W9124J-20-B-0001_final I_pdp3476.pdf

0011126824

This is an Invitation for Bids (IFB) for a Firm Fixed Price (FFP) Indefinite Delivery/Indefinite Quantity (IDIQ) contract for Paving (Asphalt) Installation & Maintenance. All w ork shall be in compliance w ith Federal, State, Local, Industry regulations and standards.

1-This is a 100% 8(a) competitive set-aside under NAICS 237310 w ith a small business size standard of $39.5M; no large business bids w ill be accepted for this procurement. It has been determined that competition w ill be limited to only 8(a) firms w hose business plans are being serviced by the Small Business Administration (SBA) Richmond District Off ice operating under the applicable NAICS code.

2-As required by DFARS Part 236.204 the estimated magnitude of construction for this project is betw een $25,000,000 and $100,000,000.

3-The aw ardee of this contract w ill be required to provide a Superintendent at all times w ork is being performed on the project (see clause at FAR 52.236-6). The Superintendent is considered a key position. This position SHALL NOT be subcontracted and must w ork directly for the prime contractor.

3-Bidders must provide name and address, valid CAGE Code (Block 14 FACILITY), Point of Contact (POC) and email address w ith their bid.

4-Task Order minimum is $1,000.00 and maximum is $1,500,000.00.

X

ISRAEL GUTIERREZ 210-466-2208

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

24-Jan-2020

(RFP)

(IFB)

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______5 calendar days and complete it w ithin ________ calendar days after receiving aw ard, X notice to proceed. This performance period is X mandatory, negotiable. (See _________________________Task Order

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the w ork required are due at the place specified in Item 8 by ___________ local time ______________24 Feb 2020 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee X is, is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______180 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

MICC - FSH

ATTN: MICC - FSH

2205 INFANTRY POST RD

210-466-2145

FORT SAM HOUSTON TX 78234-1361

W9124J

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

01:00 PM (hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

210-466-2183FAX:TEL: 210-466-2145 (DSN 450) TEL: FAX:

W9124J20B0001 357

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

W9124J20B0001

Section 00 01 15 - List of Drawing Sheets

ATTACHMENT LIST

ATTACHMENT LIST—

1- Attachment 01 – Statement of Work

2- Attachment 02 – CLIN Bid Schedule Spreadsheet

3- Attachment 03 – EPA Concrete Washout Guidelines

4- Attachment 04 – Fort Belvoir ESC Technical Bulletin #1

5- Attachment 05 – Fort Belvoir ESC Technical Bulletin #2

6- Attachment 06 – Fort Belvoir ESC Technical Bulletin #3

7- Attachment 07 – Spill-Card (So16 Spill Procedures)

Section 00 10 00 - Solicitation

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job 0001 - Asphalt Work

FFP

:Asphalt Work. FFP. The Contractor shall provide labor, materials, equipment, transportation, professional services for asphalt work to include but not limited to alteration, repairs of road paving, curb and gutter, paving of parking lots, sidewalk, running tracks, removal/application of asphalt.

FOB: Destination

PURCHASE REQUEST NUMBER: 0011126824

PSC CD: Y1LB

NET AMT

0002 600 Cubic

Yard

0001AA - Removal

FFP

:Remove existing deteriorated bituminous pavement section: including wearing/binder courses, aggregate base, and subbase.

FOB: Destination

0003 600 Cubic

0001AB

:Remove existing deteriorated portland cement concrete.

FOB: Destination

0004 2,500 Cubic

0001AC

:Remove existing soil or gravel.

FOB: Destination

0005 4,500 Square

0001AD

:Rework and compact 6" base, subbase, or subgrade FOB: Destination

0006 2,500 Linear

Foot

0001AE

:Clean cracks and joints in asphaltic concrete, and seal with the required crack sealing materials FOB: Destination

0007 25,000 Cubic

0001AF

:Construct stabilized aggregate base course FOB: Destination

0008 10,000 Square

0001AG

:Clean and apply prime or tack coat FOB: Destination

0009 10,000 Square

0001AH

:Construct bituminous asphalt binder course compacted to 3" FOB: Destination

0010 4,000 Square

0001AJ

:Construct bituminous asphalt wearing course compacted to 2" FOB: Destination

0011 1,000 Square

0001AK

:Construct bituminous asphalt wearing course compacted to 1.5" FOB: Destination

0012 20,000 Square

0001AL

:Construct geotextile fabric FOB: Destination

0013 150 Square

0001AM

:Clean asphalt concrete and apply asphalt slurry seal on existing surface.

Minimum delivery order of at least 10,000 YD2 FOB: Destination

0014 150 Each

0001AN

FFP

:Construct new precast concrete wheel stops to match existing FOB: Destination

0015 95 Each

0001AP

FFP

:Relocate existing wheel stops.

FOB: Destination

0016 150 Cubic

0001AQ

:Construct reinforced concrete structures incidental to asphalt work as required FOB: Destination

0017 3,500 Cubic

0001AR

:Furnish and replace topsoil, fine grade.

FOB: Destination

0018 6,000 Cubic

0001AS

:Furnish and place lime, fertilizer, seed, and mulch.

FOB: Destination

0019 3,500 Cubic

0001AT

:Furnish, place, and peg sod.

FOB: Destination

0020 1,000 Square

0001AU

:Furnish fine grading.

FOB: Destination

0021 115 Square

0001AV

:Remove existing top of manhole or drop inlet; extend to new height, as required, and reinstall manhole or drop inlet to match the road surface.

FOB: Destination

0022 5,500 Square

0001AW

:Remove existing valve boxes or fuel tank fill boxes, as required, to match flush with road surface.

FOB: Destination

0023 5,000 Each

0001AX

FFP

:Replace traffic light activator loops, as required. Sawcut 2" in depth and seal with a weatherproof epoxy resin sealer in the area depicted for installation of #14 AWG activator loop wire. This work includes pulling wire through conduit, all service connections, and required testing.

FOB: Destination

0024 1,000 Each

0001AY

FFP

:Remove existing painted line markings, figures, letters, and numbers FOB: Destination

0025 1 Linear

:Paint line markings, figures, and letters as specified or directed by the contracting officer. Make necessary surface preparations. (Note: All letters and numbers to be painted fully closed).

FOB: Destination

0026 75,000 Linear

0002AA

:4" solid line markings (yellow or white in color) on various roads.

FOB: Destination

0027 113 Linear

0002AB

:4" broken line markings (yellow or white in color) on various roads.

FOB: Destination

0028 75 Each

0002AC

FFP

:Straight or curved arrows (white in color) on various roads.

FOB: Destination

0029 75 Each

0002AD

FFP

:Double arrows (white in color) on various roads.

FOB: Destination

0030 75 Each

0002AE

FFP

:PED-X letters (white in color) on various roads.

FOB: Destination

0031 75 Each

0002AF

FFP

:STOP letters (white in color) on various roads.

FOB: Destination

0032 1,100 Each

0002AG

FFP

:ONLY letters (white in color) on various roads.

FOB: Destination

0033 75 Linear

0002AH

:12" crossing walk lines (white in color) on various roads.

FOB: Destination

0034 75 Linear

0002AJ

:18" stop lines (white in color) on various roads.

FOB: Destination

0035 95 Linear

0002AK

:4" slant lines (white or yellow in color) on various roads.

FOB: Destination

0036 95 Each

0002AL

FFP

:14" letters and numbers (white in color) to match existing letters.

FOB: Destination

0037 50 Each

0002AM

FFP

:10" letters and numbers (white in color).

FOB: Destination

0038 375 Each

0002AN

FFP

:6" and 4" letters and numbers (colors: yellow, white, red, green, or black.)

FOB: Destination

0039 375 Linear

0002AP

:Curbing (colors: yellow, white, red, green, or black) to include vegetation removal as required.

FOB: Destination

0040 3,500 Each

0002AQ

FFP

:Handicap symbols (color: white) approximate size 36" X 36".

FOB: Destination

0041 3,000 Square

0002AR

:Line markings (yellow or white in color) on various roads.

FOB: Destination

0042 1 Job

FFP

:Make necessary surface preparation and construct thermoplastic markings, figures, letters, and numbers as specified or directed by the contracting officer. (Note: All line markings, figures, numbers, and letters under the following number items shall be laid out by the contractor).

FOB: Destination

0043 1,875 Square

0003AA

:New thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0044 75 Each

0003AB

FFP

:New thermoplastic compound arrows (straight or curved), white in color.

FOB: Destination

0045 75 Each

0003AC

FFP

:New thermoplastic compound double arrows (white in color).

FOB: Destination

0046 94 Each

0003AD

FFP

:New handicap symbols (color: white), approximate size 36" X 36".

FOB: Destination

0047 75,000 Linear

0003AE

:New 4" thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0048 1 Job

FFP

:Make necessary surface preparation and construct thermoplastic markings, figures, letters, and numbers as specified or directed by the contracting officer FOB: Destination

0049 113 Square

0004AA

:Replace existing lines with new thermoplastic compound lines (yellow or white in color) (solid or dashed).

FOB: Destination

0050 75 Each

0004AB

FFP

:Replace existing arrows, straight or curved, (white in color) with new thermoplastic compound arrows (white in color.)

FOB: Destination

0051 75 Each

0004AC

FFP

:Replace existing double arrows (white in color) with new thermoplastic compound arrows (white in color.)

FOB: Destination

0052 100 Each

0004AD

FFP

:Replace handicap symbols (color: white), approximate size 36" X 36".

FOB: Destination

0053 2,800 Linear

0004AE

:Replace existing lines with new 4" thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0054 1,500 Square

0004AF

:Removal only of existing thermoplastic markings, figures, letters, and numbers as specified and where directed by the Contracting Officer.

FOB: Destination

0055 1 Job

FFP

:Installation of pavement marking tape on new asphalt surface immediately after initial rolling. These line items are not to be used on existing asphalt surfaces.

Make necessary preparations to surface and place surface applied pavement marking tape (60 mil) for road markings, crosswalks, stop lines, figures, letters, and numbers as specified and where directed by the contracting officer.

FOB: Destination

0056 1,500 Square

0005AA

:Place lines (white or yellow in color) on various roads.

FOB: Destination

0057 150 Each

0005AB

FFP

:Arrows (straight or curved), white in color, on various roads.

FOB: Destination

0058 150 Each

0005AC

FFP

:Double arrows (white in color) on various roads.

FOB: Destination

0059 100 Each

0005AD

FFP

:Handicap symbols (white in color), approximate size 36" X 36".

FOB: Destination

0060 550 Each

0005AE

FFP

:4" line markings (yellow or white in color) on various roads.

FOB: Destination

0061 100 Each

0005AF

FFP

:Construct reflective pavement markers to existing asphalt surface. Mill existing asphalt surfacing with a 5" wide by 2'-10" long strip spaced at 30'-0" center to center. Install epoxy fully adhered white or yellow reflective pavement markers, one at each end, as specified and where directed by the Contracting Officer. (Price per groove including 1 marker.)

FOB: Destination

0062 1 Job

FFP

:Construct new concrete storm drainage pipe up to 16 feet deep. Use Reinforced Concrete Pipe, Class 3 with gaskets. Include elbows, flared ends, and mastic/rubber joints as required. Work includes excavation, removal of existing pipe if necessary, bedding material, pipe installation, connection to manholes, backfilling, and compaction.

FOB: Destination

0063 750 Linear

0006AA

:New 12ƒ?? diameter pipe FOB: Destination

0064 550 Linear

0006AB

:New 15ƒ?? diameter pipe FOB: Destination

0065 550 Linear

0006AC

:New 18ƒ?? diameter pipe FOB: Destination

0066 750 Linear

0006AD

:New 24ƒ?? diameter pipe FOB: Destination

0067 550 Linear

0006AE

:New 30ƒ?? diameter pipe FOB: Destination

0068 750 Linear

0006AF

:New 36ƒ?? diameter pipe FOB: Destination

0069 250 Linear

0006AG

:New 48ƒ?? diameter pipe FOB: Destination

0070 250 Linear

0006AH

:New 29ƒ??x 45ƒ?? elliptical reinforced concrete pipe FOB: Destination

0071 250 Linear

0006AJ

:New 38ƒ??x 60ƒ?? elliptical reinforced concrete pipe FOB: Destination

0072 250 Linear

0006AK

:New 48ƒ??x 76ƒ?? elliptical reinforced concrete pipe FOB: Destination

0073 1 Job

FFP

:Construct new plastic storm drainage pipe up to 16 feet deep. Use Corrugated HDPE Type S bell & spigot pipes, with gaskets. Include bends, elbows, tees, and couplings as required. Work includes excavation, removal of existing pipe if necessary, bedding material, pipe installation, connection to manholes, backfilling, and compaction.

FOB: Destination

0074 750 Linear

0007AA

:New 12ƒ?? diameter pipe FOB: Destination

0075 550 Linear

0007AB

:New 15ƒ?? diameter pipe FOB: Destination

0076 550 Linear

0007AC

:New 18ƒ?? diameter pipe FOB: Destination

0077 750 Linear

0007AD

:New 24ƒ?? diameter pipe FOB: Destination

0078 550 Linear

0007AE

:New 30ƒ?? diameter pipe FOB: Destination

0079 550 Linear

0007AF

:New 36ƒ?? diameter pipe FOB: Destination

0080 550 Linear

0007AG

:New 48ƒ?? diameter pipe FOB: Destination

0081 1 Job

FFP

:Construct various components of new steel reinforced fence with stainless steel fasteners as required. Work includes excavations, bedding material, compaction, backfilling, and pavement patching, as necessary FOB: Destination

0082 900 Linear

0008AA

:6' chain link fence FOB: Destination

0083 900 Linear

0008AB

:8' chain link fence FOB: Destination

0084 15 Each

0008AC

FFP

:6' gate, 3' wide FOB: Destination

0085 15 Each

0008AD

FFP

:6' gate, 12' wide FOB: Destination

0086 15 Each

0008AE

FFP

:8' gate, 12' wide FOB: Destination

0087 1 Job

FFP

:Construct various components of guardrail. Work includes excavations, bedding material, compaction, backfilling, pavement patching, and site restoration, as required. (See also VDOT Road and Bridge Standards).

FOB: Destination

0088 900 Linear

0009AA

:Standard block-out W beam guardrail (Strog Post System, VDOT GR-2) FOB: Destination

0089 900 Linear

0009AB

:Cable Guardrail (VDOT GR-3) FOB: Destination

0090 19 Each

0009AC

FFP

:Breakaway Cable Terminal (VDOT GR-7) FOB: Destination

0091 19 Each

0009AD

FFP

:W-Beam Guardrail-Fixed Object Attachment (VDOT GR-FOA-1) FOB: Destination

0092 10 Acre

0009AE

FFP

:Clearing and Chipping (1) acre of land FOB: Destination

0093 2,000 Each

0009AF

FFP

:Concrete Jersey Barrier FOB: Destination

0094 800 Cubic

0009AG

:Removal of existing asphalt concrete pavement by either cold-milling or heater planning FOB: Destination

0095 100 Cubic

0009AH

:Remove existing deteriorated asphalt concrete down to existing concrete base course FOB: Destination

0096 10 Each

0009AJ

FFP

:Provide surveying, engineering, and permitting when required FOB: Destination

0097 1 Job

FFP

:Erosion and Sediment Controls FOB: Destination

0098 2,000 Square

0010AA

:Construct heavy duty embankment stabilization fabric FOB: Destination

0099 700 Cubic

0010AB

:Construct select-material subbase course FOB: Destination

0100 2,000 Square

0010AC

:Construct turf reinforcement matting FOB: Destination

0101 1 Job 1001 -Option Year 1

FFP

:Asphalt Work. FFP. The Contractor shall provide labor, materials, equipment, transportation, professional services for asphalt work to include but not limited to alteration, repairs of road paving, curb and gutter, paving of parking lots, sidewalk, running tracks, removal/application of asphalt.

FOB: Destination

0102 600 Cubic

1001AA - Removal

:Remove existing deteriorated bituminous pavement section: including wearing/binder courses, aggregate base, and subbase.

FOB: Destination

0103 600 Cubic

1001AB

:Remove existing deteriorated portland cement concrete.

FOB: Destination

0104 2,500 Cubic

1001AC

:Remove existing soil or gravel.

FOB: Destination

0105 4,500 Square

1001AD

:Rework and compact 6" base, subbase, or subgrade FOB: Destination

0106 2,500 Linear

1001AE

:Clean cracks and joints in asphaltic concrete, and seal with the required crack sealing materials FOB: Destination

0107 25,000 Cubic

1001AF

:Construct stabilized aggregate base course FOB: Destination

0108 10,000 Square

1001AG

:Clean and apply prime or tack coat FOB: Destination

0109 10,000 Square

1001AH

:Construct bituminous asphalt binder course compacted to 3" FOB: Destination

0110 4,000 Square

1001AJ

:Construct bituminous asphalt wearing course compacted to 2" FOB: Destination

0111 1,000 Square

1001AK

:Construct bituminous asphalt wearing course compacted to 1.5" FOB: Destination

0112 20,000 Square

1001AL

:Construct geotextile fabric FOB: Destination

0113 150 Square

1001AM

:Clean asphalt concrete and apply asphalt slurry seal on existing surface.

Minimum delivery order of at least 10,000 YD2 FOB: Destination

0114 150 Each

1001AN

FFP

:Construct new precast concrete wheel stops to match existing FOB: Destination

0115 95 Each

1001AP

FFP

:Relocate existing wheel stops.

FOB: Destination

0116 150 Cubic

1001AQ

:Construct reinforced concrete structures incidental to asphalt work as required FOB: Destination

0117 3,500 Cubic

1001AR

:Furnish and replace topsoil, fine grade.

FOB: Destination

0118 6,000 Cubic

1001AS

:Furnish and place lime, fertilizer, seed, and mulch.

FOB: Destination

0119 3,500 Cubic

1001AT

:Furnish, place, and peg sod.

FOB: Destination

0120 1,000 Square

1001AU

:Furnish fine grading.

FOB: Destination

0121 115 Square

1001AV

:Remove existing top of manhole or drop inlet; extend to new height, as required, and reinstall manhole or drop inlet to match the road surface.

FOB: Destination

0122 5,500 Square

1001AW

:Remove existing valve boxes or fuel tank fill boxes, as required, to match flush with road surface.

FOB: Destination

0123 5,000 Each

1001AX

FFP

:Replace traffic light activator loops, as required. Sawcut 2" in depth and seal with a weatherproof epoxy resin sealer in the area depicted for installation of #14 AWG activator loop wire. This work includes pulling wire through conduit, all service connections, and required testing.

FOB: Destination

0124 1,000 Each

1001AY

FFP

:Remove existing painted line markings, figures, letters, and numbers FOB: Destination

0125 1 Linear

:Paint line markings, figures, and letters as specified or directed by the contracting officer. Make necessary surface preparations. (Note: All letters and numbers to be painted fully closed).

FOB: Destination

0126 75,000 Linear

1002AA

:4" solid line markings (yellow or white in color) on various roads.

FOB: Destination

0127 113 Linear

1002AB

:4" broken line markings (yellow or white in color) on various roads.

FOB: Destination

0128 75 Each

1002AC

FFP

:Straight or curved arrows (white in color) on various roads.

FOB: Destination

0129 75 Each

1002AD

FFP

:Double arrows (white in color) on various roads.

FOB: Destination

0130 75 Each

1002AE

FFP

:PED-X letters (white in color) on various roads.

FOB: Destination

0131 75 Each

1002AF

FFP

:STOP letters (white in color) on various roads.

FOB: Destination

0132 1,100 Each

1002AG

FFP

:ONLY letters (white in color) on various roads.

FOB: Destination

0133 75 Linear

1002AH

:12" crossing walk lines (white in color) on various roads.

FOB: Destination

0134 75 Linear

1002AJ

:18" stop lines (white in color) on various roads.

FOB: Destination

0135 95 Linear

1002AK

:4" slant lines (white or yellow in color) on various roads.

FOB: Destination

0136 95 Each

1002AL

FFP

:14" letters and numbers (white in color) to match existing letters.

FOB: Destination

0137 50 Each

1002AM

FFP

:10" letters and numbers (white in color).

FOB: Destination

0138 375 Each

1002AN

FFP

:6" and 4" letters and numbers (colors: yellow, white, red, green, or black.)

FOB: Destination

0139 375 Linear

1002AP

:Curbing (colors: yellow, white, red, green, or black) to include vegetation removal as required.

FOB: Destination

0140 3,500 Each

1002AQ

FFP

:Handicap symbols (color: white) approximate size 36" X 36".

FOB: Destination

0141 3,000 Square

1002AR

:Line markings (yellow or white in color) on various roads.

FOB: Destination

0142 1 Job

FFP

:Make necessary surface preparation and construct thermoplastic markings, figures, letters, and numbers as specified or directed by the contracting officer. (Note: All line markings, figures, numbers, and letters under the following number items shall be laid out by the contractor).

FOB: Destination

0143 1,875 Square

1003AA

:New thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0144 75 Each

1003AB

FFP

:New thermoplastic compound arrows (straight or curved), white in color.

FOB: Destination

0145 75 Each

1003AC

FFP

:New thermoplastic compound double arrows (white in color).

FOB: Destination

0146 94 Each

1003AD

FFP

:New handicap symbols (color: white), approximate size 36" X 36".

FOB: Destination

0147 75,000 Linear

1003AE

:New 4" thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0148 1 Job

FFP

:Make necessary surface preparation and construct thermoplastic markings, figures, letters, and numbers as specified or directed by the contracting officer FOB: Destination

0149 113 Square

1004AA

:Replace existing lines with new thermoplastic compound lines (yellow or white in color) (solid or dashed).

FOB: Destination

0150 75 Each

1004AB

FFP

:Replace existing arrows, straight or curved, (white in color) with new thermoplastic compound arrows (white in color.)

FOB: Destination

0151 75 Each

1004AC

FFP

:Replace existing double arrows (white in color) with new thermoplastic compound arrows (white in color.)

FOB: Destination

0152 100 Each

1004AD

FFP

:Replace handicap symbols (color: white), approximate size 36" X 36".

FOB: Destination

0153 2,800 Linear

1004AE

:Replace existing lines with new 4" thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0154 1,500 Square

1004AF

:Removal only of existing thermoplastic markings, figures, letters, and numbers as specified and where directed by the Contracting Officer.

FOB: Destination

0155 1 Job

FFP

:Installation of pavement marking tape on new asphalt surface immediately after initial rolling. These line items are not to be used on existing asphalt surfaces.

Make necessary preparations to surface and place surface applied pavement marking tape (60 mil) for road markings, crosswalks, stop lines, figures, letters, and numbers as specified and where directed by the contracting officer.

FOB: Destination

0156 1,500 Square

1005AA

:Place lines (white or yellow in color) on various roads.

FOB: Destination

0157 150 Each

1005AB

FFP

:Arrows (straight or curved), white in color, on various roads.

FOB: Destination

0158 150 Each

1005AC

FFP

:Double arrows (white in color) on various roads.

FOB: Destination

0159 100 Each

1005AD

FFP

:Handicap symbols (white in color), approximate size 36" X 36".

FOB: Destination

0160 550 Each

1005AE

FFP

:4" line markings (yellow or white in color) on various roads.

FOB: Destination

0161 100 Each

1005AF

FFP

:Construct reflective pavement markers to existing asphalt surface. Mill existing asphalt surfacing with a 5" wide by 2'-10" long strip spaced at 30'-0" center to center. Install epoxy fully adhered white or yellow reflective pavement markers, one at each end, as specified and where directed by the Contracting Officer. (Price per groove including 1 marker.)

FOB: Destination

0162 1 Job

FFP

:Construct new concrete storm drainage pipe up to 16 feet deep. Use Reinforced Concrete Pipe, Class 3 with gaskets. Include elbows, flared ends, and mastic/rubber joints as required. Work includes excavation, removal of existing pipe if necessary, bedding material, pipe installation, connection to manholes, backfilling, and compaction.

FOB: Destination

0163 750 Linear

1006AA

:New 12ƒ?? diameter pipe FOB: Destination

0164 550 Linear

1006AB

:New 15ƒ?? diameter pipe FOB: Destination

0165 550 Linear

1006AC

:New 18ƒ?? diameter pipe FOB: Destination

0166 750 Linear

1006AD

:New 24ƒ?? diameter pipe FOB: Destination

0167 550 Linear

1006AE

:New 30ƒ?? diameter pipe FOB: Destination

0168 750 Linear

1006AF

:New 36ƒ?? diameter pipe FOB: Destination

0169 250 Linear

1006AG

:New 48ƒ?? diameter pipe FOB: Destination

0170 250 Linear

1006AH

:New 29ƒ??x 45ƒ?? elliptical reinforced concrete pipe FOB: Destination

0171 250 Linear

1006AJ

:New 38ƒ??x 60ƒ?? elliptical reinforced concrete pipe FOB: Destination

0172 250 Linear

1006AK

:New 48ƒ??x 76ƒ?? elliptical reinforced concrete pipe FOB: Destination

0173 1 Job

FFP

:Construct new plastic storm drainage pipe up to 16 feet deep. Use Corrugated HDPE Type S bell & spigot pipes, with gaskets. Include bends, elbows, tees, and couplings as required. Work includes excavation, removal of existing pipe if necessary, bedding material, pipe installation, connection to manholes, backfilling, and compaction.

FOB: Destination

0174 750 Linear

1007AA

:New 12ƒ?? diameter pipe FOB: Destination

0175 550 Linear

1007AB

:New 15ƒ?? diameter pipe FOB: Destination

0176 550 Linear

1007AC

:New 18ƒ?? diameter pipe FOB: Destination

0177 750 Linear

1007AD

:New 24ƒ?? diameter pipe FOB: Destination

0178 550 Linear

1007AE

:New 30ƒ?? diameter pipe FOB: Destination

0179 550 Linear

1007AF

:New 36ƒ?? diameter pipe FOB: Destination

0180 550 Linear

1007AG

:New 48ƒ?? diameter pipe FOB: Destination

0181 1 Job

FFP

:Construct various components of new steel reinforced fence with stainless steel fasteners as required. Work includes excavations, bedding material, compaction, backfilling, and pavement patching, as necessary FOB: Destination

0182 900 Linear

1008AA

:6' chain link fence FOB: Destination

0183 900 Linear

1008AB

:8' chain link fence FOB: Destination

0184 15 Each

1008AC

FFP

:6' gate, 3' wide FOB: Destination

0185 15 Each

1008AD

FFP

:6' gate, 12' wide FOB: Destination

0186 15 Each

1008AE

FFP

:8' gate, 12' wide FOB: Destination

0187 1 Job

FFP

:Construct various components of guardrail. Work includes excavations, bedding material, compaction, backfilling, pavement patching, and site restoration, as required. (See also VDOT Road and Bridge Standards).

FOB: Destination

0188 900 Linear

1009AA

:Standard block-out W beam guardrail (Strog Post System, VDOT GR-2) FOB: Destination

0189 900 Linear

1009AB

:Cable Guardrail (VDOT GR-3) FOB: Destination

0190 19 Each

1009AC

FFP

:Breakaway Cable Terminal (VDOT GR-7) FOB: Destination

0191 19 Each

1009AD

FFP

:W-Beam Guardrail-Fixed Object Attachment (VDOT GR-FOA-1) FOB: Destination

0192 10 Acre

1009AE

FFP

:Clearing and Chipping (1) acre of land FOB: Destination

0193 2,000 Each

1009AF

FFP

:Concrete Jersey Barrier FOB: Destination

0194 800 Cubic

1009AG

:Removal of existing asphalt concrete pavement by either cold-milling or heater planning FOB: Destination

0195 100 Cubic

1009AH

:Remove existing deteriorated asphalt concrete down to existing concrete base course FOB: Destination

0196 10 Each

1009AJ

FFP

:Provide surveying, engineering, and permitting when required FOB: Destination

0197 1 Job

FFP

:Erosion and Sediment Controls FOB: Destination

0198 2,000 Square

1010AA

:Construct heavy duty embankment stabilization fabric FOB: Destination

0199 700 Cubic

1010AB

:Construct select-material subbase course FOB: Destination

0200 2,000 Square

1010AC

:Construct turf reinforcement matting FOB: Destination

0201 1 Job 2001 -Option Year 2

FFP

:Asphalt Work. FFP. The Contractor shall provide labor, materials, equipment, transportation, professional services for asphalt work to include but not limited to alteration, repairs of road paving, curb and gutter, paving of parking lots, sidewalk, running tracks, removal/application of asphalt.

FOB: Destination

0202 600 Cubic

2001AA - Removal

:Remove existing deteriorated bituminous pavement section: including wearing/binder courses, aggregate base, and subbase.

FOB: Destination

0203 600 Cubic

2001AB

:Remove existing deteriorated portland cement concrete.

FOB: Destination

0204 2,500 Cubic

2001AC

:Remove existing soil or gravel.

FOB: Destination

0205 4,500 Square

2001AD

:Rework and compact 6" base, subbase, or subgrade FOB: Destination

0206 2,500 Linear

2001AE

:Clean cracks and joints in asphaltic concrete, and seal with the required crack sealing materials FOB: Destination

0207 25,000 Cubic

2001AF

:Construct stabilized aggregate base course FOB: Destination

0208 10,000 Square

2001AG

:Clean and apply prime or tack coat FOB: Destination

0209 10,000 Square

2001AH

:Construct bituminous asphalt binder course compacted to 3" FOB: Destination

0210 4,000 Square

2001AJ

:Construct bituminous asphalt wearing course compacted to 2" FOB: Destination

0211 1,000 Square

2001AK

:Construct bituminous asphalt wearing course compacted to 1.5" FOB: Destination

0212 20,000 Square

2001AL

:Construct geotextile fabric FOB: Destination

0213 150 Square

2001AM

:Clean asphalt concrete and apply asphalt slurry seal on existing surface.

Minimum delivery order of at least 10,000 YD2 FOB: Destination

0214 150 Each

2001AN

FFP

:Construct new precast concrete wheel stops to match existing FOB: Destination

0215 95 Each

2001AP

FFP

:Relocate existing wheel stops.

FOB: Destination

0216 150 Cubic

2001AQ

:Construct reinforced concrete structures incidental to asphalt work as required FOB: Destination

0217 3,500 Cubic

2001AR

:Furnish and replace topsoil, fine grade.

FOB: Destination

0218 6,000 Cubic

2001AS

:Furnish and place lime, fertilizer, seed, and mulch.

FOB: Destination

0219 3,500 Cubic

2001AT

:Furnish, place, and peg sod.

FOB: Destination

0220 1,000 Square

2001AU

:Furnish fine grading.

FOB: Destination

0221 115 Square

2001AV

:Remove existing top of manhole or drop inlet; extend to new height, as required, and reinstall manhole or drop inlet to match the road surface.

FOB: Destination

0222 5,500 Square

2001AW

:Remove existing valve boxes or fuel tank fill boxes, as required, to match flush with road surface.

FOB: Destination

0223 5,000 Each

2001AX

FFP

:Replace traffic light activator loops, as required. Sawcut 2" in depth and seal with a weatherproof epoxy resin sealer in the area depicted for installation of #14 AWG activator loop wire. This work includes pulling wire through conduit, all service connections, and required testing.

FOB: Destination

0224 1,000 Each

2001AY

FFP

:Remove existing painted line markings, figures, letters, and numbers FOB: Destination

0225 1 Linear

:Paint line markings, figures, and letters as specified or directed by the contracting officer. Make necessary surface preparations. (Note: All letters and numbers to be painted fully closed).

FOB: Destination

0226 75,000 Linear

2002AA

:4" solid line markings (yellow or white in color) on various roads.

FOB: Destination

0227 113 Linear

2002AB

:4" broken line markings (yellow or white in color) on various roads.

FOB: Destination

0228 75 Each

2002AC

FFP

:Straight or curved arrows (white in color) on various roads.

FOB: Destination

0229 75 Each

2002AD

FFP

:Double arrows (white in color) on various roads.

FOB: Destination

0230 75 Each

2002AE

FFP

:PED-X letters (white in color) on various roads.

FOB: Destination

0231 75 Each

2002AF

FFP

:STOP letters (white in color) on various roads.

FOB: Destination

0232 1,100 Each

2002AG

FFP

:ONLY letters (white in color) on various roads.

FOB: Destination

0233 75 Linear

2002AH

:12" crossing walk lines (white in color) on various roads.

FOB: Destination

0234 75 Linear

2002AJ

:18" stop lines (white in color) on various roads.

FOB: Destination

0235 95 Linear

2002AK

:4" slant lines (white or yellow in color) on various roads.

FOB: Destination

0236 95 Each

2002AL

FFP

:14" letters and numbers (white in color) to match existing letters.

FOB: Destination

0237 50 Each

2002AM

FFP

:10" letters and numbers (white in color).

FOB: Destination

0238 375 Each

2002AN

FFP

:6" and 4" letters and numbers (colors: yellow, white, red, green, or black.)

FOB: Destination

0239 375 Linear

2002AP

:Curbing (colors: yellow, white, red, green, or black) to include vegetation removal as required.

FOB: Destination

0240 3,500 Each

2002AQ

FFP

:Handicap symbols (color: white) approximate size 36" X 36".

FOB: Destination

0241 3,000 Square

2002AR

:Line markings (yellow or white in color) on various roads.

FOB: Destination

0242 1 Job

FFP

:Make necessary surface preparation and construct thermoplastic markings, figures, letters, and numbers as specified or directed by the contracting officer. (Note: All line markings, figures, numbers, and letters under the following number items shall be laid out by the contractor).

FOB: Destination

0243 1,875 Square

2003AA

:New thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0244 75 Each

2003AB

FFP

:New thermoplastic compound arrows (straight or curved), white in color.

FOB: Destination

0245 75 Each

2003AC

FFP

:New thermoplastic compound double arrows (white in color).

FOB: Destination

0246 94 Each

2003AD

FFP

:New handicap symbols (color: white), approximate size 36" X 36".

FOB: Destination

0247 75,000 Linear

2003AE

:New 4" thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0248 1 Job

FFP

:Make necessary surface preparation and construct thermoplastic markings, figures, letters, and numbers as specified or directed by the contracting officer FOB: Destination

0249 113 Square

2004AA

:Replace existing lines with new thermoplastic compound lines (yellow or white in color) (solid or dashed).

FOB: Destination

0250 75 Each

2004AB

FFP

:Replace existing arrows, straight or curved, (white in color) with new thermoplastic compound arrows (white in color.)

FOB: Destination

0251 75 Each

2004AC

FFP

:Replace existing double arrows (white in color) with new thermoplastic compound arrows (white in color.)

FOB: Destination

0252 100 Each

2004AD

FFP

:Replace handicap symbols (color: white), approximate size 36" X 36".

FOB: Destination

0253 2,800 Linear

2004AE

:Replace existing lines with new 4" thermoplastic compound lines (yellow or white in color), solid or dashed.

FOB: Destination

0254 1,500 Square

2004AF

:Removal only of existing thermoplastic markings, figures, letters, and numbers as specified and where directed by the Contracting Officer.

FOB: Destination

0255 1 Job

FFP

:Installation of pavement marking tape on new asphalt surface immediately after initial rolling. These line items are not to be used on existing asphalt surfaces.

Make necessary preparations to surface and place surface applied pavement marking tape (60 mil) for road markings, crosswalks, stop lines, figures, letters, and numbers as specified and where directed by the contracting officer.

FOB: Destination

0256 1,500 Square

2005AA

:Place lines (white or yellow in color) on various roads.

FOB: Destination

0257 150 Each

2005AB

FFP

:Arrows (straight or curved), white in color, on various roads.

FOB: Destination

0258 150 Each

2005AC

FFP

:Double arrows (white in color) on various roads.

FOB: Destination

0259 100 Each

2005AD

FFP

:Handicap symbols (white in color), approximate size 36" X 36".

FOB: Destination

0260 550 Each

2005AE

FFP

:4" line markings (yellow or white in color) on various roads.

FOB: Destination

0261 100 Each

2005AF

FFP

:Construct reflective pavement markers to existing asphalt surface. Mill existing asphalt surfacing with a 5" wide by 2'-10" long strip spaced at 30'-0" center to center. Install epoxy fully adhered white or yellow reflective pavement markers, one at each end, as specified and where directed by the Contracting Officer. (Price per groove including 1 marker.)

FOB: Destination

0262 1 Job

FFP

:Construct new concrete storm drainage pipe up to 16 feet deep. Use Reinforced Concrete Pipe, Class 3 with gaskets. Include elbows, flared ends, and mastic/rubber joints as required. Work includes excavation, removal of existing pipe if necessary, bedding material, pipe installation, connection to manholes, backfilling, and compaction.

FOB: Destination

0263 750 Linear

2006AA

:New 12ƒ?? diameter pipe FOB: Destination

0264 550 Linear

2006AB

:New 15ƒ?? diameter pipe FOB: Destination

0265 550 Linear

2006AC

:New 18ƒ?? diameter pipe FOB: Destination

0266 750 Linear

2006AD

:New 24ƒ?? diameter pipe FOB: Destination

0267 550 Linear

2006AE

:New 30ƒ?? diameter pipe FOB: Destination

0268 750 Linear

2006AF

:New 36ƒ?? diameter pipe FOB: Destination

0269 250 Linear

2006AG

:New 48ƒ?? diameter pipe FOB: Destination

0270 250 Linear

2006AH

:New 29ƒ??x 45ƒ?? elliptical reinforced concrete pipe FOB: Destination

0271 250 Linear

2006AJ

:New 38ƒ??x 60ƒ?? elliptical reinforced concrete pipe FOB: Destination

0272 250 Linear

2006AK

:New 48ƒ??x 76ƒ?? elliptical reinforced concrete pipe FOB: Destination

0273 1 Job

FFP

:Construct new plastic storm drainage pipe up to 16 feet deep. Use Corrugated HDPE Type S bell & spigot pipes, with gaskets. Include bends, elbows, tees, and couplings as required. Work includes excavation, removal of existing pipe if necessary, bedding material, pipe installation, connection to manholes, backfilling, and compaction.

FOB: Destination

0274 750 Linear

2007AA

:New 12ƒ?? diameter pipe FOB: Destination

0275 550 Linear

2007AB

:New 15ƒ?? diameter pipe FOB: Destination

0276 550 Linear

2007AC

:New 18ƒ?? diameter pipe FOB: Destination

0277 750 Linear

2007AD

:New 24ƒ?? diameter pipe FOB: Dest