Salient Characteristics_Crane_Revised 28Jul2026_Final.doc

DOC document 87 KB Posted

Attached to
100% Small Business Set-Aside for Single Girder underhung Bridge Crane
Solicitation number
W911QX26QA123
Issued by

About this file

Written by GovTribe AI ·

This is a Salient Characteristics document for a federal solicitation (W911QX26QA123) issued by the Department of the Army Materiel Command, Army Contracting Command Aberdeen Proving Ground. The document outlines specifications for a single girder underhung bridge crane required by the Government, which has been designated as a 100% Small Business Set-Aside. The Government requires one (1) crane meeting CMAA Class C specifications with a 20-foot span, 50-foot length, and 5-ton capacity. The crane must be equipped with a 460-volt, 3-phase motor, variable frequency drive (VFD) controls for bridge traversing (8-80 feet per minute), trolley traversing (13-80 feet per minute), and hoist speeds (2-11 feet per minute). Additional requirements include a UL-certified chain hoist with electronic overload limiter, 10-foot factory lift height, radio control system with two transmitters and one receiver, and a backup traveling push button pendant.

The complete scope includes a freestanding runway system with eight columns, 11-foot height under the runway beam, and 9'6" hoist hook height. The contractor must remove and discard the existing 3-ton bridge crane system, provide full installation services with labor and lift equipment rentals, perform OSHA load testing per specified requirements, and deliver freight and rigging services to 6375 Johnson Road, Building 321, Aberdeen Proving Ground 21005 within 12 weeks after receipt of order. Warranty provisions include one year on all equipment, two years on installation labor, and five years on the hoist motor. On-site operator training for shop employees is required. The solicitation was amended on 07 August 2026 to change the hoist specification from wire rope to chain hoist and extend the submission deadline. The document is certified by Micah Gallagher, FCDD-RLA-TF, confirming that all salient characteristics are commercially available.

View the file

Other files

File Type Posted
Solicitation W911QX26QA123 QA_28JUL2026.docx DOCX document
W911QX26QA123 QA.docx DOCX document
Adelphi Special Instructions and Information Full-Text Attachment_26QA123_Final.doc DOC document
Salient Characteristics_Crane_Signed.doc DOC document
Combination Synopsis-Solicitation for Commercial Purchases (Under SAT)_26QA123_Final.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Salient Characteristics

Commercial Availability Certification:

I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.

Signature (typed name): Micah Gallagher, FCDD-RLA-TF Technical Point of Contact (TPOC)

The Government requires quantity one (1) Single Girder Top Running Overhead Bridge Crane in accordance with the following specifications:

· The contractor shall include a Single Girder underhung Bridge Crane with coped bridge that meets the Crane Manufacturers Association of America (CMAA) class C specifications

· Shall include a twenty foot (20') span

· Shall include a fifty foot (50’) length

· Shall include a five (5) ton capacity

· Shall include a 460 volt/ 3 phase motor

· Shall include a bridge transversing speed of 8-80 feet per minute for variable frequency drive controls (VFD)

· Shall include a trolley transversing speed of 13-80 feet per minute for variable frequency drive controls (VFD)

· Shall include a hoist speed of 2-11 feet per minute for variable frequency drive controls (VFD)

· Shall include chain hoist certified and listed to underwriters laboratories (UL)

· Shall include hoist with variable frequency drive (VFD)

· Shall include electronic overload limiter

· Shall include a 10 foot hoist factory lift

· Shall include radio control system with (2) transmitters and (1) receiver

· Shall include a backup traveling push button pendant

· Shall include a freestanding runway system with eight (8) columns

· Shall include a 11 foot height under runway beam

· Shall include a hoist hook height of 9’6”

· Shall include the removal and discard of existing 3 ton bridge crane system

· Shall include installation services

· Shall include labor, travel and lift equipment rentals for installation and load testing

· Shall be OSHA load tested per OSHA requirements 1910.179(K)(2), 1926.251(A)(4), AND 1926.251(C)(15)(II)

· Shall include freight, pick up and delivery

· Shall include rigging services

· Delivery to 6375 Johnson Road, building 321, Aberdeen Proving Ground 21005 no later than 12 weeks After Receipt of Order (ARO).

· The contractor shall include a one-year warranty on all equipment pieces, two-year warranty on installation labor, and five-year warranty on hoist motor

· Shall include on-site operator training for shop employees Contracting Officer:

Template last updated 07/28/2016

File details come from the government source that posted it. Updated .