Reference_Question-Anwer_33_lpp-24-led-area_(1).pdf

Engineered & Manufactured In The U

SA

Rev. V07302018

ENERGY

SAVINGS

50-80%

LED LIFE

300,000+

HOURS

Intertek

This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.

Project Name

Catalog #

Fixture Type

Product Overview

Advanced light engine technology in a traditional housing design.

Wisconsin engineering and craftsmanship utilizing premium components.

Our LED lights, light poles and brackets are proudly engineered and manufactured in the USA. We use only the highest quality components, and our LED light fixtures deliver unmatched light output and efficiency for any area and site lighting project. Precision engineered for performance and energy savings, these products dramatically reduce energy consumption by up to 80% and virtually eliminate ongoing maintenance expenses for a variety of customers and applications.

Highlights:

• Engineered and manufactured in Wisconsin, USA from domestic and imported components

• ETL Certified: Conforms to UL STD 1598 & CSA STD C22.2 # 250.0 for wet locations

• L70 calculated LED life over 300,000+ hours

• Drivers are 0-10v dimming standard

• Four light engine options from 5,685 – 21,987 lumens for 75-525w HID replacements

• Premium high-output Chip-On-Board (COB) LEDs in 5000K, 4000K and 3000K options, custom color temps available upon request

• Minimum CRI of 70, custom CRI available

Common Applications:

• Parking lots, ramps, walkways and roadways

• General area and site lighting

• Car dealerships, schools, hospitals, hotels and gas stations

• Retail stores and commercial buildings

Light Engine Warranty:

• 5-year standard limited warranty on all light engine components

• Accessories and adders covered by separate OEM supplier warranties

24" KittyHawk LED Area Light, Heritage Series

206 W. McWilliams St.

Suite 101 Fond du Lac, WI 54935

888-791-1463 quotes@lightpolesplus.com LightPolesPlus.com https://lightpolesplus.com

This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.

Product Specifications

Rev. V07302018

Engineered & Manufactured In The U

SA

ENERGY

SAVINGS

50-80%

LED LIFE

300,000+

HOURS

Intertek

Housing Construction, Finish & Mounting:

• Rugged, die-cast, low profile aluminum housing

• Durable, multi-layer, polyester powder coat or industrial grade liquid paint

• Available in a variety of colors such as dark bronze, black, white, light gray, dark green and natural aluminum (custom colors available upon request)

• Integrated pole mounting arm, other mounting accessories available upon request

Optics & Lighting Distribution:

• Innovative silicone optics assembly with precision light control and cutoff

• Standard photometric distributions include III-WIDE, V-WIDE, IV-FWD, 30° NARROW SPOT and 70° MEDIUM SPOT

• IES files, photometric reports and simulations available upon request

Automotive Dealership Optics:

• Left and right optical rotation available for applications like car dealership front lines (optics are not field-rotatable, must be done at factory)

• Delivers enhanced lighting and proper photometric control of auto dealership merchandise

• Allows for simple 2@180 pole mount while rotating forward throw light patterns toward dealership merchandise

Electrical:

• Operating temp: -40 ℃ to +40 ℃

• Standard AC input of 120-277v VAC, up to 480v available

• EMI filter: 47CFR, part 2, part 15

• Power factor: >0.9

• Total harmonic distortion: <20%

• Surge protection: IEC/EN 61000-4-5 EMC test standard

• Licensed electrician required for installation

Energy Control Options:

• Daylight harvesting and photo controls

• Motion control and dimming

• Surge protection

• CA Title 24 compliance options available upon request

Effective Projected Area (EPA) & Weight:

• 1.0 EPA at 0°

• 25 LBS

Created & Simulated per IESNA LM-63-1995

-100'

-80'

-60'

-40'

-20'

0'

20'

40'

60'

80'

100' 100'80' 60' 40' 20' 0' -20'-40'-60' -100'-80'

-60'

-40'

-20'

0'

20'

40'

60'

80'

100'

120w Area, Type V Square, 20’ Height 120w Area, Type III, 20’ Height 120w Area, Type IV FWD, 20’ Height 120w Area, Custom Distribution (Type II), 20’ Height

-60'

-40'

-20'

0'

20'

40'

60'

80'

100'

-60'

-40'

-20'

0'

20'

40'

60'

80'

100' 100'80' 60' 40' 20' 0' -20'-40'-60' -100'-80'

0.1 fc 0.5 fc 2.0 fc 5.0 fc

LEGEND

206 W. McWilliams St.

Suite 101 Fond du Lac, WI 54935

888-791-1463 quotes@lightpolesplus.com

1. Considered to be a typical HID equivalent. Specific HID wattage equivalents will depend on things like environmental and application characteristics, distribution type and design criteria.

2. Considered initial nominal value of the LED light engine as specified by the LED chip manufacturer. Fixture efficacy and lumen output will depend on things like color temperature, distribution type and environmental characteristics.

3. Considered the typical initial delivered lumens of the LED light engine. Specific lumens for an application will depend on things like color temperature, distribution type and environmental characteristics.

4. Lumen maintenance values at 25 ℃ are calculated per TM-21 based on LM-80 data and in-house luminaire testing.

5. In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing (DUT) i.e. the packaged LED chip.

6. In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing (DUT) i.e. the packaged LED chip.

Note: Additional wattages and configurations available upon request. Specifications are subject to change without notice.

Lumen Maintenance Factor (LMF)⁴

Type Ambient Initial LMF 25K Hour Projected

LMF⁵

50K Hour Projected

LMF⁵

75K Hour Projected

LMF⁶

100K Hour Projected

LMF⁶

COB 25 ℃ (77 ℉) 100% 96% 94% 92% 90%

Rev. V07302018

Engineered & Manufactured In The U

SA

ENERGY

SAVINGS

50-80%

LED LIFE

300,000+

HOURS

Intertek

Light Engine Specifications (Values Listed for Type III, 5000K)

81/4” 133/4”

233/4”

4”

Base Model

System Watts

LED

Watts

HID

Replacement¹

Number of COBs

Drive Current

Nominal Lumens²

Delivered Lumens³

L70 EnergySTAR LED Life⁴

24-ALHC-40-50-MV-3 40w 36w 75-175w 1 1,050 mA 5,685 5,287 300,000+ Hrs

24-ALHC-80-50-MV-3 79w 71w 125-300w 2 1,050 mA 11,245 10,457 300,000+ Hrs

24-ALHC-120-50-MV-3 119w 107w 200-400w 3 1,050 mA 16,679 15,511 300,000+ Hrs

24-ALHC-160-50-MV-3 157w 142w 300-525w 4 1,050 mA 21,987 20,448 300,000+ Hrs

Amperage Load

Wattage Total Amps Per Fixture

110v 120v 208v 220v 240v 277v 347v 480v

40w 0.36A 0.33A 0.19A 0.18A 0.17A 0.14A 0.12A 0.08A

79w 0.72A 0.66A 0.38A 0.36A 0.33A 0.29A 0.23A 0.16A

119w 1.08A 0.99A 0.57A 0.54A 0.5A 0.43A 0.34A 0.25A

157w 1.43A 1.31A 0.75A 0.71A 0.65A 0.57A 0.45A 0.33A

206 W. McWilliams St.

Suite 101 Fond du Lac, WI 54935

888-791-1463 quotes@lightpolesplus.com

* Many lens options available, contact us for more options

Ordering Information

Rev. V07302018

Engineered & Manufactured In The U

SA

ENERGY

SAVINGS

50-80%

LED LIFE

300,000+

HOURS

Intertek

Ex. 24-ALHC-120-50-MV-3-DB-BPC1

Designation

24-ALHC = 24” Area Light COB

Wattage

40 = 40 Watt

80 = 80 Watt

120 = 120 Watt

160 = 160 Watt

Accessories

Controls

BPC1 = Button Photocontrol, 120 VAC

BPC2 = Button Photocontrol, 208 to 277 VAC

BPC3 = Button Photocontrol, 347 VAC

BPC4 = Button Photocontrol, 480 VAC

MPS1 =

Motion/Photo Sensor, 0-8’ mounting heights, 48’ diameter @ 8’, 100 - 347VAC (single phase) or 208/230/480VAC (phase-to-phase) (Installed In Fixture)

MPS2 =

Motion/Photo Sensor, 8-40’ mounting heights, 100’ diameter @ 40’, 100

- 347VAC (single phase) or 208/230/480VAC (phase-to-phase) (Installed In Fixture)

RMT1 = Optional Remote For Motion/Photo Sensor, One Remote Controls Multiple Units

SRG1 = Surge Protector, 120v - 277v

SRG4 = Surge Protector, 347v - 480v

F10 = 10 Amp Fuse Kit, 120-480 VAC

Other

VS12 = Glare Shield, Aluminum, Standard Powder Coat

KH20WM = Wall Mount Adapter, Die Cast Aluminum, Standard Powder Coat

RPA35 = 3-5" OD Round Pole Adapter

WHP3NP = 3’ Cord w/o Plug, Stripped Pigtail Both Ends (Not Installed)

WHP3P1 = 3’ Cord w/ NEMA 5-15P, Stripped Pigtail One End (Not Installed)

SFAL = Adjustable Slipfitter Mount, Fits 2.38" OD Tenon & Arm Mounts

TRAL = Adjustable Trunnion Yolk Mount

TA238D1 = Drill Single Tenon Adapter For 2.38" OD Existing Tenon (Painted To Match Fixture, Other Sizes Avail)

TA238D2 = Drill 2@180 Tenon Adapter For 2.38" OD Existing Tenon (Painted To Match Fixture, Other Sizes Avail)

TA238D4 = Drill 4@90 Tenon Adapter For 2.38" OD Existing Tenon (Painted To Match Fixture, Other Sizes Avail)

TA238D5 = Drill 2@90 Tenon Adapter For 2.38" OD Existing Tenon (Painted To Match Fixture, Other Sizes Avail)

TA238D6 = Drill 3@90 Tenon Adapter For 2.38" OD Existing Tenon (Painted To Match Fixture, Other Sizes Avail)

Color Temp.

50 = 5000K

40 = 4000K

30 = 3000K

CT = Custom

Input Voltage

MV = 100-277v

HV = 347-480v

CV = Custom

Color

DB = Dark Bronze

BK = Black

WH = White

SG = Slate Gray

LG = Light Gray

DG = Dark Green

NA = Nat. Alum.

Paint

SC = Custom Color

Distribution Type

5M = 100° Type V

5W = Type V Square

4 = Type IV FWD

3 = Type III Wide

2 = Type II Wide

70 = 70° Medium Spot

30 = 30° Narrow Spot

CD = Custom

Mounting Accessories

RPA35 VS12KH20WM TRAL SFAL TA238DX

206 W. McWilliams St.

Suite 101 Fond du Lac, WI 54935

888-791-1463 quotes@lightpolesplus.com

Rev. V07302018

Engineered & Manufactured In The U

SA

ENERGY

SAVINGS

50-80%

LED LIFE

300,000+

HOURS

Intertek

Drill Pattern for Area Light Fixtures

! IMPORTANT: DIMENSIONS ARE NOT TO SCALE!

Top Hole 3" from Pole Top

206 W. McWilliams St.

Suite 101 Fond du Lac, WI 54935

888-791-1463 quotes@lightpolesplus.com