A.07.23 Phase 1 -24R0011-SRM MATOC 3.0 RFP-DIV 00-Final-22 MAY 2024.pdf

REQUEST FOR PROPOSAL

US Army Corps of Engineers Alaska District

SRM MATOC IDIQ

Indefinite Delivery Indefinite Quantity (IDIQ) Multiple Award Task Order Contract (MATOC) for Sustainment, Restoration and Modernization (SRM) and Other Small Construction Projects, Various Military

Installations, and other locations, Alaska and Wake Island

BOOK1OF2

DIVISION 00 –PROCUREMENT AND CONTRACTING REQUIRMENTS

W911KB24R0011

22 May 2024

SRM MATOC IDIQ

TABLE OF CONTENTS

SF 1442

SECTION 00 11 01 CLIN SCHEDULE

SECTION 00 21 00 INSTRUCTIONS CONDITIONS AND NOTICES TO OFFERORS

SECTION 00 22 10 PHASE 1 PROPOSAL SUBMISSION REQUIREMENTS

EVALUATION CRITIERIA

SECTION 00 22 20 PHASE 2 DESIGN BUILD SELECTION PROCEDURES AND

BASIS OF AWARD

SECTION 00 45 00 REPRESENTATIONS AND CERITIFICATIONS

SECTION 00 72 00 CONTRACT CLAUSES

SECTION 00 73 00 CONTRACT ADMINSTRATION

SECTION 00 73 00.00 29 SPECIAL CONTRACT REQUIREMENTS

SECTION 00 73 46 WAGE DETERIMINATIONS SCHEDULES

DIVISION 01 – SPECIFICATIONS

01 19 30.00 29 SPECIAL ITEMS

01 19 30.01 29 SPECIAL ITEMS FOR FORT WAINWRIGHT PROJECTS

01 19 30.02 29 SPECIAL ITEMS FOR EIELSON AFB PROJECTS

01 19 40.00 29 SPECIAL ITEMS (CIVIL WORKS)

01 20 00 PRICE AND PAYMENT PROCEDURES

01 32 01.00 10 PROJECT SCHEDULE

01 33 00 SUBMITTAL PROCEDURES

01 35 26 GOVERNMENT SAFETY REQUIREMENTS

01 36 00.00 29 RADIOACTIVE MATERIALS PROCEDURES

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.15 10 RESIDENT MANAGEMENT SYSTEM CONTRACTOR MODE

(RMS CM)

01 45 04.00 29 CONTRACTOR QUALITY CONTROL

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 50 00.03 29 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

FOR FORT WAINWRIGHT PROJECTS

01 50 00.04 29 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

FOR EIELSON AFB PROJECTS

01 57 19.01 29 TEMPORARY ENVIRONMENTAL CONTROLS FOR EIELSON

AFB PROJECTS

01 57 34.00 29 STORM WATER POLLUTION PREVENTION MEASURES

01 58 00 PROJECT IDENTIFICATION

01 74 19 CONSTRUCTION WASTE MANAGEMENT AND DISPOSAL

01 78 00 CLOSEOUT SUBMITTALS

01 78 23 OPERATIONS AND MAINTENANCE DATA

--End of Project Table of Contents --

TITLE: IIDIQ MATOC FOR SUSTAINMENT, RESTORATION AND MODERNIZATION (SRM), AND OTHER SMALL CONSTRUCTION PROJECTS, VARIOUS MILITARY INSTALLATIONS AND OTHER LOCATIONS, ALASKA AND WAKE ISLAND.

TOTAL SMALL BUSINESS SET ASIDE

NAICS: 236220 Commercial and Institutional Building Construction SIZE STANDARD: $45.0 Million

DESCRIPTION: The contract(s) are for a broad range of SRM and other small construction projects of various facilities and infrastructure on various military installations, as w ell as, at other locations in Alaska and Wake Island. The contracts w ill be IDIQ Multiple Aw ard Task Order Contract (MATOC) and w ill list a variety of individual construction tasks.

RAVEN S DONELSON

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

22-May-2024

(RFP)

(IFB)

X

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

X

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______1 calendar days and complete it w ithin ________ calendar days after receiving aw ard, notice to proceed. This performance period is X mandatory, negotiable. (See _________________________PER TASK ORDER

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

YES X NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the w ork required are due at the place specif ied in Item 8 by ___________ local time ______________25 Jun 2024 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time of fers are due.

B. An offer guarantee is, X is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______90 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

U.S. ARMY ENGINEER DISTRICT, AK

CEPOA-CT (W911KB)

2204 TALLEY AVENUE

JBER AK 99506-0898

W911KB

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

02:00 PM (hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

FAX:TEL: TEL: FAX:

W911KB24R0011 306

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

MATOC IDIQ

PRIME CONTRACTOR DIRECT COST BREAKDOWN

Table 1. 1st YEAR

Job Title a.

Direct Cost $

(hrly rate) b.

Labor Burden c.

Subtotal ($) d.

G&A (%) e.

Maximum

Total Project Manager

Superintendent

Quality Control Manager Safety Program Manager

Table 2. 2nd YEAR

Direct Cost $ (hrly rate) b.

Labor Burden c.

Subtotal ($) d.

G&A (%) e.

Maximum

Total Project Manager

Superintendent

Quality Control

Table 3. 3rd YEAR

Direct Cost $ (hrly rate) b.

Labor Burden c.

Subtotal ($) d.

G&A (%) e.

Maximum

Total Project Manager

Superintendent

Table 4. 4th YEAR

(hrly rate) b.

Labor Burden c.

Subtotal ($) d.

G&A (%) e.

Maximum

Total Project Manager

Superintendent

Table 5. 5th YEAR

(hrly rate) b.

Labor Burden c.

Subtotal ($) d.

G&A (%) e.

Maximum

Total Project Manager

Superintendent

Table 6. 6th YEAR

(hrly rate) b.

Labor Burden c.

Subtotal ($) d.

G&A (%) e.

Maximum

Total Project Manager

Superintendent

Table 7. 7th YEAR

Direct Cost $

(hrly rate) b.

Labor Burden c.

Subtotal ($) d.

G&A (%) e.

Maximum

Total Project Manager

Superintendent

Quality Control Manager

FORMULA:

c = (a x b) + a e = (d x c) + c

PRIME CONTRACTOR DIRECT COST BREAKDOWN

TABLES 1, 2, 3, 4, 5, 6, and 7

1. Labor burden includes payroll taxes and other applicable fringe benefits, such as holiday, vacation or sick leave, worker’s compensation, pension plans, etc. It must be clear what the total multiplier is for each job title.

2. If there are multiple direct labor hourly rates within a job title and/or job category, the offeror shall list all individual hourly rates used to calculate the average or blended hourly rate proposed for each job title as an attachment to the PRIME CONTRACTOR DIRECT COST BREAKDOWN tables. Calculate the average or blended rate proposed for each job title and show the averaging technique applied (straight or weighted averaging). The attachment to the PRIME CONTRACTOR DIRECT COST BREAKDOWN tables shall contain the calculations and explain the averaging technique used.

3. Do not include prime profit in the total multipliers. Prime profit will be negotiated for sole source task orders and task order modifications. The job titles shown in the tables will be used over the life of this contract. Each offeror must use the job titles in the tables in task order price proposals.

4. The offeror’s proposed G&A rates for the base period and option periods are the maximum rate allowable under the given period of the contract and are applicable to all direct costs not limited to job titles listed in the PRIME CONTRACTOR DIRECT COST BREAKDOWN tables. Lower rates may be negotiated for sole source task orders or task order modifications.

5. Overhead and/or General and Administrative (G&A) rates should be based on the offeror’s normal accounting practice. Many firms used the terms “Overhead” and “G&A expense” or “home office expense” interchangeably. If this is the case, offerors are to provide a rate for G&A or its equivalent.

Direct overhead is normally considered “job overhead”. Job overhead normally includes the job trailer, equipment, safety equipment, etc. and will be task order specific. Job overhead is not being evaluated for the base contract and should not be included in the G&A cost factor.

6. Show the percentage of each indirect cost rate in its % format. For example, use 25% rather than 0.25.

SECTION 00 21 00 W911KB24R0011

SRM MATOC

SECTION 00 21 00

INSTRUCTIONS, CONDITIONS AND NOTICES TO OFFERORS

1.0 GENERAL INFORMATION

1.1 GENERAL DESCRIPTION OF WORK

1.2 TYPE OF CONTRACT AND CONTRACT COST LIMITATION

1.3 GOVERNMENT SECURITY REQUIREMENTS

1.4 COPIES OF SOLICITATION DOCUMENTS AND AMENDMENTS

1.5 OFFEROR QUESTIONS AND COMMENTS

1.6 SMALL BUSINESS SIZE STANDARD/NAICS CODE

1.7 PROPOSAL EXPENSES AND PRE-CONTRACT COSTS

1.8 PRE-PROPOSAL CONFERENCE/SITE VISIT

1.9 ACCURACY IN PROPOSALS

1.10 PROPOSAL SUBMISSION

1.11 PROPOSAL FORMAT

1.12 JOINT VENTURE AND LLC PROPOSAL REQUIREMENTS

1.13 SOLICITATION PROVISIONS

1.0 GENERAL INFORMATION

1.1. GENERAL DESCRIPTION OF WORK

The contract(s) are for a broad range of Sustainment, Restoration, Modernization (SRM) and other small construction of various facilities and infrastructure on various military installations, as well as, at other locations in

Alaska and Wake Island. The contracts will be a Multiple Award Task Order Contract (MATOC) and will list a variety of individual construction tasks. During the contract period, the U.S. Army Corps of Engineers (USACE) will identify the scope of work required to complete each specific job, negotiate a price and performance time for each job, and issue task orders to the MATOC contractor(s) to complete the work. The task orders may be horizontal construction, vertical construction, sustainment, renovation and modernization of real property, or a combination, and may be fully designed or Design-Build. The contractor will be required to furnish all materials, equipment, and personnel necessary to manage and accomplish the job. The task orders will include a variety of construction, infrastructure site improvements (such as fencing, roads, parking, airfield paving, and drainage), facility repairs, incidental environmental work (including Hazardous Materials (HazMat), soil, and asbestos testing, removal, disposal and containment), facility upgrades, and, system maintenance (such as Heat Ventilation Air-Conditioning

(HVAC), plumbing, electrical, wastewater treatment systems, elevators, building envelope, fire protection, Anti-

Terrorism Force Protection (AT/FP), demolition, electronic security systems), and may be fully designed (Design-

Bid-Build) or Design-Build.

1.2. TYPE OF CONTRACT AND CONTRACT COST LIMITATION

Each MATOC award will have a seven (7) year ordering period. The total of all contracts awarded under this MATOC shall not exceed a shared $450,000,000.00 Million (M) capacity.

1.3. GOVERNMENT SECURITY REQUIREMENTS

The Offeror(s) must ensure that ALL mail sent to the Alaska District, USACE, either pre-award of contract or post-award, has a return mailing address on the outside of the envelope, package, box, etc. ANY MAIL addressed to the U.S. Army Corps of Engineers, including but not limited to bids, modifications to bids, proposals, revised proposals, bonds, correspondence, etc., will be REJECTED by the U.S. Army Corps of

Engineers mail room facility located at PO Box 6898, Joint Base Elmendorf-Richardson (JBER), AK 99506-

6898, if it does not contain a return mailing address. There will be no exceptions.

1.4. COPIES OF SOLICITATION DOCUMENTS AND AMENDMENTS

Copies of the solicitation and amendments are available by INTERNET ACCESS ONLY. All solicitation documents will be posted to the PIEE Solicitation Module website at:

https://piee.eb.mil/sol.xhtml/unauth/index.xhtml via Solicitation Number Search W911KB24R0011. It shall be the contractor’s responsibility to check the websites for any amendments. The offeror shall submit in the proposal all requested information specified in this solicitation. There will be no public opening of the proposals received as a result of this solicitation.

A list of interested vendors (potential offerors and subcontractors) is available on the Sam.gov website.

Registration is required at https://www.sam.gov via Solicitation number search W911KB24R0011.

1.5. OFFEROR'S QUESTIONS AND COMMENTS

Questions and/or comments relative to these documents should be submitted via the Bidder Inquiry System as indicated below. All questions and/or comments should be submitted no later than ten (10) calendar days prior to the proposal due date.

a. Bidder Inquiry

b. Technical inquiries and questions relating to proposal procedures or bonds are to be submitted via

Bidder Inquiry in ProjNet at http://www.projnet.org/projnet.

c. To submit and review bid inquiry items, bidders will need to be a current registered user or self-register into system. To self-register go to web page, click BID tab select Bidder Inquiry, select agency

USACE, enter Key for this solicitation listed below, and our e-mail address, click login. Fill in all required information and click create user. Verify that information on the next screen is correct and click on continue.

d. From this page you may view all bidder inquiries and add inquiry. A complete listing of all inquiries and responses will be issued by amendment after the inquiry period closes.

e. Bidders will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team.

f. The Solicitation Number is: W911KB24R0011

g. The Bidder Inquiry Key is: 37EQ8C-7JR5ME

h. The Bidder Inquiry System will be unavailable for new inquiries 10 calendar days prior to proposal submission in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.

i. Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

j. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.

k. Offerors will NOT be publicly opened. Information concerning the status of the evaluation and/or award will not be available after receipt of proposals.

1.6. SMALL BUSINESS SIZE STANDARD/NAICS CODE

NAICS CODE: 236220 SMALL BUSINESS SIZE STANDARDS: $45.0 Million

1.7. PROPOSAL EXPENSES AND PRE-CONTRACT COSTS

This Request for Proposal (RFP) does not commit the Government to pay, as a direct charge, any costs incurred in the preparation and submission of a proposal.

1.8. PRE-PROPOSAL CONFERENCE / SITE VISIT

See FAR Clause 52.236-27 (Site Visit – Construction) of this Section. A site visit will not be scheduled for

Phase 1 of this solicitation; and a site visit may be scheduled for Phase 2 via an Amendment.

1.9. ACCURACY IN PROPOSALS

Proposals must set forth full, accurate, and complete information as required by this RFP, (including false statements is prescribed in 18 U.S.C. 1001.

1.10. PROPOSAL SUBMISSION

Offerors must submit proposals electronically via the PIEE Solicitation Module website at:

https://pie.eb.mil/sol/xhtml/unauth/index.xhtml. Search vial Solicitation Number Search W911KB24R0011.

Offerors must submit proposals to be received no later than the date and time stated on the Standard Form (SF)

1442 or subsequent solicitation amendment. Questions concerning proposal receipt can be directed to the contract specialist and the contracting officer listed in the solicitation. Follow the proposal format outlined in paragraph

1.11.

NOTE: Electronic proposal submissions will only be accepted via the PIEE Solicitation Module website at:

https://piee.eb.mil/sol/xhtml/unauth/index.xhtml. Search vial Solicitation number search W911KB24R0011. In order to submit a proposal, vendors must register in the PIEE system and must have a proposal manager role established. Additional information regarding proposal manager, proposal manager functions and posting offers can be found at https://pieetraining.eb.mil/wbt/xhtml/wbt/xhtml/wbt/sol.solicitation/proposals.xhtml.

1.11. PROPOSAL FORMAT

(a) Written Materials: 8 ½” x 11” format, using 10 point or larger font size. Each volume will contain a

Title Sheet on the cover for ready identification of the proposal and a full table of the contents, separated by

Tabs, as prescribed herein. Within each Tab, it is recommended that the proposal information be presented in the same relative format as the submission requirements are listed.

(i) The prime, consortium, or joint venture’s name, address, a signature of the official that can bind the firm and a telephone number shall appear in the lower left corner of the title page of any document/volume to be evaluated.

(ii) Volume number, section and date submitted shall appear in the bottom right corner of each page (along with the revision number for the amended page, if necessary). Page numbering shall re-start with each

Tab. One (1) page is defined as the front of one (1) sheet; the front and back of one (1) sheet will be counted as two (2) pages. Government will not evaluate any material exceeding the page limitations stated in the RFP.

(b) Drawing sheets: Use 11” x 17” for half size drawings.

(c) Electronic Format: Provide proposal in searchable, read-only format (preferably PDF format). All price breakdown information to aide in the price evaluation shall be submitted (Phase 2) in Excel format.

(d) Number of copies:

VOLUME 1 (Phase 1): Submit one (1) electronic copy via PIEE Solicitation Module as described in paragraph

1.10. For Phase 2, submit one electronic copy of proposal via PIEE Solicitation Module to be received no later than the date and time stated on the Standard Form (SF) 1442 or subsequent solicitation amendment. Phase 2 Proposal may be broken down into separate files as required due to size and format. The successful contractor shall provide one (1) searchable, read only electronic (*.pdf) copy of the entire Volumes 1 and 2 and one (1) copy of all CADD files using Autodesk Civil 3D 2021

1.12. JOINT VENTURE AND LIMITED LIABILITY COMPANY PROPOSAL REQUIREMENTS

a. When proposing as a joint venture, all members of the joint venture shall sign the SF1442 unless a written agreement by the joint venture is furnished with the proposal designating one firm with the authority to bind the other member(s) of the joint venture. In addition, a copy of the joint venture agreement shall be submitted with the proposal. Failure to comply with the foregoing requirements may eliminate the proposal from further consideration. If this is an 8(a) or HUBZone joint venture, the offeror shall ensure that it complies with the applicable requirements of 13 CFR Part 124 and 13 CFR Part 126, respectively.

b. When proposing as a Limited Liability Company (LLC), a member authorized to bind the LLC shall sign the SF 1442. A copy of the LLC Certificate of Organization, Articles of Organization and the Operating

Agreement shall be submitted with the Phase 1 proposal.

c. On SF 25 and 25A, Bonds, where it requests “State of Incorporation,” the LLC should instead put the “State of Organization.” In the Principal’s signature block, the signatory shall indicate whether he or she is signing as a member manager, or both. Instead of a “Corporate Seal” attach the Certificate of Organization, as appropriate, which should indicate the signatory’s authority to bind the LLC.

52.204-16 Commercial and Government Entity Code Reporting

52.207-6 Solicitation of Offers from Small Business Concerns and Small Business Teaming Arrangements for Joint Ventures (Multiple-Award Contracts)

52.211-14 Notice of Priority Rating For National Defense, Emergency Preparedness, and Energy Program Use 52.215-1 Alt I Instructions to Offerors—Competitive Acquisition 52.216-1 Type of Contract 52.216-27 Single or Multiple Awards 52.222-23 Notice of Requirement for Affirmative Action to Ensure Equal Employment Opportunity for

Construction 52.222-38 Compliance with Veterans’ Employment Reporting Requirements 52.233-2 Service of Protest

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING

(a) Definition. As used in this provision –

Commercial and Government Entity (CAGE) code means–

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity by unique location; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file.

This type of code is known as a NATO CAGE (NCAGE) code.

(b) The Offeror shall provide its CAGE code with its offer with its name and location address or otherwise include it prominently in its proposal. The CAGE code must be for that name and location address. Insert the word "CAGE" before the number. The CAGE code is required prior to award.

(c) CAGE codes may be obtained via–

(1) Registration in the System for Award Management (SAM) at www.sam.gov. If the Offeror is located in the United States or its outlying areas and does not already have a CAGE code assigned, the DLA Commercial and Government Entity (CAGE) Branch will assign a CAGE code as a part of the SAM registration process. SAM registrants located outside the United States and its outlying areas shall obtain a NCAGE code prior to registration in SAM (see paragraph (c)(3) of this provision).

(2) The DLA Contractor and Government Entity (CAGE) Branch. If registration in SAM is not required for the subject procurement, and the Offeror does not otherwise register in SAM, an Offeror located in the United States or its outlying areas may request that a CAGE code be assigned by submitting a request at https://cage.dla.mil.

(3) The appropriate country codification bureau. Entities located outside the United States and its outlying areas may obtain an NCAGE code by contacting the Codification Bureau in the foreign entity's country if that country is a member of NATO or a sponsored nation. NCAGE codes may be obtained from the NSPA at https://eportal.nspa.nato.int/AC135Public/scage/CageList.aspx if the foreign entity’s country is not a member of NATO or a sponsored nation. Points of contact for codification bureaus, as well as additional information on obtaining NCAGE codes, are available at http://www.nato.int/structur/AC/135/main/links/contacts.htm.

1.13. SOLICITATION PROVISIONS

(d) Additional guidance for establishing and maintaining CAGE codes is available at https://cage.dla.mil.

(e) When a CAGE code is required for the immediate owner and/or the highest-level owner by Federal Acquisition Regulation (FAR) 52.204-17 or 52.212-3(p), the Offeror shall obtain the respective CAGE code from that entity to supply the CAGE code to the Government.

(f) Do not delay submission of the offer pending receipt of a CAGE code.

(g) If the solicitation includes FAR clause 52.204-2, Security Requirements, a subcontractor requiring access to classified information under a contract shall be identified with a CAGE code on the DD Form 254. The Contractor shall require a subcontractor requiring access to classified information to provide its CAGE code with its name and location address or otherwise include it prominently in the proposal. Each location of subcontractor performance listed on the DD Form 254 is required to reflect a corresponding unique CAGE code for each listed location unless the work is being performed at a Government facility, in which case the agency location code shall be used. The CAGE code must be for that name and location address. Insert the word "CAGE" before the number. The CAGE code is required prior to award.

(End of provision)

52.207-6 SOLICITATION OF OFFERS FROM SMALL BUSINESS CONCERNS AND SMALL BUSINESS

TEAMING ARRANGEMENTS OR JOINT VENTURES (MULTIPLE-AWARD CONTRACTS) (OCT 2016)

(a) Definition. ``Small Business Teaming Arrangement,'' as used in this provision--

(1) Means an arrangement where--

(i) Two or more small business concerns have formed a joint venture; or

(ii) A small business offeror agrees with one or more other small business concerns to have them act as its subcontractors under a specified Government contract. A Small Business Teaming Arrangement between the offeror and its small business subcontractor(s) exists through a written agreement between the parties that--

(A) Is specifically referred to as a ``Small Business Teaming Arrangement''; and

(B) Sets forth the different responsibilities, roles, and percentages (or other allocations) of work as it relates to the acquisition;

(2)(i) (i) For civilian agencies, may include two business concerns in a mentor-protege relationship when both the mentor and the protege are small or the protege is small and the concerns have received an exception to affiliation pursuant to 13 CFR 121.103(h)(3)(ii) or (iii).

(ii) For DoD, may include two business concerns in a mentor-protege relationship in the Department of Defense Pilot Mentor-Protege Program (see section 831 of the National Defense Authorization Act for Fiscal Year 1991 (Pub. L. 101-510; 10 U.S.C. 2302 note)) when both the mentor and the protege are small. There is no exception to joint venture size affiliation for offers received from teaming arrangements under the Department of Defense Pilot Mentor-Protege Program; and

(3) See 13 CFR 121.103(b)(9) regarding the exception to affiliation for offers received from Small Business Teaming Arrangements in the case of a solicitation of offers for a bundled contract with a reserve.

(b) The Government is soliciting and will consider offers from any responsible source, including responsible small business concerns and offers from Small Business Teaming Arrangements or joint ventures of small business concerns.

(End of provision)

52.211-14 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008)

Any contract awarded as a result of this solicitation will be N/A DX rated order; C2 DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation. [Contracting Officer check appropriate box.]

(End of provision)

52.215-1 INSTRUCTIONS TO OFFERORS--COMPETITIVE ACQUISITION (JAN 2017)—ALTERNATE I

(OCT 1997)

(a) Definitions. As used in this provision--

“Discussions” are negotiations that occur after establishment of the competitive range that may, at the Contracting Officer's discretion, result in the offeror being allowed to revise its proposal.

In writing, writing, or written” means any worded or numbered expression which can be read, reproduced, and later communicated, and includes electronically transmitted and stored information.

“Proposal modification” is a change made to a proposal before the solicitation's closing date and time, or made in response to an amendment, or made to correct a mistake at any time before award.

“Proposal revision” is a change to a proposal made after the solicitation closing date, at the request of or as allowed by a Contracting Officer as the result of negotiations.

“Time”, if stated as a number of days, is calculated using calendar days, unless otherwise specified, and will include Saturdays, Sundays, and legal holidays. However, if the last day falls on a Saturday, Sunday, or legal holiday, then the period shall include the next working day.

(b) Amendments to solicitations. If this solicitation is amended, all terms and conditions that are not amended remain unchanged. Offerors shall acknowledge receipt of any amendment to this solicitation by the date and time specified in the amendment(s).

(c) Submission, modification, revision, and withdrawal of proposals. (1) Unless other methods (e.g., electronic commerce or facsimile) are permitted in the solicitation, proposals and modifications to proposals shall be submitted in paper media in sealed envelopes or packages (i) addressed to the office specified in the solicitation, and (ii) showing the time and date specified for receipt, the solicitation number, and the name and address of the offeror.

Offerors using commercial carriers should ensure that the proposal is marked on the outermost wrapper with the information in paragraphs (c)(1)(i) and (c)(1)(ii) of this provision.

(2) The first page of the proposal must show--

(i) The solicitation number;

(ii) The name, address, and telephone and facsimile numbers of the offeror (and electronic address if available);

(iii) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and agreement to furnish any or all items upon which prices are offered at the price set opposite each item;

(iv) Names, titles, and telephone and facsimile numbers (and electronic addresses if available) of persons authorized to negotiate on the offeror's behalf with the Government in connection with this solicitation; and

(v) Name, title, and signature of person authorized to sign the proposal. Proposals signed by an agent shall be accompanied by evidence of that agent's authority, unless that evidence has been previously furnished to the issuing office.

(3) Submission, modification, or revisions of proposals. (i) Offerors are responsible for submitting proposals, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that proposal or revision is due.

(ii)(A) Any proposal, modification, or revision received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(1) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of proposals; or

(2) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(3) It is the only proposal received.

(B) However, a late modification of an otherwise successful proposal that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(iii) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the proposal wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(iv) If an emergency or unanticipated event interrupts normal Government processes so that proposals cannot be received at the office designated for receipt of proposals by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation, the time specified for receipt of proposals will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(v) Proposals may be withdrawn by written notice received at any time before award. Oral proposals in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile proposals, proposals may be withdrawn via facsimile received at any time before award, subject to the conditions specified in the provision at 52.215-5, Facsimile Proposals. Proposals may be withdrawn in person by an offeror or an authorized representative, if the identity of the person requesting withdrawal is established and the person signs a receipt for the proposal before award.

(4) Unless otherwise specified in the solicitation, the offeror may propose to provide any item or combination of items.

(5) Offerors shall submit proposals in response to this solicitation in English, unless otherwise permitted by the solicitation, and in U.S. dollars, unless the provision at FAR 52.225-17, Evaluation of Foreign Currency Offers, is included in the solicitation.

(6) Offerors may submit modifications to their proposals at any time before the solicitation closing date and time, and may submit modifications in response to an amendment, or to correct a mistake at any time before award.

(7) Offerors may submit revised proposals only if requested or allowed by the Contracting Officer.

(8) Proposals may be withdrawn at any time before award. Withdrawals are effective upon receipt of notice by the Contracting Officer.

(d) Offer expiration date. Proposals in response to this solicitation will be valid for the number of days specified on the solicitation cover sheet (unless a different period is proposed by the offeror).

(e) Restriction on disclosure and use of data. Offerors that include in their proposals data that they do not want disclosed to the public for any purpose, or used by the Government except for evaluation purposes, shall--

(1) Mark the title page with the following legend: This proposal includes data that shall not be disclosed outside the Government and shall not be duplicated, used, or disclosed--in whole or in part--for any purpose other than to evaluate this proposal. If, however, a contract is awarded to this offeror as a result of--or in connection with-- the submission of this data, the Government shall have the right to duplicate, use, or disclose the data to the extent provided in the resulting contract. This restriction does not limit the Government's right to use information contained in this data if it is obtained from another source without restriction. The data subject to this restriction are contained in sheets [insert numbers or other identification of sheets]; and

(2) Mark each sheet of data it wishes to restrict with the following legend: Use or disclosure of data contained on this sheet is subject to the restriction on the title page of this proposal.

(f) Contract award.

(1) The Government intends to award a contract or contracts resulting from this solicitation to the responsible offeror(s) whose proposal(s) represents the best value after evaluation in accordance with the factors and subfactors in the solicitation.

(2) The Government may reject any or all proposals if such action is in the Government's interest.

(3) The Government may waive informalities and minor irregularities in proposals received.

(4) The Government intends to evaluate proposals and award a contract after conducting discussions with offerors whose proposals have been determined to be within the competitive range. If the Contracting Officer determines that the number of proposals that would otherwise be in the competitive range exceeds the number at which an efficient competition can be conducted, the Contracting Officer may limit the number of proposals in the competitive range to the greatest number that will permit an efficient competition among the most highly rated proposals. Therefore, the offeror's initial proposal should contain the offeror's best terms from a price and technical standpoint.

(5) The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit cost or prices offered, unless the offeror specifies otherwise in the proposal.

(6) The Government reserves the right to make multiple awards if, after considering the additional administrative costs, it is in the Government's best interest to do so.

(7) Exchanges with offerors after receipt of a proposal do not constitute a rejection or counteroffer by the Government.

(8) The Government may determine that a proposal is unacceptable if the prices proposed are materially unbalanced between line items or subline items. Unbalanced pricing exists when, despite an acceptable total evaluated price, the price of one or more line items is significantly overstated or understated as indicated by the application of cost or price analysis techniques. A proposal may be rejected if the Contracting Officer determines that the lack of balance poses an unacceptable risk to the Government.

(9) If a cost realism analysis is performed, cost realism may be considered by the source selection authority in evaluating performance or schedule risk.

(10) A written award or acceptance of proposal mailed or otherwise furnished to the successful offeror within the time specified in the proposal shall result in a binding contract without further action by either party.

(11) If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(i) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer.

(ii) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(iii) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(iv) A summary of the rationale for award.

(v) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror.

(vi) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

(End of provision)

52.216-1 TYPE OF CONTRACT (APR 1984)

The Government contemplates awarding a target of five (5) Small Business MATOCs Indefinite-Delivery Indefinite-Quantity (IDIQ) Multiple Award Task Order Contract (MATOC) contract resulting from this solicitation.

(End of provision)

52.216-27 SINGLE OR MULTIPLE AWARDS. (OCT 1995)

The Government may elect to award a single delivery order contract or task order contract or to award multiple delivery order contracts or task order contracts for the same or similar supplies or services to two or more sources under this solicitation.

(End of provision)

52.222-23 NOTICE OF REQUIREMENT FOR AFFIRMATIVE ACTION TO ENSURE EQUAL

EMPLOYMENT OPPORTUNITY FOR CONSTRUCTION (FEB 1999)

(a) The offeror's attention is called to the Equal Opportunity clause and the Affirmative Action Compliance Requirements for Construction clause of this solicitation.

(b) The goals for minority and female participation, expressed in percentage terms for the Contractor's aggregate workforce in each trade on all construction work in the covered area, are as follows:

Goals for minority participation for each trade

Goals for female participation for each trade

8.7% Alaska 15.1% (Locations Outside City of Anchorage, Alaska)

6.9% Alaska6.9% Alaska8.7% Alaska 15.1% (Locations Outside City of Anchorage, Alaska)

These goals are applicable to all the Contractor's construction work performed in the covered area. If the Contractor performs construction work in a geographical area located outside of the covered area, the Contractor shall apply the goals established for the geographical area where the work is actually performed. Goals are published periodically in the Federal Register in notice form, and these notices may be obtained from any Office of Federal Contract Compliance Programs office.

(c) The Contractor's compliance with Executive Order 11246, as amended, and the regulations in 41 CFR 60-4 shall be based on (1) its implementation of the Equal Opportunity clause, (2) specific affirmative action obligations required by the clause entitled "Affirmative Action Compliance Requirements for Construction,'' and (3) its efforts to meet the goals. The hours of minority and female employment and training must be substantially uniform throughout the length of the contract, and in each trade. The Contractor shall make a good faith effort to employ minorities and women evenly on each of its projects. The transfer of minority or female employees or trainees from Contractor to Contractor, or from project to project, for the sole purpose of meeting the Contractor's goals shall be a violation of the contract, Executive Order 11246, as amended, and the regulations in 41 CFR 60-4. Compliance with the goals will be measured against the total work hours performed.

(d) The Contractor shall provide written notification to the Deputy Assistant Secretary for Federal Contract Compliance, U.S. Department of Labor, within 10 working days following award of any construction subcontract in excess of $10,000 at any tier for construction work under the contract resulting from this solicitation. The notification shall list the --

(1) Name, address, and telephone number of the subcontractor;

(2) Employer's identification number of the subcontractor;

(3) Estimated dollar amount of the subcontract;

(4) Estimated starting and completion dates of the subcontract; and

(5) Geographical area in which the subcontract is to be performed.

(e) As used in this Notice, and in any contract resulting from this solicitation, the "covered area" is of Alaska and Wake Island

(End of provision)

52.222-38 COMPLIANCE WITH VETERANS' EMPLOYMENT REPORTING REQUIREMENTS (FEB 2016)

By submission of its offer, the offeror represents that, if it is subject to the reporting requirements of 38 U.S.C.

4212(d) (i.e., if it has any contract containing Federal Acquisition Regulation clause 52.222-37, Employment Reports on Veterans), it has filed the most recent VETS-4212 Report required by that clause.

52.233-2 SERVICE OF PROTEST (SEP 2006)

(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from

U.S. ARMY ENGINEER DISTRICT, ALASKA

ATTN: CEPOA-CT

P.O. BOX 6898

JBER, ALASKA 99506-0898

(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.

- End of Section 00 21 00 -

SECTION 00 22 10 W911KB24R0011

SRM MATOC

PHASE 1 PROPOSAL SUBMISSION REQUIREMENTS

EVALUATION CRITERIA

1.0 OVERVIEW

2.0 GENERAL INSTRUCTIONS

3.0 PHASE 1 - PROPOSAL INFORMATION AND RELATED EVALUATION

FACTORS AND ELEMENTS

4.0 TAB A - STANDARD FORM 1442 AND PROPOSAL DATA SHEET

5.0 TAB C – FACTOR 1 - PAST PERFORMANCE

6.0 TAB D – FACTOR 2 - ORGANIZATION AND MANAGEMENT

7.0 PHASE 1 EVALUATION PROCEDURES

8.0 DEFINITIONS

ATTACHMENT 1- PROPOSAL DATA SHEET

ATTACHMENT 2 – OFFEROR CONSTRUCTION, DESIGN FIRM OR IN-HOUSE DESIGN

CAPABILITY EXPERIENCE FORM

ATTACHMENT 3 – NAVFAC/USACE PAST PERFORMANCE QUESTIONNAIRE (FORM PPQ-0)

ATTACHMENT 4 – LETTER OF COMMITMENT FOR DESIGN FIRM (USE COMPANY

LETTERHEAD)

1.0 OVERVIEW

1.1. This is Phase 1 of a 2 Phase Indefinite Delivery/Indefinite Quantity (IDIQ) Multiple Award Task Order Contract (MATOC), a target of five (5) contracts will be awarded. Awardees will be eligible to propose on facility sustainment, restoration and modernization (SRM) construction of various facilities and infrastructure on various military installations, various locations in Alaska and Wake Island. The work will primarily on military installations in Alaska, to include but not limited to Fort Wainwright (FTW), Eielson Air Force Base (EIE), Joint Base Elmendorf-Richardson (JBE or JBR), Fort Greely (FTG), Clear Space Force Station (CLR), Eareckson Air Station (EAR), National Oceanic and Atmospheric Administration (NOAA) Gilmore Creek Site, Kodiak Island, and on Wake Island as needed.

Task orders may include DBB or DB Construction (vertical and horizontal) and DBB or DB Construction related to Facility SRM of real property, new construction, repairs, incidental demolition (including Hazardous Material (HazMat) testing, removal and disposal), facility and system maintenance and upgrade, infrastructure and site improvements. Construction efforts may include, but are not limited to, work related to facilities, industrial building, power plants, utilities (water, sewer, communications, security systems, electric, fire protection, steam and hot water systems), incidental environmental work to include, but not limited to, incidental soil, and asbestos containment/disposal, and/or site work fencing, roads, parking, airfield paving, and drainage.

1.1.1 M u l t i p l e awards will be made from this solicitation. This requirement is being competed as a 100% Small Business Set-Aside under the North American Industry Classification System (NAICS) Code 236220, Commercial and Institutional Building and Construction. The resultant contracts awarded from this solicitation will constitute Indefinite Delivery, Indefinite Quantity (IDIQ) type contracts as defined in FAR 16.504. Task orders will be awarded against the basic IDIQ contracts using the fair opportunity procedures discussed in FAR 16.5 in addition to the competitive source selection procedures identified in Section 803 of Public Law 107-107 implemented in DFARS 216.505-70 and Public Law 110-181, Section 843. In accordance with FAR 16.505 and DFARS 216.505 all awardees in a MATOC pool will be afforded fair opportunity to be considered for award of each order exceeding $3,000 unless an exception described in FAR 16.505(b)(2) applies. Task orders will be firm-fixed price (FFP). This solicitation is for a seven (7) year base period.

1.1.2 The Government intends to award a target of five (5) IDIQ MATOC awards for this acquisition.

The capacity for Small Business firms MATOC is $450 Million and will be shared among all awardees in the MATOC pool. The ordering period shall commence upon the date of contract award and continue for a base period of seven (7) years. Per FAR 52.216-19, Order Limitations, a minimum order amount of $3,000 and a $12,000,000.00 maximum order amount per single order has been established for these Small Business firms MATOCs.

1.2 In Phase 1 of the 2 phase Design-Build selection procedure, interested firms or joint venture entities (referred to as “offerors” submit certain specified performance capability proposals, demonstrating their capability to successfully execute the design and construction (vertical and horizontal), renovate and/or repairs of small projects resulting from this solicitation. The Government will evaluate performance capability proposals in accordance with the criteria described herein and intends to select up to seven (7) of the Phase 1 offerors to compete for a target of five (5) IDIQ MATOC contracts and the initial task order described in Section 00 22 20.

1.2.1 In Phase 2, the short-listed offerors will submit proposals in accordance with Section 00 22 20.

1.2.2The most highly qualified offerors selected to participate in Phase 2will be announced by special notice or synopsis to the Government Point of Entry (GPE), (https://www.SAM.gov)

2.0 GENERAL INSTRUCTIONS

2.1 Firms formally organized as design-build entities, design firms and construction contractors that have associated specifically for this IDIQ, consortia of firms or any other interested parties may submit proposals.