Salient Characteristics_Crane_Signed.doc
DOC document 88 KB Posted
- Solicitation number
- W911QX26QA123
About this file
This document is a Salient Characteristics specification for a Single Girder Underhung Bridge Crane to be procured by the Department of the Army Materiel Command at Aberdeen Proving Ground. The solicitation (W911QX26QA123) is a 100% Small Business Set-Aside, indicating that only small business concerns are eligible to compete for this contract award. The specification establishes the technical requirements and performance standards that bidding contractors must meet to be considered for award, defining the baseline characteristics and functional capabilities expected of the crane equipment.
The salient characteristics document outlines the minimum technical specifications and performance parameters that the single girder underhung bridge crane must satisfy, serving as the evaluation baseline for determining contractor responsiveness and technical acceptability. This specification-driven approach ensures that all proposals meet defined performance standards while allowing contractors flexibility in their design and manufacturing approaches, provided they meet or exceed the established salient characteristics for this equipment procurement.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Salient Characteristics_Crane_Revised 28Jul2026_Final.doc | DOC document | |
| Solicitation W911QX26QA123 QA_28JUL2026.docx | DOCX document | |
| W911QX26QA123 QA.docx | DOCX document | |
| Adelphi Special Instructions and Information Full-Text Attachment_26QA123_Final.doc | DOC document | |
| Combination Synopsis-Solicitation for Commercial Purchases (Under SAT)_26QA123_Final.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics
Commercial Availability Certification:
I have evaluated the commercial marketplace and determined that all of the salient characteristics documented below are available in products/services offered in the commercial marketplace.
Signature (typed name): TBD Technical Point of Contact (TPOC)
The Government requires quantity one (1) Single Girder Top Running Overhead Bridge Crane in accordance with the following specifications:
· The contractor shall include a Single Girder underhung Bridge Crane with coped bridge that meets the Crane Manufacturers Association of America (CMAA) class C specifications
· Shall include a twenty foot (20') span
· Shall include a fifty foot (50’) length
· Shall include a five (5) ton capacity
· Shall include a 460 volt/ 3 phase motor
· Shall include a bridge transversing speed of 8-80 feet per minute for variable frequency drive controls (VFD)
· Shall include a trolley transversing speed of 13-80 feet per minute for variable frequency drive controls (VFD)
· Shall include a hoist speed of 2-11 feet per minute for variable frequency drive controls (VFD)
· Shall include H4 rated electric wire rope hoist certified and listed to underwriters laboratories (UL) 1340
· Shall include hoist with variable frequency drive (VFD)
· Shall include electronic overload limiter
· Shall include a 10 foot hoist factory lift
· Shall include radio control system with (2) transmitters and (1) receiver
· Shall include a backup traveling push button pendant
· Shall include a freestanding runway system with eight (8) columns
· Shall include a 11 foot height under runway beam
· Shall include a hoist hook height of 9’6”
· Shall include the removal and discard of existing 3 ton bridge crane system
· Shall include installation services
· Shall include labor, travel and lift equipment rentals for installation and load testing
· Shall be OSHA load tested per OSHA requirements 1910.179(K)(2), 1926.251(A)(4), AND 1926.251(C)(15)(II)
· Shall include freight, pick up and delivery
· Shall include rigging services
· Delivery to 6375 Johnson Road, building 321, Aberdeen Proving Ground 21005 no later than 12 weeks After Receipt of Order (ARO).
· The contractor shall include a one-year warranty on all equipment pieces, two-year warranty on installation labor, and five-year warranty on hoist motor
· Shall include on-site operator training for shop employees Contracting Officer:
Template last updated 07/28/2016
File details come from the government source that posted it. Updated .