Amendment 0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04 EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

KANSAS CITY LEVEE AMOURDALE/CID PUMP STATION REPAIRS -

--See Continuation Page for Solicitation Instructions--

PROPOSAL DUE DATE REMAINS UNCHANGED.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 14

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA 15C. DATE SIGNED 15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer) (Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912DQ20B1004

X 9B. DATED (SEE ITEM 11)

17-Jul-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

U0001

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Aug-2020

CODE

USACE, KANSAS CITY +

FEDERAL BUILDING CT-M, RM 647 601 EAST 12TH S

KANSAS CITY MO 64106-2896

W912DQ 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODE CODE

EMAIL: TEL:

W912DQ20B1004

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

AMENDMENT 0001

The SOLICITATION is amended as follows:

Deleted text is shown with a strikethrough. Added text is shown with underline.

1. This amendment is to add the Definitive Responsibility Criteria

2. This amendment is to delete the Solicitation Provision - 52.204-24, REPRESENTATION REGARDING

CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT

in its entirety and replaced

3. This amendment is to delete the Solicitation Clause - 52.204-25, PROHIBITION ON CONTRACTING

FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT in its entirety and replaced

4. This amendment is to add the Solicitation Clause - 52.204-26 COVERED TELECOMMUNICATIONS

EQUIPMENT OR SERVICES-REPRESENTATION

5. SPECIFICATION CHANGES – See below

6. DRAWING CHANGES – See Below

7. Bid Due Date remains unchanged,

8. Offeror is required to acknowledge receipt of this amendment. Failure to acknowledge this amendment may cause rejections of the proposal.

9. All other terms and conditions remain unchanged and in full force.

DIVISION 00 – PROCUREMENT AND CONTRACTING REQUIREMENTS

Definitive Responsibility Criteria. In addition to examining the criteria in FAR 9.104-1, the Contracting Officer will also examine whether the low bidder for each levee unit contract can meet the requirements of two definitive responsibility criteria. The apparent low bidder(s) will be required to meet the following experience requirements:

1. A project completed within the last 10 years where the prime (or subconsultant identified with a letter of commitment for this project) has installed new Line shaft vertical turbine pumps or repaired/rehabilitated existing Line shaft vertical turbine pumps;

2. A project completed within the last 10 years where the prime (or subconsultant identified with a letter of commitment for this project) has completed concrete and/or steel improvements to an existing facility; and

3. A project completed within the last 10 years where the prime (or subconsultant identified with a letter of commitment for this project) has completed work within an existing or new pump station (WWTP, potable water, storm sewer, or combined sewer).

The Contracting Officer will verify the submitted projects meet the definitive responsibility criteria as part of the responsibility determination. Bidders are not required to submit additional documentation related to these criteria at the time of bid but may elect to submit the necessary information with their bid package and are encouraged to do so in the interest of time and efficiency.

Bidders are neither penalized for not doing so, nor rated on any information provided. If responsibility information is provided with the bid package, it must be sealed in a separate envelope marked “Responsibility Information”, and it will not be opened or reviewed prior to establishment of the apparent low bidder. If not included in the bid package, the required information must be provided to the Contracting Officer within three business days after bid opening.

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

DELETED

SURVEILLANCE SERVICES OR EQUIPMENT (DEC 2019)

The following Provision 52.204-24 needs to be acknowledged, filled in (highlighted area) and returned to the contracting officer with the Bid Package which is due by 2:00 p.m. September 3, 2020. Reminder if your firm intends to submit a bid for these projects please contact Jay Denker by 2:00 p.m. August 26, at jay.b.denker@usace.army.mil, for final bid opening details.

Replaced with:

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT (AUG 2020)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it “does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument” in the provision at 52.204-26, Covered Telecommunications Equipment or Services— Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Items.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or mailto:jay.b.denker@usace.army.mil

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract.

Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services.”

(d) Representations. The Offeror represents that—

(1) It [] will, [] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds “will” in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that—

It [] does, [] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does” in paragraph (d)(2) of this section.

(e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded “will” in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable);

and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided;

and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded “does” in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable);

and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

Deleted

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. AUG 2019

Replaced with:

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR

EQUIPMENT (AUG 2020)

(a) * * *

Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network).

Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet).

Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another's network to hand off traffic where it is ultimately delivered (e.g., connection of a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources.

Reasonable inquiry means an inquiry designed to uncover any information in the entity's possession about the identity of the producer or provider of covered telecommunications equipment or services used by the entity that excludes the need to include an internal or third-party audit.

Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high.

(b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract, or extending or renewing a contract, with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract.

End of Clause

Added:

52.204-26 Covered Telecommunications Equipment or Services-Representation.

Covered Telecommunications Equipment or Services-Representation (Dec 2019)

(a) Definitions. As used in this provision, “covered telecommunications equipment or services” has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(c) Representation. The Offeror represents that it □ does, □ does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of provision)

SPECIFICATIONS:

1. ARMOURDALE UNIT SPECIFICATIONS:

Section 05 50 15, Paragraph 2.3.1.C.3 Delete - Approved Equal Removed and Replaced with Additional manufacturers who meet the criteria listed.

Section 05 50 15, Para 2.3.1.D.1 Remove in its entirety.

Section 05 50 15, Para 2.3.1.D.2

Revised to add… of sealing perimeter.

Section 26 20 00, Para 1.3 Add Cable and Conduit Schedule; G, AE

Section 26 20 00, Para 2.1 Add Cable and Conduit Schedule submittal shall be provided for approval.

Schedule will show specified conduit, size, length, and manufacturer material certifications.

Section 26 20 00, Para 2.13.8 Add 6. Under/over voltage.;7. Under/over frequency.

Section 35 45 01, Para 1.2 Revised Hydraulic Institute publication reference dates to more recent publications.

Section 35 45 01, Para 2.1.1

Insert G. Minimum pump intake clearance to wet-well floor shall meet ANSI/ HI criteria to be equal to one half the proposed suction bell diameter.

Renumbered remaining lines in section H, I, J

Section 35 45 01, Para 2.4.6.7

Remove as manufactured by Teekay or Straub Couplings https://www.acquisition.gov/content/part-52-solicitation-provisions-and-contract-clauses#unique_531032845 https://www.sam.gov/

Remove as manufactured by Victaulic, or Dresser Couplings style 38 or approved equal Add bolted sleeve type coupling per AWWA C219, Section 35 45 01, Para 2.5 Insert Section 2.5 Knife Gate Valves and renumbered remaining lines in Section 2

Section 35 45 01, Para 3.2 Add For each test, identify data to be recorded and the planned outcome (or range) of the test points.

Section 35 45 01 Para 3.2.1.a Add Document all abnormal conditions or failures recorded during testing and document their resolution in the Test Report.

Section 40 95 00, Para 1.4 Add 6. EN Automation (913) 901-4353

7. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.2.1.1 Add c. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.2.1.2.b Remove No equals accepted

Add Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.3 Remove Subject to compliance with the Contract Documents, the following manufacturers are acceptable:1. Allen-Bradley, CompactLogix. a. No "equals" acceptable.

Add Existing PLC system for the owner is Allen-Bradley, CompactLogix. The new PLC must meet the following criteria and be compatible with existing system.

Section 40 95 00, Para 2.3 Power Supply Units

Section 40 95 00, Para 2.3 Uninterruptible Power Supply (UPS) Add 2.3.d. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.4 Remove Utilize Allen-Bradley's standard Studio 5000/RSLogix 5000 programming software.

Add Existing PLC software systems used by the owner is Allen-Bradley's standard Studio 5000/RSLogix 5000 programming software. The new PLC software must be compatible with the existing software.

Section 40 95 00, Para 2.5.1.4 Relays

Add 4. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.5.1.4 Time Delay Relays Add d. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.5.1.5

Add 3. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.5.1.6 Acceptable Manufacturers

Section 40 95 00, Para 2.5.2 Approved Products Add 5. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.6.1.B

Section 40 95 00, Para 2.6.2.B.1 Add e. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.6.2.B.2

Section 40 95 00 Para 2.7.A.1 Add f. Additional manufacturers who meet the criteria listed.

Section 40 95 00 Para 2.8

Remove Acceptable Manufacturers:1. Microwave Data Systems (MDS)NX915

Add Existing radios on owners system are Microwave Data Systems (MDS) NX915.

The new radio must meet the following criteria and be compatible with existing system.

Section 40 95 00, Para 2.9 Remove A. Acceptable Manufacturers:1. Per Owner direction.

Add Control panel must have space available for a future cellular modem. Anticipate future modem requires 12-inch by 12-inch area inside panel. Cellular modem to be provided for others on future project.

Section 40 95 00, Para 2.10.A.1

Section 40 95 00, Para 3.6.1.C.6 RemoveAll motors (constant and variable speed) must be monitored for the associated Run, Stop, and

Fail status.

Replace All motors (constant and variable speed) furnished under this contract must be monitored for the associated Run, Stop, and Fail status.

Section 40 95 00, Para 3.6.2.3.A.3.b Table -- Column 2 Hi-hi float switch elevation Delete 735.38 Replace with 742.38

Section 40 95 00, Para 3.6.2.5.3.b Table -- Column 1

Delete Both Pumps On Replace with All pumps off

Section 40 95 00, Para 3.6.2.5.3.b Table -- Column 2 -- Hi-hi float switch elevation Delete 743.80 Replace with 742.35

Section 40 95 00, Para 3.6.2.6.A.3

Section 40 95 00, Para 3.6.2.7.A.3

Table -- Column 2 -- Hi-hi float switch elevation Delete 749.00 Replaced with 742.66

Section 40 95 00, Para 3.6.2.8.B.3

Section 40 95 00, Para 3.6.2.9.A.3

Table -- Column 2 -- Lead pump on elevation Delete 749.10 Replace with 750.90

Lag pump on elevation Delete 750.90 Replace with 751.40

Both pumps on elevation Delete 751.40 Replace with 749.10

Hi-hi float switch elevation Delete 754.50 Replace with 752.40

Section 40 95 00, Para 3.6.2.10.B.3

Table -- Column 1 Both Pumps On

Section 40 95 00 ATTACHMENT 1-- Table -- Column 3 Level float switch, high-high elevation

Delete 739.97 Replace with 742.49

Level float switch, high-low elevation Delete 736.81 Replace with 735.49

2. CID UNIT SPECIFICATIONS:

Section 05 50 15, Paragraph 2.3.1.C.3 Delete - Approved Equal Removed and Replaced with Additional manufacturers who meet the criteria listed.

Section 05 50 15, Para 2.3.1.D.1 Remove in its entirety.

Section 05 50 15, Para 2.3.1.D.2

Revised to add… of sealing perimeter.

Section 26 20 00, Para 1.3 Add Cable and Conduit Schedule; G, AE

Section 26 20 00, Para 2.1 Add Cable and Conduit Schedule submittal shall be provided for approval.

Schedule will show specified conduit, size, length, and manufacturer material certifications.

Section 26 20 00, Para 2.13.8 Add 6. Under/over voltage.;7. Under/over frequency.

Section 35 45 01, Para 1.2 Revised Hydraulic Institute publication reference dates to more recent publications.

Section 35 45 01, Para 2.1.1

Insert G. Minimum pump intake clearance to wet-well floor shall meet ANSI/ HI criteria to be equal to one half the proposed suction bell diameter.

Renumbered remaining lines in section H, I, J

Section 35 45 01, Para 2.4.6.7

Remove as manufactured by Teekay or Straub Couplings Remove as manufactured by Victaulic, or Dresser Couplings style 38 or approved equal Add bolted sleeve type coupling per AWWA C219, Section 35 45 01, Para 3.2 Add For each test, identify data to be recorded and the planned outcome (or range) of the test points.

Section 35 45 01 Para 3.2.1.a

Add Document all abnormal conditions or failures recorded during testing and document their resolution in the Test Report.

Section 40 95 00, Para 1.4

Add 6. EN Automation (913) 901-4353

7. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.2.1.1

Section 40 95 00, Para 2.2.1.2.b Remove No equals accepted

Add Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.3 Remove Subject to compliance with the Contract Documents, the following manufacturers are acceptable:1. Allen-Bradley, CompactLogix. a. No "equals" acceptable.

Add Existing PLC system for the owner is Allen-Bradley, CompactLogix. The new PLC must meet the following criteria and be compatible with existing system.

Section 40 95 00, Para 2.3 Power Supply Units

Section 40 95 00, Para 2.3 Uninterruptible Power Supply (UPS) Add 2.3.d. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.4 Remove Utilize Allen-Bradley's standard Studio 5000/RSLogix 5000 programming software.

Add Existing PLC software systems used by the owner is Allen-Bradley's standard Studio 5000/RSLogix 5000 programming software. The new PLC software must be compatible with the existing software.

Section 40 95 00, Para 2.5.1.4 Relays

Section 40 95 00, Para 2.5.1.4 Time Delay Relays

Section 40 95 00, Para 2.5.1.5 Add 3. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.5.1.6 Acceptable Manufacturers

Section 40 95 00, Para 2.5.2 Approved Products

Section 40 95 00, Para 2.6.1.B

Section 40 95 00, Para 2.6.2.B.1

Add e. Additional manufacturers who meet the criteria listed.

Section 40 95 00, Para 2.6.2.B.2

Section 40 95 00 Para 2.7.A.1

Add f. Additional manufacturers who meet the criteria listed.

Section 40 95 00 Para 2.8 Remove Acceptable Manufacturers:1. Microwave Data Systems (MDS)NX915

Add Existing radios on owners system are Microwave Data Systems (MDS) NX915.

The new radio must meet the following criteria and be compatible with existing system.

Section 40 95 00, Para 2.9 Remove A. Acceptable Manufacturers:1. Per Owner direction.

Add Control panel must have space available for a future cellular modem. Anticipate future modem requires 12-inch by 12-inch area inside panel. Cellular modem to be provided for others on future project.

Section 40 95 00, Para 2.10.A.1

Section 40 95 00, Para 3.6.1.C.6 RemoveAll motors (constant and variable speed) must be monitored for the associated Run, Stop, and

Fail status.

Replace All motors (constant and variable speed) furnished under this contract must be monitored for the associated Run, Stop, and Fail status.

Section 40 95 00, Para 3.6.2.3.A.3.b Table -- Column 2 Hi-hi float switch elevation Delete 773.89 Replace with 743.87

Section 40 95 00, Para 3.6.2.2.B.d.3 Table -- Column 2 Low-low float switch elevation Delete 741.52 Replace with 740.00

Section 40 95 00 ATTACHMENT 1-- Table -- Column 3 Level float switch, low-low elevation

Delete 741.52 Replace with 740.00

3. ARMOURDALE UNIT DRAWINGS

Revised drawings have revisions shown as clouded areas marked as Amendment 1.

Revised drawing sheets include:

FX102

FS502

FD101

FD151

MS102

MD102

ME101

ME151

OX302

OS501

OE151

4. CID UNIT DRAWINGS

Revised drawings have revisions shown as clouded areas marked as Amendment 1.

Revised drawing sheets include:

OS101

OD101