Federal Agency: Army

Office: Army Contracting Command-Anniston Army Depot (ACC-ANAD)

AoI Title: Solid Waste Disposal

CSO AoI Number: AoI 005

AoI Release Date: 7 April 2026

Responses: See W911KF-25-S-C002-A003 for Procedure Details

1.0 Objective

The Government has a need for the routine removal and disposal of various types of solid waste materials located at the Anniston Army Depot (ANAD) utilizing contractor provided dumpsters and roll-off containers, with some materials requiring recycling.

Additionally, the Government has a need for movement of hazardous waste roll-off containers on an as needed basis.

2.0 Applicable Publications, Regulations, and Definitions

2.1 The following publications and regulations with the latest amendments form a part of this specification.

• Alabama Water Pollution Control Act, Sections 22-22-1 et seq., Code of Alabama (1975) as amended.

• Alabama Environmental Management Act, Sections 22-22a-1 et seq., Code of Alabama (1975) as amended.

• Alabama Air Pollution Control Act, Sections 22-28-1 et seq., code of Alabama (1975) as amended.

• Hazardous Waste Management and Minimization Act, Sections 22-30-1 et seq., Code of Alabama (1975) as amended.

• Solid Waste Disposal Act, Sections 22-27-1, et. seq., Code of Alabama (1975) as amended.

• Alabama Department of Environmental Management Administrative Code:

o ADEM Admin. Code R. 335-1-.01 et seq. /- General Administration o ADEM Admin. Code R. 335-3-.01 et seq.- Air Division Rules o ADEM Admin. Code R. 335-6-.01 et seq.- Water Division Rules o ADEM Admin. Code R. 335-14-.01 et seq.- Hazardous Waste Program.

o ADEM Admin. Code R. 335-13-01 et seq. - Solid Waste Program.

• Resource Conservation and Recovery Act as amended (1978, 1980, 1984), 42 USC 6901 et seq.

• Clean Water Act as amended, 33 USC 1251 et seq.

• Clean Air Act as amended, 42 USC 7401 et seq.

• Alabama Department of Public Health Standards Chapter 420-3-5.

• Code of Federal Regulations, Title 40, Protection of the Environment, with emphasis upon Parts 240 - 259, 270 - 272, 300, 302.

• OSHA General Industry Regulation 29 CFR 1910.

• ANAD Regulation 385 Series.

3.0 Background

3.1 During the course of normal operations at ANAD, several types of waste materials are generated that require removal and disposal. Types of waste and the approximate amount generated in FY25 are as follows.

3.1.1 Household Waste: This includes garbage (including putrescible animal and vegetable waste), small dead animals (deer, dogs, etc.), shelf-life expired pharmaceuticals, and trash derived from cafeterias and households as defined in ADEM Administrative Code R. 335-13-1-

03. FY2025 Approximate Quantity: 1,566,200 LBS.

3.1.2 Asbestos Waste: Includes regulated asbestos-containing material (RACM) as defined under NESHAP (40 CFR 61, Subpart M) and Alabama solid waste regulations.

Although Alabama permits asbestos disposal in Subtitle D landfills, asbestos is not classified as hazardous waste under RCRA. FY2025 Approximate Quantity: 25,000

LBS.

3.1.3 Industrial Waste: Includes but is not limited to: demilitarized military equipment, hardware, construction debris, demolition debris, rubbish, trash, sewage sludge, scrap wood from munitions pallets and packaging, Pentachlorophenol (PCP) treated wood, petroleum contaminated waste, Industrial Wastewater Treatment Plant (IWTP) filter cake, Sewage Treatment Plant (STP) dried sludge, special and industrial solid waste as defined in Alabama Department Environmental Management (ADEM) Administrative Code R. 335-13-1-.03. FY2025 Approximate Quantity: 6,259,600 LBS.

3.2 Currently, ANAD utilizes approximately 397 collection containers of various sizes to collect Subtitle D waste. Types and quantities of various containers currently in use are shown below.

Type Includes Required Container Type

Household Office and household type waste Dumpster (Approx 250)

Asbestos Asbestos containing waste Roll-off box (Approx 2)

Industrial General depot wood, oily waste, C&D waste, industrial waste, special waste Roll-off box (Approx 145)

Special Waste includes but is not limited to: steam cleaning sludge, dried sewage sludge, pentachlorophenol (PCP) treated wood, plasma cutter residue, shredded Kevlar, shredded camouflage netting, and blast media composite. It is defined by ADEM Administrative Code R. 335-13-1-.03.

3.3 The ANAD Hazardous Waste Storage Facility (HWSF) provides for the movement of hazardous waste roll-off containers from one depot location to another location. There are times that the HWSF cannot complete this mission, and the contractor will be called upon to complete this action.

Interested parties are highly encouraged to visit the Government Point of Entry (www.sam.gov) to review the ACC-ANAD CSO special posting in its entirety to obtain more information on the process for submission evaluation of the CSO AoI Responses.

ACC-ANAD is not obligated to extend a request for proposal or make an award as a result of this CSO AoI; all awards are subject to the availability of funds and successful negotiations. This CSO AoI is not an authorization to begin performance, and in no way obligates the Government for any costs incurred by the Offeror associated with developing a Response. Prior to commencement of any activities associated with performance under this CSO AoI, the Government will issue a written directive or contractual document signed by the Contracting Officer with appropriate consideration established. ACC-ANAD reserves the right to modify the requirements of this CSO AoI.

The authority to issue this CSO AoI is derived from ACC-ANAD Commercial Solutions Opening W911KF-25-S-C002, dated 19 May 2025. The CSO authority is Section 803 of the National Defense Authorization Act for FY2022, Public Law 117-807, and Class Deviation 2022-O0007.

4. AoI Constraints

Any selected company/companies will be required to be registered in the System for Award Management (sam.gov).

5. Submission:

A written solution must be sent via e-mail submission by 4:00 P.M (CDT); 11 May 2026 with subject line stating SOLUTION for Specific AoI 005 Solid Waste Disposal to POCs listed below.

Solutions received after the specified due date and time will be discarded and not be evaluated by the Government.

AoI Open Period – This AoI shall close at 4:00P.M (CDT): 11 May 2026.

Points of contact:

AoI questions can be sent to:

Contracting Officers: troy.m.gaddy2.civ@army.mil and larry.d.stephney.civ@army.mil

Contract Specialist sara.b.young.civ@army.mil

CSO AoI Contracting Officer: amber.e.burdett.civ@army.mil

CSO AoI POC: diana.m.pritchettponder.civ@army.mil