Description_&_Specifications_Auditorium_AV_Upgrade.pdf

Classroom/Auditorium:

Wiring:

• 5x Twisted Pair Cable Runs o Twisted Pair Cable Requirements

• Must be rated at 350 MHz Max Bandwidth

• Must be rated at least lGbps Data Transmission Speed

• Must be rated at 100 meter signal transmission@ lGbps

• Must have 4 pairs of twisted 24 awg wire

• Must meet CMR standard

• 7x Twisted Pair Cable Runs o Twisted Pair Cable Requirements

• Must be rated at 550 MHz Max Bandwidth

• Must be rated at least !Gbps Data Transmission Speed

• Must be rated at 100 meter signal transmission@ !Gbps

• Must have 4 pairs of twisted 23 awg wire

• Must meet CMR standard

• 23x Fiber Runs o Fiber Cable Requirements

• Must be Riser Rated Duplex Fiber

• Must be rated at least lOGbps Data Transmission Speeds

• Must be rated at 1000' signal transmission @ lOGbps

• Must be rated at 400 times pull force of standard fiber

• Must be rated at 10,000 times the bend capacity of standard fiber

• 12x 7.5M HDMI Cables o HDMI Cable Requirements

• HDMI Connector must require up to 81bs of pulling force to remove

• HDMI Cable must have "HDMI Premium Certification" from HDMI Licensing Administrator, Inc

• HDMI Cable must be certified for HDMI 2.0b Spec

• HDMI Cable must be certified for 18Gbps signal transmission@ max resolution of 3840x2160p (4K) @ 60Hz with 4:4:4 Chroma Subsampling

• 6x 3M HDMI Cables

• HDMI Connector must require up to 81bs of pulling force to remove

• HDMI Cable must have "HDMI Premium Certification" from HDMI

Licensing Administrator, Inc

• HDMI Cable must be certified for HDMI 2.0b Spec

• HDMI Cable must be certified for 18Gbps signal transmission@ max resolution of 3840x2160p (4K) @ 60Hz with 4:4:4 Chroma

• 2x 2M HDMI Cables

• HDMI Connector must require up to 81bs of pulling force to remove

• HDMI Cable must have "HDMI Premium Certification" from HDMI

Licensing Administrator, Inc

• HDMI Cable must be certified for HDMI 2.0b Spec

• HDMI Cable must be certified for 18Gbps signal transmission@ max resolution of 3840x2160p (4K)@ 60Hz with 4:4:4 Chroma

Video Sharing System:

• 16x 4K HDMI 2.0 Input Encoders o

Spec Requirements

• SFP+ lOGbE Connection

• 1080p@24Hz/60Hz must require no compression

• 4K@24Hz Video signals must require no compression

• 4K@60Hz Video signals must not require any more than 1:1.4 compression

• Device must have built-in 4K60 4:4:4 scalar that can downscale to

1080p or other resolutions

• Device must be capable of Multi-Source Video Composting including video tiling

• Device must provide Zero frame latency at all resolutions.

• Device must include Clock Synchronization Protocols for all video input and output devices

• Must support the following input resolutions :

• 640x480 @ 60Hz

• 720x480@60Hz

• 720x576 @ S0Hz

• 800x600 @ 60Hz

• 1024x768@60Hz

• 1280x720@50Hz

• 1280x720@60Hz

• 1280x1024@ 60Hz

• 1920x1080@ 24Hz

• 1920x1080@ 30Hz

• 1920x1080@ S0Hz

• 1920x1080@ 60Hz

• 1920x1200@ 60Hz

• 3840x2160@ 24Hz

• 3840x2160@ 25Hz

• 3840x2160 @ 30Hz

• 3840x2160 @ S0Hz

• 3840x2160@ 60Hz

• Each input unit must include one IR and one RS232 control port for use with Automation/Control System

• Units must support de-embedding of 2 channel PCM Audio from HDMI Signal and output via 3.5mm stereo audio jack

• Unit must have additional lGbE Port for connection to any Ethernet Network Compliant Device. Unit must provide 1Gb of reserved bandwidth for non-video data.

• Multiple units must be connected over the 10Gb network that allows for scaling the number of video inputs/outputs into the system .

• 7x 4K HDMI 2.0 Output Decoders o

• SFP+ lOGbE Connection

• 1080p@24Hz/60Hz must require no compression

• 4K@24Hz Video signals must require no compression

• 4K@60Hz Video signals must not require any more than 1:1.4 compression

• Device must have built-in 4K60 4:4:4 scalar that can downscale to

1080p or other resolutions

• Device must be capable of Multi-Source Video Composting including video tiling

• Device must provide Zero frame latency at all resolutions.

• Device must include Clock Synchronization Protocols for all video input and output devices

• Must support the following output resolutions :

• 640x480@60Hz

• 720x480@60Hz

• 720x576 @ S0Hz

• 800x600 @ 60Hz

• 1024x768@60Hz

• 1280x720@50Hz

• 1280x720@60Hz

• 1280x1024@ 60Hz

• 1920x1080@ 24Hz

• 1920x1080@ 30Hz

• 1920x1080@ S0Hz

• 1920x1080@ 60Hz

• 1920x1200@ 60Hz

• 3840x2160@ 24Hz

• 3840x2160@ 25Hz

• 3840x2160 @ 30Hz

• 3840x2160 @ S0Hz

• 3840x2160@ 60Hz

• Each input unit must include one IR and one RS232 control port for use with Automation/Control System

• Units must support de-embedding of 2 channel PCM Audio from HDMI Signal and output via 3.5mm stereo audio jack

• Unit must have additional lGbE Port for connection to any Ethernet Network Compliant Device. Unit must provide 1Gb of reserved bandwidth for non-video data.

• Multiple units must be connected over the 10Gb network that allows for scaling the number of video inputs/outputs into the system.

• lx AV Wall plate o Spec Requirements

• Must be a two piece unit with separate transmitter and receiver units

• Transmitter Requirements

• lx 2.0 HDMI Input

• lx VGA Input with 3.5mm Stereo Audio Jack

• lx RJ45 Output

• Inputs must work with all PC, VESA and traditional resolutions up to and including 4K 60Hz 4:2:0 8-bit

• HDMI Inputs must be HDCP 2.2/1.4 compliant

• Both Inputs and the RJ45 output must be on one single-gang decora wallplate

• Unit must automatically switch to active input and convert any compatible video signal to an equivalent HDMI Video Signal.

• Unit must be able to send the active video input over up to

100 Mover compatible category cable

• Must receive power from receiver unit

• Receiver Requirements

• l x 2.0 HDMI Output

• l x RJ45 Input

• Must provide power to transmitter over RJ45 Port

• HDMI Output must be HDCP 2.2/1.4 compliant

• lx UHD Blu-ray Players

• Must support the playback of DVDs, Blu -rays, and UHD Blu-rays

• Must have analog audio outs that can output a stereo downmix of digital audio tracks

Power Management:

• lx Power Conditioner with UPS Battery o Spec Requirements

• 12 Outlets

• All outlets must be IP controllable

• 6480 Joules of Surge Protection

• S3dB of EMI/RFI Filtration

• Ceramic Encased MOVs

• 2000 VA Battery Capacity

• Prioritization of Outlets when on Battery Power

• 6x Power Conditioner

• 3 Outlets

• All outlets must be IP controllable

• 2160 Joules of Surge Protection

• S3dB of EMI/RFI Filtration

• Ceramic Encased MOVs

Network:

• lx 802.llac 3x3 Wireless AP o Spec

• PoE+ Powered

• Wireless controller compatible

• 16 SSIDs (8 per Band)

• 2.4 GHz Band and SGHz Band

• Cloud based firmware updates

• 2"d LAN Port for wired network extensions

• Audio System:

• lx Stereo Microphone Mixer o

• 2 XLR Inputs

• 3 RCA Stereo Inputs

• ¼" Stereo Outputs

• RCA Stereo Outputs

• Must support Audio Ducking

• lx Automatic Mixer

• 4x XLR Mic Inputs with 12VDC Phantom Power

• lx Digital Channel Wireless Microphone Receiver o

• 4x Wireless Channels

• lx Handheld compatible digital wireless microphone

• lx Bodypack compatible digital wireless microphone

• lx 70V Amplifier with 500W x 2 Channels o

• 2 Channels of Amplification @ 500W

• IP-Enabled for remote management

• Controllable via IR, IP , or RS-232

• Balanced and Unbalanced inputs

• 2U Rack Height

Display Devices:

• 3x 75" 4K Displays with Articulating Mounts o

• 3840x2160 Native Resolution

• 120Hz Panel Refresh Rate

• FALD Backlight

• 10-Bit Panel

• 4x HDMI 2.0a inputs with HDCP 2.2 Support

• Dolby Vision HDR Support

• HDR 10 Support

• HLG Support

• Mounts must have dual arms

• Mount must have a 1.75" or less profile when in closed position

• Mount must have 25.5" of extension

• 3x 4K UHD Projectors and Mounts o

• 7S00 Lumen Output

• Laser Phosphor with color wheel Light Engine

• 4K-UHD resolution

• 16:9 Aspect Ration

• 1,000:1 Native Contrast Ratio

• 2x HDMI 2.0 Inputs

• 3x Projection Screens

• Motorized drop-down with flush mount ceiling box

• 16:9 Aspect Ratio

• 160" Diagonal Screen Size

• Screen Material must reject 65% of ambient light

Automation/Control System:

• 2x Wall Mounted Automation Touchscreens o Spec Requirements

• PoE Powered

• 8" Touch Display

• Mount in Double Gang LV Box

• Mountable in Portrait or Landscape orientation

• Display must wake-up when approached by a user

• Must support mounting on a table top stand

• 2x Automation Controllable Switches o Spec

• 600W Lighting Load control capability

• LED Status Lights with ambient light sensor to auto-dim LEDs brightness

• Decora Style

• 2.4 GHz Wi-Fi for communication with Automation System

• Must be compatible with an Aux Keypad for 3-Way applications

• 2x Automation Controllable Dimmers o Spec

• 600W Lighting Load control capability

• Must support dimming of Forward or Reverse Phase Lighting Loads with adaptive circuitry

• LED Status Lights with ambient light sensor to auto-dim LEDs brightness

• Decora Style

• 2.4 GHz Wi-Fi for communication with Automation System

• Must be compatible with an Aux Keypad for 3-Way applications

• 2x Automation Controllable Auxiliary

Keypads o Spec Requirements

• LED Status Lights with ambient light sensor to auto-dim

LEDs brightness

• Decora Style

• Must work with Automatable Dimmers or Switches to control lighting loads in 3-way wiring requirement