drawing_9-2-9306_W25G1Q6106R001.pdf

DISTRIBUTION STATEMENT A

THIS DOCUMENT IS APPROVED FOR PUBLIC RELEASE: DISTRIBUTION IS UNLIMITED

1/16 .015 .015

.XX

.XXX

SHALL ONLY BE INCORPORATED AS

IS MAINTAINED BY A CAD SYSTEM. CHANGES

THIS DRAWING HAS BEEN GENERATED AND

DIRECTED BY THE DESIGN ACTIVITY.

L 1/2"

C

8 2

2 2X

7 9

AR

AR

AR

AR

AR

6 10

AR

AR

AR

AR

AR

-1 AND -2

-NO L LTR POSITION

-1 37.0 C SINK, FRONT

-2 28.0 F SINK, BACK

-3 25.8 H URINAL, FRONT

-4 39.5 J URINAL, BACK

Item PART NO. CAGE Description -1 Qty -2 Qty -3 Qty -4 Qty

1 20016822 73842 Hose, Suction and Discharge (Versiflo), 1-1/2" ID x 1.87" OD, Versigard tube and cover, black w/ blue stripe, -25 to 200 deg F

3.3

FT

2.3

FT

2.5

FT

3.3

FT

2 54225K58 3A054 Hose Clamp, Worm-Drive, SAE #24, 1-5/16" to 2-1/4" dia. x 1/2" wide st. stl w st. stl screw (or equivalent) 2 2 2 2

3 15C-GRP 33813 Coupler, Cam & Groove, Type C Glass Reinforced Polypropylene, 1-1/2" C&G X 1-1/2" Hose Barb, Dimension IAW A-A-59326 1 1 1 1

4 15B-GRP 33813 Coupler, Cam & Groove, Type B Glass-Reinforced Polypropylene, 1-1/2" C&G X 1-1/2" MPT, dimensions IAW A-A-59326 1 1 1 1

5 D105-015 62531 Adapter, Cleanout Fitting, 1-1/2", Spigot X FPT, PVC-DWV 2 2 2 2 6 D706-016 62531 P-Trap, 1-1/2", H X H, Low Profile, PVC-DWV 1 1 1 1

7 1436-015 62531 ADAPTER, HOSE, STRAIGHT MALE, 1-1/2" HOSE BARB x 1-1/2" MPT, PVC 1 1 1 1

8 9-2-9167-3 81337 Label, ID, Hose End, 3", "C" 3" dia. expanded, 2:1 ratio 1 0 0 0 8 9-2-9167-6 81337 Label, ID, Hose End, 3", "F" 3" dia. expanded, 2:1 ratio 0 1 0 0 8 9-2-9167-8 81337 Label, ID, Hose End, 3", "H" 3" dia. expanded, 2:1 ratio 0 0 1 0

8 9-2-9167-10 81337 Label, ID, Hose End, 3", "J" 3" dia. expanded, 2:1 ratio 0 0 0 1

9 RM-PIPE SEALANT 08854

Sealant Compound, Pipe Thread, Universal, NSF-approved for potable water, compatible w/ fuel, water, metal and plastic piping (Lo-Co Slic-Tite, Hercules Real-Tuff, or equivalent)

A/R A/R A/R A/R

10 QTP68C 53472 Cement Primer, Clear A/R A/R A/R A/R

11 RM-CEMENT 53472 Cement, Pipe, Solvent-Type, For ABS/PVC/CPVC, Clear, Universal or appropriate for material A/R A/R A/R A/R

12 D323-015 62531 Elbow, Pipe, 1/8 Bend Street 1-1/2", PVC-DWV 1 1 0 0

D W

G N

O

5 4

4 3

3 2

2 1

8 7

7 6

A A

B

C C

DD

REVISIONS

LTRZONE DESCRIPTION PROJ OFCR APVD DATE

APPROVAL DESIGN ACTIVITY

ACCORDANCE WITH ASME Y14.100

INTERPRET THIS DRAWING IN

APPLICATION

UNLESS OTHERWISE SPECIFIED:

3 PLACE DIM

2 PLACE DIM +-+-

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONS

ANGLES +-+- DRAWN BY

APPLICABLE SPEC

PROJ OFCR

APPROVED

CHECKED

DATE

UNIT WT.

KANSAS STREET, NATICK, MA, 01760-5056

U.S. ARMY, RESEARCH, DEVELOPMENT

AND ENGINEERING COMMAND, NATICK SOLDIER CENTER

DRAWING NO.CAGESIZE

NOTES:

1. CEMENT ALL PVC PIPE FITTINGS WITH SLIP JOINTS USING PRIMER AND CEMENT, ITEMS 10 AND 11.

SEAL ALL THREADED PIPE JOINTS WITH SEALANT COMPOUND, ITEM 9. DO NOT USE THREAD SEALING

TAPE ON PLASTIC THREADED PIPE JOINTS.

2 CLEAN SURFACES THOROUGHLY AND INSTALL LABEL, ITEM 8, AS SHOWN. POSITION APPROXIMATELY 2"

FROM HOSE ENDS AND HEAT TO SHRINK.

3. ASSURE FINISHED HOSE ASSEMBLY IS FREE OF CONTAMINANTS AND FOREIGN MATTER, AND TEST FOR

LEAKS.

9-2-9306

9-2-9363 9-2-0171

HOSE ASSEMBLY, DRAIN, LATRINE

M. HOPE

H.HENSLEY

W. REYNOLDS

G. McMICHAEL

11-02-14

9-2-930681337D

SCALE: NONE

USED ONNEXT ASSY

REVISION STATUS OF SHEETS

REVISIONS

- 14-10-01MHGMINITIAL RELEASE

SHEET 1 OF 2

SHEET

SH

T

2 1

DISTRIBUTION STATEMENT A

THIS DOCUMENT IS APPROVED FOR PUBLIC RELEASE: DISTRIBUTION IS UNLIMITED

INITIAL RELEASE GM MH-

DATEAPVDPROJ OFCRDESCRIPTIONZONE LTR

REVISIONS

14-10-01

L 1/2"

H

8 2

2 2X

7 9

AR

AR

AR

6 10

AR

AR

AR

AR

AR

-3 AND -4

D W

G N

O

D 81337

SIZE CAGE DRAWING NO.

UNIT WT. SHEET 2

5 4

4 3

3 2

2 1

8 7

7 6

A A

B

C C

DD

9-2-9306

9-2-9306

SCALE: NONE

SH

T 2

SHALL ONLY BE INCORPORATED AS

IS MAINTAINED BY A CAD SYSTEM. CHANGES

THIS DRAWING HAS BEEN GENERATED AND

DIRECTED BY THE DESIGN ACTIVITY.