Am-0007_W9128F-19-R-0002.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

Amendment No. 0007 W9128F

TACTICAL EQUIPMENT MAINTENANCE FACILITY, PN 77301 (FY19), FORT CARSON, COLORADO

See attached documentation for content of the amendment revisions to solicitation

Date for receipt of proposals is 30 MAY 2019 at 1400 hours

Government Point of Contact: Bill Rawe, Contract Specialist (402) 996-3722

U.S.ARMY CORPS OF ENGINEERS, OMAHA

Rocky Mountain Area Office Attn: CONTRACTING DIVISION (CENWO-CT-M) 5475 Tech Center Drive, Suite 205 Colorado Springs, CO 80919

See Item 6

W9128F-19-R-0002

05/13/2019

04/03/2019

05/13/2019

Am #0007 - 1

Am #0007 - 2 (Continuation SF 30)

13 May 2019 Solicitation No. W9128F 19 R 0002

Date of Issue: 3 APR 2019 Date of Receiving Proposals: 30 MAY 2019

SUBJECT: Amendment No. 0007 to Request for Proposal Solicitation Package for Construction of TACTICAL EQUIPMENT MAINTENANCE FACILITY.

TO: Prospective Offerors and Others Concerned

1. The specifications and drawings for subject project are hereby modified as follows (revise all specification indices, attachment lists, and drawing indices accordingly).

a. Specifications. (Descriptive Changes.)

(1) Section 00 21 00, pages 17-18, delete paragraph 1.23

“SUBCONTRACTING PLAN/SUBCONTRACTING GOALS REGARDING THE

UTILIZATION OF SMALL BUSINESS CONCERNS”, item b. in its entirety and replace with the following:

“ b. Federal Acquisition Regulations (FAR). Attention is directed to the following FAR and DFARS clauses contained in this solicitation:

52.219-8, Utilization of Small Business Concerns (OCT 2018)

52.219-9, Small Business Subcontracting Plan (AUG 2018) DEVIATION 2018-O0018)

52.219-16, Liquidated Damages - Subcontracting Plan

252.226-7001, Utilization Of Indian Organizations, Indian-Owned Economic Enterprises, And Native Hawaiian Small Business Concerns, (APR 2019) (See section 00 22 00, 6.5.2.1 for the 15 elements required in the Subcontracting Plan)”

(2) Section 01 30 00.24, page 13, delete paragraph 1.18.2 “Overtime Work by Base Operating and Maintenance (O&M) Personnel” and replace with the following:

“1.18.2 Not Used’’

(3) Section 01 30 00.24 Attachments, delete General Wage Rate Decision Number CO190002 in its entirety and substitute General Wage Rate Decision Number CO190002 dated 05/10/2019. General Wage Rate Decision Number CO190002 dated 05/10/2019 is included as an attachment to this Amendment.

(4) Section 01 30 00.24 Attachments, delete General Wage Rate Decision Number CO190008 in its entirety and substitute General Wage Rate Decision Number CO190008 dated 05/10/2019. General Wage Rate Decision Number CO190008 dated 05/10/2019 is included as an attachment to this Amendment.

(5) Section 01 30 00.24 Attachments, delete General Wage Rate Decision Number CO190022 in its entirety and substitute General

Am #0007 - 3

Wage Rate Decision Number CO190022 dated 05/10/2019. General Wage Rate Decision Number CO190022 dated 05/10/2019 is included as an attachment to this Amendment.

(6) Section 01 91 00.15, page 20, paragraph 3.1.6.5.4 “Aborted Tests and Re-Testing”, delete second sentence “Reimburse the Government...commissioning team members.”

(7) Section 10 21 13, page 8, delete paragraph 2.4 “CEILING- HUNG PARTITIONS”, and replace with the following:

“2.4 NOT USED’’

(8) Section 10 21 13, page 8, delete paragraph 2.5 “FLOOR- ANCHORED PARTITIONS”, and replace with the following:

“2.5 NOT USED’’

(9) Section 27 10 00, page 14, paragraph 2.3.1.1 “Backbone Copper”, in the first sentence delete “200-pair” and replace with “50-pair” as follows:

“Copper backbone cable shall be solid conductor, 24 AWG, 100 ohm, 50-pair, Category 3, UTP, in accordance with ICEA S-90-661, TIA- 568-C.1, TIA-568-C.2 and UL 444, formed into 25 pair binder groups covered with a gray thermoplastic jacket and overall metallic shield.’’

(10) Section 27 10 00, page 14, paragraph 2.3.1.2 “Backbone Optical Fiber”, in the second sentence delete “24” and replace with “12” as follows:

“Provide the number of strands indicated, (but not less than 12 strands between the main telecommunication room and each of the other telecommunication rooms), of single-mode(OS1), tight buffered fiber optic cable.’’

b. Specifications (New and/or Revised and Reissued). Delete and substitute or add specification pages or sections as noted below. The substituted pages or sections are revised and reissued with this amendment. For convenience, on the revised specification pages, changes have been identified with highlighting, all portions of the revised specification pages apply regardless of whether changes are shown with highlighting.

Pages or Sections Deleted Pages or Sections Substituted or Added 00 72 00 00 72 00 01 91 00.15 Appendix B – Basis 01 91 00.15 Appendix B – Basis of Design of Design 10 28 13 10 28 13 22 00 00 22 00 00

c. Drawings (Reissued). The following drawings are revised with latest revision date as shown in the drawing border, and reissued with this amendment.

Volume 1 of 4 – Site Facilities Package:

(1) Sheet GI101, LOCATION PLAN

(2) Sheet ES105, ELECTRICAL SITE PLAN AREA 5

Am #0007 - 4

(3) Sheet ES105A, ELECTRICAL SITE PLAN AREA 5 OPTIONS

(4) Sheet ES106, ELECTRICAL SITE PLAN AREA 6

(5) Sheet ES106A, ELECTRICAL SITE PLAN AREA 6 OPTIONS

(6) Sheet ES107, ELECTRICAL SITE PLAN AREA 7

(7) Sheet ES107A, ELECTRICAL SITE PLAN AREA 7 OPTIONS

(8) Sheet ES109, ELECTRICAL SITE PLAN AREA 9

(9) Sheet ES109A, ELECTRICAL SITE PLAN AREA 9 OPTION

(10) Sheet ES110, ELECTRICAL SITE PLAN AREA 10

(11) Sheet ES110A, ELECTRICAL SITE PLAN AREA 10 OPTIONS

(12) Sheet ES114, ELECTRICAL SITE PLAN AREA 14

(13) Sheet ES116, ELECTRICAL SITE PLAN AREA 16

(14) Sheet ES116A, ELECTRICAL SITE PLAN AREA 16 OPTIONS

(15) Sheet ES117, ELECTRICAL SITE PLAN AREA 17

(16) Sheet ES117A, ELECTRICAL SITE PLAN AREA 17 OPTION

(17) Sheet ES508, ELECTRICAL SITE DETAILS COMMUNICATIONS OSP

DIAGRAM

Volume 2 of 4 – Building Package – CAB TEMF North:

(1) Sheet A-121, COMPOSITE SECOND FLOOR PLAN

(2) Sheet A-320, WALL TYPES

(3) Sheet A-402, ENLARGED STAIR SECTIONS

(4) Sheet A-403, ENLARGED STAIR SECTIONS

(5) Sheet A-404, ENLARGED STAIR SECTIONS

(6) Sheet A-405, ENLARGED STAIR SECTIONS

(7) Sheet A-407, ENLARGED ELEVATOR PLANS

(8) Sheet A-408, ENLARGED ELEVATOR DETAILS

(9) Sheet A-409, ENLARGED TOILET PLAN & ELEVATIONS

(10) Sheet A-410, ENLARGED TOILET PLAN & ELEVATIONS

(11) Sheet A-411, TYPICAL MOUNTING HEIGHTS

(12) Sheet A-417, ENLARGED AWNING PLAN

Am #0007 - 5

(13) Sheet A-420, INTERIOR ELEVATIONS & CASEWORK SECTIONS

(14) Sheet A-510, ROOF DETAILS

(15) Sheet A-511, ROOF DETAILS

(16) Sheet A-512, ROOF DETAILS

(17) Sheet A-601, ROOM FINISH SCHEDULE

(18) Sheet A-603, DOOR SCHEDULE AND DETAILS

(19) Sheet A-604, DOOR DETAILS

(20) Sheet A-605, DOOR DETAILS

(21) Sheet A-620, WINDOW & LOUVER DETAILS

(22) Sheet A-701, MISC. DETAILS

(23) Sheet A-702, MISC. DETAILS

(24) Sheet A-801, AIR BARRIER TESTING BOUNDARY

(25) Sheet A-802, AIR BARRIER TESTING BOUNDARY

(26) Sheet A-803, AIR BARRIER TESTING BOUNDARY

(27) Sheet I-121, COMPOSITE SECOND FLOOR FURNITURE PLAN

(28) Sheet F-121, SECOND FLOOR LIFE SAFETY PLAN

(29) Sheet FA105, SECOND FLOOR FIRE ALARM PLAN

(30) Sheet FX121, SECOND FLOOR FIRE SUPPRESSION PLAN

(31) Sheet P-101, COMPOSITE FIRST FLOOR PLUMBING PLAN

(32) Sheet P-103, FIRST FLOOR PLUMBING PLAN – AREA “B”

(33) Sheet P-121, COMPOSITE SECOND FLOOR PLUMBING PLAN

(34) Sheet P-401, ENLARGED FIRST FLOOR WASTE & VENT PLAN

(35) Sheet P-402, ENLARGED FIRST FLOOR DOMESTIC WATER PLAN

(36) Sheet P-601, PLUMBING SCHEDULES

(37) Sheet M-105, SECOND FLOOR PLAN

(38) Sheet M-109, SECOND FLOOR PIPING PLAN

(39) Sheet EG105, SECOND FLOOR GROUNDING PLAN

(40) Sheet EG502, GROUNDING DETAILS

(41) Sheet EL105, SECOND FLOOR LIGHTING PLAN

Am #0007 - 6

(42) Sheet EP104, FIRST FLOOR POWER PLAN – AREA “C”

(43) Sheet EP105, SECOND FLOOR POWER PLAN

(44) Sheet EP603, PANEL SCHEDULES

(45) Sheet EP604, PANEL SCHEDULES

(46) Sheet EP606, MECHANICAL EQUIPMENT – ELECTRICAL CONNECTION

SCHEDULE

(47) Sheet EY104, SECOND FLOOR SECURITY PLAN

(48) Sheet TN105, SECOND FLOOR TELECOMMUNICATIONS PLAN

(49) Sheet TN502, TELECOMMUNICATIONS DETAILS

Volume 3 of 4 – Building Package – CAB TEMF South:

(1) Sheet A-121, COMPOSITE SECOND FLOOR PLAN

(2) Sheet A-320, WALL TYPES

(3) Sheet A-402, ENLARGED STAIR SECTIONS

(4) Sheet A-403, ENLARGED STAIR SECTIONS

(5) Sheet A-404, ENLARGED STAIR SECTIONS

(6) Sheet A-405, ENLARGED STAIR SECTIONS

(7) Sheet A-407, ENLARGED ELEVATOR PLANS

(8) Sheet A-408, ENLARGED ELEVATOR DETAILS

(9) Sheet A-409, ENLARGED TOILET PLAN & ELEVATIONS

(10) Sheet A-410, ENLARGED TOILET PLAN & ELEVATIONS

(11) Sheet A-411, TYPICAL MOUNTING HEIGHTS

(12) Sheet A-417, ENLARGED AWNING PLAN

(13) Sheet A-420, INTERIOR ELEVATIONS & CASEWORK SECTIONS

(14) Sheet A-510, ROOF DETAILS

(15) Sheet A-511, ROOF DETAILS

(16) Sheet A-512, ROOF DETAILS

(17) Sheet A-601, ROOM FINISH SCHEDULE

(18) Sheet A-603, DOOR SCHEDULE AND DETAILS

(19) Sheet A-604, DOOR DETAILS

Am #0007 - 7

(20) Sheet A-605, DOOR DETAILS

(21) Sheet A-620, WINDOW & LOUVER DETAILS

(22) Sheet A-701, MISC. DETAILS

(23) Sheet A-702, MISC. DETAILS

(24) Sheet A-801, AIR BARRIER TESTING BOUNDARY

(25) Sheet A-802, AIR BARRIER TESTING BOUNDARY

(26) Sheet A-803, AIR BARRIER TESTING BOUNDARY

(27) Sheet I-121, COMPOSITE SECOND FLOOR FURNITURE PLAN

(28) Sheet F-121, SECOND FLOOR LIFE SAFETY PLAN

(29) Sheet FA105, SECOND FLOOR FIRE ALARM PLAN

(30) Sheet FX121, SECOND FLOOR FIRE SUPPRESSION PLAN

(31) Sheet P-101, COMPOSITE FIRST FLOOR PLUMBING PLAN

(32) Sheet P-103, FIRST FLOOR PLUMBING PLAN – AREA “B”

(33) Sheet P-121, COMPOSITE SECOND FLOOR PLUMBING PLAN

(34) Sheet P-401, ENLARGED FIRST FLOOR WASTE & VENT PLAN

(35) Sheet P-402, ENLARGED FIRST FLOOR DOMESTIC WATER PLAN

(36) Sheet P-601, PLUMBING SCHEDULES

(37) Sheet M-105, SECOND FLOOR PLAN

(38) Sheet M-109, SECOND FLOOR PIPING PLAN

(39) Sheet EG105, SECOND FLOOR GROUNDING PLAN

(40) Sheet EG502, GROUNDING DETAILS

(41) Sheet EL105, SECOND FLOOR LIGHTING PLAN

(42) Sheet EP104, FIRST FLOOR POWER PLAN – AREA “C”

(43) Sheet EP105, SECOND FLOOR POWER PLAN

(44) Sheet EP603, PANEL SCHEDULES

(45) Sheet EP604, PANEL SCHEDULES

(46) Sheet EP606, MECHANICAL EQUIPMENT – ELECTRICAL CONNECTION

SCHEDULE

(47) Sheet EY104, SECOND FLOOR SECURITY PLAN

Am #0007 - 8

(48) Sheet TN105, SECOND FLOOR TELECOMMUNICATIONS PLAN

(49) Sheet TN502, TELECOMMUNICATIONS DETAILS

Volume 4 of 4 – Building Package – Support Facilities:

(1) Sheet A-202UV, BUILDING ELEVATIONS & SECTIONS

(2) Sheet A-501, FOUNDATION DETAILS

(3) Sheet A-510, ROOF DETAILS

(4) Sheet A-601, ROOM FINISH & DOOR SCHEDULE

(5) Sheet A-604, DOOR & LOUVER DETAILS

(6) Sheet A-701, MISC. DETAILS

(7) Sheet E-512, TELECOMMUNICATIONS DETAILS

2. This amendment is a part of the proposing papers and its receipt shall be acknowledged. All other conditions and requirements of the request for proposal remain unchanged.

3. Electronic Proposals. Provide proposals via the instructions provided in Section 00 22 00 of the Request for Proposal.

4. Offers will be received until 2:00 p.m., local time at place of receiving proposals, 30 MAY 2019.

Attachments:

General Wage Rate Decisions CO190002 dated 05/10/2019 CO190008 dated 05/10/2019 CO190022 dated 05/10/2019 Specification Pages listed in 1.b., above Drawings listed in 1.c., above (provided under separate cover)

U.S. Army Corps of Engineers, Omaha District 1616 Capitol Avenue Omaha, Nebraska 68102-4901

13 MAY 2019

nep/2160

Am #0007 CO190002 - 1 05/10/2019

General Decision Number: CO190002 05/10/2019 CO2

Superseded General Decision Number: CO20180012

State: Colorado

Construction Type: Heavy

Counties: Adams, Arapahoe, Boulder, Broomfield, Denver, Douglas, El Paso, Jefferson, Larimer, Mesa, Pueblo and Weld Counties in Colorado.

HEAVY CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2019. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/04/2019 1 02/01/2019 2 02/22/2019 3 04/12/2019 4 05/10/2019

Am #0007 CO190002 - 2 05/10/2019

ASBE0028-001 07/01/2018

Rates Fringes

Asbestos Workers/Insulator (Includes application of all insulating materials, protective coverings, coatings and finishings to all types of mechanical systems)....................$ 31.73 14.23

BRCO0007-004 01/01/2019

ADAMS, ARAPAHOE, BOULDER, BROOMFIELD, DENVER, DOUGLAS,

JEFFERSON AND WELD COUNTIES

BRICKLAYER.......................$ 29.52 10.48

BRCO0007-006 05/01/2018

EL PASO AND PUEBLO COUNTIES

Rates Fringes

BRICKLAYER.......................$ 25.88 10.34

ELEC0012-004 09/01/2018

PUEBLO COUNTY

Rates Fringes

ELECTRICIAN

Electrical contract over $1,000,000..................$ 27.70 12.30+3% Electrical contract under $1,000,000..................$ 24.85 12.30+3%

ELEC0068-001 06/01/2018

JEFFERSON, LARIMER, AND WELD COUNTIES

ELECTRICIAN......................$ 35.80 15.45

ELEC0111-001 03/01/2019

Am #0007 CO190002 - 3 05/10/2019

Line Construction:

Groundman...................$ 20.41 13.75%+$6.20 Line Equipment Operator.....$ 28.98 13.75%+$6.20 Lineman and Welder..........$ 44.92 25.25%+$5.75

ELEC0113-002 06/01/2018

EL PASO COUNTY

Rates Fringes

ELECTRICIAN......................$ 31.80 15.90

ELEC0969-002 01/01/2019

MESA COUNTY

Rates Fringes

ELECTRICIAN......................$ 24.80 9.84

* ENGI0009-001 05/01/2018

Rates Fringes

Power equipment operators:

Blade: Finish...............$ 28.57 10.70 Blade: Rough................$ 28.25 10.70 Bulldozer...................$ 28.25 10.70 Cranes: 50 tons and under..$ 28.40 10.70 Cranes: 51 to 90 tons......$ 28.57 10.70 Cranes: 91 to 140 tons.....$ 29.55 10.70 Cranes: 141 tons and over...$ 31.07 10.70 Forklift....................$ 27.87 10.70 Mechanic....................$ 28.73 10.70 Oiler.......................$ 27.49 10.70 Scraper: Single bowl under 40 cubic yards........$ 28.40 10.70 Scraper: Single bowl, including pups 40 cubic yards and over and tandem bowls.......................$ 28.57 10.70 Trackhoe....................$ 28.40 10.70

IRON0024-003 01/01/2019

Rates Fringes

Ironworkers:.....................$ 29.85 21.76 Structural

LABO0086-001 05/01/2009

Am #0007 CO190002 - 4 05/10/2019

Laborers:

Pipelayer...................$ 18.68 6.78

PLUM0003-005 06/01/2017

JEFFERSON, LARIMER AND WELD COUNTIES

PLUMBER..........................$ 39.08 16.44

PLUM0058-002 07/01/2018

EL PASO COUNTY

Rates Fringes

Plumbers and Pipefitters.........$ 32.75 14.85

PLUM0058-008 07/01/2018

PUEBLO COUNTY

Rates Fringes

Plumbers and Pipefitters.........$ 32.75 14.85

PLUM0145-002 07/01/2016

MESA COUNTY

Rates Fringes

Plumbers and Pipefitters.........$ 35.17 11.70

PLUM0208-004 06/01/2016

JEFFERSON, LARIMER AND WELD COUNTIES

PIPEFITTER.......................$ 37.10 16.62

SHEE0009-002 07/01/2018

Am #0007 CO190002 - 5 05/10/2019

Sheet metal worker...............$ 34.02 17.49

TEAM0455-002 07/01/2018

Rates Fringes

Truck drivers:

Pickup......................$ 21.41 4.32 Tandem/Semi and Water.......$ 22.04 4.32

SUCO2001-006 12/20/2001

Rates Fringes

BOILERMAKER......................$ 17.60

Carpenters:

Form Building and Setting...$ 16.97 2.74 All Other Work..............$ 15.14 3.37

Cement Mason/Concrete Finisher...$ 17.31 2.85

IRONWORKER, REINFORCING..........$ 18.83 3.90

Laborers:

Common......................$ 11.22 2.92 Flagger.....................$ 8.91 3.80 Landscape...................$ 12.56 3.21

Painters:

Brush, Roller & Spray.......$ 15.81 3.26

Power equipment operators:

Backhoe.....................$ 16.36 2.48 Front End Loader............$ 17.24 3.23 Skid Loader.................$ 15.37 4.41

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other

Am #0007 CO190002 - 6 05/10/2019 health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates

Am #0007 CO190002 - 7 05/10/2019 the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Am #0007 CO190002 - 8 05/10/2019

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION

Am #0007 CO190008 - 1 05/10/2019

General Decision Number: CO190008 05/10/2019 CO8

Superseded General Decision Number: CO20180018

State: Colorado

Construction Type: Highway

Counties: El Paso, Pueblo and Teller Counties in Colorado.

HIGHWAY CONSTRUCTION PROJECTS

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2019. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor

1 05/10/2019

Am #0007 CO190008 - 2 05/10/2019

ELEC0012-009 10/01/2017

PUEBLO COUNTY

Rates Fringes

ELECTRICIAN......................$ 28.15 12.04

ELEC0113-009 06/01/2018

EL PASO AND TELLER COUNTIES

Rates Fringes

ELECTRICIAN......................$ 31.80 15.90

* ENGI0009-009 05/01/2018

Rates Fringes

POWER EQUIPMENT OPERATOR:

(3)-Drill Rig Caisson (smaller than Watson 2500 and similar)................$ 28.25 10.70 (4)-Crane (50 tons and under)......................$ 28.40 10.70 (5)-Drill Rig Caisson (Watson 2500 similar or larger), Crane (51-90 tons).$ 28.57 10.70 (6)-Crane (91-140 tons).....$ 29.55 10.70

SUCO2011-003 09/15/2011

Rates Fringes

CARPENTER

Excludes Form Work..........$ 24.15 6.25 Form Work Only El Paso, Teller............$ 19.06 5.84 Pueblo.....................$ 19.00 5.88

CEMENT MASON/CONCRETE FINISHER

El Paso, Teller.............$ 17.36 3.00 Pueblo......................$ 17.74 3.00

FENCE ERECTOR....................$ 13.02 3.20

GUARDRAIL INSTALLER..............$ 12.89 3.20

HIGHWAY/PARKING LOT

STRIPING:Painter.................$ 12.62 3.21

IRONWORKER, REINFORCING

(Excludes Guardrail

Am #0007 CO190008 - 3 05/10/2019

Installation) El Paso, Teller.............$ 20.49 1.65 Pueblo......................$ 16.69 5.45

IRONWORKER, STRUCTURAL

(Excludes Guardrail Installation)....................$ 18.22 6.01

LABORER

Asphalt Raker...............$ 17.54 3.16 Asphalt Shoveler............$ 21.21 4.25 Asphalt Spreader............$ 18.58 4.65 Common or General El Paso....................$ 17.05 3.69 Pueblo.....................$ 16.29 4.25 Teller.....................$ 16.88 3.61 Concrete Saw (Hand Held)....$ 16.29 6.14 Landscape and Irrigation....$ 12.26 3.16 Mason Tender- Cement/Concrete.............$ 16.29 4.25 Pipelayer...................$ 18.72 3.24 Traffic Control (Flagger)...$ 9.55 3.05 Traffic Control (Sets Up/Moves Barrels, Cones, Install Signs, Arrow Boards and Place Stationary Flags)(Excludes Flaggers)...................$ 12.43 3.22

PAINTER (Spray Only).............$ 16.99 2.87

POWER EQUIPMENT OPERATOR:

Asphalt Laydown.............$ 22.67 8.72 Asphalt Paver...............$ 21.50 3.50 Asphalt Roller El Paso....................$ 24.42 6.96 Pueblo.....................$ 23.67 9.22 Teller.....................$ 24.42 6.96 Asphalt Spreader............$ 22.67 8.72 Backhoe/Trackhoe El Paso....................$ 23.31 5.61 Pueblo.....................$ 21.82 8.22 Teller.....................$ 23.32 5.50 Bobcat/Skid Loader..........$ 15.37 4.28 Boom........................$ 22.67 8.72 Broom/Sweeper El Paso, Teller............$ 23.43 8.04 Pueblo.....................$ 23.47 9.22 Bulldozer El Paso....................$ 26.56 7.40 Pueblo, Teller.............$ 26.11 6.92 Drill.......................$ 17.59 3.45 Forklift....................$ 15.91 4.68 Grader/Blade

Am #0007 CO190008 - 4 05/10/2019

El Paso....................$ 22.83 8.72 Pueblo.....................$ 23.25 6.98 Teller.....................$ 23.22 8.72 Guardrail/Post Driver.......$ 16.07 4.41 Loader (Front End) El Paso....................$ 23.61 7.79 Pueblo.....................$ 21.67 8.22 Teller.....................$ 23.50 7.64 Mechanic El Paso....................$ 22.35 6.36 Pueblo.....................$ 24.02 8.43 Teller.....................$ 22.16 6.17 Oiler El Paso....................$ 23.29 7.48 Pueblo.....................$ 23.13 7.01 Teller.....................$ 22.68 7.11 Roller/Compactor (Dirt and Grade Compaction) El Paso....................$ 16.70 3.30 Pueblo,Teller..............$ 18.43 4.62 Rotomill....................$ 16.22 4.41 Scraper.....................$ 24.28 4.83 Screed El Paso, Teller............$ 25.22 5.74 Pueblo.....................$ 23.67 9.22 Tractor.....................$ 13.13 2.95

TRUCK DRIVER

Distributor El Paso, Teller............$ 17.98 3.97 Pueblo.....................$ 18.35 3.85 Dump Truck El Paso, Teller............$ 16.85 4.83 Pueblo.....................$ 16.87 4.79 Lowboy Truck................$ 17.25 5.27 Mechanic....................$ 26.69 3.50 Multi-Purpose Specialty & Hoisting Truck..............$ 17.27 3.71 Pickup and Pilot Car........$ 13.93 3.68 Semi/Trailer Truck..........$ 16.00 2.60 Truck Mounted Attenuator....$ 12.43 3.22 Water Truck El Paso....................$ 17.24 4.15 Pueblo.....................$ 20.93 4.98 Teller.....................$ 17.31 4.07

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the

Am #0007 CO190008 - 5 05/10/2019

Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Am #0007 CO190008 - 6 05/10/2019

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

Am #0007 CO190008 - 7 05/10/2019

Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

This page was intentionally left blank for duplex printing.

Am #0007 CO190022 - 1 05/10/2019

General Decision Number: CO190022 05/10/2019 CO22

Superseded General Decision Number: CO20180032

State: Colorado

Construction Type: Building

County: El Paso County in Colorado.

BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2019. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor

1 02/01/2019 2 02/22/2019 3 05/10/2019

Am #0007 CO190022 - 2 05/10/2019

ASBE0028-002 07/01/2018

ASBESTOS WORKER/HEAT & FROST

INSULATOR - MECHANICAL (Duct, Pipe & Mechanical System Insulation)......................$ 31.73 14.23

ELEC0113-005 06/01/2018

Rates Fringes

ELECTRICIAN (Includes Low Voltage Wiring)..................$ 31.80 15.90

ELEV0025-001 01/01/2019

Rates Fringes

ELEVATOR MECHANIC................$ 45.05 34.125

FOOTNOTE:

a.Vacation: 6%/under 5 years based on regular hourly rate for all hours worked. 8%/over 5 years based on regular hourly rate for all hours worked.

b. PAID HOLIDAYS: New Year's Day; Memorial Day; Independence Day; Labor Day; Veterans' Day; Thanksgiving Day; the Friday after Thanksgiving Day; and Christmas Day.

* ENGI0009-017 05/01/2018

Rates Fringes

POWER EQUIPMENT OPERATOR

(Crane) 141 tons and over...........$ 31.07 10.70 50 tons and under...........$ 28.40 10.70 51 to 90 tons...............$ 28.57 10.70 91 to 140 tons..............$ 29.55 10.70

IRON0024-009 01/01/2019

Rates Fringes

IRONWORKER, ORNAMENTAL...........$ 29.85 11.42

IRON0024-011 01/01/2019

Rates Fringes

IRONWORKER, STRUCTURAL...........$ 29.85 11.42

Am #0007 CO190022 - 3 05/10/2019

PAIN0079-009 08/01/2017

PAINTER (Spray)..................$ 20.50 8.41

PLAS0577-002 05/01/2018

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 27.13 12.10

PLUM0058-003 07/01/2018

Rates Fringes

PLUMBER (Excludes HVAC Duct, Pipe and Unit Installation)......$ 32.75 14.85

PLUM0058-004 07/01/2018

Rates Fringes

PIPEFITTER, Includes HVAC Pipe Installation (Excludes HVAC Duct and Unit Installation)....................$ 32.75 14.85

SFCO0669-002 04/01/2017

Rates Fringes

SPRINKLER FITTER (Fire Sprinklers)......................$ 36.73 20.47

SHEE0009-005 07/01/2018

Rates Fringes

SHEET METAL WORKER (Excludes HVAC Duct, Pipe and Unit Installation)....................$ 34.02 17.49

SUCO2013-008 07/31/2015

Rates Fringes

BRICKLAYER.......................$ 21.96 0.00

CARPENTER........................$ 22.63 6.98

LABORER: Common or General......$ 13.40 1.40

LABORER: Mason Tender - Brick...$ 15.99 0.00

Am #0007 CO190022 - 4 05/10/2019

LABORER: Mason Tender - Cement/Concrete..................$ 16.00 0.00

LABORER: Pipelayer..............$ 16.96 3.68

OPERATOR:

Backhoe/Excavator/Trackhoe.......$ 20.26 8.62

OPERATOR: Bobcat/Skid Steer/Skid Loader................$ 18.58 2.42

OPERATOR: Grader/Blade..........$ 21.50 0.00

PAINTER (Brush and Roller).......$ 17.20 0.00

ROOFER...........................$ 16.71 0.00

SHEET METAL WORKER (HVAC Duct Installation Only)...............$ 25.18 6.30

SHEET METAL WORKER (HVAC Unit Installation Only)...............$ 24.00 2.18

TRUCK DRIVER: Dump Truck........$ 17.34 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after

Am #0007 CO190022 - 5 05/10/2019 cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of "identifiers" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than "SU" or "UAVG" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the "SU" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Am #0007 CO190022 - 6 05/10/2019

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Am #0007 CO190022 - 7 05/10/2019

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

This page was intentionally left blank for duplex printing.

Tactical Equipment Maintenance Facility (FY19) - Fort Carson, CO FCCI

SECTION TABLE OF CONTENTS

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

SECTION 00 72 00

GENERAL CONDITIONS (CONTRACT CLAUSES - RFP)

08/18

PART 1 GENERAL

1.1 *FAR 52.202-1 DEFINITIONS (NOV 2013)

1.2 *FAR 52.203-3 GRATUITIES (APR 1984)

1.3 *FAR 52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

1.4 *FAR 52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE

GOVERNMENT (SEP 2006)

1.5 *FAR 52.203-7 ANTI-KICKBACK PROCEDURES (MAY 2014)

1.6 *FAR 52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS

FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

1.7 *FAR 52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER

ACTIVITY (MAY 2014)

1.8 *FAR 52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN

FEDERAL TRANSACTIONS (OCT 2010)

1.9 *FAR 52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT

(OCT 2015)

1.10 *FAR 52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND

REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (APR 2014)

1.11 *FAR 52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL

CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

1.12 *FAR 52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON POSTCONSUMER

FIBER CONTENT PAPER (MAY 2011)

1.13 FAR 52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR

PERSONNEL (JAN 2011)

1.14 *FAR 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER

SUBCONTRACT AWARDS (OCT 2016)

1.15 *FAR 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT

2016)

1.16 *FAR 52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE

MA…