0001.pdf

PDF 100 KB Posted Feb 28, 2017

Attached to: Plumbing Supplies Federal contract opportunity
Solicitation number: W911N2-17-R-0009
Issued by: Department of the Army Materiel Command Contracting Command Redstone Arsenal

About this file

From the source

amendment 0001

View the file

Other files for this federal contract opportunity

Other files attached to Plumbing Supplies, newest first.
File	Type	Posted
conformed_RFP.pdf	PDF	Feb 28, 2017
drawing_9-2-5191_(REF_9-2-5022)_W25G1Q6106R001.PDF	PDF	Feb 28, 2017
drawing_9-2-9306_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-1-0584PL1_RevB_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-1-0584sht2revC_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-2-5191_(REF_9-2-5022)_W25G1Q6106R001.PDF	PDF	Feb 14, 2017
sol_W911N2-17-R-0009.pdf	PDF	Feb 14, 2017
drawing_9-1-0584S1_RevC_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-1-0584PL2_RevB_W25G1Q6106R001.pdf	PDF	Feb 14, 2017
drawing_9-2-2155_W25G1Q6106R001.PDF	PDF	Feb 14, 2017

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

LAURA BUEHLER

717-267-9617

LETTERKENNY CONTRACTING OFFICE - ACC

1 OVERCASH AVENUE CCAM-ALK BLDG 2S

CHAMBERSBURG PA 17201

W25G1Q6106R001

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Purpose of this amendment is to answ er questions. Part numbers have been added to CLINs. Closing date is changed to 6 Mar 17, 4:00 P.M..

See Summary of Changes. Please use the conformed copy of the solicitation to provide pricing.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 34

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 28-Feb-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W911N2-17-R-0009

X 9B. DATED (SEE ITEM 11)

14-Feb-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

28-Feb-2017

CODE

LETTERKENNY ARMY DEPOT

LETTERKENNY CONTRACTING OFFICE - ACC

1 OVERCASH AVENUE, ATTN: CCAM-ALK, BLDG 2S

CHAMBERSBURG PA 17201-4150

W911N2 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W911N2

FACILITY CODECODE

EMAIL:TEL:

W911N2-17-R-0009

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by reference:

52.211-6 Brand Name or Equal AUG 1999

The following have been added by full text:

QUESTIONS AND ANSWERS

Q1. I have a question in reference to the above mentioned solicitation. Item 1021 Power Tee Assembly states to see drawing 9-1-0584. There are two drawings in this package with the same number. Could you tell me if we are to quote the -2 or the -1 on the parts list of components?

A1. -2

Q2. Item # 0010 - Do you have a manufacturer part number?

A2.See the revised CLINs.

Q3. Item # 0011 - Do you have a manufacturer part number?

A3. See the revised CLINs.

Q4. Item # 0012 - Do you have a manufacturer part number?

A4. See the revised CLINs.

Q5. Item # 0016 - Do you have a manufacturer part number?

A5. See the revised CLINs.

Q6. Item # 0018 - Do you have a manufacturer part number?

A6. See the revised CLINs.

Q7. Item # 0019 - Do you have a manufacturer part number?

A7. See the revised CLINs.

Q8. Item # 0020 - Do you have a manufacturer part number?

A8. See the revised CLINs.

Q9. Is there a drawing 9-2-5022 for CLIN 0023?

A9. Drawings 9-2-5191 and 9-2-5022 are the same. Please use drawing 9-2-5191 (REF 9-2-5022)

Q10. Where will the destination be? Will it be one destination or could it be multiple destinations?

A10. All parts will ship to Letterkenny Army Depot, Chambersburg PA 17201.

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 03-Mar-2017 04:00 PM to 06-Mar-

2007 04:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

Air Compressor-3/8 inch x 1/4 inch. -Brass. -See Drawing 9-2-2155.

To:

Air Compressor-3/8 inch x 1/4 inch. -Brass. -See Drawing 9-2-2155.-9-2-2155:81337 or equal.

CLIN 0002

Compressor, 3/8 inch QDISC, Tee, 15 foot, M x M x F with female coupling. -1 each steel, 3/8 in body, hose barb nipple, ½ port, 300 psi-2 each, 3/8 in body, ½ National Pipe Thread Fuel female, 20 series, steel, quick disconnect-hose ferrule (2 each), 1 inch length, .812 internal diameter, brass-15 foot hose meeting characteristics: PVC/vinyl composition reinforced by polyester yarn, temperature range of minus 5 degrees F to 150 degrees F, ½ inch internal diameter, 0.8 inch outer diameter, MAX PSI of 300, 17 inch vacuum rating, minimum bend radius of 1.5 inches

To:

CLIN 0003

3/8 inch FNPT x 1/2 inch MNPT. Brass-14 Threads per square inch-1 inch Total Length-0.53 inches thread engagement-Connection is National Pipe Thread Fuel Male × National Pipe Thread Fuel Female-Material is Nickel Plated brass-Body shape is Hexagonal

To:

CLIN 0004

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread engagement

To:

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread engagement-44555K133:39428 or equal.

CLIN 0005

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾ inch-1/8 inch hole is drilled in center of disk

To:

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾ inch-1/8 inch hole is drilled in center of disk-77678:18876 or equal.

CLIN 0006

Hose Barb x MNPT swivel, .75 inches. Brass.-For hose/pipe size ¾ inch National Pipe Thread Fuel -Maximum pressure is 120PSI at 72 degrees Fahrenheit-Temperature range is minus 40 degrees Fahrenheit to 160 degrees Fahrenheit.-Thread engagement is 0.55 inches-14 threads per square inches-Seal material is rubber

To:

CLIN 0007

Worm drive, SAE #10, 1/2 inch band stainless steel.-Material is stainless steel (301 or 305)-Clamp internal diameter range is 9/16 inch to 1-1/16 inch-Band width is ½ inch.-Slotted Hexagonal screw for band is 5/16 inch size

To:

CLIN 0008

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38 inches-Intended for ½ inch internal diameter hoses-Shape is straight

To:

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38 inches-Intended for ½ inch internal diameter hoses-Shape is straight-91355K85:39428 or equal.

CLIN 0009

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

0.63 inches-Intended for 3/4 inch internal diameter hoses-Shape is straight

To:

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

0.63 inches-Intended for 3/4 inch internal diameter hoses-Shape is straight-91355K87:39428 or equal.

CLIN 0010

Quick Connect, 3/8 inch x 3/8 inch tube.-90 degree elbow is the shape.-Material is Polypropylene-Maximum PSI is 60-Barbed fitting outer diameter is 7/16 inch which needs to accommodate 3/8 inch tubing-Quick disconnect fitting outer diameter is ¾ inch which needs to accommodate 3/8 inch tubing

To:

CLIN 0011

Inlet water, Potable, 15 A, -115 Volts Alternating Current-4.5 gallons per minute flow rate-3.75 inches high-6.3 inches wide-9.9 inches long-40 pounds per square in switch-2 each ¾ inch hose barb ports. Ports are snap in style.-6 foot long power cord-Self priming-four rubber like mounts for easy installation

To:

CLIN 0012

Quick connect, 3/8 inch x 3/8 inch. -First end is a ¾ inch internal diameter quick disconnect that accepts 3/8 inch internal diameter couplings.-Second end is threaded. 0.41 inches thread engagement, 18 threads per inch, 3/8 inch Nation Pipe Thread size.-Total length is 2-11/16 inch long.-60 PSI maximum pressure.-Polypropylene material.

To:

CLIN 0013

Nylobraid .75 inch-Polyester braid reinforced polyvinylchloride plastic is material-5.5 inch bend radius.-3/16 inch thick walls-3/4 inch internal diameter-1-1/8 inch outer diameter

To:

Nylobraid .75 inch-Polyester braid reinforced polyvinylchloride plastic is material-5.5 inch bend radius.-3/16 inch thick walls-3/4 inch internal diameter-1-1/8 inch outer diameter-5238K668:39428 or equal.

CLIN 0014

Polyurethane, 3/8 Inch-Polyester braid reinforced polyurethane is material-Rated at 85A durometer-3/32 inch thick walls-3/8 inch internal diameter-9/16 inch outer diameter-Color is blue

Polyurethane, 3/8 Inch-Polyester braid reinforced polyurethane is material-Rated at 85A durometer-3/32 inch thick walls-3/8 inch internal diameter-9/16 inch outer diameter-Color is blue-5545K18:39428 or equal.

CLIN 0015

The NSN 4796K73:39428 has been deleted.

The CLIN extended description has changed from:

Ball, 3/8 inch, barbed-Total length is 3-3/16 inches-Accepts internal tube diameters of 3/8 inch-Male X Male style connection-Seal and seat gaskets are nitrile-Body make up is nylon-Ball composition is polypropylene

To:

CLIN 0016

Mixing, Shower-Flow rate is 2.5 gallons per minute- ½ inch iron pipe size (IPS) connections-Finish is polished chrome

To:

Mixing, Shower-Flow rate is 2.5 gallons per minute- ½ inch iron pipe size (IPS) connections-Finish is polished chrome-S-96-1-IPS:02977 or equal.

CLIN 0017

1 inch, barbed, aluminum.Material is brass-Total length is 2.5 inches-Outer diameter of barb is 1.25 inches-Inner diameter of barb is 0.75 inches-Intended for 1 inch internal diameter hoses-Shape is straight

To:

CLIN 0018

Hose, 1/4 inch. Brass.-1.69 inch total length-1st connection is a plug tip for ¼ coupling size-2nd end is 9/16 inch outer diameter threaded connection.-18 threads per inch for .40 thread engagement.-1/4 inch National Pipe Thread Fuel male end-coupling must be a quick disconnect-Shape is straight

CLIN 0019

Sleeve lock socket. Industrial, 3/8 inch X 3/8 inch NPT female. Brass.-total length is 2.5 inches.-3/8 inch National Pipe Thread Fuel pipe end-Coupling size is 3/8 inch-Seal material is nitrile-Shape is straight

To:

CLIN 0020

15.25 x 12.25 x 4.25. Must be brass.-208 Volt-18,000 KiloWatt-50 amps/ phase-4 gallons per minute flow rate- Minimum pressure of 25 PSI, and maximum of 150 PSI.-Entry points are ½ inch compression fittings located on the bottom of unit.

To:

CLIN 0021

Power tee. -See Drawing 9-1-0584-anodized aluminum-brass is acceptable

Power tee. -See Drawing 9-1-0584-anodized aluminum-brass is acceptable-9-1-0584-2:81337 or equal.

CLIN 0022

The NSN 5369K51:39428 has been deleted.

The CLIN extended description has changed from:

Blow gun, 1/4 inch. -air inlet is for ¼ inch female pipe size-Nozzle length is 1.5 inches-maximum inlet pressure is 150 PSI-air outlet is 1/8 inch female pipe size-Nozzle is zinc-Body is chrome plated zinc-must be brass

CLIN 0023

Hose-See Drawing 9-2-5022

Hose-See Drawing 9-2-5022 or equal.

CLIN 0024

The NSN 9-2-9306-1 has been deleted.

The CLIN extended description has changed from:

Hose-See Drawing 9-2-9306

Hose-See Drawing 9-2-9306 or equal.

CLIN 0025

Assembly.-See drawing 9-2-9306

Assembly.-See drawing 9-2-9306 or equal.

CLIN 1001

Air Compressor-3/8 inch x 1/4 inch. -Brass. -See Drawing 9-2-2155.

CLIN 1002

To:

CLIN 1003

To:

CLIN 1004

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread engagement

To:

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread

CLIN 1005

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾ inch-1/8 inch hole is drilled in center of disk

To:

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾

CLIN 1006

To:

CLIN 1007

To:

CLIN 1008

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38 inches-Intended for ½ inch internal diameter hoses-Shape is straight

To:

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38

CLIN 1009

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

0.63 inches-Intended for 3/4 inch internal diameter hoses-Shape is straight

To:

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

CLIN 1010

To:

CLIN 1011

To:

CLIN 1012

To:

CLIN 1013

Nylobraid .75 inch-Polyester braid reinforced polyvinylchloride plastic is material-5.5 inch bend radius.-3/16 inch thick walls-3/4 inch internal diameter-1-1/8 inch outer diameter

Nylobraid .75 inch-Polyester braid reinforced polyvinylchloride plastic is material-5.5 inch bend radius.-3/16 inch

CLIN 1014

Polyurethane, 3/8 Inch-Polyester braid reinforced polyurethane is material-Rated at 85A durometer-3/32 inch thick walls-3/8 inch internal diameter-9/16 inch outer diameter-Color is blue

To:

Polyurethane, 3/8 Inch-Polyester braid reinforced polyurethane is material-Rated at 85A durometer-3/32 inch thick

CLIN 1015

The CLIN extended description has changed from:

To:

CLIN 1016

Mixing, Shower-Flow rate is 2.5 gallons per minute- ½ inch iron pipe size (IPS) connections-Finish is polished chrome

To:

Mixing, Shower-Flow rate is 2.5 gallons per minute- ½ inch iron pipe size (IPS) connections-Finish is polished

CLIN 1017

CLIN 1018

To:

CLIN 1019

To:

CLIN 1020

To:

CLIN 1021

Power tee. -See Drawing 9-1-0584-anodized aluminum-brass is acceptable

CLIN 1022

To:

CLIN 1023

Hose-See Drawing 9-2-5022

CLIN 1024

The NSN 9-2-9306-1 has been deleted.

The CLIN extended description has changed from:

Hose-See Drawing 9-2-9306

CLIN 1025

Assembly.-See drawing 9-2-9306

CLIN 2001

Air Compressor-3/8 inch x 1/4 inch. -Brass. -See Drawing 9-2-2155.

CLIN 2002

To:

CLIN 2003

To:

CLIN 2004

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread engagement

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread

CLIN 2005

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾ inch-1/8 inch hole is drilled in center of disk

To:

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾

CLIN 2006

To:

CLIN 2007

To:

CLIN 2008

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38 inches-Intended for ½ inch internal diameter hoses-Shape is straight

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38

CLIN 2009

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

0.63 inches-Intended for 3/4 inch internal diameter hoses-Shape is straight

To:

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

CLIN 2010

To:

CLIN 2011

To:

CLIN 2012

CLIN 2013

Nylobraid .75 inch-Polyester braid reinforced polyvinylchloride plastic is material-5.5 inch bend radius.-3/16 inch thick walls-3/4 inch internal diameter-1-1/8 inch outer diameter

To:

Nylobraid .75 inch-Polyester braid reinforced polyvinylchloride plastic is material-5.5 inch bend radius.-3/16 inch

CLIN 2014

Polyurethane, 3/8 Inch-Polyester braid reinforced polyurethane is material-Rated at 85A durometer-3/32 inch thick walls-3/8 inch internal diameter-9/16 inch outer diameter-Color is blue

To:

Polyurethane, 3/8 Inch-Polyester braid reinforced polyurethane is material-Rated at 85A durometer-3/32 inch thick

CLIN 2015

The CLIN extended description has changed from:

To:

CLIN 2016

Mixing, Shower-Flow rate is 2.5 gallons per minute- ½ inch iron pipe size (IPS) connections-Finish is polished chrome

Mixing, Shower-Flow rate is 2.5 gallons per minute- ½ inch iron pipe size (IPS) connections-Finish is polished

CLIN 2017

To:

CLIN 2018

To:

CLIN 2019

To:

CLIN 2020

15.25 x 12.25 x 4.25. Must be brass.-208 Volt-18,000 KiloWatt-50 amps/ phase-4 gallons per minute flow rate-

Minimum pressure of 25 PSI, and maximum of 150 PSI.-Entry points are ½ inch compression fittings located on the bottom of unit.

To:

CLIN 2021

Power tee. -See Drawing 9-1-0584-anodized aluminum-brass is acceptable

CLIN 2022

To:

CLIN 2023

Hose-See Drawing 9-2-5022

CLIN 2024

Hose-See Drawing 9-2-9306

CLIN 2025

Assembly.-See drawing 9-2-9306

CLIN 3001

Air Compressor-3/8 inch x 1/4 inch. -Brass. -See Drawing 9-2-2155.

CLIN 3002

To:

CLIN 3003

CLIN 3004

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread engagement

To:

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread

CLIN 3005

The NSN 77678:18876 has been deleted.

The CLIN extended description has changed from:

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾ inch-1/8 inch hole is drilled in center of disk

To:

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾

CLIN 3006

To:

CLIN 3007

CLIN 3008

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38 inches-Intended for ½ inch internal diameter hoses-Shape is straight

To:

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38

CLIN 3009

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

0.63 inches-Intended for 3/4 inch internal diameter hoses-Shape is straight

To:

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

CLIN 3010

To:

CLIN 3011

CLIN 3012

To:

CLIN 3013

Nylobraid .75 inch-Polyester braid reinforced polyvinylchloride plastic is material-5.5 inch bend radius.-3/16 inch thick walls-3/4 inch internal diameter-1-1/8 inch outer diameter

To:

Nylobraid .75 inch-Polyester braid reinforced polyvinylchloride plastic is material-5.5 inch bend radius.-3/16 inch

CLIN 3014

Polyurethane, 3/8 Inch-Polyester braid reinforced polyurethane is material-Rated at 85A durometer-3/32 inch thick walls-3/8 inch internal diameter-9/16 inch outer diameter-Color is blue

To:

Polyurethane, 3/8 Inch-Polyester braid reinforced polyurethane is material-Rated at 85A durometer-3/32 inch thick

CLIN 3015

CLIN 3016

Mixing, Shower-Flow rate is 2.5 gallons per minute- ½ inch iron pipe size (IPS) connections-Finish is polished chrome

To:

Mixing, Shower-Flow rate is 2.5 gallons per minute- ½ inch iron pipe size (IPS) connections-Finish is polished

CLIN 3017

To:

CLIN 3018

To:

CLIN 3019

Sleeve lock socket. Industrial, 3/8 inch X 3/8 inch NPT female. Brass.-total length is 2.5 inches.-3/8 inch National

Pipe Thread Fuel pipe end-Coupling size is 3/8 inch-Seal material is nitrile-Shape is straight

CLIN 3020

To:

CLIN 3021

Power tee. -See Drawing 9-1-0584-anodized aluminum-brass is acceptable

CLIN 3022

To:

CLIN 3023

Hose-See Drawing 9-2-5022

CLIN 3024

Hose-See Drawing 9-2-9306

CLIN 3025

Assembly.-See drawing 9-2-9306

CLIN 4001

Air Compressor-3/8 inch x 1/4 inch. -Brass. -See Drawing 9-2-2155.

CLIN 4002

To:

CLIN 4003

To:

CLIN 4004

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread engagement

To:

3/8 inch barb x 1/4 inch MNPT. Brass-18 Threads per square inch-1.25 inch total length-0.40 inches thread

CLIN 4005

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾ inch-1/8 inch hole is drilled in center of disk

To:

Shower head. Black delrin-material is a black Polyoxymethylene disk-Thickness is 1/8 inch-Outer diameter is ¾

CLIN 4006

CLIN 4007

To:

CLIN 4008

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38 inches-Intended for ½ inch internal diameter hoses-Shape is straight

To:

1/2 inch barbed. Brass-Total length is 2 inches-Outer diameter of barb is 0.72 inches-Inner diameter of barb is 0.38

CLIN 4009

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

0.63 inches-Intended for 3/4 inch internal diameter hoses-Shape is straight

To:

3/4 inch barbed. Brass-Total length is 2.5 inches-Outer diameter of barb is 0.88 inches-Inner diameter of barb is

CLIN 4010

Quick Connect, 3/8 inch x 3/8 inch tube.-90 degree elbow is the shape.-Material is Polypropylene-Maximum PSI is 60-Barbed fitting outer diameter is 7/16 inch which needs to accommodate 3/8 inch…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.