ATTACHMENT_6_-_SCHEDULE_OF_SUPPLIES_AND_SERVICES_(FULL).pdf

SCHEDULE OF SUPPLIES OR SERVICES

0001 SCHEDULE I - OUTBOUND SERVICES.

Base Year: 1 January - 31 December 2018

0001AA Complete Service – Outbound (HHGs). Services shall include premove survey, servicing of appliances, disassembly of furniture, if required, packaging, inventorying, tagging, wrapping, padding, packing and bracing of household goods in Government owned and furnished shipping containers (Shipping container Commercial Spec ASTM-D4169-01, SDDC Pam 55-12) at owner’s residence, or at Contractor’s facility when ordered by the Ordering Officer, properly securing and sealing for shipment, weighing, obliterating old markings, strapping, and drayage of the container within an area of performance. Service shall also include loading of shipments on line-haul carrier’s equipment at the contractor’s facility. When containers will not accommodate all articles of any one lot, loose articles shall be packed in the said containers before any over-packed articles are placed therein. Overflow, oversize and other shipments shall be paid for under Item 0001AC.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. At Owner’s Residence: 58 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

B. At Contractor’s Facility 10 NCWT Container, Commercial Spec

ASTM-D4169-01, or SDDC Pam 55-12

Area II:

A. At Owner’s Residence: 5 NCWT

Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

B. At Contractor’s Facility 5 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

0001AB Outbound (HHGs From Non-Temporary Storage). Service shall be the same as Item 0001AA above except that: (a) household goods shall be picked up at a non-temporary storage facility and transported to Contractor’s facility; or (b) household goods shall be delivered to Contractor’s facility; and (c) premove survey, servicing of appliances, preliminary packing and accessorial services shall not be provided. Overflow articles requiring containerization will be paid for under Item 0001AC.

Qty Unit Price Total Area I:

A. Pickup by Contractor: 200 NCWT ASTM-D4169-01, or SDDC Pam 55-12

B. Delivered to Contractor: 10 NCWT

Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

Area II:

A. Pickup by Contractor: 20 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12 B. Delivered by Contractor: 5 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

0001AC Complete Service-Outbound (HHGs-Overflow Articles and HHGs Shipments requiring other than

ASTM-D4169-01 or SDDC Pam 55-12 containers. Service shall be the same as Items 0001AA or Item 0001AB except that the loose articles are drayed to Contractor’s facility when ordered by the Ordering Officer for containerization in Government-furnished or Contractor-furnished containers.

Overflow, other shipments and oversize containers shall be constructed IAW ASTM-D6251. Each container shall be caulked during assembly. Overflow boxes and other shipments shall be limited to one per shipment. Other shipments are small household goods shipments that normally require a lesser size box than specified in Commercial Spec ASTM-D4169-01 or SDDC Pam 55-12. Overflow containers are of a lesser size than specified in Commercial Spec ASTM-D4169-01 or SDDC Pam 55- 12 and oversized containers are always of greater size than specified in Commercial SPEC ASTM- D4169-01 or SDDC Pam 55-12. One or more these containers may be required per shipment. Price Proposed for Item 0001AC includes container plus weight of its contents.

Qty Unit Price Total Area I:

A. Government Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

B. Contractor-Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 10 NCWT

b. Oversize Articles 10 NCWT

c. Other Shipments 505 NCWT

(2) Domestic Pack:

a. Overflow Articles 10 NCWT

b. Oversize Articles 10 NCWT

c. Other Shipments 3019 NCWT Area II:

A. Government Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 5 NCWT B. Contractor-Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 70 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 323 NCWT

0001AD Complete Service – Outbound (Unaccompanied Baggage). Service includes packaging, inventorying, packing in Government approved container, weighing, strapping, obliteration of old markings, marking, and loading shipments on the line-haul carrier’s equipment. Service shall be performed at owner’s residence. (Service may be performed at Contractor’s facility when ordered by the Ordering Officer.)

Qty Unit Price Total Area I:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 618 NCWT

Area II:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 52 NCWT

0001AE Complete Service – Outbound (Unaccompanied Baggage from Non-temporary Storage). Service shall be the same as Item 0004, except that (a) unaccompanied baggage shall be picked up at a non-temporary storage facility and transported to Contractor’s facility; or (b) unaccompanied baggage shall be delivered to Contractor’s facility; and (c) servicing of appliances, preliminary packing and accessorial services shall not be provided.

Qty Unit Price Total

Area I:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 5 NCWT Area II:

A. Government Furnished Containers:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT Containers:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT 0001AF Outbound Service – Unaccompanied Baggage Packed by Owner. Service shall include weighing, strapping, banding, obliterating old markings, and marking. Service may include (when necessary) containerization in outer shipping containers as ordered by the Ordering Officer.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Containerization Not Required:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Containerization Required:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT

Area II:

A. Containerization Not Required:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT B. Containerization Required:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT

0001AG Outbound Service – Unaccompanied Baggage Packed by Owner Consolidated Shipments/ Government

Facility. Service shall be the same as Item 0001AF above, except that service shall include two or more shipments picked up from a Government office, warehouse or facility.

Qty Unit Price Total Area I:

A. Containerization Not Required:

(Drayage Included) 10 NCWT B. Containerization Required:

(Drayage Included) 5 NCWT

Area II:

A. Containerization Not Required:

(Drayage Included) 2 GCWT B. Containerization Required:

(Drayage Included) 2 NCWT

0001AH Expensive and Valuable Items. Service shall include inventorying each item, packing in Government approved, Contractor-furnished container(s), marking, banding and cubing at owner’s residence. Drayage if required, will be ordered by the Ordering Officer. If drayage is required, weighing shall be done on properly certified scales and certified weight ticket shall be furnished. If drayage is not required, weighing shall be done at owner's residence on portable or bathroom scales. In jurisdictions where local law prohibits the certification or portable scales, a weight certificate will not be required. However, upon the written authority of the contracting officer, the Contractor may apply a constructive weight or 11 pounds per gross cubic foot of the container.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Drayage Included 5 NCWT B. Drayage Not Included 5 NCWT

Area II:

A. Drayage Included 2 GCWT B. Drayage Not Included 2 GCWT 0001AJ Storage. Storage of containerized articles shall be furnished when ordered by Ordering Officer. Charges shall not commence earlier than the sixth (6th) workday following date of the Transportation Officer’s receipt of notification of completion of containerization service. Storage charges apply for each 30-day period or fraction thereof. Date of release from storage shall not be considered in computation of storage charges.

Est Annual Unit Estimated Qty Unit Price Total

Area I: 5 NCWT Area II: 5 NCWT

0001AK Containers. Service shall consist of the furnishing of the following types of new containers or specially constructed wooden crates. Containers furnished or specially constructed are to be assembled and ready for loading.

When a specific container from the SDDC Pam 55-12 is ordered, the order will indicate the SDDC approved number.

Qty Unit Price Total Area I:

A. Container 5 ea

(ASTM-D4169-01)

B. Container 5 ea (SDDC Pam 55-12) C. Crate (ASTM-D6039/D6039M-02) 5 cu ft of fraction thereof

A. Container 2 ea

(ASTM-D4169-01)

B. Container 2 ea (SDDC Pam 55-12) C. Crate (ASTM-D6039/D6039M-02) 5 cu ft of fraction

0001AL Remarking, Coopering and Assembly/Disassembly Service.

A. Remarking of Shipping for Reconsignment. Service shall consist of obliteration of all old marking, stenciling of necessary information on loaded shipping containers scheduled for reconsignment and loading on the hauling carrier’s vehicle.

Qty Unit Price Total

Area I: 10 ea pc

Area II: 5 ea pc

B. Coopering. Service shall consist of repair of containers not to exceed 30% of total area of shipping container or cost of repairs will not exceed 50% of the container replacement cost. Minor repair, such as replacement of bolts, nails and bands shall be accomplished at no expense to the Government.

Qty Unit Price Total

C. Assembly/disassembly of Government – Owned Containers. Contractor will assemble Government-owned containers. Component parts will be furnished by the Government. Contractor will disassemble Government-owned containers. Component parts will be put into a cloth bag and attached to the container.

Knocked down container sections will be banded.

Qty Unit Price Total Area I:

A. Assembly 10 ea B. Disassembly 10 ea

Area II:

A. Assembly 10 ea B. Disassembly 10 ea

0001AM Drayage Beyond the Contract Area of Performance. Service shall consist of drayage of packed shipments beyond the contract area of performance, not to exceed 150 miles. Mileage shall be computed on the shortest highway distance commencing with the applicable point to the outer boundary of the contract area of performance.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Household Goods 5 per Loaded Mile B. Unaccompanied Baggage 5 Per Loaded Mile

Area II:

A. Household Goods 5 per Loaded Mile B. Unaccompanied Baggage 5 Per Loaded Mile

0001AN Attempted Pickup. When the initial attempt to pickup a shipment at the owner’s residence is unsuccessful, charges apply provided the Contractor notified the Ordering Officer via telephone and provided that after Contractor’s notification, the Ordering Officer (a) cannot locate the owner within 30 minutes, (b) cannot have the owner at the residence within one hour after notification, and (c) the Contractor left a notice of attempted pickup at the residence.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Household Goods 10 ea shpmt B. Unaccompanied Baggage 10 ea shpmt

Area II:

A. Household Goods 10 ea shpmt B. Unaccompanied Baggage 10 ea shpmt

0001AP Additional Services. The contractor must provide additional services not included in the schedule, but required for satisfactory completion of the services ordered under this contract, at a rate comparable to the rate for like services as contained in tenders on file with the state regulatory bodies or SDDC, in effect at the time of the order. (See definition titled Additional Services, following Item 0004)

RECAPITULATION SCHEDULE I

Schedule Total: - $ Area II:

Schedule Total: - $

Unit Price Total

0004 CONTRACTOR MANPOWER REPORTING 1 EACH

The Contractor is required to enter data into the Contractor Manpower Reporting (CMR) system as defined in

Section 5 of the PWS. Reporting period will be the period of performance not to exceed 12 months ending September 30 of each Government fiscal year and must be reported by 31 October of each calendar year. Data must be accurate and complete and entered into CMR during the data gathering period of every year, or part of a year, for which the contract is in force. NOTE: If the reporting of Manpower Equivalents is not separately priced, insert "NSP" in the blank shown.

ADDITIONAL SERVICES

NOTE: Additional services listed below are those services which require performance above the normal scope of the contract; all other services required for performance of the contract shall be included in the single factor proposed price. The Government will pay the rates for additional services not to exceed the rates shown in Domestic Rate Personal Property Solicitation D-19 effective 1 November 2010 or as changed by new rate solicitation.

a. Extra Pickup/Delivery.

b. Carrying of Piano/Organ:

Handling Charge (Pianos, Organs in excess of 38 inches in Height)

Handling Change (Pianos, Organs 38 Inches or Less in Height)

Flight Carry Charge Inside a single family dwelling First flight (One floor to next floor)

Each additional flight

NOTE: The first flight shall consist of at least eight steps. Additional flights are the number of complete flights or floors above or below the first flight.

c. Auxiliary Services:

Per additional vehicle

Labor Charge per person

d. Disassembly/assembly of wall unit.

e. Hoisting of articles.

Labor Charge per Person

NOTE: Line Items Numbered 0001AL(b) – Determination of repair is made as a result of on-site inspection of containers and the issuance of a call order authorizing the service by the ordering officer.

ESTIMATED QUANTITIES

The quantities shown by area of performance for each item in this Solicitation are the Government’s estimates of requirements which may be ordered during the period of the contract.

The Government’s estimated maximum daily requirements, excluding Saturday, Sunday and National, State, and local holidays are listed below by area of performance within each schedule. Offerors must complete the “Offeror's Guaranteed Maximum Daily Capability” which must equal or exceed the Government’s minimum acceptable daily capability, for all areas of performance for which they submit proposals.

Government’s Offeror's Government’s Minimum Guaranteed Est Maximum Acceptable Maximum Daily Daily Daily Requirement Capability Capability

Outbound (Schedule I) NCWT 600 NCWT 500 NCWT 600

Outbound (Schedule I) NCWT 350 NCWT 300 NCWT 350

1001 SCHEDULE I - OUTBOUND SERVICES.

Option Year 1: 1 January - 31 December 2019

1001AA Complete Service – Outbound (HHGs). Services shall include premove survey, servicing of appliances, disassembly of furniture, if required, packaging, inventorying, tagging, wrapping, padding, packing and bracing of household goods in Government owned and furnished shipping containers (Shipping container Commercial Spec ASTM-D4169-01, SDDC Pam 55-12) at owner’s residence, or at Contractor’s facility when ordered by the Ordering Officer, properly securing and sealing for shipment, weighing, obliterating old markings, strapping, and drayage of the container within an area of performance. Service shall also include loading of shipments on line-haul carrier’s equipment at the contractor’s facility. When containers will not accommodate all articles of any one lot, loose articles shall be packed in the said containers before any over-packed articles are placed therein. Overflow, Qty Unit Price Total Area I:

A. At Owner’s Residence: 58 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

B. At Contractor’s Facility 10 NCWT Container, Commercial Spec

ASTM-D4169-01, or SDDC Pam 55-12

Area II:

A. At Owner’s Residence: 5 NCWT

Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

B. At Contractor’s Facility 5 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

1001AB Outbound (HHGs From Non-Temporary Storage). Service shall be the same as Item 0001AA above except that: (a) household goods shall be picked up at a non-temporary storage facility and transported to Contractor’s facility; or (b) household goods shall be delivered to Contractor’s facility; and (c)

Qty Unit Price Total Area I:

A. Pickup by Contractor: 200 NCWT ASTM-D4169-01, or SDDC Pam 55-12

B. Delivered to Contractor: 10 NCWT

A. Pickup by Contractor: 20 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12 B. Delivered by Contractor: 5 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

1001AC Complete Service-Outbound (HHGs-Overflow Articles and HHGs Shipments requiring other than

ASTM-D4169-01 or SDDC Pam 55-12 containers. Service shall be the same as Items 0001AA or Item 0001AB except that the loose articles are drayed to Contractor’s facility when ordered by the Ordering Officer for containerization in Government-furnished or Contractor-furnished containers.

Overflow, other shipments and oversize containers shall be constructed IAW ASTM-D6251. Each container shall be caulked during assembly. Overflow boxes and other shipments shall be limited to one per shipment. Other shipments are small household goods shipments that normally require a lesser size box than specified in Commercial Spec ASTM-D4169-01 or SDDC Pam 55-12. Overflow containers are of a lesser size than specified in Commercial Spec ASTM-D4169-01 or SDDC Pam 55- 12 and oversized containers are always of greater size than specified in Commercial SPEC ASTM-

Qty Unit Price Total Area I:

A. Government Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

B. Contractor-Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 10 NCWT

b. Oversize Articles 10 NCWT

c. Other Shipments 505 NCWT

(2) Domestic Pack:

a. Overflow Articles 10 NCWT

b. Oversize Articles 10 NCWT

c. Other Shipments 3019 NCWT Area II:

A. Government Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

c. Other Shipments 5 NCWT B. Contractor-Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 70 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 323 NCWT

1001AD Complete Service – Outbound (Unaccompanied Baggage). Service includes packaging, inventorying, packing in Government approved container, weighing, strapping, obliteration of old markings, marking, and loading shipments on the line-haul carrier’s equipment. Service shall be performed at

Qty Unit Price Total Area I:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 618 NCWT

Area II:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 52 NCWT

1001AE Complete Service – Outbound (Unaccompanied Baggage from Non-temporary Storage). Service shall be the same as Item 0004, except that (a) unaccompanied baggage shall be picked up at a non-temporary storage facility and transported to Contractor’s facility; or (b) unaccompanied baggage shall

Qty Unit Price Total Area I:

Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 5 NCWT Area II:

A. Government Furnished Containers:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT Containers:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT 1001AF Outbound Service – Unaccompanied Baggage Packed by Owner. Service shall include weighing, strapping, banding, obliterating old markings, and marking. Service may include (when necessary) containerization in outer shipping containers as ordered by the Ordering Officer.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Containerization Not Required:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Containerization Required:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT

Area II:

A. Containerization Not Required:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT B. Containerization Required:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT

1001AG Outbound Service – Unaccompanied Baggage Packed by Owner Consolidated Shipments/ Government

Qty Unit Price Total Area I:

A. Containerization Not Required:

(Drayage Included) 10 NCWT B. Containerization Required:

(Drayage Included) 5 NCWT

Area II:

Required:

(Drayage Included) 2 GCWT

(Drayage Included) 2 NCWT

1001AH Expensive and Valuable Items. Service shall include inventorying each item, packing in Government approved, Contractor-furnished container(s), marking, banding and cubing at owner’s residence. Drayage if required, will be ordered by the Ordering Officer. If drayage is required, weighing shall be done on properly certified scales and certified weight ticket shall be furnished. If drayage is not required, weighing shall be done at owner's residence on portable or bathroom scales. In jurisdictions where local law prohibits the certification or portable scales, a weight certificate will not be required. However, upon the written authority of the contracting officer, the Contractor may apply a constructive weight or 11 pounds per gross cubic foot of the container.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Drayage Included 5 NCWT B. Drayage Not Included 5 NCWT

Area II:

A. Drayage Included 2 GCWT B. Drayage Not Included 2 GCWT 1001AJ Storage. Storage of containerized articles shall be furnished when ordered by Ordering Officer. Charges shall not commence earlier than the sixth (6th) workday following date of the Transportation Officer’s receipt of notification of completion of containerization service. Storage charges apply for each 30-day period or fraction thereof. Date of release from storage shall not be considered in computation of storage charges.

Est Annual Unit Estimated Qty Unit Price Total

Area I: 5 NCWT Area II: 5 NCWT

1001AK Containers. Service shall consist of the furnishing of the following types of new containers or specially constructed wooden crates. Containers furnished or specially constructed are to be assembled and ready for loading.

When a specific container from the SDDC Pam 55-12 is ordered, the order will indicate the SDDC approved

Qty Unit Price Total Area I:

A. Container 5 ea

(ASTM-D4169-01)

B. Container 5 ea (SDDC Pam 55-12) C. Crate (ASTM-D6039/D6039M-02) 5 cu ft of fraction thereof Area II:

A. Container 2 ea

B. Container 2 ea

(SDDC Pam 55-12) C. Crate (ASTM-D6039/D6039M-02) 5 cu ft of fraction

1001AL Remarking, Coopering and Assembly/Disassembly Service.

A. Remarking of Shipping for Reconsignment. Service shall consist of obliteration of all old marking, Qty Unit Price Total

B. Coopering. Service shall consist of repair of containers not to exceed 30% of total area of shipping container or cost of repairs will not exceed 50% of the container replacement cost. Minor repair, such as

Qty Unit Price Total

Government-owned containers. Component parts will be put into a cloth bag and attached to the container.

Qty Unit Price Total Area I:

A. Assembly 10 ea B. Disassembly 10 ea

Area II:

A. Assembly 10 ea B. Disassembly 10 ea

1001AM Drayage Beyond the Contract Area of Performance. Service shall consist of drayage of packed shipments beyond the contract area of performance, not to exceed 150 miles. Mileage shall be computed on the shortest highway distance commencing with the applicable point to the outer boundary of the contract area of performance.

Qty Unit Price Total Area I:

A. Household Goods 5 per Loaded Mile B. Unaccompanied Baggage 5 Per Loaded Mile

Area II:

A. Household Goods 5 per Loaded Mile B. Unaccompanied Baggage 5 Per Loaded Mile

1001AN Attempted Pickup. When the initial attempt to pickup a shipment at the owner’s residence is unsuccessful, charges apply provided the Contractor notified the Ordering Officer via telephone and provided that after Contractor’s notification, the Ordering Officer (a) cannot locate the owner within 30 minutes, (b) cannot have the owner at the residence within one hour after notification, and (c) the Contractor left a notice of attempted pickup at the residence.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Household Goods 10 ea shpmt B. Unaccompanied Baggage 10 ea shpmt

Area II:

A. Household Goods 10 ea shpmt B. Unaccompanied Baggage 10 ea shpmt

1001AP Additional Services. The contractor must provide additional services not included in the schedule, but required for satisfactory completion of the services ordered under this contract, at a rate comparable to the rate for like services as contained in tenders on file with the state regulatory bodies or SDDC, in effect at the time of the

Schedule Total: - $ Area II:

Schedule Total: - $

Unit Price Total

1004 CONTRACTOR MANPOWER REPORTING 1 EACH

The Contractor is required to enter data into the Contractor Manpower Reporting (CMR) system as defined in Section 5 of the PWS. Reporting period will be the period of performance not to exceed 12 months ending September 30 of each Government fiscal year and must be reported by 31 October of each calendar year. Data must be accurate and complete and entered into CMR during the data gathering period of every year, or part of a year, for which the contract is in force. NOTE: If the reporting of Manpower Equivalents is not separately priced, insert

NOTE: Additional services listed below are those services which require performance above the normal scope of the contract; all other services required for performance of the contract shall be included in the single factor proposed price. The Government will pay the rates for additional services not to exceed the rates shown in Domestic Rate Personal Property Solicitation D-19 effective 1 November 2010 or as changed by new rate solicitation.

a. Extra Pickup/Delivery.

b. Carrying of Piano/Organ:

Handling Charge (Pianos, Organs in excess of 38 inches in Height)

Handling Change (Pianos, Organs 38 Inches or Less in Height)

Flight Carry Charge Inside a single family dwelling First flight (One floor to next floor)

Each additional flight

NOTE: The first flight shall consist of at least eight steps. Additional flights are the number of complete flights or floors above or below the first flight.

c. Auxiliary Services:

Per additional vehicle

Labor Charge per person

d. Disassembly/assembly of wall unit.

e. Hoisting of articles.

Labor Charge per Person

NOTE: Line Items Numbered 0001AL(b) – Determination of repair is made as a result of on-site inspection of

The quantities shown by area of performance for each item in this Solicitation are the Government’s estimates of requirements which may be ordered during the period of the contract.

The Government’s estimated maximum daily requirements, excluding Saturday, Sunday and National, State, and local holidays are listed below by area of performance within each schedule. Offerors must complete the “Offeror's Guaranteed Maximum Daily Capability” which must equal or exceed the Government’s minimum acceptable daily

Government’s Minimum Guaranteed Est Maximum Acceptable Maximum

2001 SCHEDULE I - OUTBOUND SERVICES.

Option Year 2: 1 January - 31 December 2020

2001AA Complete Service – Outbound (HHGs). Services shall include premove survey, servicing of appliances, disassembly of furniture, if required, packaging, inventorying, tagging, wrapping, padding, packing and bracing of household goods in Government owned and furnished shipping containers (Shipping container Commercial Spec ASTM-D4169-01, SDDC Pam 55-12) at owner’s residence, or at Contractor’s facility when ordered by the Ordering Officer, properly securing and sealing for shipment, weighing, obliterating old markings, strapping, and drayage of the container within an area of performance. Service shall also include loading of shipments on line-haul carrier’s equipment at the contractor’s facility. When containers will not accommodate all articles of any one lot, loose articles shall be packed in the said containers before any over-packed articles are placed therein. Overflow, Qty Unit Price Total Area I:

A. At Owner’s Residence: 58 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

B. At Contractor’s Facility 10 NCWT Container, Commercial Spec

ASTM-D4169-01, or SDDC Pam 55-12

Area II:

A. At Owner’s Residence: 5 NCWT

Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

B. At Contractor’s Facility 5 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

2001AB Outbound (HHGs From Non-Temporary Storage). Service shall be the same as Item 0001AA above except that: (a) household goods shall be picked up at a non-temporary storage facility and transported to Contractor’s facility; or (b) household goods shall be delivered to Contractor’s facility; and (c)

Qty Unit Price Total Area I:

A. Pickup by Contractor: 200 NCWT ASTM-D4169-01, or SDDC Pam 55-12

B. Delivered to Contractor: 10 NCWT

Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12 B. Delivered by Contractor: 5 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

2001AC Complete Service-Outbound (HHGs-Overflow Articles and HHGs Shipments requiring other than

ASTM-D4169-01 or SDDC Pam 55-12 containers. Service shall be the same as Items 0001AA or Item 0001AB except that the loose articles are drayed to Contractor’s facility when ordered by the Ordering Officer for containerization in Government-furnished or Contractor-furnished containers.

Overflow, other shipments and oversize containers shall be constructed IAW ASTM-D6251. Each container shall be caulked during assembly. Overflow boxes and other shipments shall be limited to one per shipment. Other shipments are small household goods shipments that normally require a lesser size box than specified in Commercial Spec ASTM-D4169-01 or SDDC Pam 55-12. Overflow containers are of a lesser size than specified in Commercial Spec ASTM-D4169-01 or SDDC Pam 55- 12 and oversized containers are always of greater size than specified in Commercial SPEC ASTM-

Qty Unit Price Total Area I:

A. Government Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

B. Contractor-Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 10 NCWT

b. Oversize Articles 10 NCWT

c. Other Shipments 505 NCWT

(2) Domestic Pack:

a. Overflow Articles 10 NCWT

b. Oversize Articles 10 NCWT

c. Other Shipments 3019 NCWT Area II:

A. Government Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

c. Other Shipments 5 NCWT B. Contractor-Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 70 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 323 NCWT

2001AD Complete Service – Outbound (Unaccompanied Baggage). Service includes packaging, inventorying, packing in Government approved container, weighing, strapping, obliteration of old markings, marking, and loading shipments on the line-haul carrier’s equipment. Service shall be performed at

Qty Unit Price Total Area I:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 618 NCWT

Area II:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 52 NCWT

2001AE Complete Service – Outbound (Unaccompanied Baggage from Non-temporary Storage). Service shall be the same as Item 0004, except that (a) unaccompanied baggage shall be picked up at a non-temporary storage facility and transported to Contractor’s facility; or (b) unaccompanied baggage shall

Qty Unit Price Total

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 5 NCWT Area II:

A. Government Furnished Containers:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT Containers:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT 2001AF Outbound Service – Unaccompanied Baggage Packed by Owner. Service shall include weighing, strapping, banding, obliterating old markings, and marking. Service may include (when necessary) containerization in outer shipping containers as ordered by the Ordering Officer.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Containerization Not Required:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Containerization Required:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT

Area II:

A. Containerization Not Required:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT B. Containerization Required:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT

2001AG Outbound Service – Unaccompanied Baggage Packed by Owner Consolidated Shipments/ Government

Qty Unit Price Total Area I:

A. Containerization Not Required:

(Drayage Included) 10 NCWT B. Containerization Required:

(Drayage Included) 5 NCWT

B. Containerization Required:

(Drayage Included) 2 NCWT

2001AH Expensive and Valuable Items. Service shall include inventorying each item, packing in Government approved, Contractor-furnished container(s), marking, banding and cubing at owner’s residence. Drayage if required, will be ordered by the Ordering Officer. If drayage is required, weighing shall be done on properly certified scales and certified weight ticket shall be furnished. If drayage is not required, weighing shall be done at owner's residence on portable or bathroom scales. In jurisdictions where local law prohibits the certification or portable scales, a weight certificate will not be required. However, upon the written authority of the contracting officer, the Contractor may apply a constructive weight or 11 pounds per gross cubic foot of the container.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Drayage Included 5 NCWT B. Drayage Not Included 5 NCWT

Area II:

A. Drayage Included 2 GCWT B. Drayage Not Included 2 GCWT 2001AJ Storage. Storage of containerized articles shall be furnished when ordered by Ordering Officer. Charges shall not commence earlier than the sixth (6th) workday following date of the Transportation Officer’s receipt of notification of completion of containerization service. Storage charges apply for each 30-day period or fraction thereof. Date of release from storage shall not be considered in computation of storage charges.

Est Annual Unit Estimated Qty Unit Price Total

Area I: 5 NCWT Area II: 5 NCWT

2001AK Containers. Service shall consist of the furnishing of the following types of new containers or specially constructed wooden crates. Containers furnished or specially constructed are to be assembled and ready for loading.

When a specific container from the SDDC Pam 55-12 is ordered, the order will indicate the SDDC approved

Qty Unit Price Total Area I:

A. Container 5 ea

(ASTM-D4169-01)

B. Container 5 ea (SDDC Pam 55-12) C. Crate (ASTM-D6039/D6039M-02) 5 cu ft of fraction thereof Area II:

A. Container 2 ea

C. Crate (ASTM-D6039/D6039M-02) 5 cu ft of fraction

2001AL Remarking, Coopering and Assembly/Disassembly Service.

A. Remarking of Shipping for Reconsignment. Service shall consist of obliteration of all old marking, Qty Unit Price Total

B. Coopering. Service shall consist of repair of containers not to exceed 30% of total area of shipping container or cost of repairs will not exceed 50% of the container replacement cost. Minor repair, such as

Qty Unit Price Total

Government-owned containers. Component parts will be put into a cloth bag and attached to the container.

Qty Unit Price Total Area I:

A. Assembly 10 ea B. Disassembly 10 ea

Area II:

A. Assembly 10 ea B. Disassembly 10 ea

2001AM Drayage Beyond the Contract Area of Performance. Service shall consist of drayage of packed shipments beyond the contract area of performance, not to exceed 150 miles. Mileage shall be computed on the shortest highway distance commencing with the applicable point to the outer boundary of the contract area of performance.

Qty Unit Price Total Area I:

A. Household Goods 5 per Loaded Mile B. Unaccompanied Baggage 5 Per Loaded Mile

Area II:

A. Household Goods 5 per Loaded Mile B. Unaccompanied Baggage 5 Per Loaded Mile

2001AN Attempted Pickup. When the initial attempt to pickup a shipment at the owner’s residence is unsuccessful, charges apply provided the Contractor notified the Ordering Officer via telephone and provided that after Contractor’s notification, the Ordering Officer (a) cannot locate the owner within 30 minutes, (b) cannot have the owner at the residence within one hour after notification, and (c) the Contractor left a notice of attempted pickup at the residence.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Household Goods 10 ea shpmt B. Unaccompanied Baggage 10 ea shpmt

Area II:

A. Household Goods 10 ea shpmt B. Unaccompanied Baggage 10 ea shpmt

2001AP Additional Services. The contractor must provide additional services not included in the schedule, but required for satisfactory completion of the services ordered under this contract, at a rate comparable to the rate for like services as contained in tenders on file with the state regulatory bodies or SDDC, in effect at the time of the

Schedule Total: - Area II:

Schedule Total: -

Unit Price Total

2004 CONTRACTOR MANPOWER REPORTING 1 EACH

The Contractor is required to enter data into the Contractor Manpower Reporting (CMR) system as defined in Section 5 of the PWS. Reporting period will be the period of performance not to exceed 12 months ending September 30 of each Government fiscal year and must be reported by 31 October of each calendar year. Data must be accurate and complete and entered into CMR during the data gathering period of every year, or part of a year, for which the contract is in force. NOTE: If the reporting of Manpower Equivalents is not separately priced, insert

NOTE: Additional services listed below are those services which require performance above the normal scope of the contract; all other services required for performance of the contract shall be included in the single factor proposed price. The Government will pay the rates for additional services not to exceed the rates shown in Domestic Rate Personal Property Solicitation D-19 effective 1 November 2010 or as changed by new rate solicitation.

a. Extra Pickup/Delivery.

b. Carrying of Piano/Organ:

Handling Charge (Pianos, Organs in excess of 38 inches in Height)

Handling Change (Pianos, Organs 38 Inches or Less in Height)

Flight Carry Charge Inside a single family dwelling First flight (One floor to next floor)

Each additional flight

NOTE: The first flight shall consist of at least eight steps. Additional flights are the number of complete flights or floors above or below the first flight.

c. Auxiliary Services:

Per additional vehicle

Labor Charge per person

d. Disassembly/assembly of wall unit.

e. Hoisting of articles.

Labor Charge per Person

NOTE: Line Items Numbered 0001AL(b) – Determination of repair is made as a result of on-site inspection of

The quantities shown by area of performance for each item in this Solicitation are the Government’s estimates of requirements which may be ordered during the period of the contract.

The Government’s estimated maximum daily requirements, excluding Saturday, Sunday and National, State, and local holidays are listed below by area of performance within each schedule. Offerors must complete the “Offeror's Guaranteed Maximum Daily Capability” which must equal or exceed the Government’s minimum acceptable daily

Est Maximum Acceptable Maximum

3001 SCHEDULE I - OUTBOUND SERVICES.

Option Year 3: 1 January - 31 December 2021

3001AA Complete Service – Outbound (HHGs). Services shall include premove survey, servicing of appliances, disassembly of furniture, if required, packaging, inventorying, tagging, wrapping, padding, packing and bracing of household goods in Government owned and furnished shipping containers (Shipping container Commercial Spec ASTM-D4169-01, SDDC Pam 55-12) at owner’s residence, or at Contractor’s facility when ordered by the Ordering Officer, properly securing and sealing for shipment, weighing, obliterating old markings, strapping, and drayage of the container within an area of performance. Service shall also include loading of shipments on line-haul carrier’s equipment at the contractor’s facility. When containers will not accommodate all articles of any one lot, loose articles shall be packed in the said containers before any over-packed articles are placed therein. Overflow, Qty Unit Price Total Area I:

A. At Owner’s Residence: 58 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

B. At Contractor’s Facility 10 NCWT Container, Commercial Spec

ASTM-D4169-01, or SDDC Pam 55-12

Area II:

A. At Owner’s Residence: 5 NCWT

Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

B. At Contractor’s Facility 5 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

3001AB Outbound (HHGs From Non-Temporary Storage). Service shall be the same as Item 0001AA above except that: (a) household goods shall be picked up at a non-temporary storage facility and transported to Contractor’s facility; or (b) household goods shall be delivered to Contractor’s facility; and (c)

Qty Unit Price Total Area I:

A. Pickup by Contractor: 200 NCWT ASTM-D4169-01, or SDDC Pam 55-12

B. Delivered to Contractor: 10 NCWT Container, Commercial Spec

ASTM-D4169-01, or SDDC Pam 55-12 B. Delivered by Contractor: 5 NCWT Container, Commercial Spec ASTM-D4169-01, or SDDC Pam 55-12

3001AC Complete Service-Outbound (HHGs-Overflow Articles and HHGs Shipments requiring other than

ASTM-D4169-01 or SDDC Pam 55-12 containers. Service shall be the same as Items 0001AA or Item 0001AB except that the loose articles are drayed to Contractor’s facility when ordered by the Ordering Officer for containerization in Government-furnished or Contractor-furnished containers.

Overflow, other shipments and oversize containers shall be constructed IAW ASTM-D6251. Each container shall be caulked during assembly. Overflow boxes and other shipments shall be limited to one per shipment. Other shipments are small household goods shipments that normally require a lesser size box than specified in Commercial Spec ASTM-D4169-01 or SDDC Pam 55-12. Overflow containers are of a lesser size than specified in Commercial Spec ASTM-D4169-01 or SDDC Pam 55- 12 and oversized containers are always of greater size than specified in Commercial SPEC ASTM-

Qty Unit Price Total Area I:

A. Government Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

B. Contractor-Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 10 NCWT

b. Oversize Articles 10 NCWT

c. Other Shipments 505 NCWT

(2) Domestic Pack:

a. Overflow Articles 10 NCWT

b. Oversize Articles 10 NCWT

c. Other Shipments 3019 NCWT Area II:

A. Government Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 10 NCWT

(2) Domestic Pack:

B. Contractor-Furnished Containers:

(1) Overseas Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 70 NCWT

(2) Domestic Pack:

a. Overflow Articles 5 NCWT

b. Oversize Articles 5 NCWT

c. Other Shipments 323 NCWT

3001AD Complete Service – Outbound (Unaccompanied Baggage). Service includes packaging, inventorying, packing in Government approved container, weighing, strapping, obliteration of old markings, marking, and loading shipments on the line-haul carrier’s equipment. Service shall be performed at

Qty Unit Price Total Area I:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 618 NCWT

Area II:

A. Government Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Contractor-Furnished Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 52 NCWT

30001AE Complete Service – Outbound (Unaccompanied Baggage from Non-temporary Storage). Service shall be the same as Item 0004, except that (a) unaccompanied baggage shall be picked up at a non-temporary storage facility and transported to Contractor’s facility; or (b) unaccompanied baggage shall

Qty Unit Price Total Area I:

A. Government Furnished

Containers:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 5 NCWT Area II:

A. Government Furnished Containers:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT Containers:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT 3001AF Outbound Service – Unaccompanied Baggage Packed by Owner. Service shall include weighing, strapping, banding, obliterating old markings, and marking. Service may include (when necessary) containerization in outer shipping containers as ordered by the Ordering Officer.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Containerization Not Required:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT B. Containerization Required:

(1) Drayage Included 10 NCWT

(2) Drayage not Included 10 NCWT

Area II:

A. Containerization Not Required:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT B. Containerization Required:

(1) Drayage Included 5 NCWT

(2) Drayage not Included 5 NCWT

3001AG Outbound Service – Unaccompanied Baggage Packed by Owner Consolidated Shipments/ Government

Qty Unit Price Total Area I:

A. Containerization Not Required:

(Drayage Included) 10 NCWT B. Containerization Required:

(Drayage Included) 5 NCWT

Area II:

A. Containerization Not

(Drayage Included) 2 NCWT

3001AH Expensive and Valuable Items. Service shall include inventorying each item, packing in Government approved, Contractor-furnished container(s), marking, banding and cubing at owner’s residence. Drayage if required, will be ordered by the Ordering Officer. If drayage is required, weighing shall be done on properly certified scales and certified weight ticket shall be furnished. If drayage is not required, weighing shall be done at owner's residence on portable or bathroom scales. In jurisdictions where local law prohibits the certification or portable scales, a weight certificate will not be required. However, upon the written authority of the contracting officer, the Contractor may apply a constructive weight or 11 pounds per gross cubic foot of the container.

Est Annual Unit Estimated Qty Unit Price Total Area I:

A. Drayage Included 5 NCWT B. Drayage Not Included 5 NCWT

Area II:

A. Drayage Included 2 GCWT B. Drayage Not Included 2 GCWT 3001AJ Storage. Storage of containerized articles shall be furnished when ordered by Ordering Officer. Charges shall not commence earlier than the sixth (6th) workday following date of the Transportation Officer’s receipt of notification of completion of containerization service. Storage charges apply for each 30-day period or fraction thereof. Date of release from storage shall not be considered in computation of storage charges.

Est Annual Unit Estimated Qty Unit Price Total

Area I: 5 NCWT Area II: 5 NCWT

3001AK Containers. Service shall consist of the furnishing of the following types of new containers or specially constructed wooden crates. Containers furnished or specially constructed are to be assembled and ready for loading.

When a specific container from the SDDC Pam 55-12 is ordered, the order will indicate the SDDC approved

Qty Unit Price Total Area I:

A. Container 5 ea

(ASTM-D4169-01)

B. Container 5 ea (SDDC Pam 55-12) C. Crate (ASTM-D6039/D6039M-02) 5 cu ft of fraction thereof Area II:

A. Container 2 ea

(ASTM-D4169-01)

of fraction

3001AL Remarking, Coopering and Assembly/Disassembly Service.

A. Remarking of Shipping for Reconsignment. Service shall consist of obliteration of all old marking, Qty Unit Price Total

B. Coopering. Service shall consist of repair of containers not to exceed 30% of total area of shipping container or cost of repairs will not exceed 50% of the container replacement cost. Minor repair, such as

Qty Unit Price Total

Government-owned containers. Component parts will be put into a cloth bag and attached to the container.

Qty Unit Price Total Area I:

A. Assembly 10 ea B. Disassembly 10 ea

Area II:

A. Assembly 10 ea B. Disassembly 10 ea

3001AM Drayage Beyond the Contract Area of Performance. Service shall consist of drayage of packed shipments beyond the contract area of performance, not to exceed 150 miles. Mileage shall be computed on the shortest highway distance commencing with the applicable point to the outer boundary of the contract area of performance.

Area I:

A. Household Goods 5 per Loaded Mile B. Unaccompanied Baggage 5 Per Loaded Mile

Area II:

A. Household Goods 5 per Loaded Mile B. Unaccompanied Baggage 5 Per Loaded Mile

3001AN Attempted Pickup. When the initial attempt to pickup a shipment at the owner’s residence is unsuccessful, charges apply provided the Contractor notified the Ordering Officer via telephone and provided that after Contractor’s notification, the Ordering Officer (a) cannot locate the owner within 30 minutes, (b) cannot have the…