Attachment_2a_-_Lakeurst_Combined_Cutsheets.pdf

All cutsheets that have highlights or red arrows are indicating the preferred model or features needed for that specific item.

JSN: A1012, A1014, A1015

All 3 JSNs can be this model with different features see below.

A1012: Wall mounted 1 line A1014: Wall mounted 1 line with speakerphone A1015: Desk Top, multiple line section 10 51 13 snap shot sp ecifications v10.09

These are snapshot specifications for quick reference and product selection. Full 3-part specifications with expanded product information are available to download at www.

pencoproducts.com and may include updates as a result of Penco’s continuous product improvement initiatives.

At a Glance…

• General purpose economy storage

• Knocked Down Construction

• 16 ga. doors (18 ga if less than 12” wide)

• Powder Coat Finish

Penco Vanguard Steel Lockers

SNAPSHOT SPECIFICATIONS

1.01 SECTION INCLUDES

Standard Duty Knocked Down Lockers

1.02 REFERENCES

ADAAG - Americans with Disabilities Act, Accessibility Guidelines.

1.03 SUBMITTALS

Submit under provisions of Section 01 33 00. Shop Drawings shall show dimensioned plans, elevations, and sections.

Store products in manufacturer’s unopened packaging until ready for installation to protect the locker finish and adjacent surfaces from damage.

PART 2 – PRODUCTS

2.01 MANUFACTURER

Penco Products, Inc. or approved equal based upon ability to provide product compliant with specifications of the product selected. Provide only metal lockers fabricated in the United States by a single domestic manufacturer.

2.02 MATERIALS

Steel: All Penco standard lockers are constructed using prime grade mild cold-rolled sheet steel free from surface imperfection meeting ASTM A1008 and capable of taking a high-grade enamel powder coat finish. Alternate material: Sheet steel components shall be fabricated using zinc-coated steel meeting ASTM A879 and finished in the same manner. Forged steel coat hooks with balled ends and truss fin head bolts and hex nuts will be zinc coated and supplied for all lockers unless otherwise indicated.

2.03 STANDARD DUTY LOCKERS

Acceptable Product: Penco Vanguard, knock-down lockers. Tops, Bottoms, Backs, Sides, and Shelves fabricated from 24 gauge sheet steel. Locker doors measuring less than 12 inches wide are 18 gauge steel. All others are fabricated from 16 gauge sheet steel. 6 inch legs are standard and can be deleted as a no cost option.

Door Frame: Channel shape, not less than 16 gauge steel. Provide vertical door frame members with additional 3/8 inch (9.5 mm) flange as a continuous door strike. Intermediate cross frame members are standard on double and triple tier lockers.

Multi-Point Latch Doors: One piece sheet steel with full channel formation of adequate depth to fully conceal lock bar on lock side, channel formation on hinge side, right angle formations across top and bottom, with holes for attaching number plates. Doors over 15 inches wide by 60 inches or 72 inches high will include a 3 inch wide 20 gauge full height reinforcing pan welded to inside face of door at 6 inch centers.

Box Lockers: One piece sheet steel with channel formations on lock and hinge sides, right angle flanges on top and bottom; pre-punch doors for padlock latch and friction catch and built-in combination and key locks.

Ventilation: Provide louvered doors in manufacturer’s standard louver pattern.

Hinges: Two inch high, double spun, full loop, tight pin, projection welded to door frame and securely fastened to the door with steel rivets. Provide three 2 inch five-knuckle hinges on doors over 48 inches high and two 2 inch high five-knuckle hinges on all other doors.

Two Person and Duplex Lockers, 1, 2 and 3 Tier featuring multi-point latching: Chrome-plated zinc alloy die-cast case and handle attached to latch bar concealed inside door and tamperproof. Pulling handle out shall move latch bar up and open door in one motion and providing for use of 9/32 inch diameter padlock, integral with handle and located so that extension of handle forms padlock strike. Doors over 48 inches high shall use glass-filled

PART 1 – GENERAL

Knocked-Down Steel Locker Vanguard™ www.pencoproducts.com

BOX LOCKER

SNAPSHOT SPECIFICATIONS (continued) section 10 51 13 nylon clips to engage the door frame and hold the door shut at three points. All other doors engage at two points.

Locking Device: Positive, automatic type, whereby locker may be locked when open, then closed without unlocking. Firmly secure one rubber silencer in frame at each latch hook.

Alternate Handle: Classic III Multi-point latching with recessed handle activated by a 14 gauge fi nger-lift control handle in a 22 gauge drawn and brushed stainless steel pocket fastened to the door with two tabs and a positive tamper-resistant decorative fastener.

Depth shall be suffi cient to prevent a standard combination padlock, built-in combination lock, or key lock from protruding beyond door face. Nylon lift trigger accommodates use of 9/32 inch padlock.

Box Lockers (3 to 6 Tier): Punch doors for use with padlocks or built-in locks and confi gure doors for use with padlocks with an 18 gauge combination door pull, staple, and lock hole cover plate with integral friction catch.

2.05 INTERIOR EQUIPMENT

ADA-Compliant Lockers (Recessed Handles with Multi-Point Latch): Single lockers: Hat shelf 48 inches from locker bottom or lower as required by base condition. Locker Bottom: Minimum of 9 inches off the fl oor, or an extra shelf placed 9 inches off the fl oor for side access or minimum of 15 inches off the fl oor for front access.

2.07 FABRICATION

Fabrication shall be on the unit principle, each locker with individual door and frame, individual top, bottom, back, and shelves, with common intermediate divisions separating compartments.

Finish: High quality powder coat paint fi nish applied in strict adherence to paint manufacturer’s specifi cations to provide optimum appearance and performance.

Finishes releasing VOCs are not acceptable. Standard coating thickness is 1 mil dry fi lm thickness minimum.

Powder Coat Plus option increases thickness to 2 mil minimum. Colors as selected from manufacturer’s standard colors. All locker body components shall match color of door and frame.

Alternative fi nishes: Custom color match, Anti Graffi ti, antimicrobial, TGIC and high performance fi nishes are available.

PART 3 – EXECUTION

3.01 EXAMINATION

Do not begin installation until substrates and bases have been properly prepared. If substrate and bases are the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.02 INSTALLATION

Install metal lockers and accessories at locations shown in accordance with manufacturer’s instructions. Install lockers plumb, level, and square. Anchor lockers to fl oor and wall at intervals recommended by the manufacturer. Bolt adjoining locker units together to provide rigid installation.

3.03 ADJUSTING

Adjust doors and latches to operate without binding. Verify that latches are operating satisfactorily. Adjust built-in locks to prevent binding of dial or key and ensure smooth operation prior to substantial completion.

Touch-up with factory-supplied paint and repair or replace damaged products before substantial completion.

3.04 PROTECTION

Protect installed products until completion of project.

Ventilation Options

Mini Louvers (O)

Visual Perf (O)

Standard Louvers (S)

Full Louvers (O)

S = Standard, O = Optional, SB = Standard on Box Lockers

Classic III Recessed (O)

Friction Catch

(SB)

Die-Cast Vanguard Handle (S)

Door Handle Options

Penco Products, Inc.

2024 Cressman Road, Skippack, PA 19474

PHONE: 800-562-1000 • FAX: 800-248-1555

E-MAIL: general@pencoproducts.com

Get the Full Specifi cations Here www.pencoproducts.com

Log On:

Find:

Select:

COPY & PASTE

Full product-specifi c 3-part specs to your documents!

Visit:

sn ap sh ot s p ec ifi ca tio ns v

.0

Administrator Line m4pmmbjr Highlight

Administrator Line

Administrator Line

Hospital Systems, Inc.

750 Garcia Ave Pittsburg CA

94565 USA

Tel:

+1.925.427.7800

Fax:

+1.925.427.0800

Medical Equipment Rail

Click on picture to enlarge

Click here for an Eclipse Medical Equipment Rail Catalog

Eclipse Medical Equipment Rail Rail with color insert P/N 050469-L Rail with RapidMount channel P/N 050453-L L=length in inches

Wall Mounting Bracket

P/N 048308

Eclipse Equipment Mounting Bracket with a 1/2" (13mm) hole to accommodate equipment with 1/2" pin

P/N 178198

Equipment Mounting Bracket

With two #10-24 tapped holes

P/N 178201

Equipment Mounting Bracket

With two #10-24 tapped holes

P/N 178202

Home

About Us

Contact Us

Products

Catalogs in PDF

Send an E-Mail

EquipmentRail

050469-

048308

178198

Requirement is for rail 36 inches in length.

Requirement is for 4 equipment mounting brackets per rail.

m4pmmbjr Highlight m4pmmbjr Highlight

0�#� 1��2*�"�3� ��( 1���45 *��6"��� ������6"��(�#'���� !"������# $��078��-7�.��94�����24:;<7:�( 1��=��>>&����*''#&�"�=��#���&�$�?�����,� 1��*''#&�"�=�;&"'��"��"�=�8&@*&��� �'�A����&�&B � ����,�C6D�2�9EFEGGH� ����dJbb]Tfk� ����-��,��&�$�r�> �1��& �RJcUW�S�PQ̀a�bc�W]Sc]U�̂]�\cc�\T�S�̂]bŜ�S�cg�WbScc��JJfẐ\Tfv�Î]Sf��Ĵ�cJeSf\JTW�VX]̂]�S�WbScc]̂_�bĴ]�f̂SU\f\JTSc�U\WZ]TW]̂�\W�Ẑ]�]̂̂]Uv�[]c\h]̂W�bĴ]�fXST�P_�aa�XSTUVSWX]W�Z]̂�]̂�\ccv�����- ���r�> �1��& �������&1&#���)� �*��"�����4#" �� �"&�������

Gojo FMX-12

Handwash Soap

Dispenser

FMX-12 Dispenser,, 1250ml Capacity, Dove Gray Catalog Name:

SP Richards Catalog Page #: 1064

Manufacturer: Gojo

Industries, Inc.

JSN: A5095

INFECTION CONTROL CENTER, FREE-STANDING

PETER PEPPER

Model ICF-2M healthFIRST® Freestanding Infection Prevention Center

Image shown for illustrative purposes only and may not match the configured product.

DESCRIPTION

healthFIRST® products promote the use of personal protection products, reducing the risk of cross contamination.

Freestanding Infection Control Centers are perfect for public waiting and reception areas, providing a single enclosure for dispensing sanitizer, masks and tissues with poster area for health related messages.

Design by Joe Ricchio

SPECIFICATIONS

SIZE

24½"w x 63"h x 15"d

WOOD FRAME

3/4"w x 5"d.

CH Cherry LC Light Cherry HO Honey MA Natural Maple MM Mahogany W Walnut

DISPENSER

Steel. Hinged at bottom.

SANITIZER HOUSING

Provides area for customer supplied sanitizer. Steel, same finish as Dispenser Front.

PANELS

Header, lower panel and back panel available in Melamine wood finish or any PPP Color.

MAGAZINE POCKET

14"h x 4"d. Steel, in any PPP Color. Front Retainer: Clear acrylic, 7‐1/2"h. Slides up for easy cleaning.

SPEC + PRICE

PEPPER DELIVERS QUICKER

Select colors/finishes of this product are available to ship within 10 business days via the Pepper Delivers Quicker program.

WOOD FRAME FINISH

Select

DISPENSER FINISH

Select

DISPENSER LOCK

NO

PANEL FINISH

Select

MAGAZINE POCKET COLOR

Select

List Price as Specified

$1,095

Ready to Ship: 4 weeks PDQ finishes ship in 10 business days.

Products » Infection Control » Freestanding + Mobile: Public Spaces » ICF-2M

Page 1 of 2ICF-2M: healthFIRST® Freestanding Infection Prevention Center | Peter Pepper Products...

8/4/2016http://www.peterpepper.com/products/infection-control/public-areas/ICF-2M

BASE

Melamine, graphite finish with adjustable foot glides.

COMPARTMENT DIMENSIONS

Masks: (2) 3‐3/4"w x 8‐1/4"h x 3‐3/4"d.

Tissues: 9‐7/8"w x 16‐1/4"h x 3‐3/4"d.

Sanitizer Housing: 7"w x 18"h x 3‐3/4"d.

NOTE

Interior Dispenser dimensions fits most standard products, not included.

DISPENSER FRONT FINISH

Painted finish: Soft White, Haze, Wheat or Taupe Metallic.

Or, Stainless Steel, 304 ‐ #4 finish (upcharge).

DISPENSER INTERIOR FINISH

Soft White.

CUSTOM SIZES

Custom sizes available. Please submit your requirements.

OPTIONS

IC‐L: Lock for Dispenser.

ICF‐P: Poster Holder. Acrylic. Mounts to top panel. 21"w x 11"h x 3/8"d.

DV487: Magnetic Divider for magazine/literature rack, adjustable. 6‐1/2"h. Finish: same as magazine pocket.

PDQ

Select variations of this product are available to ship in 10 business days via the Pepper Delivers Quicker program.

ESTIMATED SHIP WEIGHT

84 lbs.

FOB

COMPTON, CA.

Page 2 of 2ICF-2M: healthFIRST® Freestanding Infection Prevention Center | Peter Pepper Products...

8/4/2016http://www.peterpepper.com/products/infection-control/public-areas/ICF-2M

[�1�0�\�*����]"��

_fg*�]W h ��1��� �����]"i � \ W� j"��� k1���%"l�"� *i�1��2� Ŵ ��"��� m�n�h ��1��� o ���k�����#�� �

Imperial Fastener Company, Inc. CUBICLE TRACK

Cubicle Curtains Cubicle Tracks

Cubicle Hardware IV Tracks

Bottle Holders Shower Curtains Break-A-Way™

HOME Information Contact Feed Back

All Imperial Cubicle Tracks are shipped complete with carriers

Imperial Fastener Company, Inc. All rights reserved.

http://www.imperialfastener.com/tracks.htm http://www.imperialfastener.com/holders.htm http://www.imperialfastener.com/shower.htm http://www.imperialfastener.com/break.htm http://www.imperialfastener.com/ http://www.imperialfastener.com/info.htm http://www.imperialfastener.com/contact.htm http://www.imperialfastener.com/feedback.htm http://www.imperialfastener.com/cub_track2.htm

Imperial Fastener Company, Inc. --- Cubicle Track --- IFC-98

HOME Information Contact Feed Back

BACK

Imperial Fastener Company, Inc. All rights reserved.

http://www.imperialfastener.com/ http://www.imperialfastener.com/info.htm http://www.imperialfastener.com/contact.htm http://www.imperialfastener.com/feedback.htm

Imperial Fastener Company, Inc. --- Hardware ---

Cubicle Tracks

Cubicle Hardware IV Tracks

Bottle Holders Linen Cart Covers Shower Curtains Break-A-Way™

HOME Information Contact Support Feed Back http://www.imperialfastener.com/tracks.htm http://www.imperialfastener.com/holders.htm http://www.imperialfastener.com/shower.htm http://www.imperialfastener.com/break.htm http://www.imperialfastener.com/ http://www.imperialfastener.com/info.htm http://www.imperialfastener.com/contact.htm http://www.imperialfastener.com/support.htm http://www.imperialfastener.com/feedback.htm

Imperial Fastener Company, Inc. --- Cubicle Curtains Page

Cubicle Tracks

Cubicle Hardware IV Tracks

Bottle Holders Shower Curtains Break-A-Way™

HOME Information Contact Feed Back

Windsor Cloth, our newest 100% Trevira Polyester cubicle fabric.

Economical and attractive! Permanently flame resistant and launderable to 160°F.

Windsor is the best value of all cubicle curtains available and all colors are in-stock for prompt delivery.

Fabrics for all tastes and budgets.

From concept through all stages of budgeting, ordering, and delivery, Imperial serves as your partner in design and execution. We offer quality workmanship at competitive prices, and the largest selection of fabrics, colors, patterns, and textures. Imperial manufactures custom made cubicle curtains fabricated of the finest flame resistant fabrics available. In addition to our own quality cubicle curtain fabrics, we offer curtains made with fabrics manufactured by …ARC-COM, Architex, Carnegie, Coral, Design Resources, Design Tex, Frankel, Interspec, Knoll, Maharam, Momentum, Sina Pearson and others! These fabrics are all specifically designed for cubicle curtains and give you the design flexibility you want along with the technical specifications you need.

http://www.imperialfastener.com/tracks.htm http://www.imperialfastener.com/holders.htm http://www.imperialfastener.com/shower.htm http://www.imperialfastener.com/break.htm http://www.imperialfastener.com/ http://www.imperialfastener.com/info.htm http://www.imperialfastener.com/contact.htm http://www.imperialfastener.com/feedback.htm

Imperial Fastener Company, Inc. --- Cubicle Curtains Page

In addition to our designer line, Imperial inventories large quantities of a number of inexpensive 100% Trevira polyester cubicle fabrics that are always in stock for projects requiring immediate delivery.

Each curtain is meticulously tailored and delivered ready to hang, on time, and within budget, Imperial also manufactures its own line of cubicle track and accessories for all your cubicle curtain needs!

Imperial Fastener Company, Inc. All rights reserved.

�%������"� '())*+,'-.,(+�/.-.,(+01233/.-+4,+5�6(27.-893/:�;�<==>�?@ABCDEF=GH<=GB�I=JKICLMNOP�QMR� STUOVWTMVW� XYR� � �_̂̀âb� cd;e�f�:�;g�f�:h��i:;j� k�l� � �_̂̀n̂b� c�;e�f�:�;g�f�:h��i:;j� �:l� � �� �q;e�f�:�;g�f�:h��i:;j� o�l� � �_̂nâb� �d;e�f�:�;g�f�:h��i:;j� h�l� � �_̂r̂ b̂� o:;e�f�:�;g�f�:h��i:;j�� �dol� � �s�tu�vwuxxyz�u{�|}~��{��|�~����z�����|}~����y��uw�z���y�������{uz����y�z��{���y��u�w��u�z�u{��

�G�D��@�AC=G��C@�@�A���GC@�=AG���D�FJ�=�IDG��DAAJ=<�@�=A�D�G=F=�C�KA@�>�@���@����J�DCJ@���CDCJ@���A==��CD�<J�K�e@ABCDEF=G��@A�GCD�<�DF@�=�D>>FJ�DCJ@�G���F=DG=�A=�=A�ED�B�C@�CI=������G=�CJ@��@��CI=�>AJ�=�FJGC��@A�DFF�<=GBJ�K�D��=GG@AJ=G�D�<�GC@ADK=��=DC�A=G���I=A=�JG�@�=�?JA=��D�DK=�=�C�KA@��=C�DC�=D�I�=�<�@���:;���q;���d;�D�<�o:;�?J<=�?@ABCDEF=G�D�<�D�?JA=�>@AC�J��=D�I�F=K��>AJKIC���@<=GC��>D�=F�J��F�<=<���=KG�DA=���J�=AGDF��F=�C�D�<�AJKIC�1233/.-+4,+5�6(27.-893/ �@A�=A���JCG��D��E=��G=<�DG��A==GCD�<J�K�?@ABCDEF=G�@A�DG�>DAC�@��D�FDAK=A��@��JK�ADCJ@����@��=�CJ�K�EAD�B=J��F�<=<�� A@��=C�JG�>A@�J<=<�DC�A=DA�@����JC���@<=GC��>D�=FG�DA=�GCD�<DA<��¡M\VO\�¢VTYW�£M\�̂_¤�SOO¥�XM\¦WY§YTMVWLMNOP�QMR� STUOVWTMVW� XYR�� TW O_̂̂^̂b� �:;e�f�:�;g�f�:h��i:;j� qol�� �©̈ª ©̈ª©̈ª ©̈ª ©«¬«ª

'(2+32�*+,./

LMNOP�QMR� STUOVWTMVW� � XYR�°̄±²�³�̄́ �̄µ¶±·�³�¶̧±¹�º�®»®»¼�� kdl�¡ppr¼ °̄±²�³�̄́ �̄µ¶±·�³�¶̧±¹�º�¼»¼ � �ql�¯́±·�º�½¾¿ÀÁÂ�ÃÀÄ� � :ql� Å343/.-9/Æ���FF�?J<CI�ÇÈÉ�GC�F=�>�FFG��Æ���FF�=fC=�GJ@��EDFF�E=DAJ�K�GFJ<=G�Æ��@�BG�GCD�<DA<��Æ��=�=FJ�K�KFJ<=G�ID�=�kiq;�@��D<Ê�GCDEJFJC��Æ���>>@ACG�F=CC=A�D�<�F=KDF��JF=�?J<CIG�Æ�Ë�JÌ�=�A=�=GG=<�EDG=�<=GJK��DFF@?G��DGC=AG�C@�E=�D<<=<�?JCI@�C�D<<J�K�D<<JCJ@�DF�I=JKIC�C@�CI=�>=<=GCDF� ¡ppr® ¡ppr¼

������������������������� !"#$ %&�#"!&�'()�**�+ ,�-' .�/0)'�+ ,�-' 12�%&�#"!&�'3�"*�00) %&�#"!&�'

/"$4��'#5"!6 (!0��$'7%"*"#$8�$0#0)"

- �'595%0*:"#$7 (!�-9"#$

('�!"#$/05;"!�*"!67 <�'�9�00) =0# '�'#-'�. 2��"#"#$�2�>*'5�30:&*�

� �'59"#$=�5'$00:5 ?@AB���C@�D�E@FGH�?IB�IJGBKG@LM�NOPQ�ROSTU�OVVOPWTX�VY�YZT[WTO\�]ÛRRT[�\YY[�_ŜV�OS\�YZT[WTO\�XWTU]̀�� M�aRV̂YSOU�VOPQ�ROSTU�R[YẐ\TX�XROPT�OV�VYR�OS\�bYVVYc�]Y[�PObM�eVTTU�][OcT�]Y[�cY_SV̂Sd�̂SPU_\T\̀�M�fWYYXT�][Yc�Y_[�fY[RY[OVT�]Ob[̂PX�]Y_S\�YS�ROdT���g�Y[�XRTP̂OU�Y[\T[�OSh�i_̂U]Y[\�Y]�jÔST�]Ob[̂P̀klmno�plq� rstnuvsluv� � q�}~���� �������������������� ��������������������������������}~�¢� �£������������������ ���������������¤����������������}~�¥� £������������������� ��������������¦§�������������̈��}~��� ¦������������������� ��������������¦¦����������������}~�ª� ¦������������������� �����������������������������¡��C@�D�H�«KC�F«�M�NOXQ�ÛdWV̂Sd�OVVOPWTX�VY�YZT[WTO\�]ÛRRT[�\YY[�_ŜV�OS\�YZT[WTO\�XWTU]̀� M�¬SPU_\TX�VWT�\̂]]_XT[�UTSX̀M�XTX�TST[dh�T]]̂P̂TSV���®�N��b_Ub̀klmno�plq� rstnuvsluv� � q��¥̄¥°y �§�����¤��������� � ��±²³́µ³¶µ·�̧́�¹µ³º»�¼̧µ½¾�¥̄¥°y }y}¿� DGÀGL�@H�DG�HI�D�CÁÂAHGB�ÃUTOXT�[TO\�PO[T]_UUh�VY�]OP̂ÛVOVT�R[YRT[�Y[\T[̂Sd�Y[�POUU�P_XVYcT[�XT[ẐPT�OV��Ä�©©Ä���Ä�©̈¡�]Y[�OXX̂XVOSPT̀�fe¬¬�RT\TXVOUX�XŴR�Å̂VW�QThT\�OÛQT�UYPQX�OU[TO\h�̂SXVOUUT\̀�fe¬¬�YZT[WTO\X�XŴR�Å̂VW�[OS\YcUh�S_cbT[T\�RÔ[T\�UYPQX�ÆRT[�YZT[WTO\Ç̀�NY�QTh�OÛR[Y\_PV�Y[\T[�VWT�ORR[YR[̂OVT�È_OSV̂Vh�Y]�ÛQT�S_cbT[T\�PY[T�Q̂VX�]Y[�TOPW�ÅY[QXVOV̂YS̀�ÉTcYZObUT�fY[T�Ê̂VX�̂SPU_\T�YST�PY[TË�VÅY�QThXË�YST�PY[TOS\�̂SXV[_PV̂YSX̀� klmno�plq� rnv|{sÌxslu� � q�}y}¿�� ÉTcYZObUT�ÍYPQ�fY[T�Ê̂V� � ��}y}¿�� ÉTcYZObUT�ÍYPQ�fY[T�Ê̂V� � ��}y}¿¢� ÉTcYZObUT�ÍYPQ�fY[T�Ê̂V� � ��}y}¿Î� ÉTcYZObUT�ÍYPQ�fY[T�Ê̂V� � ��}y}¿¥� ÉTcYZObUT�ÍYPQ�fY[T�Ê̂V� � ��}~~k¿ÏÐÑ� jOXVT[�ÊTh� � ���±²³́µ³¶µ·�̧́�Ò́µ²·Ó�¼̧µ½¾plxnÔÕ�Ö×Ø���������Ù�Ú�Û�Ú����ÜÝÞÞ�Ù���ß�ÜÝÞÞ����������ß�Ø�����Ø�Û�Ø����à��áâã���äØ��Ù���åDGÀAI@BL��ÁEEIBC� klmno�plq� rnv|{sÌxslu� � q�è����Ú��×Ø��é�ä×�����ÙØ��Û��Ö����������������å� ����§ê����ë�£ê���Ø�ß��¦§ê������Øå�æ¥̄�ç �Ù���à�Ø�ì�����âØ��Û��Ö�Û�����£§§Õíß��� ���¦§ê������Øß������å±²³́µ³¶µ·�̧́�¹µ³º»�¼̧µ½¾��

�æ¥̄�ç �æ¥̄ °̄ç

4 www.thermoscientific.com/hamilton

Thermo Scientific Hamilton Laboratory Fixtures and Accessories

Choosing a Sink:

Sink material is driven by work surface selection.

Drain and trap materials also must be choosen carefully, be suitable to the application and comply with applicable codes. Contact

Modified Stainless Epoxy Steel Resin Polyolefin

Abrasion-Resistance E G G

Chemical-Resistance G E S

Cleanability E E E

Heat-Resistance G E F

Impact-Resistance E E S

Maintenance Cost E G E

Moisture-Resistance S E E

Sanitation E G G

Smoke Toxicity E E P

Stain-Resistance E E G

S=Superior E=Excellent G=Good F=Fair P=Poor

Sink Material Attributes

Sinks

9Laboratory Fixtures and Accessories

Polyolefin Sinks

Polyolefin Single Compartment Countertop Sinks

Installation Requirements mounting as well as conventional under-counter method.

Ordering Information blue when ordering quantities of 15 or more (as a special order).

Detail Sink Mounting

Sink

Flush Mounting Rim

Work Surface

Lug

Inside Dimensions Outside Dimensions Drain Position

Product Number A B C D E F G H

Center Drain 52L20100 12” (30.5 cm) 8” (20.3 cm) 8” (20.3 cm) 14-1/2” (36.8 cm) 10-1/2” (26.7 cm) 10-1/2” (26.7 cm) 6” (15.2 cm) 4” (10.2 cm) 52L21100 18” (45.7 cm) 15” (38.1 cm) 12” (30.5 cm) 20-1/2” (52.1 cm) 17-1/2” (44.5 cm) 15” (38.1 cm) 9” (22.9 cm) 7-1/2” (19.1 cm) 52L21400 24” (61.0 cm) 20” (50.8 cm) 12” (30.5 cm) 26-1/2” (67.3 cm) 22-1/2” (57.2 cm) 15” (38.1 cm) 12” (30.5 cm) 10” (25.4 cm) Corner Drain 52L20200 12” (30.5 cm) 12” (30.5 cm) 8” (20.3 cm) 14-1/2” (36.8 cm) 14-1/2” (36.8 cm) 11” (27.9 cm) 3-1/2” (8.9 cm) 3-1/2” (8.9 cm) 52L20300 14” (35.6 cm) 10” (25.4 cm) 6” (15.2 cm) 16-1/2” (41.9 cm) 12-1/2” (31.8 cm) 9” (22.9 cm) 3-3/4” (9.5 cm) 4” (10.2 cm) 52L20500 16” (40.6 cm) 16” (40.6 cm) 8” (20.3 cm) 18-1/2” (47.0 cm) 18-1/2” (47.0 cm) 11-1/2” (29.2 cm) 3-1/2” (8.9 cm) 3-1/2” (8.9 cm) 52L20600 18” (45.7 cm) 12” (30.5 cm) 8” (20.3 cm) 20-3/4” (52.7 cm) 14-3/4” (37.5 cm) 10-1/4” (26.0 cm) 3” (7.6 cm) 3” (7.6 cm) 52L20700 18” (45.7 cm) 14” (35.6 cm) 10-1/2” (26.7 cm) 20-1/2” (52.1 cm) 16-1/2” (41.9 cm) 13-1/4” (33.7 cm) 3-1/2” (8.9 cm) 3-1/2” (8.9 cm) 52L20800 18” (45.7 cm) 15” (38.1 cm) 8” (20.3 cm) 20-1/2” (52.1 cm) 17-1/2” (44.5 cm) 10-1/4” (26.0 cm) 4” (10.2 cm) 4” (10.2 cm) 52L20900 18” (45.7 cm) 15” (38.1 cm) 12” (30.5 cm) 20-1/2” (52.1 cm) 17-1/2” (44.5 cm) 15” (38.1 cm) 4” (10.2 cm) 4” (10.2 cm) 52L21000 18” (45.7 cm) 15” (38.1 cm) 10” (25.4 cm) 20-1/2” (52.1 cm) 17-1/2” (44.5 cm) 13-1/4” (33.7 cm) 3-1/2” (8.9 cm) 3-1/2” (8.9 cm) 52L21200 21” (53.3 cm) 18” (45.7 cm) 10” (25.4 cm) 23-1/2” (59.7 cm) 20-1/2” (52.1 cm) 12-3/4” (32.4 cm) 3-1/2” (8.9 cm) 3-1/2” (8.9 cm) 52L21300 24” (61.0 cm) 16” (40.6 cm) 8” (20.3 cm) 26-1/2” (67.3 cm) 18-1/2” (47.8 cm) 11” (27.9 cm) 4” (10.2 cm) 4” (10.2 cm) 52L21500 25” (63.5 cm) 15” (38.1 cm) 10” (25.4 cm) 27-1/2” (69.9 cm) 17-1/2” (44.5 cm) 13” (33.0 cm) 4” (10.2 cm) 4” (10.2 cm) 52L21600 28” (71.1 cm) 20” (50.8 cm) 9” (22.9 cm) 30-1/2” (77.5 cm) 22-1/2” (57.2 cm) 12” (30.5 cm) 4” (10.2 cm) 4” (10.2 cm) 52L21700 31” (78.7 cm) 17” (43.2 cm) 10” (25.4 cm) 33-1/2” (83.8 cm) 19-1/2” (49.5 cm) 13-1/2” (34.3 cm) 4” (10.2 cm) 4” (10.2 cm) End Drain 52L20400 16” (40.6 cm) 8” (20.3 cm) 7” (17.8 cm) 18-1/2” (47.8 cm) 10-1/2” (26.7 cm) 9-1/4” (23.5 cm) 4” (10.2 cm) 4” (10.2 cm)

FLUSH MOUNTING RIM

Sink Size-Inside Dimensions Sink Size-Inside Dimensions

Product Number A B Product Number A B 52L12080 12” (30.5 cm) 8” (20.3 cm) 52L18150 18” (45.7 cm) 15” (38.1 cm) 52L12120 12” (30.5 cm) 12” (30.5 cm) 52L21180 21” (53.3 cm) 18” (45.7 cm) 52L14100 14” (35.6 cm) 10” (25.4 cm) 52L24160 24” (61.0 cm) 16” (40.6 cm) 52L16080 16” (40.6 cm) 16” (40.6 cm) 52L24200 24” (61.0 cm) 20” (50.8 cm) 52L16160 16” (40.6 cm) 8” (20.3 cm) 52L25150 25” (63.5 cm) 15” (38.1 cm) 52L18120 18” (45.7 cm) 12” (30.5 cm) 52L28200 28” (71.1 cm) 20” (50.8 cm) 52L18140 18” (45.7 cm) 14” (35.6 cm) 52L31170 31” (78.7 cm) 17” (43.2 cm)

Top View

D A

B

H

G

E

Section View

CF

14 www.thermoscientific.com/hamilton

Accessories

Supports for Epoxy Resin Sinks

Fixture Hole Plug

Epoxy Resin Drain Trough

Trough Support for Epoxy Resin Drain Trough

Metal Sink Support

8-3/4” (22.2 cm)

3/4” (1.9 cm)

2” (5.1 cm)

7” (17.8 cm)

3/4” (1.9 cm)

4” (10.2 cm)

Metal frame to support and position epoxy resin sink

Product Number Base Unit Width Steel Sink Cabinet

52L73100 18” (45.7 cm) 52L73200 24” (60.9 cm) 52L73300 30” (76.2 cm) 52L73400 36” (91.4 cm) 52L73500 42” (106.6 cm) 52L73600 48” (121.9 cm) 52L73700 52” (132.0 cm) 52L73800 58” (149.3 cm) 52L73800 60” (152.4 cm) 52L75000 Corner Unit

Wood Sink Cabinet 52L74100 18” (45.7 cm) 52L74200 24” (60.9 cm) 52L74300 30” (76.2 cm) 52L74400 36” (91.4 cm) 52L74500 42” (106.6 cm) 52L74600 48” (121.9 cm) 52L74700 52” (132.0 cm) 52L74800 58” (149.3 cm) 52L74800 60” (152.4 cm) 52L74900 Corner Unit

Hanger Brackets for Epoxy Resin Sinks

For additional or replacement brackets only

Product Number 52L75600

Metal frame to support all epoxy resin sinks installed in wood open-frame tables

Use two supports per sink

Product Number 52L75100 7-1/2” (19.1 cm) deep 52L75400 12-1/2” (31.8 cm) deep steel sinks

Product Number 52L10000* radius

(16.8 cm) wide, 4-9/16” deep

(19.3 cm) wide, 5-1/16 deep

6’ to 12’, 12’ to18’, please specify number of ends and drain location when two ends are specified

Product Number Length trough on wall or center table

Product Number 531S3270 Wall Mount 531S3280 Center Mount

Top/Pipe Support Frame forming chase to secure service lines

28-1/4” (71.7 cm) and standing 34-1/4” (86.9 cm) heights

Product Number

Sitting Height 57L41100 7” Wide Standing Height 57L42300 7” Wide 57L42306 10” Wide 57L42307 20” Wide

*Available on extended lead times

16 www.thermoscientific.com/hamilton

Stainless Steel Fittings

Cupsinks Overflows

Round cupsink with 1/2” (3.8 cm) tailpiece

Product Number O. D. I. D.

34L18200 5-5/8” (14.3 cm) 4” (10.2 cm) 34L18300 6-5/8” (16.9 cm) 5” (12.7 cm) 34L18400 7-5/8” (19.4 cm) 6” (15.2 cm)

5-1/16” (12.9 cm)

5-11/16” (14.5 cm) x 4-19/32” (17.7 cm) x 6- 3/4” (17.1 cm)

Product Number

34L19100 x 3-1/8” (8.0 cm)

Product Number

34L18900

*Available on extended lead times

Product Number Height

34L17700 4” (10.2 cm) 34L17800* 6” (15.2 cm) 34L17900 8” (20.3 cm)

Outlets tailpiece

Product Number Overall Diameter

34L17600 2-7/8” (7.3 cm) 34L32300 4-1/2”(11.4 cm)

1-1/2” (3.8 cm) tailpiece.

Product Number

34L0180034L01800 tailpiece.

27Laboratory Fixtures and Accessories

WaterSaver Standard Construction Fixtures

Mixing Faucet

—Deck Mounted

—Wrist Blade Handles

Application: Deck mounted faucet with blade handles for hot and cold water.

Body: Forged brass with polished chrome plated finish.

Valve Units: WaterSaver self-contained compression valve units with replaceable stainless steel seats.

Handle blade handles with color-coded index disc.

Gooseneck: 6” rigid gooseneck or 6” swing gooseneck.

Inlet: 1-3/16” male shank with (2) 3/8” OD flexible copper tubes.

Furnished complete with locknut and washer.

Outlet: 3/8” NPS female outlet with removable ten serration hose end.

Quality Assurance: Faucet is fully assembled and factory tested prior to shipment.

Product Number

Laboratory Mixing Faucets

Mixing Faucet

—Deck Mounted

—Aerator Vacuum Breaker

Application: Deck mounted faucet with vacuum breaker for hot and cold water.

Body: Forged brass with polished chrome plated finish.

Valve Units: WaterSaver self-contained compression valve units with replaceable stainless steel seats.

Handle handles with color-coded index disc.

Gooseneck: 6” rigid gooseneck or 6” swing gooseneck.

Vacuum Breaker: Integral vacuum breaker to prevent backflow.

Vacuum breaker has replaceable seat and ultra-light float cup to resist spilling at low flow.

Inlets: 1-3/16” male shank with

(2) 3/8” OD flexible copper tubes.

Furnished complete with locknut and washer.

Outlet: 3/8” NPS female outlet with removable aerator.

Quality Assurance: Faucet is fully assembled and factory tested prior to shipment.

Product Number

Mixing Faucet

—Deck Mounted

—Vacuum Breaker

—Wrist Blade Handles

Application: Deck mounted faucet with vacuum breaker for hot and cold water.

Body: Forged brass with polished chrome plated finish.

Valve Units: WaterSaver self-contained compression valve units with replaceable stainless steel seats.

Handle blade handles with color-coded index disc.

Gooseneck: 6” rigid gooseneck or 6” swing gooseneck.

Vacuum Breaker: Integral vacuum breaker to prevent backflow.

Vacuum breaker has replaceable seat and ultra-light float cup to resist spilling at low flow.

Inlet: 1-3/16” male shank with (2) 3/8” OD flexible copper tubes.

Furnished complete with locknut and washer.

Outlet: 3/8” NPS female outlet with removable ten serration hose end.

Quality Assurance: Faucet is fully assembled and factory tested prior to shipment.

Product Number

Jacobs Gardner - Browse Catalog

Main Features Manufacturer: DMi Office Furniture

Manufacturer Part Number: 7350-08

Brand Name: DMi

Product Line: Governor

Product Name: Governor Open Bookcase

Packaged Quantity: 1 Each

Product Type: Bookshelf

Product Information

Finishing: Mahogany Laminate

Shelves: 3 x Adjustable

Application/Usage: Office

Color: Mahogany

Material: Pressboard

Physical Characteristics

Dimensions: 74" Height x 30" Width x 14" Depth

Weight: 148 lb

Shipping Weight: 148 lb

Miscellaneous

Additional Information:

Two stationary shelves

Certifications & Standards:

ANSI/BIFMA

Recycled: No

Recycled Content: 0%

Post-consumer-waste%: 0%

Assembly Required: No

Country of Origin: US

Warranty

Standard Warranty: Lifetime Limited

Copyright (c) eCommerce Industries, Inc. 2012.

JSN: F0240

CHAIR, EXECUTIVE, SWIVEL

JACOBS GARDNER

Be the first to write a review Item #: HON2192NSR11

Back Print

Product Information

HON Pillow-Soft 2192 Managerial Mid Back Chair - Leather Black Seat, Foam - Upholstery - Wood Mahogany Frame - 26.3" x 28.8" x 41.8" Overall Dimension

Leather Black Seat, Foam - Upholstery - Wood Mahogany Frame - 26.3" x 28.8" x 41.8" Overall Dimension

• An all-time best-seller for HON, one of America's leaders in high-quality seating

• Comfort adjustments include center-tilt with tension and upright lock

• Seat cushion contains a top layer of memory foam to eliminate pressure points

• Back cushion combines both foam and a layer of polyester fiberfill to support the spine

• Backed by the HON Full Lifetime Warranty

Catalog: General Line (consumer)

Catalog Catalog page: 130

List Price:

$856.00

Packaging:

1 Each

Quantity:

Main Features

• Manufacturer: The HON Company

• Manufacturer Part Number: 2192NSR11

• Manufacturer Website Address: http://www.hon.com

• Brand Name: HON

• Product Line: Pillow-Soft

Product Details Accessories Product Reviews

Home My Account My Orders Shopping Featured Items

• Product Series: 2190

• Product Model: 2192

• Product Name: Pillow-Soft 2192 Managerial Mid Back Chair

• Packaged Quantity: 1 Each

• Product Type: Chair

Marketing Information

Managerial mid-back, swivel chair features quality visco-elastic memory foam in the seat cushion. Memory foam reduces pressure points, responding to contours of the body for lasting comfort over extended-use periods. Design offers laminated hardwood with urethane top pads, a five-star base with wood caps, and fully upholstered outer back. Dual-wheel, hooded casters roll effortlessly and silently. Functions include pneumatic seat-height adjustment from 16-3/4" to 21-1/4", 360-degree swivel, tilt, tilt tension and tilt lock. Usable seat depth is 18-1/2". Seat measures 22" wide x 21" deep.

Back dimensions are 22" wide x 18" high. Chair is certified by SCS to be in compliance with specific air quality emission requirements. Meets or exceeds ANSI/BIFMA and ISTA performance standards.

General Information

Manufacturer The HON Company

Manufacturer Part Number 2192NSR11

Manufacturer Website Address http://www.hon.com

Brand Name HON

Product Line Pillow-Soft

Product Series 2190

Product Model 2192

Product Name Pillow-Soft 2192 Managerial Mid Back Chair

Marketing Information Managerial mid-back, swivel chair features quality visco-elastic memory foam in the seat cushion. Memory foam reduces pressure points, responding to contours of the body for lasting comfort over extended-use periods. Design offers laminated hardwood with urethane top pads, a five-star base with wood caps, and fully upholstered outer back. Dual-wheel, hooded casters roll effortlessly and silently. Functions include pneumatic seat-height adjustment from 16-3/4" to 21-1/4", 360-degree swivel, tilt, tilt tension and tilt lock. Usable seat depth is 18-1/2". Seat measures 22" wide x 21" deep. Back dimensions are 22" wide x 18" high. Chair is certified by SCS to be in compliance with specific air quality emission requirements. Meets or exceeds ANSI/BIFMA and ISTA performance standards.

Packaged Quantity 1 Each

Product Type Chair

Product Information

Chair/Seat Type Management Chair

Adjustable Seat Yes

Seat Material • Leather

• Foam

Seat Color Black

Minimum Seat Height 16.75"

Maximum Seat Height 21.25"

Seat Width 22"

Seat Depth 21"

Back Material Upholstery

Back Height 18"

Back Width 22"

Arm Material Wood

Arm Color Mahogany

Frame Material Wood

Frame Color Mahogany

Base Shape 5-star

Base Material Steel

Number of Casters 5

Features • Tilt Tension

• Pneumatic Adjustment

• Lumbar Support

• 360° Swivel

• Tilt Lock

• Tilt

• Seat Height Adjustment

Physical Characteristics

Color Black

Height 41.8"

Width 26.3"

Depth 28.8"

Miscellaneous

Certifications & Standards • ANSI/BIFMA

• ISTA

Recycled Yes

Recycled Content 28%

Post-consumer-waste% 24%

Assembly Required No

Green Compliant Yes

Green Compliance Certificate/Authority

SCS

Country of Origin United States

Marketing Information

"S" shaped back cushions provide support to the upper and lower back areas. Upholstered armcaps are

General Information

Manufacturer Global Upholstery Co., Inc

Manufacturer Part Number 4737BKPB08

Manufacturer Website Address http://www.globaltotaloffice.com

Brand Name Global

Product Line Commerce

Product Name Commerce Series Low-Back Swivel/Tilt Chair

Marketing Information "S" shaped back cushions provide support to the upper and lower back areas

Upholstered armcaps are standard.

Product Type Chair

Product Information

Chair/Seat Type Management Chair

Seat Material Polypropylene

Seat Color Blue

Seat Width 21.25"

Seat Depth 19.50"

Back Height 17"

Back Width 21.25"

Arm Color Blue

Frame Color Black

Base Shape 5-star

Number of Casters 5

Features Pneumatic Adjustment•

Tilt Tension•

Tilt Lock•

360° Swivel•

Physical Characteristics

Height 35.0"

Width 24.8"

Depth 28.0"

Weight (Approximate) 45.00 b

Miscellaneous

Additional Information Curved Style Arm•

Contoured Style Seat• Epoxy Powder Coated Base/Frame Finish• Injection Molded Base/Frame Material•

Certifications & Standards ANSI/BIFMA

Recycled No

Recycled Content 0%

Post-consumer-waste% 0%

Assembly Required Yes

Pedigo - The 5-Series Stools

The 5-Series Stools

Large inventory for fast delivery Designed for ease of cleaning Commitment to superior customer service Custom upholstery colors available to match every decor Standard Upholstery Color Samples and information on how to order these stools in our new TB-133 Approved and PVC-Free versions

P-536-GS Exam Stool P-555-GS Lab Stool

P-536 Exam Stool P-521-GS Exam Stool

P-551-GS Chair P-526-GS Exam Stool

P-551 Chair

Shown in Burgundy

P-536-GS Exam Stool

14" round cushioned seat

21-1/2" diameter chrome base

Pneumatic height adjustment

Easy rolling 2-1/2" casters

19-1/4" to 23-1/2" height adjustment

P-536-GS Exam Stool

P-536-GS Exam Stool

JSN: F0420

CABINET, FILING, LATERAL, HALF HEIGHT

JACOBS GARDNER

folders from side-to-side with included adjustable hangrails. Drawers are flush at the top and sides and feature aluminum recessed drawer pulls, plastic label holders and drawer-extension restraint. Mechanical interlock allows only one drawer to open at a time. 42" wide lateral file also offers four adjustable leveling guides for stabilizing; HON

One Key interchangeable, core-removable lock; and reinforced case steel construction.

Lock mechanism secures both sides of drawers.

General Information

Manufacturer The HON Company

Manufacturer Part Number 692LL

Manufacturer Website

Address http://www.hon.com

Brand Name HON

Product Series 600

Product Name 600 Series Standard Lateral File

Marketing Information Two-drawer lateral file offers exceptional construction with double-walled base construction for maximum rigidity. Baked enamel finish over rust-inhibiting, phosphate pretreatment adds more durability.

Telescoping, ball-bearing suspension delivers remarkably smooth drawer operation. Drawers accommodate letter-size or legal-size folders from side-to-side with included adjustable hangrails.

Drawers are flush at the top and sides and feature aluminum recessed drawer pulls, plastic label holders and drawer-extension restraint. Mechanical interlock allows only one drawer to open at a time. 42" wide lateral file also offers four adjustable leveling guides for stabilizing; HON One Key interchangeable, core-removable lock; and reinforced case steel construction. Lock mechanism secures both sides of drawers.

Packaged Quantity 1 Each

Product Type File Cabinet

Product Information

Total Number of Drawers 2

Drawer Type File

Media Size Supported • Legal

• Letter

Media Orientation

Supported

Lateral

Finishing Baked Enamel

Application/Usage File Storage

Features • Interlocking

• Leveling Glide

• Ball-bearing Suspension

• Recessed Handle

• Label Holder

• Durable

Physical Characteristics

Color Putty

Material Steel

Height 28.4"

Width 42"

Depth 19.3"

Weight (Approximate) 158 b

Miscellaneous

Certifications & Standards • SCS

• ANSI/BIFMA

Recycled Yes

Recycled Content 26%

Post-consumer-waste% 23%

Assembly Required No

Green Compliant Yes

Green Compliance

Certificate/Authority

• SCS

• SCS Indoor Advantage Gold

Country of Origin United States

Warranty

Limited Warranty Lifetime

1 of 2 Zoom View

Price:

66'' Desk

Qty. 1 Add to Cart

Add to Favorites

Item: 900944 Model: ONDSSP6630-JV

Item qualifies for free delivery

Expected Delivery 7-14 Business Days

Item qualifies for free delivery to a store near you. (Learn more)

Delivery Only

Regency® OneDesk Collection 66" Single Pedestal Desk, Java/White Finish

Product Details Supplies & Accessories Also Consider

Single pedestal can be mounted on either side, making this desk ideal for "L" and "U" configuration applications.

Modern, clean, contemporary look features beautiful wood toned laminates with polished metal handles and accents.

Rich Java finished melamine with White accents and polished metal hardware

Pedestal had a locking file drawer for letter or legal size files and two box drawers for additonal storage

Dimensions: 30"H x 66"W x 30"D•

File drawer has White interior and includes hanging rails for letter and legal filing

Pedestal can be mounted on either side•

Includes leveling glides•

Meets or exceeds ANSI/BIFMA standards•

Ready to assemble•

5-year mfr. limited warranty•

900944

JSN: F2000

BASKET, WASTEPAPER, FIRE RESISTANT

SPECIALMADE

JSN: F2540

SHREDDER, PAPER, SECURITY

GAYLORD

HOME / EQUIPMENT / OFFICE / SHREDDERS

SX16-08 Cross-Cut Shredder

Part #: 1758495

The Swingline® SX16-08 Cross-Cut Shredder delivers fast and easy shredding. Shred up to 16 sheets per pass into unreadable 5/32 x 1 3/4" particles. The unit also shreds staples and paper clips so materials don't need to be prepped, as well as CDs and credit cards for secure disposal of all confidential information. The unit's non-stop Jam Free™ technology rectifies misfed paper and saves time.

Cut Style Cross-cut

Particle Size (in.) 5/32 x 1 3/4

Items Shredded Paper, paper clips, staples, credit cards, CDs, DVDs

Number of Sheets per Pass 16

Feet per Minute Shredded 7

Wastebasket Capacity (gallons) 8

Jam-proof Yes

Status Indicator Lights Yes

Paper Entry (in.) 9

Color Black/Silver

Height (in.) 22

Width (in.) 17

Depth (in.) 13

Brand Swingline®

PROUDLY SERVING ARCHIVES, LIBRARIES & MUSEUMS

ROLLOVER TO ZOOM

Quantity:

ADD TO CART ADD TO

WISHLIST

#: 1758495

SX16-08 Cross-Cut Shredder

L1300

Looks smart. Thinks smart.

RE P O RT I N G

N O

A H

EM

R REA

D Y

C O

UNSEL IN G

P M

M

H IT

IMMITTANCE

A U

D

IO

M

ET

RY

The MADSEN Itera II builds on the achievements of its acclaimed predecessor to set a whole new standard in audiometric performance, simplicity and elegant design. Compact, reliable and versatile, it’s the per-fect diagnostic audiometer for the busy dispenser or clinician.

Top performance in a stylish cabinet

Continuing our tradition of manufacturing high-quality instrumentation, the Itera II combines great performance with excep-tional design and perfect ergonomics. And recogniz-ing that an audiometer is the daily workhorse in your clinic or practice, we have constructed an instrument that doesn’t just look good, but is robust and comfort-able to use.

The ideal instrument for tone and speech audiometry, Itera II features two independent channels, extensive patient communication facilities, and ipsi/contra lateral masking. And because it’s

NOAH-compatible, it can be integrated into today’s computerized offices and interface with PC-based hearing instrument fitting and dispensing systems.

You define what’s best for you

Recognizing that different testing environments have varying requirements, the

Itera II is available with a range of options so that you can configure the best solution for your clinic or dispensing practice.

Hearing Instrument

Simulator

The options include the most commonly used special tests as well as an automatic Hearing

Instrument Simulator (HIS) second to none in function-ality and ease of use. And for ototoxic monitoring, we also offer the option of high frequency audiometry up to 16 kHz.

By combining these optional functions with the appropriate transducers, you can extend your diagnostic capabilities, now and in the future.

Smart solutions to meet your needs

Every function is at your fingertips

Lights and the display let you see at a glance how the instrument is set up – here AC tone audiometry, using a pure tone signal presented via the right channel, and with NBN masking selected for the left channel.

High frequency air conduction testing The standard frequency range of the Itera II is 125 Hz to 12.5 kHz. We also offer the option of high frequency testing up to 16 kHz for ototoxic monitoring.

Quick Guides To make it even easier to learn and use the Itera II, a number of convenient Quick Guides are supplied with the audiometer.

Speech audiometry

Binaural speech testing with completely flexible signal routing (permits ipsi/contra lateral masking).

Itera II fully supports dichotic speech testing and is perfectly suited for central auditory assessment.

Smart rotary knobs

Tactile feedback from rotary knobs means you don’t have to take your eyes off the patient when changing frequency and level.

Special tests

Available options include SISI, Stenger, ABLB (Fowler).

Hearing Instrument Simulator (Optional)

Provides you with an excellent tool for counseling patients.

Features automatic setup of settings so that you can start simulation quickly.

Improves accuracy (no manual calculations involved) and presents immediate results.

Enhanced patient communication and monitoring system

The Itera II features improved technology for superior sound and enhanced product quality.

Talk over and talk back buttons are easily accessible.

Sound field option Itera II provides comprehensive options for sound field testing.

Enhanced memory function All AC, BC, UCL, MCL and SF thresholds can be stored for both ears.

Customize your workflow

The comprehensive setup options enable you to configure the Itera II according to your preferences, cutting down test time and giving you more “quality time” with your patients.

Easy switching between left and right

Switch between testing your patient’s right or left ear at the press of one button.

Press twice to enable both left and right (in speech mode).

Internal power supply for CD player

For speech testing, you don’t have to search for an AC plug for your CD player – just connect to the audiometer’s rear panel and eliminate a bulky power adapter. Or save batteries.

OTOsuite™ compatible Itera II is an integral part of our OTOsuite software platform.

The MADSEN Itera II can be used either as a stand-alone audiometer or connected directly to a PC using our innovative OTOsuite™

Audiometry module.

There are many benefits to using your PC with

MADSEN Itera II. The manu-al recording of audiograms on paper pads is replaced with electronic record-ing in a real-time graphic interface. Test results are monitored directly on your

PC screen as detailed audio-grams with all necessary information. The layout has been designed to provide

“information at a glance” and allows you to stay in close visual contact with your patient.

The PC module supports aided/unaided speech testing, including a live

VU-meter, speech scoring, and “smart” registration of test results. Features, such as a built-in Masking

Assistant™ and visual overlays, ensure high-qual-ity diagnostic testing and patient involvement.

When using MADSEN Itera

II with a PC, test data are automatically recorded and stored, which makes it easy to review, file, and re-use diagnostic results in dif-ferent contexts. Not only will this save you time, it dramatically reduces the risk of errors. Test data can be integrated with electronic medical records via the standard XML data format, stored in or out-side of NOAH, or included in reports for third-party sharing. And if you need to print the audiogram, the easy-to-read symbols ensure safe and accurate interpre-tation.

Benefits of PC connectivity

Interpret and compare audiograms Compare previous audiograms or specific curves of your choice. You can even view an audiogram from a previous session, while measuring a new one.

Layered graphics Layered graphics assist in coun-seling patients and relatives on the hearing loss.

Masking Assistant The Masking Assistant™ alerts whenever masking is recom-mended at specific frequencies.

Personalize your view settings Choose your favorite view set-tings, including the option of graphical or tabular view of speech, giving you a good over-view while testing.

The software has large and clear audiograms and can easily be adjusted to fit your preferred view settings.

MADSEN Itera II is an integral part of the OTOsuite™ software universe

– Otometrics’ shared universe for

Immittance, Audiometry, Speech

Mapping and Simulators.

Once you have connected your

MADSEN Itera II and opened the

OTOsuite universe, the entire patient handling can be performed conve-niently within one framework.

OTOsuite™ is a software universe in which your individual diagnostic and fitting tools are integrated. OTOsuite provides access to everything you need for the entire client journey, including audiometry, immittance, fitting and verification tools – via a single intuitive software interface. This makes testing and data handling more efficient and accurate.

OTOsuite also offers an easy-to-use reporting tool. You can choose from a range of templates that you can customize with your name and logo.

OTOsuite is EMR-READY (Electronic

Medical Records) and NOAH compatible. Direct integration ensures a streamlined, integrated workflow that saves you time and gives your clients a better experience.

The OTOsuite Universe

Hearing Loss / Hearing Instrument Simulators

OTOsuite increases the overall value of your diagnostic and fitting equipment. A variety of instruments are available across the five modules today. And the more modules you ad to your OTOsuite, the greater the benefits!

[Link]

RE P O RT I N G

N O

A H

EM

R REA

D Y

C O

UNSEL IN G

P M

M

H IT

IMMITTANCE

A U

D

IO

M

ET

RY

GN Otometrics, Europe. +45 45 75 55 55. info@gnotometrics.dk

GN Otometrics, North America. 1-800-289-2150. sales@gnotometrics.com www.otometrics.com

Sp ec if ic at io n s ar e su b je ct t o c h an g e w it h o u t n o ti ce

C o p yr ig h t

G N

O to m et ri cs

/1

-2

-6

-E

N /0

Pa rt n o

-2

-6

-E

N

Weighing in at just ten compact pounds or under

5 kg, the Itera II diagnostic audiometer is well-suited for portable use.

In its custom carrying case, the Itera II unpacks and is ready to use in less than a minute, with no cords to untangle. Now you can have complete freedom of movement – just open the case, pull out the accesso-ries you want to use, plug in and you’re ready to start testing.

Take audiology to your patients

Distributor:

The MADSEN Astera opens up a world of testing possibili-ties with features and options that let you work the way you want. It’s the first clinical audiometer that combines the best of traditional, stand-alone audiometers and the newer

PC-based systems.

The Astera features an extensive test battery, a true two-channel setup, high frequency testing up to 20,000 Hz and so much more.

More myaudiometer. It’s familiar, and it’s so much

Find out more at www.myaudiometer.com

Copenhagen-based Otometrics is the world’s leading manufacturer of hearing and balance instrumentation and software, providing solutions ranging from infant screening applications and audiologic diagnostics, to balance testing and hearing instrument fitting.

Accessories* Headset with 12 kHz matched TDH39 phones Bone conductor (vibrator) B71 with…