sol_W911N2-17-R-0009.pdf

PDF 467 KB Posted Feb 14, 2017

Attached to: Plumbing Supplies Federal contract opportunity
Solicitation number: W911N2-17-R-0009
Issued by: Department of the Army Materiel Command Contracting Command Redstone Arsenal

About this file

From the source

solicitation

View the file

Other files for this federal contract opportunity

Other files attached to Plumbing Supplies, newest first.
File	Type	Posted
0001.pdf	PDF	Feb 28, 2017
drawing_9-2-5191_(REF_9-2-5022)_W25G1Q6106R001.PDF	PDF	Feb 28, 2017
conformed_RFP.pdf	PDF	Feb 28, 2017
drawing_9-2-2155_W25G1Q6106R001.PDF	PDF	Feb 14, 2017
drawing_9-2-5191_(REF_9-2-5022)_W25G1Q6106R001.PDF	PDF	Feb 14, 2017
drawing_9-1-0584S1_RevC_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-1-0584PL2_RevB_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-2-9306_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-1-0584PL1_RevB_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-1-0584sht2revC_W25G1Q6106R001.pdf	PDF	Feb 14, 2017

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SEE ADDENDUM

(No Collect Calls)

W911N2-17-R-0009 14-Feb-2017

b. TELEPHONE NUMBER

717-267-9617

8. OFFER DUE DATE/LOCAL TIME

04:00 PM 03 Mar 2017

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W911N29. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

LAURA J. BUEHLER

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

W25G1Q6106R001

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED ORX

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

LETTERKENNY ARMY DEPOT

LETTERKENNY CONTRACTING OFFICE - ACC

1 OVERCASH AVENUE, ATTN: CCAM-ALK, BLDG 2S

CHAMBERSBURG PA 17201-4150

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W25G1Q 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

DIRECTORATE OF OPS PLANNING & SUPPORT

BLDG 370 ASRS DOOR 18 AMLD-PLX

LETTERKENNY ARMY DEPOT

CHAMBERSBURG PA 17201-4150

TEL: FAX:

717-2679834FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,000

NAICS:

332913

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF123

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W911N2-17-R-0009

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES ESTIMATED

QUANTITY

UNIT UNIT PRICE ESTIMATED AMOUNT

0001 300 Each Adapter Assembly

FFP

Air Compressor -3/8 inch x 1/4 inch.

-Brass.

-See Drawing 9-2-2155.

FOB: Destination

PURCHASE REQUEST NUMBER: W25G1Q6106R001

ESTIMATED

NET AMT

UNIT UNIT PRICE ESTIMATED AMOUNT

0002 100 Each Air Line

FFP

Compressor, 3/8 inch QDISC, Tee, 15 foot, M x M x F with female coupling.

-1 each steel, 3/8 in body, hose barb nipple, ½ port, 300 psi -2 each, 3/8 in body, ½ National Pipe Thread Fuel female, 20 series, steel, quick disconnect -hose ferrule (2 each), 1 inch length, .812 internal diameter, brass -15 foot hose meeting characteristics: PVC/vinyl composition reinforced by polyester yarn, temperature range of minus 5 degrees F to 150 degrees F, ½ inch internal diameter, 0.8 inch outer diameter, MAX PSI of 300, 17 inch vacuum rating, minimum bend radius of 1.5 inches

UNIT UNIT PRICE ESTIMATED AMOUNT

0003 100 Each Bushing

FFP

3/8 inch FNPT x 1/2 inch MNPT. Brass -14 Threads per square inch -1 inch Total Length -0.53 inches thread engagement -Connection is National Pipe Thread Fuel Male × National Pipe Thread Fuel Female -Material is Nickel Plated brass -Body shape is Hexagonal

UNIT UNIT PRICE ESTIMATED AMOUNT

0004 100 Each Fitting

FFP

3/8 inch barb x 1/4 inch MNPT. Brass -18 Threads per square inch -1.25 inch total length -0.40 inches thread engagement

UNIT UNIT PRICE ESTIMATED AMOUNT

0005 500 Each Flow Restricter

FFP

Shower head. Black delrin -material is a black Polyoxymethylene disk -Thickness is 1/8 inch -Outer diameter is ¾ inch -1/8 inch hole is drilled in center of disk

UNIT UNIT PRICE ESTIMATED AMOUNT

0006 100 Each Hose Barb

FFP

Hose Barb x MNPT swivel, .75 inches. Brass.

-For hose/pipe size ¾ inch National Pipe Thread Fuel -Maximum pressure is 120PSI at 72 degrees Fahrenheit -Temperature range is minus 40 degrees Fahrenheit to 160 degrees Fahrenheit.

-Thread engagement is 0.55 inches -14 threads per square inches -Seal material is rubber

UNIT UNIT PRICE ESTIMATED AMOUNT

0007 80 Each Hose Clamp

FFP

Worm drive, SAE #10, 1/2 inch band stainless steel.

-Material is stainless steel (301 or 305) -Clamp internal diameter range is 9/16 inch to 1-1/16 inch -Band width is ½ inch.

-Slotted Hexagonal screw for band is 5/16 inch size

UNIT UNIT PRICE ESTIMATED AMOUNT

0008 100 Each Hose Splice Mender

FFP

1/2 inch barbed. Brass -Total length is 2 inches -Outer diameter of barb is 0.72 inches -Inner diameter of barb is 0.38 inches -Intended for ½ inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

0009 100 Each Hose Splice Mender

FFP

3/4 inch barbed. Brass -Total length is 2.5 inches -Outer diameter of barb is 0.88 inches -Inner diameter of barb is 0.63 inches -Intended for 3/4 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

0010 100 Each Plug

FFP

Quick Connect, 3/8 inch x 3/8 inch tube.

-90 degree elbow is the shape.

-Material is Polypropylene -Maximum PSI is 60 -Barbed fitting outer diameter is 7/16 inch which needs to accommodate 3/8 inch tubing -Quick disconnect fitting outer diameter is ¾ inch which needs to accommodate 3/8 inch tubing

UNIT UNIT PRICE ESTIMATED AMOUNT

0011 70 Each Pump

FFP

Inlet water, Potable, 15 A, -115 Volts Alternating Current -4.5 gallons per minute flow rate -3.75 inches high -6.3 inches wide -9.9 inches long -40 pounds per square in switch -2 each ¾ inch hose barb ports. Ports are snap in style.

-6 foot long power cord -Self priming -four rubber like mounts for easy installation

UNIT UNIT PRICE ESTIMATED AMOUNT

0012 80 Each Socket

FFP

Quick connect, 3/8 inch x 3/8 inch.

-First end is a ¾ inch internal diameter quick disconnect that accepts 3/8 inch internal diameter couplings.

-Second end is threaded. 0.41 inches thread engagement, 18 threads per inch, 3/8 inch Nation Pipe Thread size.

-Total length is 2-11/16 inch long.

-60 PSI maximum pressure.

-Polypropylene material.

UNIT UNIT PRICE ESTIMATED AMOUNT

0013 3,000 Feet, Inches and Fraction

Tubing

FFP

Nylobraid .75 inch -Polyester braid reinforced polyvinylchloride plastic is material -5.5 inch bend radius.

-3/16 inch thick walls -3/4 inch internal diameter -1-1/8 inch outer diameter

UNIT UNIT PRICE ESTIMATED AMOUNT

0014 3,000 Feet, Inches

Tubing

Polyurethane, 3/8 Inch -Polyester braid reinforced polyurethane is material -Rated at 85A durometer -3/32 inch thick walls -3/8 inch internal diameter -9/16 inch outer diameter -Color is blue

UNIT UNIT PRICE ESTIMATED AMOUNT

0015 60 Each Valve

FFP

Ball, 3/8 inch, barbed -Total length is 3-3/16 inches -Accepts internal tube diameters of 3/8 inch -Male X Male style connection -Seal and seat gaskets are nitrile -Body make up is nylon -Ball composition is polypropylene

FOB: Destination

NSN: 4796K73:39428

UNIT UNIT PRICE ESTIMATED AMOUNT

0016 200 Each Valve

FFP

Mixing, Shower -Flow rate is 2.5 gallons per minute

- ½ inch iron pipe size (IPS) connections -Finish is polished chrome

UNIT UNIT PRICE ESTIMATED AMOUNT

0017 100 Each Hose Splice//Mender

FFP

1 inch, barbed, aluminum.

Material is brass -Total length is 2.5 inches -Outer diameter of barb is 1.25 inches -Inner diameter of barb is 0.75 inches -Intended for 1 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

0018 200 Each Coupling

FFP

Hose, 1/4 inch. Brass.

-1.69 inch total length -1st connection is a plug tip for ¼ coupling size -2nd end is 9/16 inch outer diameter threaded connection.

-18 threads per inch for .40 thread engagement.

-1/4 inch National Pipe Thread Fuel male end -coupling must be a quick disconnect -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

0019 60 Each Coupling

FFP

Sleeve lock socket. Industrial, 3/8 inch X 3/8 inch NPT female. Brass.

-total length is 2.5 inches.

-3/8 inch National Pipe Thread Fuel pipe end -Coupling size is 3/8 inch -Seal material is nitrile -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

0020 100 Each Heater, Water

FFP

15.25 x 12.25 x 4.25. Must be brass.

-208 Volt -18,000 KiloWatt -50 amps/ phase -4 gallons per minute flow rate -Minimum pressure of 25 PSI, and maximum of 150 PSI.

-Entry points are ½ inch compression fittings located on the bottom of unit.

UNIT UNIT PRICE ESTIMATED AMOUNT

0021 60 Each Assembly

FFP

Power tee.

-See Drawing 9-1-0584 -anodized aluminum -brass is acceptable

UNIT UNIT PRICE ESTIMATED AMOUNT

0022 120 Each Assembly

FFP

Blow gun, 1/4 inch.

-air inlet is for ¼ inch female pipe size -Nozzle length is 1.5 inches -maximum inlet pressure is 150 PSI -air outlet is 1/8 inch female pipe size -Nozzle is zinc -Body is chrome plated zinc -must be brass

FOB: Destination

NSN: 5369K51:39428

UNIT UNIT PRICE ESTIMATED AMOUNT

0023 50 Each Assembly

FFP

Hose -See Drawing 9-2-5022

UNIT UNIT PRICE ESTIMATED AMOUNT

0024 40 Each Assembly

FFP

Hose -See Drawing 9-2-9306 FOB: Destination

NSN: 9-2-9306-1

UNIT UNIT PRICE ESTIMATED AMOUNT

0025 40 Each Hose

FFP

Assembly.

-See drawing 9-2-9306

UNIT UNIT PRICE ESTIMATED AMOUNT

1001 300 Each OPTION Adapter Assembly

FFP

Air Compressor -3/8 inch x 1/4 inch.

-Brass.

-See Drawing 9-2-2155.

UNIT UNIT PRICE ESTIMATED AMOUNT

1002 100 Each OPTION Air Line

FFP

Compressor, 3/8 inch QDISC, Tee, 15 foot, M x M x F with female coupling.

UNIT UNIT PRICE ESTIMATED AMOUNT

1003 100 Each OPTION Bushing

FFP

UNIT UNIT PRICE ESTIMATED AMOUNT

1004 100 Each OPTION Fitting

FFP

3/8 inch barb x 1/4 inch MNPT. Brass -18 Threads per square inch -1.25 inch total length -0.40 inches thread engagement

UNIT UNIT PRICE ESTIMATED AMOUNT

1005 500 Each OPTION Flow Restricter

FFP

Shower head. Black delrin -material is a black Polyoxymethylene disk -Thickness is 1/8 inch -Outer diameter is ¾ inch -1/8 inch hole is drilled in center of disk

UNIT UNIT PRICE ESTIMATED AMOUNT

1006 100 Each OPTION Hose Barb

FFP

Hose Barb x MNPT swivel, .75 inches. Brass.

-For hose/pipe size ¾ inch National Pipe Thread Fuel -Maximum pressure is 120PSI at 72 degrees Fahrenheit -Temperature range is minus 40 degrees Fahrenheit to 160 degrees Fahrenheit.

-Thread engagement is 0.55 inches -14 threads per square inches -Seal material is rubber

UNIT UNIT PRICE ESTIMATED AMOUNT

1007 80 Each OPTION Hose Clamp

FFP

Worm drive, SAE #10, 1/2 inch band stainless steel.

-Material is stainless steel (301 or 305) -Clamp internal diameter range is 9/16 inch to 1-1/16 inch -Band width is ½ inch.

-Slotted Hexagonal screw for band is 5/16 inch size

UNIT UNIT PRICE ESTIMATED AMOUNT

1008 100 Each OPTION Hose Splice Mender

FFP

1/2 inch barbed. Brass -Total length is 2 inches -Outer diameter of barb is 0.72 inches -Inner diameter of barb is 0.38 inches -Intended for ½ inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

1009 100 Each OPTION Hose Splice Mender

FFP

3/4 inch barbed. Brass -Total length is 2.5 inches -Outer diameter of barb is 0.88 inches -Inner diameter of barb is 0.63 inches -Intended for 3/4 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

1010 100 Each OPTION Plug

FFP

Quick Connect, 3/8 inch x 3/8 inch tube.

-90 degree elbow is the shape.

UNIT UNIT PRICE ESTIMATED AMOUNT

1011 70 Each OPTION Pump

FFP

-6 foot long power cord -Self priming -four rubber like mounts for easy installation

UNIT UNIT PRICE ESTIMATED AMOUNT

1012 80 Each OPTION Socket

FFP

Quick connect, 3/8 inch x 3/8 inch.

-First end is a ¾ inch internal diameter quick disconnect that accepts 3/8 inch internal diameter couplings.

-Second end is threaded. 0.41 inches thread engagement, 18 threads per inch, 3/8 inch Nation Pipe Thread size.

-Total length is 2-11/16 inch long.

UNIT UNIT PRICE ESTIMATED AMOUNT

1013 3,000 Feet, Inches

OPTION Tubing

Nylobraid .75 inch -Polyester braid reinforced polyvinylchloride plastic is material -5.5 inch bend radius.

-3/16 inch thick walls -3/4 inch internal diameter -1-1/8 inch outer diameter

UNIT UNIT PRICE ESTIMATED AMOUNT

1014 3,000 Feet, Inches

Polyurethane, 3/8 Inch -Polyester braid reinforced polyurethane is material -Rated at 85A durometer -3/32 inch thick walls -3/8 inch internal diameter -9/16 inch outer diameter -Color is blue

UNIT UNIT PRICE ESTIMATED AMOUNT

1015 60 Each OPTION Valve

FFP

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

1016 200 Each OPTION Valve

FFP

Mixing, Shower -Flow rate is 2.5 gallons per minute

- ½ inch iron pipe size (IPS) connections -Finish is polished chrome

UNIT UNIT PRICE ESTIMATED AMOUNT

1017 100 Each OPTION Hose Splice//Mender

FFP

1 inch, barbed, aluminum.

Material is brass -Total length is 2.5 inches -Outer diameter of barb is 1.25 inches -Inner diameter of barb is 0.75 inches -Intended for 1 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

1018 200 Each OPTION Coupling

FFP

Hose, 1/4 inch. Brass.

-1.69 inch total length -1st connection is a plug tip for ¼ coupling size -2nd end is 9/16 inch outer diameter threaded connection.

-18 threads per inch for .40 thread engagement.

-1/4 inch National Pipe Thread Fuel male end -coupling must be a quick disconnect -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

1019 60 Each OPTION Coupling

FFP

Sleeve lock socket. Industrial, 3/8 inch X 3/8 inch NPT female. Brass.

-total length is 2.5 inches.

-3/8 inch National Pipe Thread Fuel pipe end -Coupling size is 3/8 inch -Seal material is nitrile -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

1020 100 Each OPTION Heater, Water

FFP

15.25 x 12.25 x 4.25. Must be brass.

-208 Volt -18,000 KiloWatt -50 amps/ phase -4 gallons per minute flow rate -Minimum pressure of 25 PSI, and maximum of 150 PSI.

-Entry points are ½ inch compression fittings located on the bottom of unit.

UNIT UNIT PRICE ESTIMATED AMOUNT

1021 60 Each OPTION Assembly

FFP

Power tee.

-See Drawing 9-1-0584 -anodized aluminum -brass is acceptable

UNIT UNIT PRICE ESTIMATED AMOUNT

1022 120 Each OPTION Assembly

FFP

Blow gun, 1/4 inch.

UNIT UNIT PRICE ESTIMATED AMOUNT

1023 50 Each OPTION Assembly

FFP

Hose -See Drawing 9-2-5022

UNIT UNIT PRICE ESTIMATED AMOUNT

1024 40 Each OPTION Assembly

FFP

Hose -See Drawing 9-2-9306 FOB: Destination

NSN: 9-2-9306-1

UNIT UNIT PRICE ESTIMATED AMOUNT

1025 40 Each OPTION Hose

FFP

Assembly.

-See drawing 9-2-9306

UNIT UNIT PRICE ESTIMATED AMOUNT

2001 300 Each OPTION Adapter Assembly

FFP

Air Compressor -3/8 inch x 1/4 inch.

-Brass.

-See Drawing 9-2-2155.

UNIT UNIT PRICE ESTIMATED AMOUNT

2002 100 Each OPTION Air Line

FFP

Compressor, 3/8 inch QDISC, Tee, 15 foot, M x M x F with female coupling.

UNIT UNIT PRICE ESTIMATED AMOUNT

2003 100 Each OPTION Bushing

FFP

UNIT UNIT PRICE ESTIMATED AMOUNT

2004 100 Each OPTION Fitting

FFP

3/8 inch barb x 1/4 inch MNPT. Brass -18 Threads per square inch -1.25 inch total length -0.40 inches thread engagement

UNIT UNIT PRICE ESTIMATED AMOUNT

2005 500 Each OPTION Flow Restricter

FFP

Shower head. Black delrin -material is a black Polyoxymethylene disk -Thickness is 1/8 inch -Outer diameter is ¾ inch -1/8 inch hole is drilled in center of disk

UNIT UNIT PRICE ESTIMATED AMOUNT

2006 100 Each OPTION Hose Barb

FFP

Hose Barb x MNPT swivel, .75 inches. Brass.

-For hose/pipe size ¾ inch National Pipe Thread Fuel -Maximum pressure is 120PSI at 72 degrees Fahrenheit -Temperature range is minus 40 degrees Fahrenheit to 160 degrees Fahrenheit.

-Thread engagement is 0.55 inches -14 threads per square inches -Seal material is rubber

UNIT UNIT PRICE ESTIMATED AMOUNT

2007 80 Each OPTION Hose Clamp

FFP

Worm drive, SAE #10, 1/2 inch band stainless steel.

-Material is stainless steel (301 or 305) -Clamp internal diameter range is 9/16 inch to 1-1/16 inch -Band width is ½ inch.

-Slotted Hexagonal screw for band is 5/16 inch size

UNIT UNIT PRICE ESTIMATED AMOUNT

2008 100 Each OPTION Hose Splice Mender

FFP

1/2 inch barbed. Brass -Total length is 2 inches -Outer diameter of barb is 0.72 inches -Inner diameter of barb is 0.38 inches -Intended for ½ inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

2009 100 Each OPTION Hose Splice Mender

FFP

3/4 inch barbed. Brass -Total length is 2.5 inches -Outer diameter of barb is 0.88 inches -Inner diameter of barb is 0.63 inches -Intended for 3/4 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

2010 100 Each OPTION Plug

FFP

Quick Connect, 3/8 inch x 3/8 inch tube.

-90 degree elbow is the shape.

UNIT UNIT PRICE ESTIMATED AMOUNT

2011 70 Each OPTION Pump

FFP

-6 foot long power cord -Self priming -four rubber like mounts for easy installation

UNIT UNIT PRICE ESTIMATED AMOUNT

2012 80 Each OPTION Socket

FFP

Quick connect, 3/8 inch x 3/8 inch.

-First end is a ¾ inch internal diameter quick disconnect that accepts 3/8 inch internal diameter couplings.

-Second end is threaded. 0.41 inches thread engagement, 18 threads per inch, 3/8 inch Nation Pipe Thread size.

-Total length is 2-11/16 inch long.

UNIT UNIT PRICE ESTIMATED AMOUNT

2013 3,000 Feet, Inches

Nylobraid .75 inch -Polyester braid reinforced polyvinylchloride plastic is material -5.5 inch bend radius.

-3/16 inch thick walls -3/4 inch internal diameter -1-1/8 inch outer diameter

UNIT UNIT PRICE ESTIMATED AMOUNT

2014 3,000 Feet, Inches

Polyurethane, 3/8 Inch -Polyester braid reinforced polyurethane is material -Rated at 85A durometer -3/32 inch thick walls -3/8 inch internal diameter -9/16 inch outer diameter -Color is blue

UNIT UNIT PRICE ESTIMATED AMOUNT

2015 60 Each OPTION Valve

FFP

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

2016 200 Each OPTION Valve

FFP

Mixing, Shower -Flow rate is 2.5 gallons per minute

- ½ inch iron pipe size (IPS) connections -Finish is polished chrome

UNIT UNIT PRICE ESTIMATED AMOUNT

2017 100 Each OPTION Hose Splice//Mender

FFP

1 inch, barbed, aluminum.

Material is brass -Total length is 2.5 inches -Outer diameter of barb is 1.25 inches -Inner diameter of barb is 0.75 inches -Intended for 1 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

2018 200 Each OPTION Coupling

FFP

Hose, 1/4 inch. Brass.

-1.69 inch total length -1st connection is a plug tip for ¼ coupling size -2nd end is 9/16 inch outer diameter threaded connection.

-18 threads per inch for .40 thread engagement.

-1/4 inch National Pipe Thread Fuel male end -coupling must be a quick disconnect -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

2019 60 Each OPTION Coupling

FFP

Sleeve lock socket. Industrial, 3/8 inch X 3/8 inch NPT female. Brass.

-total length is 2.5 inches.

-3/8 inch National Pipe Thread Fuel pipe end -Coupling size is 3/8 inch -Seal material is nitrile -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

2020 100 Each OPTION Heater, Water

FFP

15.25 x 12.25 x 4.25. Must be brass.

-208 Volt -18,000 KiloWatt -50 amps/ phase -4 gallons per minute flow rate -Minimum pressure of 25 PSI, and maximum of 150 PSI.

-Entry points are ½ inch compression fittings located on the bottom of unit.

UNIT UNIT PRICE ESTIMATED AMOUNT

2021 60 Each OPTION Assembly

FFP

Power tee.

-See Drawing 9-1-0584 -anodized aluminum -brass is acceptable

UNIT UNIT PRICE ESTIMATED AMOUNT

2022 120 Each OPTION Assembly

FFP

Blow gun, 1/4 inch.

UNIT UNIT PRICE ESTIMATED AMOUNT

2023 50 Each OPTION Assembly

FFP

Hose -See Drawing 9-2-5022

UNIT UNIT PRICE ESTIMATED AMOUNT

2024 40 Each OPTION Assembly

FFP

Hose -See Drawing 9-2-9306

UNIT UNIT PRICE ESTIMATED AMOUNT

2025 40 Each OPTION Hose

FFP

Assembly.

-See drawing 9-2-9306

UNIT UNIT PRICE ESTIMATED AMOUNT

3001 300 Each OPTION Adapter Assembly

FFP

Air Compressor -3/8 inch x 1/4 inch.

-Brass.

-See Drawing 9-2-2155.

UNIT UNIT PRICE ESTIMATED AMOUNT

3002 100 Each OPTION Air Line

FFP

Compressor, 3/8 inch QDISC, Tee, 15 foot, M x M x F with female coupling.

UNIT UNIT PRICE ESTIMATED AMOUNT

3003 100 Each OPTION Bushing

FFP

UNIT UNIT PRICE ESTIMATED AMOUNT

3004 100 Each OPTION Fitting

FFP

3/8 inch barb x 1/4 inch MNPT. Brass -18 Threads per square inch -1.25 inch total length -0.40 inches thread engagement

UNIT UNIT PRICE ESTIMATED AMOUNT

3005 500 Each OPTION Flow Restricter

FFP

Shower head. Black delrin -material is a black Polyoxymethylene disk -Thickness is 1/8 inch -Outer diameter is ¾ inch -1/8 inch hole is drilled in center of disk

FOB: Destination

NSN: 77678:18876

UNIT UNIT PRICE ESTIMATED AMOUNT

3006 100 Each OPTION Hose Barb

FFP

Hose Barb x MNPT swivel, .75 inches. Brass.

-For hose/pipe size ¾ inch National Pipe Thread Fuel -Maximum pressure is 120PSI at 72 degrees Fahrenheit -Temperature range is minus 40 degrees Fahrenheit to 160 degrees Fahrenheit.

-Thread engagement is 0.55 inches -14 threads per square inches -Seal material is rubber

UNIT UNIT PRICE ESTIMATED AMOUNT

3007 80 Each OPTION Hose Clamp

FFP

Worm drive, SAE #10, 1/2 inch band stainless steel.

-Material is stainless steel (301 or 305) -Clamp internal diameter range is 9/16 inch to 1-1/16 inch -Band width is ½ inch.

-Slotted Hexagonal screw for band is 5/16 inch size

UNIT UNIT PRICE ESTIMATED AMOUNT

3008 100 Each OPTION Hose Splice Mender

FFP

1/2 inch barbed. Brass -Total length is 2 inches -Outer diameter of barb is 0.72 inches -Inner diameter of barb is 0.38 inches -Intended for ½ inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

3009 100 Each OPTION Hose Splice Mender

FFP

3/4 inch barbed. Brass -Total length is 2.5 inches -Outer diameter of barb is 0.88 inches -Inner diameter of barb is 0.63 inches -Intended for 3/4 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

3010 100 Each OPTION Plug

FFP

Quick Connect, 3/8 inch x 3/8 inch tube.

-90 degree elbow is the shape.

UNIT UNIT PRICE ESTIMATED AMOUNT

3011 70 Each OPTION Pump

FFP

-6 foot long power cord -Self priming -four rubber like mounts for easy installation

UNIT UNIT PRICE ESTIMATED AMOUNT

3012 80 Each OPTION Socket

FFP

Quick connect, 3/8 inch x 3/8 inch.

-First end is a ¾ inch internal diameter quick disconnect that accepts 3/8 inch internal diameter couplings.

-Second end is threaded. 0.41 inches thread engagement, 18 threads per inch, 3/8 inch Nation Pipe Thread size.

-Total length is 2-11/16 inch long.

UNIT UNIT PRICE ESTIMATED AMOUNT

3013 3,000 Feet, Inches

Nylobraid .75 inch -Polyester braid reinforced polyvinylchloride plastic is material -5.5 inch bend radius.

-3/16 inch thick walls -3/4 inch internal diameter -1-1/8 inch outer diameter

UNIT UNIT PRICE ESTIMATED AMOUNT

3014 3,000 Feet, Inches

Polyurethane, 3/8 Inch -Polyester braid reinforced polyurethane is material -Rated at 85A durometer -3/32 inch thick walls -3/8 inch internal diameter -9/16 inch outer diameter -Color is blue

UNIT UNIT PRICE ESTIMATED AMOUNT

3015 60 Each OPTION Valve

FFP

UNIT UNIT PRICE ESTIMATED AMOUNT

3016 200 Each OPTION Valve

FFP

Mixing, Shower -Flow rate is 2.5 gallons per minute

- ½ inch iron pipe size (IPS) connections -Finish is polished chrome

UNIT UNIT PRICE ESTIMATED AMOUNT

3017 100 Each OPTION Hose Splice//Mender

FFP

1 inch, barbed, aluminum.

Material is brass -Total length is 2.5 inches -Outer diameter of barb is 1.25 inches -Inner diameter of barb is 0.75 inches -Intended for 1 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

3018 200 Each OPTION Coupling

FFP

Hose, 1/4 inch. Brass.

-1.69 inch total length -1st connection is a plug tip for ¼ coupling size -2nd end is 9/16 inch outer diameter threaded connection.

-18 threads per inch for .40 thread engagement.

-1/4 inch National Pipe Thread Fuel male end -coupling must be a quick disconnect -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

3019 60 Each OPTION Coupling

FFP

Sleeve lock socket. Industrial, 3/8 inch X 3/8 inch NPT female. Brass.

-total length is 2.5 inches.

-3/8 inch National Pipe Thread Fuel pipe end -Coupling size is 3/8 inch -Seal material is nitrile -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

3020 100 Each OPTION Heater, Water

FFP

15.25 x 12.25 x 4.25. Must be brass.

-208 Volt -18,000 KiloWatt -50 amps/ phase -4 gallons per minute flow rate -Minimum pressure of 25 PSI, and maximum of 150 PSI.

-Entry points are ½ inch compression fittings located on the bottom of unit.

UNIT UNIT PRICE ESTIMATED AMOUNT

3021 60 Each OPTION Assembly

FFP

Power tee.

-See Drawing 9-1-0584 -anodized aluminum -brass is acceptable

UNIT UNIT PRICE ESTIMATED AMOUNT

3022 120 Each OPTION Assembly

FFP

Blow gun, 1/4 inch.

UNIT UNIT PRICE ESTIMATED AMOUNT

3023 50 Each OPTION Assembly

FFP

Hose -See Drawing 9-2-5022

UNIT UNIT PRICE ESTIMATED AMOUNT

3024 40 Each OPTION Assembly

FFP

Hose -See Drawing 9-2-9306

UNIT UNIT PRICE ESTIMATED AMOUNT

3025 40 Each OPTION Hose

FFP

Assembly.

-See drawing 9-2-9306

UNIT UNIT PRICE ESTIMATED AMOUNT

4001 300 Each OPTION Adapter Assembly

FFP

Air Compressor -3/8 inch x 1/4 inch.

-Brass.

-See Drawing 9-2-2155.

UNIT UNIT PRICE ESTIMATED AMOUNT

4002 100 Each OPTION Air Line

FFP

Compressor, 3/8 inch QDISC, Tee, 15 foot, M x M x F with female coupling.

UNIT UNIT PRICE ESTIMATED AMOUNT

4003 100 Each OPTION Bushing

FFP

UNIT UNIT PRICE ESTIMATED AMOUNT

4004 100 Each OPTION Fitting

FFP

3/8 inch barb x 1/4 inch MNPT. Brass -18 Threads per square inch -1.25 inch total length -0.40 inches thread engagement

UNIT UNIT PRICE ESTIMATED AMOUNT

4005 500 Each OPTION Flow Restricter

FFP

Shower head. Black delrin -material is a black Polyoxymethylene disk -Thickness is 1/8 inch -Outer diameter is ¾ inch -1/8 inch hole is drilled in center of disk

UNIT UNIT PRICE ESTIMATED AMOUNT

4006 100 Each OPTION Hose Barb

FFP

Hose Barb x MNPT swivel, .75 inches. Brass.

-For hose/pipe size ¾ inch National Pipe Thread Fuel -Maximum pressure is 120PSI at 72 degrees Fahrenheit -Temperature range is minus 40 degrees Fahrenheit to 160 degrees Fahrenheit.

-Thread engagement is 0.55 inches -14 threads per square inches -Seal material is rubber

UNIT UNIT PRICE ESTIMATED AMOUNT

4007 80 Each OPTION Hose Clamp

FFP

Worm drive, SAE #10, 1/2 inch band stainless steel.

-Material is stainless steel (301 or 305) -Clamp internal diameter range is 9/16 inch to 1-1/16 inch -Band width is ½ inch.

-Slotted Hexagonal screw for band is 5/16 inch size

UNIT UNIT PRICE ESTIMATED AMOUNT

4008 100 Each OPTION Hose Splice Mender

FFP

1/2 inch barbed. Brass -Total length is 2 inches -Outer diameter of barb is 0.72 inches -Inner diameter of barb is 0.38 inches -Intended for ½ inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

4009 100 Each OPTION Hose Splice Mender

FFP

3/4 inch barbed. Brass -Total length is 2.5 inches -Outer diameter of barb is 0.88 inches -Inner diameter of barb is 0.63 inches -Intended for 3/4 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

4010 100 Each OPTION Plug

FFP

Quick Connect, 3/8 inch x 3/8 inch tube.

-90 degree elbow is the shape.

UNIT UNIT PRICE ESTIMATED AMOUNT

4011 70 Each OPTION Pump

FFP

-6 foot long power cord -Self priming -four rubber like mounts for easy installation

UNIT UNIT PRICE ESTIMATED AMOUNT

4012 80 Each OPTION Socket

FFP

Quick connect, 3/8 inch x 3/8 inch.

-First end is a ¾ inch internal diameter quick disconnect that accepts 3/8 inch internal diameter couplings.

-Second end is threaded. 0.41 inches thread engagement, 18 threads per inch, 3/8 inch Nation Pipe Thread size.

-Total length is 2-11/16 inch long.

UNIT UNIT PRICE ESTIMATED AMOUNT

4013 3,000 Feet, Inches

Nylobraid .75 inch -Polyester braid reinforced polyvinylchloride plastic is material -5.5 inch bend radius.

-3/16 inch thick walls -3/4 inch internal diameter -1-1/8 inch outer diameter

UNIT UNIT PRICE ESTIMATED AMOUNT

4014 3,000 Feet, Inches

Polyurethane, 3/8 Inch -Polyester braid reinforced polyurethane is material -Rated at 85A durometer -3/32 inch thick walls -3/8 inch internal diameter -9/16 inch outer diameter -Color is blue

UNIT UNIT PRICE ESTIMATED AMOUNT

4015 60 Each OPTION Valve

FFP

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

4016 200 Each OPTION Valve

FFP

Mixing, Shower -Flow rate is 2.5 gallons per minute

- ½ inch iron pipe size (IPS) connections -Finish is polished chrome

UNIT UNIT PRICE ESTIMATED AMOUNT

4017 100 Each OPTION Hose Splice//Mender

FFP

1 inch, barbed, aluminum.

Material is brass -Total length is 2.5 inches -Outer diameter of barb is 1.25 inches -Inner diameter of barb is 0.75 inches -Intended for 1 inch internal diameter hoses -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

4018 200 Each OPTION Coupling

FFP

Hose, 1/4 inch. Brass.

-1.69 inch total length -1st connection is a plug tip for ¼ coupling size -2nd end is 9/16 inch outer diameter threaded connection.

-18 threads per inch for .40 thread engagement.

-1/4 inch National Pipe Thread Fuel male end -coupling must be a quick disconnect -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

4019 60 Each OPTION Coupling

FFP

Sleeve lock socket. Industrial, 3/8 inch X 3/8 inch NPT female. Brass.

-total length is 2.5 inches.

-3/8 inch National Pipe Thread Fuel pipe end -Coupling size is 3/8 inch -Seal material is nitrile -Shape is straight

UNIT UNIT PRICE ESTIMATED AMOUNT

4020 100 Each OPTION Heater, Water

FFP

15.25 x 12.25 x 4.25. Must be brass.

-208 Volt -18,000 KiloWatt -50 amps/ phase -4 gallons per minute flow rate -Minimum pressure of 25 PSI, and maximum of 150 PSI.

-Entry points are ½ inch compression fittings located on the bottom of unit.

UNIT UNIT PRICE ESTIMATED AMOUNT

4021 60 Each OPTION Assembly

FFP

Power tee.

-See Drawing 9-1-0584 -anodized aluminum -brass is acceptable

UNIT UNIT PRICE ESTIMATED AMOUNT

4022 120 Each OPTION Assembly

FFP

Blow gun, 1/4 inch.

UNIT UNIT PRICE ESTIMATED AMOUNT

4023 50 Each OPTION Assembly

FFP

Hose -See Drawing 9-2-5022

UNIT UNIT PRICE ESTIMATED AMOUNT

4024 40 Each OPTION Assembly

FFP

Hose -See Drawing 9-2-9306

UNIT UNIT PRICE ESTIMATED AMOUNT

4025 40 Each OPTION Hose

FFP

Assembly.

-See drawing 9-2-9306

NOTES

1. System for Award Management (SAM): In accordance with FAR 4.1102, Offerors must be registered in the SAM database in order to be eligible for contract award. No award will be made to an Offeror not registered.

Registration can be accomplished at https://www.sam.gov/portal/public/SAM/. Registration in this database must be kept current.

2. Annual Representations and Certifications: In accordance with FAR 4.1201, Offerors shall complete electronic annual representations and certifications within SAM as part of required registration. Registration in this database must be kept current and can be accessed at https://www.sam.gov/portal/public/SAM/

3. Questions: Questions regarding this solicitation shall be submitted to the Contract Specialist, in writing, at least 5 calendar days prior to the closing date. Questions submitted after this time will be answered at the discretion of the Contracting Officer. The Contracting Officer for this action is Gary Weir. Contract Specialist is Laura Buehler, email: Laura.J.Bueher.civ@mail.mil.

4. Award without Discussions: The Government intends to award without discussions; therefore Offerors should submit their best prices in their initial offer. IAW FAR provision 52.212-2, Evaluation-Commercial Items, Offerors must submit all information requested therein in order for the Government to determine technical acceptability.

Contractors must submit: past performance relating to the same or similar supply and delivery. Contractors quoting on an equal product must submit sufficient descriptive literature the show the product meets the minimum specifications.Contractors who fail to submit all required information shall be considered nonresponsive and shall not be considered for award.

5. Contractors not registered in SAM and showing a valid/current certification in the electronic annual representations and certifications must complete all solicitation clauses and provisions that require contractor information: FAR 52.204-17, FAR, 52.209-5, FAR 209-7, FAR 52.212-3 Alt 1, FAR 52.219-1 Alt 1, FAR 52.222-25. Contractors who fail to fill in all information requested shall be considered nonresponsive and shall not be considered for award.

6. Amendments: The Offeror shall submit to the Contracting Officer signed copies of all amendments issued to this solicitation. Failure to comply may cause your proposal to be rejected.

7. Payment: Payment for this action will be made by Electronic Funds Transfer (EFT) through the Defense Finance information.

8. Period for Acceptance of Offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers.

9. Proposals: Proposals shall be signed by an authorized individual in accordance with FAR 4.102, Contractor’s Signature. Failure to comply may cause your proposal to be rejected. Offerors should mark each page of their proposal as "Proprietary Information" if they want it treated as Proprietary Information under the Procurement Integrity Act.

10. FOB Destination: Unless otherwise stated in the solicitation, Offerors shall provide FOB Destination prices.

11. Type of Contract: The type of contract resulting from this solicitation is specified in FAR Provision 52.216-1, Type of Contract. For Requirements contracts all quantities are estimated and individual delivery orders shall be issued citing specific quantities and delivery dates. Payment will be made on actual quantities delivered.

12. Submit proposals. Proposals may be submitted via email to the Contract Specialist:

Laura.J.Buehler.civ@mail.mil, via fax: 717-267-9834 Attn: Laura Buehler, or mailed to the address in Block 9 on the front of the SF1449 Attn: Laura Buehler. Email is the perferred method for submittal.

13. AMC-Level Protest Program. Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer. However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the General Accountability Office (GAO), or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in Federal Acquisition Regulation 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below.

Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil

The AMC-level protest procedures are found at:

www.amc.army.mil/amc/commandcounsel.html

If internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest Procedures.

14. MARKING OF SUPPLIES (Delivery Order). Items shall be shipped to the addresses specified in each Delivery Order. All shipments shall be marked with the contract and delivery order number(s).

15. ACCELERATED DELIVERY. The Government normally desires maximum acceleration of deliveries provided such acceleration is at no additional cost to the Government. However, prior to acceleration of delivery, approval must be obtained from the Procuring Contracting Officer. Acceleration in the delivery of end items will not be acceptable to the Government unless all other scheduled deliveries relating to contract items such as provisioning, technical documentation, drawings, publications, overpack kits, etc., are accelerated by an equal period of time.

16. DELIVERIES AND PACKING SLIPS. All deliveries shall be shipped to the addresses specified in Block 15 and include a packing list that references the contract/order number. This applies to packing slips from 3rd party/drop ship vendors. Failure to include the contract/order number in the packing list will result in payment delays and the possibility of rejected deliveries.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government

0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government 0021 Destination Government Destination Government 0022 Destination Government Destination Government 0023 Destination Government Destination Government 0024 Destination Government Destination Government 0025 Destination Government Destination Government 1001 Destination Government Destination Government 1002 Destination Government Destination Government 1003 Destination Government Destination Government 1004 Destination Government Destination Government 1005 Destination Government Destination Government 1006 Destination Government Destination Government 1007 Destination Government Destination Government 1008 Destination Government Destination Government 1009 Destination Government Destination Government 1010 Destination Government Destination Government 1011 Destination Government Destination Government 1012 Destination Government Destination Government 1013 Destination Government Destination Government 1014 Destination Government Destination Government 1015 Destination Government Destination Government 1016 Destination Government Destination Government 1017 Destination Government Destination Government 1018 Destination Government Destination Government 1019 Destination Government Destination Government 1020 Destination Government Destination Government 1021 Destination Government Destination Government 1022 Destination Government Destination Government 1023 Destination Government Destination Government 1024 Destination Government Destination Government 1025 Destination Government Destination Government 2001 Destination Government Destination Government 2002 Destination Government Destination Government 2003 Destination Government Destination Government 2004 Destination Government Destination Government 2005 Destination Government Destination Government 2006 Destination Government Destination Government 2007 Destination Government Destination Government 2008 Destination Government Destination Government 2009 Destination Government Destination Government 2010 Destination Government Destination Government 2011 Destination Government Destination Government 2012 Destination Government Destination Government 2013 Destination Government Destination Government 2014 Destination Government Destination Government 2015 Destination Government Destination Government 2016 Destination Government Destination Government

2017 Destination Government Destination Government 2018 Destination Government Destination Government 2019 Destination Government Destination Government 2020 Destination Government Destination Government 2021 Destination Government Destination Government 2022 Destination Government Destination Government 2023 Destination Government Destination Government 2024 Destination Government Destination Government 2025 Destination Government Destination Government 3001 Destination Government Destination Government 3002 Destination Government Destination Government 3003 Destination Government Destination Government 3004 Destination Government Destination Government 3005 Destination Government Destination Government 3006 Destination Government Destination Government 3007 Destination Government Destination Government 3008 Destination Government Destination Government 3009 Destination Government Destination Government 3010 Destination Government Destination Government 3011 Destination Government Destination Government 3012 Destination Government Destination Government 3013 Destination Government Destination Government 3014 Destination Government Destination Government 3015 Destination Government Destination Government 3016 Destination Government Destination Government 3017 Destination Government Destination Government 3018 Destination Government Destination Government 3019 Destination Government Destination Government 3020 Destination Government Destination Government 3021 Destination Government Destination Government 3022 Destination Government Destination Government 3023 Destination Government Destination Government 3024 Destination Government Destination Government 3025 Destination Government Destination Government 4001 Destination Government Destination Government 4002 Destination Government Destination Government 4003 Destination Government Destination Government 4004 Destination Government Destination Government 4005 Destination Government Destination Government 4006 Destination Government Destination Government 4007 Destination Government Destination Government 4008 Destination Government Destination Government 4009 Destination Government Destination Government 4010 Destination Government Destination Government 4011 Destination Government Destination Government 4012 Destination Government Destination Government 4013 Destination Government Destination Government 4014 Destination Government Destination Government 4015 Destination Government Destination Government 4016 Destination Government Destination Government 4017 Destination Government Destination Government 4018 Destination Government Destination Government 4019 Destination Government Destination Government 4020 Destination Government Destination…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.