Mowing_RFQ_Attachments_-_Pomme_de_Terre_Lake_Project_20180119.pdf

8 R 05

Building Strong

Mowing and Trimming

Pomme de Terre Hickory County, Missouri

Request for Quote Attachments

January 8

PERFORMANCE WORK STATEMENT

ADMINISTRATIVE AREAS

MOWING AND TRIMMING SERVICES

U.S. Army Corps of Engineers

Smithville Lake Project, Missouri

01 January 2018

PERFORMANCE WORK STATEMENT

1. General Information: Any resulting contract shall become effective on the date of award

(estimated 01 April 2018) and shall remain in effect through 31 March 2019 (this period constitutes “base year” of contracts). Effective dates of renewal options, IF EXERCISED, shall be from 01 April 2019 through 31 March of 2020; 01 April 2020 through 31 March 2021; 01

April 2021 through 31 March 2022, and 01 April 2022 through 31 March 2023, (up to 4 renewal options). Exercise of options is at the discretion of the Government, not of the

Contractor.

1.1 Background. Lawn care procurements utilized by the Pomme de Terre Lake Project, Kansas City District, Corps of Engineers, encompass mowing, trimming, and edging services necessary to maintain the administration area as specified. This procurement includes limited amounts of cutting by hand where obstructions or steepness prevents access by machinery.

Trimming around signs and buildings, trees, and park equipment will be required.

1.2 Scope of Work: The Contractor shall provide all manpower, equipment, fuel, tools, and supplies necessary to provide lawn care services for specified areas of the Pomme de Terre

Lake Project near Hermitage, Missouri as described in the attached performance work statement (PWS) and elsewhere in the contract. The Contractor shall be responsible for determining exact acreage and conditions affecting performance of this work.

1.3 Dates of Performance: Actual duties will be performed during the spring thru fall growing season beginning 1 April and continuing through 31 October.

1.4 Post-award Conference: After award but prior to commencement of work, the

Contractor shall contact the Contracting Officer’s Representative, to arrange a meeting at the Project Office for the purpose of discussing contract requirements and details of the contract performance.

1.5 Ordering Services:

1.5.1 Individual orders for required services will be issued by telephone and/or confirmation in writing to the Contractor or his responsible individual. Telephone orders will be considered issued at such time as it is delivered to the telephone number provided by the contractor. The contractor shall commence the ordered service(s) within 48 consecutive hours after receipt of verbal telephone order or date specified in the order (whichever is later), and complete the work in the time specified in attachment 6.2.

1.5.2 Total area to be serviced is divided into two areas. Area One consists of an area that is partially irrigated and may require more services than Area Two, the non-irrigated area. The

Government may order any item individually, or any combination of items per order, up to and including all items.

1.5.3 The Contractor shall furnish a telephone number attended during normal business hours

(7:30 a.m. – 4:00 p.m., CST) to which calls concerning contractual matters can be placed or provide an answering service a message can be delivered. For the purpose of time and date, a message will be deemed delivered to the Contractor, at such time as it is delivered to the number provided by the Contractor.

1.5.4 Although weather and amount of rainfall could affect the actual number of required servicing, the maximum number required per annum shall be no greater than as shown in attachment 6.2.

1.6 Performance Requirements: Services shall be performed, as ordered, Monday through

Friday, between the hours of 7:00 a.m. and 8:30 p.m. Work will not be permitted on

Saturdays, Sundays, and holidays unless this restriction is specifically waived in writing by the Contracting Officer’s Representative.

1.7 Quality Control/Activity Hazard Analysis:

1.7.1 The Contractor shall develop a Quality Control Plan designed to demonstrate how the

Contractor shall meet the needs of the project. The Contractor shall also develop an Activity

Hazard Analysis (EM 385-1-1 Section 01.A.13) identifying potential safety and health hazards and controls for such hazards. Quality Control Plan and Activity Hazard Analysis shall be delivered to the Contracting Officer Representative for approval.

1.7.2 The Contractor shall provide and maintain an inspection system acceptable to the government covering the services under this contract. Complete records of all inspection work performed by the Contractor shall be maintained and made available to the government during the contract.

1.7.3 The Contractor shall designate, in writing, a responsible member of each work crew who shall serve as a contact for matters involving quality, performance or non-performance of the required work assigned to that crew. The Contracting Officer reserves the right to disapprove any individual whom he considers to be incompetent to perform the work required. Such disapproval will be given to the Contractor by written notice, and the Contracting Officer’s decision shall represent a final decision.

1.8 Safety Requirements:

1.8.1 In order to provide safety controls for protection to the life and health of employees and other persons; for prevention of damage to property, materials, supplies and equipment; and for avoidance of work interruptions in the performance of this contract, the Contractor shall comply with all pertinent provisions of the Federal, State, and local regulations and shall take or cause to be taken such additional measures as the Contracting Officer may determine to be reasonable and necessary for the purpose.

1.8.2 All mowers and trimming equipment shall be equipped and maintained with discharge-deflection devices and/or other approved safety devices to prevent accidental damage or injury from objects thrown by mowers. All equipment shall be equipped and maintained with safety chains, safety guards and shields to prevent accidental damage or injury from objects thrown by mowers. Safety guards and shields shall be maintained in good condition and kept in place while mowing and trimming. Requirements of EM 385-1-1 Safety and Health Requirements

Manual (http://publications.usace.army.mil/publications/) will be maintained.

1.8.3 The Contractor shall take such measures as necessary to protect the public and property from foreign material thrown from rotary mowers and other rotating equipment while operating adjacent to public roadways and other areas when people are present.

1.8.4 Any injury, property damage, equipment malfunction or safety hazard observed by the

Contractor shall be immediately reported to the Project Office.

1.8.5 In the event adverse weather or ground conditions occur after placement of an order for services, that would create unsafe working conditions or result in damage to vegetation or turf, the contractor shall cease operations and contact project personnel. Work affected by adverse conditions shall be stopped, restarted, or rescheduled at a mutually agreed upon time, to the extent possible. Payment will not be made for work not performed as a result of wet weather conditions unless an alternate date for services can be arranged, and services are performed.

1.9 Insurance: The Contractor shall provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in accordance with applicable State Statute. The Contactor shall furnish proof of required insurance in the form of a copy of the insurance policy, a binder issued by the insurer, or a vehicle insurance card. Proof of proper insurance shall be delivered to the Contracting Officer either at the post award conference or prior to starting work. Information regarding State requirements may be obtained by contracting Division of Insurance, 573-751-4126 or www.insurance.mo.gov. Any damage to either government or public property shall be the responsibility of the contractor.

1.10 Contractor Personnel: All contractor personnel shall be fully clothed, at all times, while performing these services. Clothing shall be clean and neat in appearance. Contractor personnel shall utilize tact, diplomacy and courtesy at all times during contact with the public.

1.11 Quality Assurance:

1.11.1 A Quality Assurance Surveillance Plan (QASP) will be used during the life of the contract to ensure that the Contractor is performing the services required by this PWS in an http://publications.usace.army.mil/publications/) http://www.insurance.mo.gov/ acceptable manner. The Government develops the QASP and administers the plan through

Quality Assurance Evaluators (QAE)s.

1.11.2 The government has the right to inspect and test all services called for by the contract, to the extent practicable at all times and places during the term of the contract. The government shall perform inspections and tests in a manner that shall not unduly delay the work.

1.11.3 If any of the services do not conform to contract requirements, the government may require the contractor to perform the services again in conformity with contract requirements, at no increase in contract amount. When the defects in services cannot be corrected by re-performance, the government may (1) require the Contractor to take necessary action to ensure that future performance conforms to contract requirements and (2) reduce the contract price to reflect the reduced value of the services performed. Payment will not be made for work not performed or not performed to standard.

1.12 Coordination with the Project Office:

1.12.1 Lost Articles, Vandalism, and Facilities Malfunction: To assist the visiting public in reclaiming lost articles, all property left by visitors and found during contract operations shall be turned in to the Project Office. Any evidence of vandalism, instances of facilities not operating properly, or facilities in need of repair shall be reported immediately to Project personnel.

1.12.2 Service Worksheets. The Contractor’s representative at the job shall enter the time work began and completed on a Contractor’s Service Worksheet each day work is performed. Worksheets shall be turned in as directed by the Contracting Officer’s

Representative

2 Definitions and Acronyms: The following definitions and descriptions apply wherever the word, phrase, or acronym is used in this performance work statement.

Contracting officer's representative (COR) means an individual designated and authorized in writing by the contracting officer to perform specific technical or administrative functions.

Fully-Clothed: Deemed to mean that a sleeved shirt (or T-shirt), trousers, and shoes shall be worn at all times: except that this requirement shall not be construed to replace or eliminate the necessity for the wearing of appropriate protective clothing or devices as may be required for the work required.

Quality Control (QC): A method used by the Contractor to control the quality of goods and services provided.

Quality Assurance (QA): A method used by the Government to provide some measure of control over the quality of purchased goods and services received.

3. Government-Furnished Equipment, Materials and Supplies: Contractor Service

Worksheets.

4. Contractor Furnished Equipment and Supplies: The Contractor shall furnish all equipment, fuel, tools, and supplies to accomplish the services specified in this PWS. All equipment must be approved by the COR prior to initial use. All mowing and trimming equipment shall be of sufficient size and number to accomplish the required work in the time allowed. If it becomes apparent to the Government during the Contractor's performance that the required services may not be completed within the timeframes required herein, the Contracting

Officer may require a written plan that demonstrates how the contractor will meet performance timeframes required. Such direction will be issued to insure that required services will be completed within the timeframes specified. Equipment breakdown shall not relieve the

Contractor of the responsibility of performing the work as specified. The Contractor shall assure that he has, or can obtain on short notice, sufficient backup equipment to continue the services as specified without interruption in the event of mechanical failure of his primary equipment.

4.1 Mowers shall be finish type mowers with a cutting height adjustable from 1 to 4 inches.

Tractor-mounted mowers shall be lawn type. All mowers shall be equipped with adjustable side-mounted skids or wheels to prevent scalping. All mowing equipment shall be capable of producing a smooth cut, and shall be compatible with each other in mowing height and application of cut. Blades shall be sharpened and/or replaced often enough to assure smooth grass cut. All mowers shall be constructed to distribute grass clippings evenly to prevent clumps or windrows.

4.2 Trimming equipment shall consist of power hand mowers, "weed-eaters" or other type power trimmers, weed whips, and other equipment and tools as may be appropriate for the task.

4.3 Edging equipment shall consist of power or manual operated equipment to produce a uniform cut.

5. Specific Tasks: Extreme care shall be exercised when mowing and trimming around trees, bushes, shrubs, buildings, and other objects to insure that equipment does not come in contact with the object. All costs of repair or replacement in size and kind, resulting from damage by the Contractor's equipment shall be borne by the Contractor.

5.1 Mowing:

5.1.1 All mowing shall be completed in an area prior to moving to another area. Mowing shall be accomplished to within but no closer than twenty four (24 inches +/- six (6) inches of the trunk of any tree, bush, or shrub; and to within but no closer than twelve (12) inches +/- six (6) inches of any inanimate object such as walls, posts, signs, park equipment, or other such objects. All areas serviced shall present a neat, well-cared-for, evenly mowed appearance free from any un-mowed strips or streaks.

5.1.2 Exact boundaries of the area for which lawn care will be provided, height of cut, and other specific details shall be as directed by the COR.

5.1.3 Services shall not be permitted when ground conditions exist that will result in the turf being rutted or being otherwise disturbed during mowing operations. Mowers shall be operated in such a manner as to protect against the sod being torn by the wheels on turns.

5.1.4 The Administration Area Picnic Shelter is used heavily. Mowing shall be accomplished in such manner as to minimize disturbance of visitors using the facility.

5.1.5 Trimming: Trimming shall be accomplished either simultaneously or immediately following mowing. Trimming around trees, shrubs and bushes will not be required closer than two (2) inches of the trunk of any tree, shrub or bush. Trimming around buildings, sidewalks and other inanimate objects shall be to the last blade of grass. Movable objects shall be moved and the area around and under such objects shall be mowed and/or trimmed. Such objects shall be returned to their original positions following mowing and trimming. Sidewalks, entrances into buildings and building interiors shall be swept as needed to remove clippings.

5.1.6 Debris Disposal: Debris and clippings on sidewalks shall be promptly removed. Wood chips, decorative rock, etc. (placed around trees or within flower beds and ornamental plantings) that are scattered or otherwise disturbed by mowing, trimming or hand weeding operations shall be raked or gathered and replaced in their original location. Grass clippings, leaves, weeds, large twigs and limbs shall be disposed of in an area designated by the COR. Debris such as paper, cans, bottles, etc. shall be bagged and deposited in the closest designated dumpster.

5.2 Edging: Edging along sidewalks, curbing, or other structures shall consist of removing all vegetation for a distance of approximately one (1) inch outward from the edge of the structure, and deep enough to assure that vegetation is cut off approximately one-half (1/2) inch below ground surface. If the Contractor's method or edging equipment produces a slightly different effect, minor variations in the width and depth may be permitted with approval of the COR.

6. Applicable Publications and Attachments

6.1 Map: Location and Area Maps

Information on Pomme de Terre Lake can be found on the Internet at http://www.nwk.usace.army.mil/Locations/DistrictLakes/PommedeTerreLake.aspx

6.2 Maximum Number and Time Allowance for Services

AREAS, ACREAGES, QUANTITIES, TIME ALLOWED

MOWING AND TRIMMING SERVICES

POMME DE TERRE LAKE

MINIMUM MAXIMUM TIME ALLOWED

ESTMIATED NUMBER OF NUMBER OF TO COMPLETE

AREA ACRES MOWINGS MOWINGS REQUIRED SERVICES

Area 1 1.3 18 24 3

Area 2 3.99 16 20 4

Edging 5.29 3 3 1

Number of mowing’s ordered will be determined by seasonal conditions to meet the minimum number and not exceed the maximum number.

The term “required services” as applied to time allowed shall be deemed to include all trimming and debris removal services.

Acreages shown above are estimated and include areas with structures included. The Contractor shall be responsible for determining all acreages and conditions affecting the performance of the work.

6.3 Contractor Service Worksheet

SERVICE WORKSHEET

POMME DE TERRE LAKE ADMINISTRATION AREA

LAWN CARE

Contract No. W912DQ-18-C-XXXX

Order No. __________________________________

Date of Service: _____________________________

Time Work Began: ___________________________

Time Work Completed: _______________________

Number of People Working: ___________________

Requirements checked for completion.

1. Turf area presents even appearance free of un-mowed strips and ruts. Area free of debris. All areas within boundary checked for completeness. Sidewalks, building entrances/interiors swept. Disturbed objects returned to original location.

2. If edging ordered no vegetation within one inch of sidewalks curbs or structures.

3. Debris disposed of, trash removed to designated dumpster.

Contractor Comments: ___________________________________________________________________

Contractor (Representative’s) Signature

Attachment No. 6.4

Performance Requirements Summary (PRS)

ALP = Acceptable Level of Performance

Section

(Para)

Contract

Requirement

Performance

Standard

Lot

Description

ALP (%) Method of

Surveillance

1.5 Ordering of

Services

Timely completion and sequence of ordered services

Individual

Scheduled

Orders

100%

Compliant

Random

Surveillance

5.1 Mowing and

Trimming

Turf area presents even appearance free of un-mowed strips and ruts. Area free of debris.

Acre 98%

Compliant

Random

Surveillance and

Validated

Customer

Compliant

5.2 Edging Area along

sidewalks, curbing or other structures present no vegetation approx.. 1 inch outward from edge of structure.

Acre 98%

Compliant

Random

Surveillance and

Validated

Customer

Complaint

6.4 Performance Requirements Summary

Attachment No. 5

Performance Requirements Summary (PRS)

ALP = Acceptable Level of Performance

Section

(Para)

Contract

Requirement

Performance

Standard

Lot

Description

ALP (%) Method of

Surveillance

1.5 Ordering of

Services

Timely completion and sequence of ordered services

Individual

Scheduled

Orders

100%

Compliant

Random

Surveillance

5.1 Mowing and

Trimming

Turf area presents even appearance free of un-mowed strips and ruts. Area free of debris.

Acre 98%

Compliant

Random

Surveillance and

Validated

Customer

Compliant

5.2 Edging Area along

sidewalks, curbing or other structures present no vegetation approx.. 1 inch outward from edge of structure.

Acre 98%

Compliant

Random

Surveillance and

Validated

Customer

Complaint

SITE VISIT

MOWING AND TRIMMING SERVICES

POMME DE TERRE LAKE PROJECT

KANSAS CITY DISTRICT

U.S. ARMY CORPS OF ENGINEERS

Site visits may be arranged during normal duty hours by contacting:

POC:

Name: Shannon Henry

Email Address: Shannon.L.Henry@usace.army.mil

Telephone: (816) 389-2290

Address: Pomme de Terre Lake Project Office

U.S. Army Corps of Engineers

23697 County Road 218

Hermitage, MO 65668 mailto:Shannon.L.Henry@usace.army.mil

Supplemental Bid Schedule

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 Each

Lawn Care Services – Base Year FY 2018

The contractor shall furnish labor, equipment, supplies, insurance, and fuel necessary to accomplish lawn care services at the Administration Areas of Pomme de Terre

Lake Project, Missouri as defined in part 5 of the Performance Work Statement

(PWS) dated 01 January 2018. Applicable prevailing wage rates are included herein.

FFP

Period of Performance: 1 April 2018 through 31 March 2019

FOB: Destination

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001AA 24 Each

Mowing and Trimming – Area One

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 18 times, maximum is 24.

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001AB 20 Each

Mowing and Trimming – Area Two

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 16 times, maximum is 20.

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001AC 3 Each

Edging Services

The contractor shall performing lawn care services as defined in part 5.2.

FFP

NET AMT

0002 Each

Lawn Care Services – Option Year One FY 2019

If 2019 option is exercised the contractor shall furnish labor, equipment, supplies, insurance, and fuel necessary to accomplish lawn care services at the Administration

Areas of Pomme de Terre Lake Project, Missouri as defined in part 5 of the

Performance Work Statement (PWS) dated 01 January 2018. Applicable prevailing wage rates will be provided at time option is exercised

FFP

Period of Performance: 1 April 2019 through 31 March 2020

FOB: Destination

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002AA 24 Each

Mowing and Trimming – Area One

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 18 times, maximum is 24.

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002AB 20 Each

Mowing and Trimming – Area Two

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 16 times, maximum is 20.

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002AC 3 Each

Edging Services

The contractor shall performing lawn care services as defined in part 5.2.

0003 Each

Lawn Care Services – Option Year Two FY 2020

If 2020 option is exercised the contractor shall furnish labor, equipment, supplies, insurance, and fuel necessary to accomplish lawn care services at the Administration

Areas of Pomme de Terre Lake Project, Missouri as defined in part 5 of the

Performance Work Statement (PWS) dated 01 January 2018. Applicable prevailing wage rates will be provided at time option is exercised

FFP

Period of Performance: 1 April 2020 through 31 March 2021

FOB: Destination

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0003AA 24 Each

Mowing and Trimming – Area One

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 18 times, maximum is 24.

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0003AB 20 Each

Mowing and Trimming – Area Two

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 16 times, maximum is 20.

FFP

NET AMT

0003AC

3 Each

Edging Services

The contractor shall performing lawn care services as defined in part 5.2.

0004 Each

Lawn Care Services – Option Year Three FY 2021

If 2021 option is exercised the contractor shall furnish labor, equipment, supplies, insurance, and fuel necessary to accomplish lawn care services at the Administration

Areas of Pomme de Terre Lake Project, Missouri as defined in part 5 of the

Performance Work Statement (PWS) dated 01 January 2018. Applicable prevailing wage rates will be provided at time option is exercised.

FFP

Period of Performance: 1 April 2021 through 31 March 2022

FOB: Destination

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0004AA 24 Each

Mowing and Trimming – Area One

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 18 times, maximum is 24.

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0004AB 20 Each

Mowing and Trimming – Area Two

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 16 times, maximum is 20.

FFP

NET AMT

0004AC

3 Each

Edging Services

The contractor shall performing lawn care services as defined in part 5.2.

0005 Each

Lawn Care Services – Option Year Four FY 2022

If 2022 option is exercised the contractor shall furnish labor, equipment, supplies, insurance, and fuel necessary to accomplish lawn care services at the Administration

Areas of Pomme de Terre Lake Project, Missouri as defined in part 5 of the

Performance Work Statement (PWS) dated 01 January 2018. Applicable prevailing wage rates will be provided at time option is exercised.

FFP

Period of Performance: 1 April 2022 through 31 March 2023

FOB: Destination

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0005AA 24 Each

Mowing and Trimming – Area One

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 18 times, maximum is 24.

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0005AB 20 Each

Mowing and Trimming – Area Two

The contractor shall performing lawn care services as defined in part 5.1. Minimum guaranteed number is 16 times, maximum is 20.

FFP

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0005AC 3 Each

Edging Services

The contractor shall performing lawn care services as defined in part 5.2.

FFP

GRAND TOTAL BASE YEAR PLUS ALL OPTION YEARS

WD 15-5093 (Rev.-6) was first posted on www.wdol.gov on 01/16/2018

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5093

Daniel W. Simms Division of | Revision No.: 6

Director Wage Determinations| Date Of Revision: 01/10/2018

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Service Contract

Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts

State: Missouri

Area: Missouri Counties of Benton, Camden, Dent, Hickory, Laclede, Maries, Miller, Morgan, Phelps, Pulaski, St Clair

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 13.26

01012 - Accounting Clerk II 14.88

01013 - Accounting Clerk III 16.65

01020 - Administrative Assistant 19.61

01035 - Court Reporter 15.23

01041 - Customer Service Representative I 10.52

01042 - Customer Service Representative II 11.83

01043 - Customer Service Representative III 12.91

01051 - Data Entry Operator I 12.97

01052 - Data Entry Operator II 14.16

01060 - Dispatcher, Motor Vehicle 14.27

01070 - Document Preparation Clerk 13.74

01090 - Duplicating Machine Operator 13.74

01111 - General Clerk I 12.32

01112 - General Clerk II 13.44

01113 - General Clerk III 15.09

01120 - Housing Referral Assistant 16.97

01141 - Messenger Courier 11.87

01191 - Order Clerk I 11.27

01192 - Order Clerk II 12.30

01261 - Personnel Assistant (Employment) I 15.28

01262 - Personnel Assistant (Employment) II 17.09

01263 - Personnel Assistant (Employment) III 19.05

01270 - Production Control Clerk 19.45

01290 - Rental Clerk 12.62

01300 - Scheduler, Maintenance 13.61

01311 - Secretary I 13.61

01312 - Secretary II 15.23

01313 - Secretary III 16.97

01320 - Service Order Dispatcher 12.75

01410 - Supply Technician 19.61

01420 - Survey Worker 14.95

01460 - Switchboard Operator/Receptionist 11.08

01531 - Travel Clerk I 12.96

01532 - Travel Clerk II 14.00

01533 - Travel Clerk III 15.03

01611 - Word Processor I 12.13

01612 - Word Processor II 13.61

01613 - Word Processor III 15.23

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 22.23

05010 - Automotive Electrician 16.87

05040 - Automotive Glass Installer 15.76

05070 - Automotive Worker 15.76

05110 - Mobile Equipment Servicer 14.19

05130 - Motor Equipment Metal Mechanic 17.31

05160 - Motor Equipment Metal Worker 15.76

05190 - Motor Vehicle Mechanic 17.31

05220 - Motor Vehicle Mechanic Helper 13.33

05250 - Motor Vehicle Upholstery Worker 15.36

05280 - Motor Vehicle Wrecker 15.76

05310 - Painter, Automotive 16.62

05340 - Radiator Repair Specialist 15.76

05370 - Tire Repairer 11.30

05400 - Transmission Repair Specialist 17.31

07000 - Food Preparation And Service Occupations

07010 - Baker 12.02

07041 - Cook I 9.50

07042 - Cook II 10.96

07070 - Dishwasher 8.84

07130 - Food Service Worker 8.93

07210 - Meat Cutter 15.59

07260 - Waiter/Waitress 8.98

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 15.84

09040 - Furniture Handler 10.52

09080 - Furniture Refinisher 15.84

09090 - Furniture Refinisher Helper 12.95

09110 - Furniture Repairer, Minor 14.06

09130 - Upholsterer 14.59

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 9.89

11060 - Elevator Operator 11.52

11090 - Gardener 15.92

11122 - Housekeeping Aide 11.52

11150 - Janitor 11.52

11210 - Laborer, Grounds Maintenance 12.03

11240 - Maid or Houseman 9.13

11260 - Pruner 11.41

11270 - Tractor Operator 14.60

11330 - Trail Maintenance Worker 12.03

11360 - Window Cleaner 12.90

12000 - Health Occupations

12010 - Ambulance Driver 16.46

12011 - Breath Alcohol Technician 17.33

12012 - Certified Occupational Therapist Assistant 23.78

12015 - Certified Physical Therapist Assistant 22.02

12020 - Dental Assistant 15.71

12025 - Dental Hygienist 31.34

12030 - EKG Technician 26.27

12035 - Electroneurodiagnostic Technologist 26.27

12040 - Emergency Medical Technician 16.46

12071 - Licensed Practical Nurse I 15.49

12072 - Licensed Practical Nurse II 17.33

12073 - Licensed Practical Nurse III 19.31

12100 - Medical Assistant 12.40

12130 - Medical Laboratory Technician 14.79

12160 - Medical Record Clerk 16.05

12190 - Medical Record Technician 17.94

12195 - Medical Transcriptionist 15.99

12210 - Nuclear Medicine Technologist 37.96

12221 - Nursing Assistant I 10.30

12222 - Nursing Assistant II 11.58

12223 - Nursing Assistant III 12.64

12224 - Nursing Assistant IV 14.19

12235 - Optical Dispenser 12.71

12236 - Optical Technician 14.95

12250 - Pharmacy Technician 13.41

12280 - Phlebotomist 14.19

12305 - Radiologic Technologist 23.85

12311 - Registered Nurse I 21.22

12312 - Registered Nurse II 25.95

12313 - Registered Nurse II, Specialist 25.95

12314 - Registered Nurse III 31.40

12315 - Registered Nurse III, Anesthetist 31.40

12316 - Registered Nurse IV 37.64

12317 - Scheduler (Drug and Alcohol Testing) 21.46

12320 - Substance Abuse Treatment Counselor 18.09

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 18.13

13012 - Exhibits Specialist II 22.20

13013 - Exhibits Specialist III 24.99

13041 - Illustrator I 18.13

13042 - Illustrator II 22.20

13043 - Illustrator III 24.99

13047 - Librarian 22.63

13050 - Library Aide/Clerk 12.51

13054 - Library Information Technology Systems 20.44

Administrator

13058 - Library Technician 14.23

13061 - Media Specialist I 14.75

13062 - Media Specialist II 16.49

13063 - Media Specialist III 18.38

13071 - Photographer I 12.54

13072 - Photographer II 15.34

13073 - Photographer III 19.91

13074 - Photographer IV 24.34

13075 - Photographer V 30.59

13090 - Technical Order Library Clerk 15.50

13110 - Video Teleconference Technician 18.05

14000 - Information Technology Occupations

14041 - Computer Operator I 14.31

14042 - Computer Operator II 16.01

14043 - Computer Operator III 17.85

14044 - Computer Operator IV 19.84

14045 - Computer Operator V 21.96

14071 - Computer Programmer I (see 1) 19.31

14072 - Computer Programmer II (see 1) 23.93

14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1)

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 14.31

14160 - Personal Computer Support Technician 19.84

14170 - System Support Specialist 21.47

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 28.62

15020 - Aircrew Training Devices Instructor (Rated) 34.61

15030 - Air Crew Training Devices Instructor (Pilot) 39.95

15050 - Computer Based Training Specialist / Instructor 28.62

15060 - Educational Technologist 27.51

15070 - Flight Instructor (Pilot) 39.95

15080 - Graphic Artist 20.17

15085 - Maintenance Test Pilot, Fixed, Jet/Prop 37.48

15086 - Maintenance Test Pilot, Rotary Wing 37.48

15088 - Non-Maintenance Test/Co-Pilot 37.48

15090 - Technical Instructor 18.49

15095 - Technical Instructor/Course Developer 22.61

15110 - Test Proctor 14.92

15120 - Tutor 14.92

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 9.49

16030 - Counter Attendant 9.49

16040 - Dry Cleaner 12.22

16070 - Finisher, Flatwork, Machine 9.49

16090 - Presser, Hand 9.49

16110 - Presser, Machine, Drycleaning 9.49

16130 - Presser, Machine, Shirts 9.49

16160 - Presser, Machine, Wearing Apparel, Laundry 9.49

16190 - Sewing Machine Operator 13.13

16220 - Tailor 14.03

16250 - Washer, Machine 10.44

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 17.84

19040 - Tool And Die Maker 21.25

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 13.31

21030 - Material Coordinator 19.07

21040 - Material Expediter 19.07

21050 - Material Handling Laborer 11.58

21071 - Order Filler 11.62

21080 - Production Line Worker (Food Processing) 13.31

21110 - Shipping Packer 14.01

21130 - Shipping/Receiving Clerk 14.01

21140 - Store Worker I 12.67

21150 - Stock Clerk 17.05

21210 - Tools And Parts Attendant 13.31

21410 - Warehouse Specialist 13.31

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 23.51

23019 - Aircraft Logs and Records Technician 19.11

23021 - Aircraft Mechanic I 22.22

23022 - Aircraft Mechanic II 23.51

23023 - Aircraft Mechanic III 24.72

23040 - Aircraft Mechanic Helper 17.13

23050 - Aircraft, Painter 21.05

23060 - Aircraft Servicer 19.11

23070 - Aircraft Survival Flight Equipment Technician 21.05

23080 - Aircraft Worker 20.24

23091 - Aircrew Life Support Equipment (ALSE) Mechanic 20.24

I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 22.22

II

23110 - Appliance Mechanic 20.74

23120 - Bicycle Repairer 13.27

23125 - Cable Splicer 30.22

23130 - Carpenter, Maintenance 17.27

23140 - Carpet Layer 20.01

23160 - Electrician, Maintenance 18.79

23181 - Electronics Technician Maintenance I 23.34

23182 - Electronics Technician Maintenance II 24.89

23183 - Electronics Technician Maintenance III 26.76

23260 - Fabric Worker 18.22

23290 - Fire Alarm System Mechanic 20.52

23310 - Fire Extinguisher Repairer 16.97

23311 - Fuel Distribution System Mechanic 20.93

23312 - Fuel Distribution System Operator 16.20

23370 - General Maintenance Worker 15.55

23380 - Ground Support Equipment Mechanic 22.22

23381 - Ground Support Equipment Servicer 19.11

23382 - Ground Support Equipment Worker 20.24

23391 - Gunsmith I 16.97

23392 - Gunsmith II 19.39

23393 - Gunsmith III 21.71

23410 - Heating, Ventilation And Air-Conditioning 19.45

Mechanic

23411 - Heating, Ventilation And Air Contidioning 20.94

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 21.05

23440 - Heavy Equipment Operator 22.00

23460 - Instrument Mechanic 21.71

23465 - Laboratory/Shelter Mechanic 20.69

23470 - Laborer 13.72

23510 - Locksmith 20.74

23530 - Machinery Maintenance Mechanic 22.25

23550 - Machinist, Maintenance 18.62

23580 - Maintenance Trades Helper 13.87

23591 - Metrology Technician I 21.71

23592 - Metrology Technician II 22.62

23593 - Metrology Technician III 23.54

23640 - Millwright 21.71

23710 - Office Appliance Repairer 17.16

23760 - Painter, Maintenance 17.01

23790 - Pipefitter, Maintenance 26.04

23810 - Plumber, Maintenance 23.07

23820 - Pneudraulic Systems Mechanic 21.71

23850 - Rigger 21.71

23870 - Scale Mechanic 19.39

23890 - Sheet-Metal Worker, Maintenance 19.89

23910 - Small Engine Mechanic 17.18

23931 - Telecommunications Mechanic I 24.09

23932 - Telecommunications Mechanic II 25.11

23950 - Telephone Lineman 23.91

23960 - Welder, Combination, Maintenance 15.92

23965 - Well Driller 21.71

23970 - Woodcraft Worker 21.71

23980 - Woodworker 16.93

24000 - Personal Needs Occupations

24550 - Case Manager 13.98

24570 - Child Care Attendant 9.35

24580 - Child Care Center Clerk 13.26

24610 - Chore Aide 9.71

24620 - Family Readiness And Support Services 13.98

Coordinator

24630 - Homemaker 15.27

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 21.71

25040 - Sewage Plant Operator 17.93

25070 - Stationary Engineer 21.71

25190 - Ventilation Equipment Tender 15.61

25210 - Water Treatment Plant Operator 17.93

27000 - Protective Service Occupations

27004 - Alarm Monitor 15.33

27007 - Baggage Inspector 11.94

27008 - Corrections Officer 18.04

27010 - Court Security Officer 17.21

27030 - Detection Dog Handler 16.84

27040 - Detention Officer 18.04

27070 - Firefighter 17.21

27101 - Guard I 11.94

27102 - Guard II 16.84

27131 - Police Officer I 18.60

27132 - Police Officer II 20.68

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 13.06

28042 - Carnival Equipment Repairer 14.12

28043 - Carnival Worker 9.68

28210 - Gate Attendant/Gate Tender 13.14

28310 - Lifeguard 10.83

28350 - Park Attendant (Aide) 14.70

28510 - Recreation Aide/Health Facility Attendant 10.73

28515 - Recreation Specialist 18.21

28630 - Sports Official 11.71

28690 - Swimming Pool Operator 17.18

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 19.63

29020 - Hatch Tender 19.63

29030 - Line Handler 19.63

29041 - Stevedore I 18.35

29042 - Stevedore II 20.77

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 37.70

30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.99

30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 28.62

30021 - Archeological Technician I 16.03

30022 - Archeological Technician II 18.51

30023 - Archeological Technician III 22.93

30030 - Cartographic Technician 22.93

30040 - Civil Engineering Technician 21.41

30051 - Cryogenic Technician I 24.61

30052 - Cryogenic Technician II 27.17

30061 - Drafter/CAD Operator I 16.03

30062 - Drafter/CAD Operator II 18.51

30063 - Drafter/CAD Operator III 20.64

30064 - Drafter/CAD Operator IV 25.40

30081 - Engineering Technician I 13.62

30082 - Engineering Technician II 15.82

30083 - Engineering Technician III 20.33

30084 - Engineering Technician IV 25.19

30085 - Engineering Technician V 30.82

30086 - Engineering Technician VI 37.29

30090 - Environmental Technician 22.93

30095 - Evidence Control Specialist 22.22

30210 - Laboratory Technician 22.70

30221 - Latent Fingerprint Technician I 24.61

30222 - Latent Fingerprint Technician II 27.17

30240 - Mathematical Technician 22.93

30361 - Paralegal/Legal Assistant I 16.80

30362 - Paralegal/Legal Assistant II 20.81

30363 - Paralegal/Legal Assistant III 25.45

30364 - Paralegal/Legal Assistant IV 30.79

30375 - Petroleum Supply Specialist 27.17

30390 - Photo-Optics Technician 22.93

30395 - Radiation Control Technician 27.17

30461 - Technical Writer I 22.22

30462 - Technical Writer II 27.17

30463 - Technical Writer III 32.88

30491 - Unexploded Ordnance (UXO) Technician I 23.95

30492 - Unexploded Ordnance (UXO) Technician II 28.98

30493 - Unexploded Ordnance (UXO) Technician III 34.74

30494 - Unexploded (UXO) Safety Escort 23.95

30495 - Unexploded (UXO) Sweep Personnel 23.95

30501 - Weather Forecaster I 24.61

30502 - Weather Forecaster II 29.93

30620 - Weather Observer, Combined Upper Air Or (see 2) 20.64

Surface Programs

30621 - Weather Observer, Senior (see 2) 22.22

31000 - Transportation/Mobile Equipment Operation Occupations

31010 - Airplane Pilot 28.98

31020 - Bus Aide 12.10

31030 - Bus Driver 16.53

31043 - Driver Courier 14.29

31260 - Parking and Lot Attendant 10.99

31290 - Shuttle Bus Driver 15.41

31310 - Taxi Driver 10.46

31361 - Truckdriver, Light 15.41

31362 - Truckdriver, Medium 16.89

31363 - Truckdriver, Heavy 20.23

31364 - Truckdriver, Tractor-Trailer 20.23

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist 14.13

99030 - Cashier 9.09

99050 - Desk Clerk 9.25

99095 - Embalmer 24.29

99130 - Flight Follower 23.95

99251 - Laboratory Animal Caretaker I 10.30

99252 - Laboratory Animal Caretaker II 11.10

99260 - Marketing Analyst 19.99

99310 - Mortician 24.29

99410 - Pest Controller 14.11

99510 - Photofinishing Worker 12.59

99710 - Recycling Laborer 13.49

99711 - Recycling Specialist 16.38

99730 - Refuse Collector 12.22

99810 - Sales Clerk 12.63

99820 - School Crossing Guard 14.18

99830 - Survey Party Chief 16.31

99831 - Surveying Aide 9.44

99832 - Surveying Technician 15.62

99840 - Vending Machine Attendant 12.53

99841 - Vending Machine Repairer 15.99

99842 - Vending Machine Repairer Helper 13.27

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal

Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.41 per hour or $176.40 per week or $764.40 per month

HEALTH & WELFARE EO 13706: $4.13 per hour, or $165.20 per week, or $715.87 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal

Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther

King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September…