E0123_Workstation, Straight, Freestanding, 72 W_Redacted.pdf

Specifications (continued)

Herman Miller Canvas Series Desks & Workstations for this project – Specifications and Key Features:

- All freestanding desks have solid end panels w/ non-supporting stationary F/F Pedestals & Mobile B/B/F pedestals

- All panel mounted work surfaces have intermittent brackets, but solid end panels w/ non-supporting pedestals

- All overhead cabinets (panel hung and desk hutches) will be laminate with metal and laminate sliding doors

- All panels will be a single fabric color, and be trimmed with closed kick bases, endcaps, post fillers and top caps.

- All drawers (and coordinating file cabinets) will have flush/integral linear drawer pulls and full extension slides

- All overheads will have task lighting below; LED Source with 9’-0”L grounded plugs and cord management clips

- All overheads will have fabric tack boards between their underside/task light and the work surface below

- All pedestal and file drawers will have include rails for hanging files and include lock cores all matched per room

- All panel based 110v power outlets will be located (belt-line) just above both work surfaces of L-Shape stations

- All data back-boxes will be located (beltline) just above the work surfaces, and Owner will do all network cabling

- Wire Management; there is a 1” cord drop between work surfaces and panels or overhead hutches (no grommets)

- Wire Management; there will be a 36”W J-channel below each work surface to gather excess cords and cabling

- No Paper Management; NO tool rails, trays, shelves or cups – Owner to provide any such desk accessories

- No Key Board Tray; NO keyboard tray, but they station and desk worksurfaces will accommodate them (by owner)

- Vendor will provide a Power/data connectivity requirements plan & guide to facilitate Owner’s location of utilities

- Vendor will factor in “shared panels” in clustered workstations, and reflect that in their pricing and install plan

Herman Miller Canvas Series Desks & Workstations – HM System Colors & Finish Specs (see page 1 for images):

- Worksurface Laminate: Canyon Zephyr (28) with MT Edgeband

- Support Panels/OH Color: Sandstone (WL)

- Files/Drawers Finish: Metallic Bronze (EH)

- Tack Board Fabric: Strands; Rye (8W06) – 100% Recycled Polyester, 66”W, meets ASTM E 84

Environmental Information: This furniture system likely contributes to LEED points system as it as its key sustainable features include; configured with low panel heights, is manufactured with renewable energy, uses 81% bio-based materials, offers a high degree of recycled and recyclable materials, contains agrifiber products, is lead, mercury & cadmium free.