PWS_Attachment_1.pdf

Reference Documents

American Society for Testing and Materials (ASTM) Standards

ASTM C31/C31M (2015ae1) Standard Practice for Making and Curing Concrete Test Specimens in the Field.

ASTM C33/C33M (2016e1) Standard Specification for Concrete Aggregates.

ASTM C39/C39M (2017) Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.

ASTM C40 (2016) Standard Test Method for Organic Impurities in Fine Aggregates for Concrete.

ASTM C42/C42M (2016) Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete.

ASTM C87 (2010) Effect of Organic Impurities in Fine Aggregate on Strength of Mortar.

ASTM C88 (2013) Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate.

ASTM C109 (2016a) Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in Cube Specimens).

ASTM C114 (2015) Standard Test Methods for Chemical Analysis of Hydraulic Cement.

ASTM C117 (2013) Standard Test Method for Materials Finer than 75-um (No. 200) Sieve in Mineral Aggregates by Washing.

ASTM C123 (2014) Standard Test Method for Lightweight Particles in Aggregate.

ASTM C127 (2015) Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate.

ASTM C128 (2015) Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate.

ASTM C131 (2014) Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.

ASTM C136 (2014) Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates.

ASTM C138 (2017) Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of concrete.

ASTM C142 (2010) Standard Test Method for Clay Lumps and Friable Particles in Aggregates.

ASTM C143/C 143M (2015a) Standard Test Method for Slump of Hydraulic-Cement Concrete

ASTM C172 (2014a) Standard Practice for Sampling Freshly Mixed Concrete.

ASTM C231 (2017) Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method.

ASTM C295 (2012) Standard Guide for Petrographic Examination of Aggregates for Concrete.

ASTM C403 (2016) Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance.

ASTM C495 (2012) Standard Test Method for Compressive Strength of Lightweight Insulating Concrete.

ASTM C535 (2016) Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine.

ASTM C566 (2015) Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying.

ASTM C666 (2015) Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing. Procedure A: Rapid Freezing and Thawing in Water.

ASTM C684 (1999; R2003) Making, Accelerated Curing, and Testing Concrete Compression Test Specimen.

ASTM C702 (1998; R2003) Reducing Samples of Aggregate to Testing Size.

ASTM C796 (2012) Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam.

ASTM C1064/C 1064M (2012) Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete.

ASTM C1077 (2016a) Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation.

ASTM C1140 (2014) Standard Test Method for Preparing and Testing Specimens from Shotcrete Test Panels.

ASTM C1260 (2014) Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method).

ASTM C1567 (2013) Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar- Bar Method).

ASTM C1602 (2012) Standard Test Method for Mixing Water Used in the Production of Hydraulic Cement Concrete.

ASTM C1609 (2012) Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading).

ASTM C1741 (2012) Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout.

ASTM D75 (2014) Standard Test Methods for Sampling Aggregates.

ASTM D512 (2012) Standard Test Method for Chlorine Ion in Water.

ASTM D546 (2017) Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures

ASTM D854 (2014) Standard Test Method for Specific Gravity of Soil Solids by Water Pycnometer.

ASTM D698 (2012, E2014, E2015) Standard Test Method for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)).

ASTM D979 (2015) Standard Practice for Sampling Bituminous Paving Mixtures.

ASTM D1068 (2015) Standard Test Method for Iron in Water.

ASTM D1140 (2017) Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing.

ASTM D1188 (2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples.

ASTM D1293 (2012) Standard Test Methods for pH of Water.

ASTM D1556 (2015e1) Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method.

ASTM D1557 (2012) Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)).

ASTM D2041 (2011) Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures.

ASTM D2172 (2017) Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures.

ASTM D2216 (2010) Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass.

ASTM D2419 (2014) Standard Test Method for San Equivalent Value of Soils and Fine Aggregate.

ASTM D2488 (2009a) Standard Practice for Description and Identification of Soils (Visual- Manual Procedure).

ASTM D2726 (2014) Standard Test Methods for Bulk Specific Gravity and Density of Non- Absorptive Compacted Bituminous Mixtures.

ASTM D2974 (2014) Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils.

ASTM D3665 (2007) Random Sampling of Construction Materials.

ASTM D3666 (2016) Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials.

ASTM D3740 (2012a) Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction.

ASTM D3744 (2011) Standard Test Method for Aggregate Durability Index.

ASTM D4220 (2014) Standard Practices for Preserving and Transporting Soil Samples.

ASTM D4791 (2010) Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate.

ASTM D4318 (2010; E2014) Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.

ASTM D4832 (2016) Standard Test Method for Preparation and Testing of Controlled Low Strength Materials (CLSM) Test Cylinders.

ASTM D4867 (2009; R2014) Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures.

ASTM D4992 (2014; E2015) Standard Test Method for Evaluation of Rock to be Used for Erosion Control.

ASTM D5030 (2013) Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit.

ASTM D5240 (2013) Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate.

ASTM D5312 (2012; R2013) Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions.

ASTM D5361 (2016) Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing.

ASTM D5519 (2015) Standard Test Methods for Particle Size Analysis of Natural and Man- Made-Riprap Materials.

ASTM D5821 (2013) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate.

ASTM D6023 (2016) Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM).

ASTM D6103 (2004) Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM).

ASTM D6473 (2015) Standard Test Method for Specific Gravity and Absorption of Rock for Erosion Control.

ASTM D6927 (2015) Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures.

ASTM D7382 (2008) Standard Test Method for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer.

ASTM E329 (2014a) Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection.

U.S. Army Corps of Engineers (USACE)

COE CRD C-104 (1980) Method of Calculation of the Fineness Modulus of Aggregate.

COE CRD-C 120 (1994) Test Method for Flat and Elongated Particles in Fine Aggregate.

COE CRD-C 130 (2001) Standard Recommended Practice for Estimating Scratch Hardness of Coarse Aggregate Particles.

COE CRD-C 148 (1969) Method of Testing Stone for Expansive Breakdown on Soaking in Ethylene Glycol.

COE CRD-C 163 (1992) Test Method for Water Permeability of Concrete Using Triaxial Cell.

COE CRD-C 169 (1997) Standard Test Method for Resistance of Rock to Wetting and Drying.

COE CRD-C 401 (1975) Method of Test for the Staining Properties of Water.

American Association of State Highway and Transportation Officials (AASHTO)

AASHTO R 18 (2016) Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories.