON COUNTIES

Electricians:

Cable Splicers..............$ 25.40 12.19

Electricians................$ 27.43 14.97

ELEC0124-007 08/26/2019

BATES, BENTON, CARROLL, CASS, CLAY, COOPER, HENRY, JACKSON,

JOHNSON, LAFAYETTE, MORGAN, PETTIS, PLATTE, RAY AND SALINE

COUNTIES:

Electricians.....................$ 40.79 22.92

ELEC0257-003 03/01/2020

AUDRAIN (Except Cuivre Township), BOONE, CALLAWAY, CAMDEN, CHARITON, COLE, CRAWFORD, DENT, GASCONADE, HOWARD, MARIES, MILLER, MONITEAU, OSAGE, PHELPS AND RANDOLPH COUNTIES

Cable Splicers..............$ 30.42 16.085

Electricians................$ 34.00 18.68

ELEC0350-002 12/01/2019

ADAIR, AUDRAIN (East of Highway 19), CLARK, KNOX, LEWIS, LINN, MACON, MARION, MONROE, MONTGOMERY, PIKE, PUTNAM, RALLS, SCHUYLER, SCOTLAND, SHELBY AND SULLIVAN COUNTIES

Electricians.....................$ 32.50 17.65

ELEC0453-001 09/01/2019

CHRISITAN, DALLAS,

DOUGLAS, GREENE, HICKORY,

HOWELL, LACLEDE, OREGON,

OZARK, POLK, SHANNON,

WEBSTER and WRIGHT COUNTIES.$ 27.88 14.99

PULASKI and TEXAS COUNTIES..$ 32.53 15.46

STONE and TANEY COUNTIES....$ 23.67 14.17

* ELEC0545-003 06/01/2020

ANDREW, BUCHANAN, CLINTON, DEKALB, ATCHISON, HOLT, MERCER,

GENTRY, HARRISON, DAVIESS, GRUNDY, WORTH, LIVINGSTON, NODAWAY,

AND CALDWELL COUNTIES

Electricians:....................$ 33.00 18.10

ELEC0702-004 12/30/2019

BOLLINGER, BUTLER, CAPE GIRARDEAU, DUNKLIN, MADISON,

MISSISSIPPI, NEW MADRID, PEMISCOT, SCOTT, STODDARD AND WAYNE

Line Construction:

Groundman - Class A.........$ 30.31 29% + 7.75

Groundman-Equipment

Operator Class II (all other equipment)............$ 38.46 29% + 7.75

Heavy-Equipment Operator

Class I (all crawler type equipment D-4 and larger)...$ 43.88 29% + 7.75

Lineman.....................$ 53.51 29% + 7.75

ENGI0101-001 05/01/2020

ANDREW, ATCHISON, BATES, BENTON, BUCHANAN, CALDWELL, CARROLL,

CHARITON, CLINTON, COOPER, DAVIESS, DEKALB, GENTRY, GRUNDY,

HARRISON, HENRY, HOLT, HOWARD, JOHNSON, LAFAYETTE, LINN,

LIVINGSTON, MERCER, NODAWAY, PETTIS, SALINE, SULLIVAN AND WORTH

COUNITES

Power equipment operators:

GROUP 1.....................$ 34.73 18.20

GROUP 2.....................$ 34.33 18.20

GROUP 3.....................$ 32.33 18.20

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 1: Asphalt roller operator, finish; asphalt paver and spreader; asphalt plant operator; auto grader or trimmer or sub-grader; backhoe; blade operator (all types); boilers -

2; booster pump on dredge; bulldozer operator; boring machine (truck or crane mounted); clamshell operator;

concrete mixer paver; concrete plant operator; concrete pump operator; crane operator; derrick or derrick trucks;

ditching machine; dragline operator; dredge engineman;

dredge operator; drill cat with compressor mounted

(self-contained) or similar type self- propelled rotary drill (not air tract); drilling or boring machine

(rotary-self-propelled); finishing machine operator;

greaser; high loader-fork lift-skid loader (all types);

hoisting engineer (2 active drums); locomotive operator

(standard guage); mechanics and welders (field and plants);

mucking machine operator; pile drive operator; pitman crane or boom truck (all types); push cat; quad track; scraper operators (all types); shovel operator; sideboom cats; side discharge spreader; skimmer scoop operators; slip form paver operator (CMI, Rex, Gomeco or equal); la tourneau rooter (all tiller types); tow boat operator; truck crane;

wood and log chippers (all types).

GROUP 2: A-frame truck operator; articulated dump truck;

back filler operator; boilers (1); chip spreader; churn drill operator; compressor; concrete mixer operator, skip loader; concrete saws (self-propelled); conveyor operator;

crusher operator; distributor operator; elevating grader operator; farm tractor (all attachments); fireman rig;

float operator; form grade operator; hoisting engine (one drum); maintenance operator; multiple compactor; pavement breaker, self-propelled hydra-hammer (or similar type);

paymill operator; power shield; pumps; roller operator

(with or without blades); screening and washing plant;

self-propelled street broom or sweeper; siphons and jets;

straw blower; stump cutting machine; siphons and jets; tank car heater operator (combination boiler and booster);

welding machine; vibrating machine operator (not hand held); welding machine.

GROUP 3: (a) Oiler;

(b) Oiiler driver

(c) Mechanic.

HOURLY PREMIUMS:

THE FOLLOWING CLASSIFICATIONS SHALL RECEIVE ($ .25) ABOVE

GROUP 1 RATE: Dragline operator - 3 yds. & over; shovel

3 yds. & over; clamshell 3 yds. & over; Crane, rigs or piledrivers, 100' of boom or over (incl. jib.), hoist -each additional active drum over 2 drums

THE FOLLOWING CLASSIFICATIONS SHALL RECEIVE ($ .50) ABOVE

GROUP 1 RATE: Tandem scoop operator; crane, rigs or piledrivers 150' to 200' of boom (incl. jib.)

THE FOLLOWING CLASSIFICATIONS SHALL RECEIVE ($ .75) ABOVE

GROUP 1 RATE: Crane rigs, or piledrivers 200 ft. of boom or over (including jib.)

ENGI0101-005 04/01/2020

CASS, CLAY, JACKSON,PLATTE AND RAY COUNTIES

GROUP 1.....................$ 37.02 19.89

GROUP 2.....................$ 35.98 19.89

GROUP 3.....................$ 31.51 19.89

GROUP 4.....................$ 34.86 19.89

GROUP 1: Asphalt roller operator, finish; asphalt paver and spreader; asphalt plant operator; auto grader or trimmer or sub-grader; backhoe; blade operator (all types); boilers-2;

booster pump on dredge; boring machine (truck or crane mounted); bulldozer operator; clamshell operator; concrete cleaning decontamination machine operator; concrete mixer paver; concrete plant operator; concrete pump operator;

crane operator; derrick or derrick trucks; ditching machine; dragline operator; dredge engineman; dredge operator; drillcat with compressor mounted (self-contained) or similar type self propelled rotary drill (not air tract); drilling or boring machine (rotary -self-propelled); finishing machine operator; greaser; heavy equipment robotics operator/mechanic; horizontal directional drill operator; horizontal directional drill locator; loader-forklift - skid loader (all types);

hoisting engineer (2 active drums); locomotive operator

(standard guage); master environmental maintenance mechanic; mechanics and welders (field and plants);

mucking machine operator; piledrive operator; pitman crane or boom truck (all types); push cat; quad-track; scraper operators (all types); shovel operator; side discharge spreader; sideboom cats; skimmer scoop operator; slip-form paver (CMI, REX, Gomaco or equal); la tourneau rooter (all tiller types); tow boat operator; truck crane; ultra high perssure waterjet cutting tool system operator/mechanic;

vacuum blasting machine operator/mechanic; wood and log chippers (all types)

GROUP 2: ""A"" Frame truck operator; back filler operator;

boilers (1); chip spreader;churn drill operator; concrete mixer operator, skip loader; concrete saws

(self-propelled); conveyor operator; crusher operator;

distributor operator; elevating grader operator; farm tractor (all attachments); fireman rig; float operator;

form grader operator; hoisting engine (1 drum); maintenance operator; multiple compactor; pavement breaker, self-propelled hydra- hammer (or similar type); power shield; paymill operator; pumps; siphons and jets; stump cutting machine; tank car heater operator (combination boiler and booster); compressor; roller operator (with or without blades); screening and washing plant;

self-propelled street broom or sweeper; straw blower; tank car heater operator (combination boiler and booster);

vibrating machine operator (not hand held)

GROUP 3: Oilers

GROUP 4: Oiler Driver (All Types)

FOOTNOTE:

HOURLY PREMIUMS FOLLOWING CLASSIFICATIONS SHALL RECEIVE

($1.00) ABOVE GROUP 1 RATE:

Clamshells - 3 yd. capacity or over; Cranes or rigs, 80 ft.

of boom or over (including jib); Draglines, 3 yd. capacity or over;

Piledrivers 80 ft. of boom or over (including jib);

Shovels & backhoes, 3 yd. capacity or over.

ENGI0101-022 05/01/2019

BARRY, BARTON, CAMDEN, CEDAR, CHRISTIAN, DADE, DALLAS, DOUGLAS,

GREENE, HICKORY, JASPER, LACLEDE, LAWRENCE, MCDONALD, NEWTON,

OZARK, POLK, ST. CLAIR, STONE, TANEY, VERNON, WEBSTER AND

WRIGHT COUNTIES and CITY OF SPRINGFIELD

GROUP 1.....................$ 31.72 14.88

GROUP 2.....................$ 31.37 14.88

GROUP 3.....................$ 31.17 14.88

GROUP 4.....................$ 29.12 14.88

GROUP 1: Asphalt finishing machine & trench widening spreader; asphalt plant console operator; autograder;

automatic slipform paver; backhoe; blade operator - all types; boat operator - tow; boilers-2; central mix concrete plant operator; clamshell operator; concrete mixer paver;

crane operator; derrick or derrick trucks; ditching machine; dozer operator; dragline operator; dredge booster pump; dredge engineman; dredge operator; drill cat with compressor mounted on cat; drilling or boring machine rotary self-propelled; highloader; hoisting engine - 2 active drums; launch hammer wheel; locomotive operator; -standard guage; mechanic and welders; mucking machine;

off-road trucks; piledriver operator; pitman crane operator; push cat operator; quad trac; scoop operator -all types; shovel operator; sideboom cats; skimmer scoop operators; trenching machine operator; truck crane.

GROUP 2: A-frame; asphalt hot-mix silo; asphalt plant fireman (drum or boiler); asphalt plant man; asphalt plant man; asphalt plant mixer operator; asphalt roller operator;

backfiller operator; barber-greene loader; boat operator

(bridges and dams); chip spreader; concrete mixer operator

- skip loader; concrete plant operator; concrete pump operator; crusher operator; dredge oiler; elevating grader operator; fork lift; greaser-fleet; hoisting engine - 1;

locomotive operator - narrow gauge; multiple compactor;

pavement breaker; powerbroom - self-propelled; power shield; rooter; side discharge concrete spreader; slip form finishing machine; stumpcutter machine; throttle man;

tractor operator (over 50 h.p.); winch truck.

GROUP 3: Boilers - 1; chip spreader (front man); churn drill operator; clef plane operator; concrete saw operator (self-propelled); curb finishing machine; distributor operator;

finishing machine operator; flex plane operator; float operator; form grader operator; pugmill operator; roller operator, other than high type asphalt; screening & washing plant operator; siphons & jets; sub-grading machine operator; spreader box operator, self-propelled (not asphalt); tank car heater operator (combination boiler & booster); tractor operator (50 h.p. or less); Ulmac, Ulric or similar spreader; vibrating machine operator, not hand;

GROUP 4: Grade checker; Oiler; Oiler-Driver

The following classifications shall receive $ .25 above GROUP

1 rate:

Clamshells - 3 yds. or over; Cranes - Rigs or Piledrivers, 100 ft. of boom or over (including jib);

Draglines - 3 yds. or over; Hoists - each additional active drum over 2 drums; Shovels - 3 yds. or over;

The following classifications shall receive $ .50 above GROUP

Tandem scoop operator; Cranes - Rigs or Piledrivers, 150 ft.

to 200 ft. of boom (including jib); Tandem scoop.

The following classifications shall receive $ .75 above GROUP

Cranes - Rigs or Piledrivers, 200 ft. of boom or over

(including jib.).

ENGI0513-004 05/06/2019

FRANKLIN, JEFFERSON, LINCOLN, ST CHARLES, AND WARREN COUNTIES

GROUP 1.....................$ 34.36 27.36

GROUP 2.....................$ 34.36 27.36

GROUP 3.....................$ 33.06 27.36

GROUP 4.....................$ 32.61 27.36

GROUP 1: Backhoe, Cable; Backhoe, Hydraulic (2 cu yds bucket and under regardless of attachment, one oiler for 2 or 3, two oilers for 4 through 6); Backhoe, Hydraulic over 2 cu yds; Cableway; Crane, Crawler or Truck; Crane, Hydraulic -

Truck or Cruiser mounted, 16 tons and over; Crane, Locomotive; crane with boom including jib over 100 ft from pin to pin; Crane using rock socket tool; Derrick, Steam;

Derrick Car and Derrick Boat; Dragline, 7 cu yds and over;

Dredge; Gradall, Crawler or tire mounted; Locomotive, Gas, Steam & other powers; Pile Driver, Land or Floating; Scoop, Skimmer; Shovel, Power (Electric, Gas, Steam or other powers); Shovel, Power (7 cu yds and over); Switch Boat;

Whirley; Air Tugger with air compressor; Anchor Placing

Barge; Asphalt Spreaker; Athey Force Feeder Loader, self-propelled; Backfilling Machine; Boat Operator - Push

Boat or Tow Boat (job site); Boiler, High Pressure Breaking in Period; Boom Truck, Placing or Erecting; Boring Machine, Footing Foundation; Bullfloat; Cherry Picker; Combination

Concrete Hoist and Mixer (such as Mixermobile); Compressor, Two 125 CFM and under; Compressor, Two through Four over

125 CFM; Compressor when operator runs throttle; Concrete

Breaker (Truck or Tractor mounted); Concrete Pump (such as

Pumpcrete machine); Concrete Saw (self-propelled); Concrete

Spreader; Conveyor, Large (not selfpropelled) hoisting or moving brick and concrete into, or into and on floor level, one or both; Crane, Cimbing (such as Linden); Crane, Hydraulic - Rough Terrain, self-propelled; Crane, Hydraulic

- Truck or Cruiser mounted - under 16 tons; Drilling machine - Self-powered, used for earth or rock drilling or boring (wagon drills and any hand drills obtaining power from other souces including concrete breakers, jackhammers and Barco equipmnet no engineer required); Elevating

Grader; Engine Man, Dredge; Excavator or Powerbelt Machine;

Finishing Machine, self- propelled oscillating screed;

Forklift; Generators, Two through Six 30 KW or over;

Grader, Road with power blade; Greaser; Highlift; Hoist, Concrete and Brick (Brick cages or concrete skips operating or on tower, Towermobile, or similar equipment); Hoist, Three or more drums in use; Hoist, Stack; Hydro-Hammer;

Lad-A-Vator, hoisting brick or concrete; Loading Machine such as Barber-Greene; Mechanic on job site

GROUP 2: Air Tugger with plant air; Boiler (for power or heating shell of…