W911SG25Q0010_PCC5 30K Forklift Vendor Submitted Questions V2.docx
DOCX document 15 KB Posted
- Attached to
- PCC5 30K Forklift Support
- Solicitation number
- W911SG25Q0010
About this file
This is a Questions and Answers document for solicitation W911SG25Q0010 regarding the procurement of 30K forklifts for Fort Irwin/National Training Center. The document clarifies that vertical mast, 4x4 equipped forklifts are required, which must be able to operate in various environments from loose soil to hard gravel in temperatures up to 120 degrees Fahrenheit.
Key details include: DEF fluid must be supplied by the vendor upon delivery with forklifts being 100% operable; delivery location is confirmed as Fort Irwin/NTC, CA 92310 (not Fort Bliss); simultaneous delivery of multiple forklifts is acceptable with prior COR coordination; forklifts must be diesel-powered, include safety features like 10lb fire extinguishers, and comply with California emissions regulations. The equipment must withstand high desert terrain and 70mph wind gusts, with the contractor responsible for maintenance, repairs, and service parts while the government will provide qualified drivers and Ultra Low Sulfur Diesel fuel.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| W911SG25Q0010_PCC5 30K Forklift Vendor Submitted Questions.docx | DOCX document | |
| W911SG25Q0010 PCC5 30K FORKLIFT Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PCC5 30K Forklift Requirement Fort Irwin/NTC, CA Questions submitted from potential vendors
1. ** Are the forklifts required for this project to be vertical mast or Telescopic? Vertical Mast
1. Do they need to be 4x4 equipped? Yes
1. Can the DEF fluid be supplied upon delivery with the assumption that the army will use it in forklift as needed? No, The Government will not be responsible for storage of any DEF fluid. The Vendor shall fill upon delivery and shall ensure forklifts are 100% operable upon delivery.
1. Would it be acceptable for both forklifts to be delivered and accepted on the same day (even though the POP dates are different)? This is workable provide no additional cost for early delivery. Vendor needs to coordinate with the COR on the ground prior to delivery of the equipment.
1. What is the address to which the forklifts will be delivered? I see two different destinations on the solicitation. One says W6KR BDE MODERNIZATION CMD BLDG 21000 MINUE DR FORT BLISS TX 79918-0000 and the other says Fort Irwin , CA 92310. The destination is Fort Irwin/NTC, CA 92310.
1. Are the forklifts going to be used on asphalt/improved surface areas (developed sand lots), or will these be used in "deep sand" or "dune" areas? We want to be sure we quote and provide the correct equipment? Forklifts shall be able to work in a variety of environments from lose soil to hard gravel and temperatures up to 120 Fahrenheit.
File details come from the government source that posted it. Updated .