Refer Question 26 Scranton Products Hiny Hiders.pdf

Partition

QUICK GUIDE

WHY CHOOSE HDPE?

MATERIAL OPTIONS FOR COMMERCIAL RESTROOM PARTITIONS

PLASTIC LAMINATE

Particleboard core

IMPACT & DENT RESISTANT

PHENOLIC

(BLACK CORE)

Resin-impregnated kraft paper core with laminated surface

STAINLESS STEEL

Honeycomb core made of cardboard inside a 304 Stainless steel exterior

BAKED ENAMEL

(METAL)

Honeycomb core made of cardboard inside a painted metal exterior

SP SOLID HDPE

Solid plastic with a homogeneous color throughout

Testing conducted by SiTU Biosciences LLC. by the ISO 22196 methods.

SCRATCH RESISTANT

Since Scranton Products® HDPE is formulated with a solid color throughout, scratches are diffi cult to see and can be easily repaired.

NO RUST

Scranton Products® HDPE bathroom partitions will never rust or corrode.

EASY GRAFFITI REMOVAL

Graffi ti can be easily wiped clean with a common non-abrasive cleaner.

CLEANER, HEALTHIER BATHROOMS

Moisture contact leads to rust formation and absorption into corrugated or wood core materials, all becoming a breeding ground for germs.

NO PAINTING

Scranton Products® bathroom partitions are solid color throughout and will not chip so they never require painting.

NO MOLD GROWTH

Impermeable to moisture, HDPE’s non-porous surface does not support the growth of mold and mildew.

NATURALLY GERM RESISTANT

After 24 hours, 98.4% of MRSA bacteria died off the surface of HDPE plastic without the use of any cleaning solutions.

HDPE PHENOLIC STAINLESS STEEL BAKED ENAMEL PLASTIC LAMINATE

RECYCLABLE (IN CURRENT STATE) Yes No No No No

POSTCONSUMER CONTENT 0%-100% 0% 25%-76% 0%-54% 2%-17%

PRECONSUMER CONTENT 25%-100% 0%-27% 15%-46% 14%-80% 0%-95%

LOW EMITTING MATERIALS Yes Yes 15%-46% Yes Yes

NO UREA FORMALDEHYDE RESINS Yes No Yes Yes Yes

GREENGUARD GOLD CERTIFIED Yes Yes Yes Yes Yes

MAINTENANCE Low Low Moderate High High

PRICE $$$ $$$ $$$$ $ $

Scranton Products

801 E. Corey Street

Scranton, PA 18505

800.445.5148

Fax: 800.551.6993 info@scrantonproducts.com www.scrantonproducts.com

WE DON’T JUST TALK TOUGH.

WE BACK IT UP.

Proudly made in the USA, Scranton Products’ brands provide industry-leading protection. Because Scranton Products is so confident that our solid plastic partitions will stand the test of time, they’re backed with a full 25-year limited warranty covering breakage, corrosion and delamination under normal conditions.

Call 800.445.5148 for the Scranton Products sales representative in your area, or visit scrantonproducts.com.

BATHROOM PARTITIONS

LOCKERS

LOCKER ROOM BENCHES

SHOWER CUBICLES

DRESSING COMPARTMENTS

VANITIES

WHY HINY HIDERS?

DESIGNED TO

BE WORRY-FREE

With tough construction and rugged good looks, Hiny Hiders partitions offer durability that will save customers time, hassle, and maintenance costs. Hiny Hiders partitions offer superior value that simply can’t be beat by the competition.

Benefits of Hiny Hiders Bathroom Partitions:

• Durable and dent, mold, scratch and graffiti resistant

• Easy to clean and low maintenance

• Never rusts, corrodes, or delaminates

• Never needs painting

HDPE materials are also resistant to scratches, dents, and writing/graffiti. They don’t need to be repainted, which results in less volatile organic compounds in the air. These partitions help keep your air quality favorable while providing a comfortable environment for occupants.

Facility managers choose Hiny Hider Commercial Bathroom Partitions for the following reasons:

• Durable HDPE material

• Large selection of colors and textures

• Customizable partitions and engravable

• Fire rating options

• Three ADA compliant configurations

• 25-year limited warranty

HARDWARE

COLLECTIONSTANDARD

To complement the appearance of your interior, Scranton Products offers an array of great-looking hardware options. Whichever style you choose, rest assured it will match the toughness of our partitions and deliver years of worry-free service.

54" Plastic, Aluminum*

54” or 68”, or

Stainless Steel*

6" Aluminum

8" Wrap Around 54", 71”, 65”

Continuous

Aluminum*

54", 65”, Continuous

Stainless Steel Helix*

54", Continuous Stainless

Steel Spring Loaded*

Stealth Integral

Hinge

Regal Hinge Vault Hinge

Aluminum or

Stainless Steel*†

Occupancy

Indicator

Single Ear

Stainless Steel

54", 71” Continuous

Aluminum*

Continuous Bracket Strikes

Aluminum

Head Rail

Aluminum or

Stainless Steel

Double Ear

Single Ear

Stirrup Brackets

Hinges

Latches Shoes

Double Ear

Plastic Pilaster††

* Optional hardware † Stainless steel option varies from aluminum hardware shown. †† Limited colors available.

3” Stainless Steel emergency access

THE POSSIBILITIES

ARE LIMITLESS.

Signature Door Panel Engraving Options Optional Side Panel Engraving

†† Limited colors available.

Ceiling HungFloor Mounted Overhead Braced

Floor to Ceiling

66" High* 72" Extra High*55" Standard

8" 7"

9" 4" 14"

14"

FIRE RATING

Whether your fire rating needs are NFPA 286, Class

A, or Class B, we have the material to match.

*Modular panel may be required if stall depth is greater than 55".

Height Options Configuration Options

COLOR COLLECTION

WARM TONE

COLOR COLLECTION

TRADITIONAL

COLOR COLLECTION

METALLIC

SHALE

CONCRETE

MAHOGANY

BRONZE

NICKEL

STAINLESS

NICKELSTAINLESS

BRONZESTAINLESS

GLACIER GREY

PAISLEY

SANDCASTLE

SANDSTONE

COLOR COLLECTION

BOLD

WHITE

BURGUNDY

CHARCOAL GREY

FOSSIL

GREY

BLUEBERRY

FRENCH BLUE

HUNTER GREEN

LINEN

MOCHA DESERT BEIGE

BLACK

BLACK

CUSTOM COLORS AVAILABLE UPON REQUEST.

Color matching is limited by printing process. Actual samples are available and recommended prior to color selections.

*Special orders require extended lead times. Minimum order requirements may apply.

TEXTURE KEY:

ORANGE PEEL EX

HAMMERED ROTARY BRUSHED

Traditional

Traditional

Modern

Modern

Modern

Modern

Two Panel

PRIVACY IS BEING UPSCALED

Now there are even more design options for your high-end projects. Achieve the beautiful, warm look of authentic wood with a high performance alternative.

The Artisan Collection is your premium HDPE upgrade to traditional woodgrain materials, drastically reducing the hassles of cleaning and constant maintenance experienced with wood, metal, phenolic and laminate products.

Set free your imagination and explore new design possibilities with a long-lasting material that looks and performs beautifully for years to come.

WWW.SCRANTONPRODUCTS.COM

1-800-445-5148

Introducing the

ARTISAN

COLLECTION

RESTROOM PARTITIONS | LOCKERS | BENCHES | SHOWER STALLS | DRESSING COMPARTMENTS | BATHROOM VANITIES | URINAL & PRIVACY SCREENS

BIRCH TEAK

Available in Birch & Teak with new colors coming this summer!

Embossed woodgrain texture with natural color options & unique streak variation

Scratch resistant with matching core color for high-performance aesthetic

Superior durability with 25-year warranty

Contains post-industrial recycled content & is 100% recyclable

Engravable doors & panels for that custom look

Scranton, PA 18505

800.445.5148

Info@ScrantonProducts.com www.ScrantonProducts.com

WE DON’T JUST TALK TOUGH.

WE BACK IT UP.

Just as there’s no limit to the toughness of Scranton Products bathroom partitions, now there’s no limit to color choices either.

Look inside and see which of our many style options best fits your project. Scranton Products offers a wide array of colors and textures.

your area, or visit ScrantonProducts.com.

BATHROOM PARTITIONS

LOCKERS

LOCKER ROOM BENCHES

SHOWER CUBICLES

DRESSING COMPARTMENTS

VANITIES

PARTITION

COLORS & TEXTURES

MAHOGANY CONCRETE

LINEN SANDCASTLEDESERT BEIGE

MOCHA

SANDSTONE

COLOR COLLECTION

WARM TONE

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

Aria Partitions Color/Texture: Mahogany, Orange Peel

COLOR & TEXTURE

OPTIONS

STAINLESS NICKEL

NICKELBRONZESTAINLESS

STAINLESS

BRONZE

COLOR COLLECTION

METALLIC

CUSTOM COLORS AVAILABLE UPON REQUEST

Color matching is limited by printing process. Actual samples are available and recommended prior to color selections.

*Special orders require extended lead times.

Minimum order requirements may apply.

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

GREY

BLACK GLACIER GREY

WHITECHARCOAL GREYBLACK

PAISLEY

SHALE

COLOR COLLECTION

TRADITIONAL

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

Hiny Hiders Partitions Color/Texture: Bronze, Hammered

Aria Partitions Color/Texture: Blueberry, Orange Peel

Eclipse Partitions Color/Texture: White, Orange Peel

HUNTER GREEN BURGUNDY

MIDNIGHTFRENCH BLUEFOSSIL

BLUEBERRY

COLOR COLLECTION

BOLD

AVAILABLE IN: Standard

AVAILABLE IN: Standard

Standard, Class B Standard, Black & Stainless Only

Standard Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

AVAILABLE IN: Standard

HAMMERED GRIP EX

TEXTURES LEGEND

ROTARY

BRUSHED

ORANGE

PEEL

Scranton, PA 18505

800.445.5148

Info@ScrantonProducts.com www.ScrantonProducts.com

WE DON’T JUST TALK TOUGH.

WE BACK IT UP.

Just as there’s no limit to the toughness of Scranton Products bathroom partitions, now there’s no limit to color choices either.

Look inside and see which of our many style options best fits

BATHROOM PARTITIONS

LOCKERS

LOCKER ROOM BENCHES

SHOWER CUBICLES

DRESSING COMPARTMENTS

VANITIES

PARTITION

COLORS & TEXTURES

MAHOGANY CONCRETE

LINEN SANDCASTLEDESERT BEIGE

MOCHA

SANDSTONE

COLOR COLLECTION

WARM TONE

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

STAINLESS NICKEL

NICKELBRONZESTAINLESS

STAINLESS

BRONZE

COLOR COLLECTION

METALLIC

CUSTOM COLORS AVAILABLE UPON REQUEST

Color matching is limited by printing process. Actual samples are available and recommended prior to color selections.

*Special orders require extended lead times.

Minimum order requirements may apply.

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

GREY

BLACK GLACIER GREY

WHITECHARCOAL GREYBLACK

PAISLEY

SHALE

COLOR COLLECTION

TRADITIONAL

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

Hiny Hiders Partitions Color/Texture: Bronze, Hammered

Aria Partitions Color/Texture: Blueberry, Orange Peel

Eclipse Partitions Color/Texture: White, Orange Peel

HUNTER GREEN BURGUNDY

MIDNIGHTFRENCH BLUEFOSSIL

BLUEBERRY

COLOR COLLECTION

BOLD

AVAILABLE IN: Standard

AVAILABLE IN: Standard

Standard, Class B Standard, Black & Stainless Only

Standard Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

AVAILABLE IN: Standard

HAMMERED GRIP EX

TEXTURES LEGEND

ROTARY

BRUSHED

STAINLESS NICKEL

NICKELBRONZESTAINLESS

STAINLESS

BRONZE

COLOR COLLECTION

METALLIC

CUSTOM COLORS AVAILABLE UPON REQUEST

Color matching is limited by printing process. Actual samples are available and recommended prior to color selections.

*Special orders require extended lead times.

Minimum order requirements may apply.

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard

GREY

BLACK GLACIER GREY

WHITECHARCOAL GREYBLACK

PAISLEY

SHALE

COLOR COLLECTION

TRADITIONAL

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

Hiny Hiders Partitions Color/Texture: Bronze, Hammered

Aria Partitions Color/Texture: Blueberry, Orange Peel

Eclipse Partitions Color/Texture: White, Orange Peel

HUNTER GREEN BURGUNDY

MIDNIGHTFRENCH BLUEFOSSIL

BLUEBERRY

COLOR COLLECTION

BOLD

AVAILABLE IN: Standard

AVAILABLE IN: Standard

Standard, Class B Standard, Black & Stainless Only

Standard Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

AVAILABLE IN: Standard

HAMMERED GRIP EX

TEXTURES LEGEND

ROTARY

BRUSHED

Scranton, PA 18505

800.445.5148

Info@ScrantonProducts.com www.ScrantonProducts.com

WE DON’T JUST TALK TOUGH.

WE BACK IT UP.

Just as there’s no limit to the toughness of Scranton Products bathroom partitions, now there’s no limit to color choices either.

Look inside and see which of our many style options best fits

BATHROOM PARTITIONS

LOCKERS

LOCKER ROOM BENCHES

SHOWER CUBICLES

DRESSING COMPARTMENTS

VANITIES

PARTITION

COLORS & TEXTURES

MAHOGANY CONCRETE

LINEN SANDCASTLEDESERT BEIGE

MOCHA

SANDSTONE

COLOR COLLECTION

WARM TONE

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard, Fire Rated (Class B, Class A NFPA 286)

AVAILABLE IN: Standard

AVAILABLE IN: Standard

Scranton, PA 18505

800.445.5148

Fax: 800.551.6993 info@scrantonproducts.com www.scrantonproducts.com

WE DON’T JUST TALK TOUGH.

WE BACK IT UP.

Proudly made in the USA, Scranton Products’ brands provide industry-leading protection. Because Scranton Products is so confident that our solid plastic partitions and lockers will stand the test of time, they’re backed with a full 25-year limited warranty covering breakage, corrosion and delamination under normal conditions.

BATHROOM PARTITIONS

LOCKERS

LOCKER ROOM BENCHES

SHOWER CUBICLES

DRESSING COMPARTMENTS

VANITIES

MAKE YOUR TEAM LOGO STAND-OUT

MAKE YOUR BRAND STAND-OUT

ENGRAVING

UNLOCK

YOUR CREATIVITY

We are proud to showcase our engraving work at famed Wrigley Field, home of the Chicago Cubs.

H in y H id e rs P a rt it io n s

C o lo r:

B la ck

T e xt u re

E x, E n g ra vi n g

O n e -C o lo r P ro ce ss

We have installed our engraved partitions and lockers in locations such as Wrigley Field, Oklahoma State University, Venise High Scool and more. Our unique engraving process can be utilized in both the locker and restroom areas. Our logo and text engraving service in conjunction with our products not only adds eye appeal but provides opportunity for brand awareness, advertising, and team pride.

MAKE IT

YOUR OWN

ENGRAVING

• Offered in 27 colors, 4 textures

• Offered in 9 colors in a Orange Peel texture

SHALE

CONCRETE

MAHOGANY

BRONZE

NICKEL

STAINLESS

WHITE

BURGUNDY

CHARCOAL GREYFOSSIL

GREY

BLUEBERRY

HUNTER GREEN

LINENMOCHA

DESERT BEIGE

BLACK

GLACIER GREY

PAISLEY

SANDCASTLE

FRENCH BLUE

SANDSTONE

ROTARY BRUSHED

HAMMERED

ORANGE PEEL

EX

CUSTOM COLORS AVAILABLE UPON REQUEST.

*Minimum order requirements may apply.

CUSTOM COLORS AVAILABLE UPON REQUEST.

*Minimum order requirements may apply.

SANDCASTLE

GREY

BURGUNDY

CHARCOAL GREY

HUNTER GREEN

GLACIER GREY

BLUEBERRY

DESERT BEIGEBLACK

H in y H id e rs P a rt it io n s

C o lo r:

B la ck

T e xt u re

O ra n g e P e e l, E n g ra vi n g

O n e

-C o lo r

P ro ce ss

D o o r:

T ra d it io n a l

Hiny Hiders Partitions®

Color: Custom Orange

Tufftec Lockers®

Color: Grey

PARTITIONS

LOCKERS

COLORS

SIGNATURE DOOR PANEL ENGRAVINGS

SIDE PANEL

ENGRAVING

TEXTURES

Engraving is done directly on the partitions and lockers.

One Color Engraving

Engraving: Black/White/Black

Tufftec Lockers®

Color: Black Engraving: Black/White/Black

Hiny Hiders Partitions®

Color: Black Engraving: Custom Color, Blue/Black/Blue

PARTITIONS LOCKERS

The two color process is done by an inset in the partition and lockers.

Two Color Engraving

INSET COLORS

Beige, Green, Beige

Blue, Yellow, Blue

Green, Beige, Green

Yellow, Red, Yellow

Black, White, Black

TRADITIONAL

TRADITIONAL

MODERN

MODERN

MODERN

MODERN

TWO PANEL

Scranton Products High Density Polyethylene (HDPE) partitions can give you the same look and feel as traditional stainless steel partitions that you love today without all of the maintenance and durability issues. Our stainless steel rotary brushed color and finish gives the look you desire with all of the features and benefits of solid plastic.

Stainless Steel Partitions

Manufactured with a honeycomb or wood core glued under pressure to #304 stainless steel sheets and assembled with roll formed molding.

The corners are then welded and ground smooth.

High Density Polyethylene Partitions

Are comprised of high density polyethylene resin & pigments and are solid throughout. Fabricated into partitions by using streamline Tenoners and finished with beveled edges.

Not all bathroom partitions are solid throughout. Some partitions have a honeycomb or wood core and are at high risk for moisture penetration. This risk increases dramatically when these materials are placed in damp and wet environments such as shower rooms and restrooms.

Scranton Products partitions available in our metallic color collection provide the toughness of solid plastic with the brilliance of metal.

Eclipse Partitions: Color: Stainless Steel

Texture: Rotary Brushed

Stainless steel partitions are typically made from 20-22 gauge #304 stainless. Dings, dents and even rust is very common on stainless steel partitions. You can eliminate these unsightly maintenance issues by choosing HDPE. Testing following ASTM standards show HDPE partitions have 59 times greater resistance to impacts when compared to stainless steel partitions and will absolutely never rust.

TOTAL PRODUCT COST VS. LENGTH OF WARRANTY

Scratches & Smudging Dents & Dings Rust

*Images of Stainless Steel Partitions

SP HDPE partitions have 59 times greater resistance to impacts than stainless steel

Impact Test

HDPE partition’s initial cost is lower than traditional stainless steel partitions and will provide significantly lower cost over time.

SAME LOOK MORE BENEFITS

DID YOU KNOW?

COMMON CHALLENGES

WITH STAINLESS STEEL

A SOLID ADVANTAGE

COST ADVANTAGE

THE COMPLETE LINE OF

SCRANTON PRODUCTS

BATHROOM PARTITIONS

LOCKERS

LOCKER ROOM BENCHES

SHOWER CUBICLES

DRESSING COMPARTMENTS

VANITIES

www.scrantonproducts.com 800.445.5148 info@scrantonproducts.com

ForInternal Use ONly

Guide to LEED v4 Credits

When you choose Scranton Products sustainable materials for your restrooms, lockers and other applica ons, you are suppor ng a healthier environment. Scranton Products High Density Polyethylene (HDPE) reduces environmental impact and offers both ini al and long-term improvements to the indoor air quality of your projects.

Incorpora ng Scranton Products HDPE sustainable materials can contribute points toward LEED v4 cer fica on in the following categories:

Material & Resources Recycled Content

REACH Op za on

Construc aste Diversion

Indoor Air Quality Low Emi ng Materials

Interior Ligh ng - Surface Reflectance

Material & Resources

LEED v4 Credit Informa on - Building Product Disclosure and Op miza on - Sourcing of Raw Materials

Op on 2. Leadership Extrac Prac ces (1 point)

Use products that meet at least one of the responsible extrac on criteria below for at least 25%, by cost, of the total value of permanently installed building products in the project.

Recycled Content. Recycled content is the sum of post-consumer recycled content plus one-half the pre-consumer recycled content, based on cost. Products mee ng recycled content criteria are valued at 100% of their cost for the purposes of credit achievement calcula on.

How Scranton Products Contributes to LEED v4 Recycled Content Credit

Scranton Products uses factory responsible recycling to incorporate between 30 and 85% recycled content in each product. This recycled content is made up of both post-consumer and pre-consumer materials. Refer to the charts below for recycled content by color for HDPE Solid Plas c Bathroom Par ons and Lockers made by Scranton Products.

TM

Post Pre Post Pre Black 50% 30% 50% 0% Blueberry 50% 30% 50% 0% Burgundy 50% 20% 50% 0% Charcoal Grey 50% 30% 50% 0% Desert Beige 50% 15% 50% 0% Fossil 50% 0% Glacier Grey 50% 15% 50% 0% Grey 50% 20% 50% 0% Hunter Green 50% 20% 50% 0% Red 50% 0% Royal Blue 50% 0% Sandcastle 50% 15% 50% 0% Steel Blue 50% 0% Violet 50% 0% Yellow 50% 0%

Tufftec Duralife Color

Post-Consumer & Pre-Consumer Recycled Content

Scranton Products Bathroom Partitions Scranton Products Lockers

Post Pre Post Pre Black 0% 85% 0% 25% Blueberry 35% 35% 0% 25% Bluestone 10% 20% Bronze 30% 10% 0% 25% Burgundy 10% 40% Charcoal Grey 35% 35% 0% 25% Concrete 10% 20% Desert Beige 35% 5% 0% 25% Fossil 20% 10% Glacier Grey 0% 40% Gravel 0% 30% Grey 35% 15% 0% 25% Hunter Green 20% 30% Linen 10% 30% 0% 25% Mahogany 10% 20% Mocha 20% 20% 0% 25% Nickel 30% 10% 0% 25% Onyx 0% 70% Paisley 0% 70% 0% 25% Parchment 10% 20% Sandcastle 10% 30% Sandstone 10% 30% Shale 20% 30% Stainless Steel 20% 20% 0% 25% Storm 20% 30% Titanium 20% 10% White 0% 30%

Color Hiny Hiders & Eclipse Partitions

Standard Fire-Rated

LEED v4 Credit Information - Building Product Disclosure and Optimization - Material Ingredients

Option 2. Material Ingredient Optimization (1 point)

Use products that document their material ingredient optimization using the paths below for at least 25%, by cost, of the total value of permanently installed products in the project.

International Alternative Compliance Path – REACH Optimization. End use products and materials that do not contain substances that meet REACH criteria for substances of very high concern. If the product contains no ingredients listed on the REACH Authorization or Candidate list, value at 100% of cost.

How Scranton Products Contributes to LEED v4 REACH Optimization

The solid plastic sheet material used to construct Scranton Products bathroom partitions and lockers is not manufactured or formulated above the 0.1% threshold, with any of the 161 Substances of Very High Concern (SVHC) listed in the candidate list that is current as of the effective date of December 17, 2014 (http://echa.europa.eu/web/guest/candidate-list-table).

LEED v4 Credit Information – Building Product Disclosure and Optimization - Local Sourcing

For Building Product Disclosure and Optimization credit achievement calculation (Recycled Content and REACH Optimization), products sourced (extracted, manufactured, and purchased) within 100 miles (160 km) of the project site are valued at 200% of their base contributing cost.

How Scranton Products Contributes to LEED v4 Local Sourcing

Below is a map showing a 100 mile radius from Scranton Products manufacturing location at 801 East Corey Street, Scranton, PA 18505.

LEED v4 Credit Information - Construction and demolition waste management

Recycle and/or salvage nonhazardous construction and demolition materials. Calculations can be by weight or volume but must be consistent throughout.

Option 1. diversion (1-2 points)

Path 1. divert 50% and three material streams (1 point)

Divert at least 50% of the total construction and demolition material; diverted materials must include at least three material streams.

Path 2. divert 75% and four material streams (2 points)

Divert at least 75% of the total construction and demolition material; diverted materials must include at least four material streams.

Option 2. reduction of total waste material (2 points)

Do not generate more than 2.5 pounds of construction waste per square foot (12.2 kilograms of waste per square meter) of the building's floor area.

How Scranton Products Contributes to LEED v4 Construction Waste Diversion

Scranton Products HDPE solid plastic products are 100% recyclable. Scranton Products offers a program by which all unwanted solid plastic articles we manufacture can be returned for recycling. Please contact a customer service agent for more information.

Indoor Environmental Quality

LEED v4 Credit Information - Low Emitting Materials

Furniture evaluation. New furniture and furnishing items must be tested in accordance with ANSI/BIFMA Standard Method M7.1–2011. Comply with ANSI/BIFMA e3-2011 Furniture Sustainability Standard, Sections 7.6.1 and 7.6.2, using either the concentration modeling approach or the emissions factor approach. Model the test results using the open plan, private office, or seating scenario in ANSI/BIFMA M7.1, as appropriate. USGBC-approved equivalent testing methodologies and contaminant thresholds are also acceptable. For classroom furniture, use the standard school classroom model in CDPH Standard Method v1.1.

Documentation submitted for furniture must indicate the modeling scenario used to determine compliance.

Salvaged and reused furniture more than one year old at the time of use is considered compliant, provided it meets the requirements for any site-applied paints, coatings, adhesives, and sealants.

How Scranton Products Contributes to LEED v4 Low Emitting Materials

Scranton Products solid plastic bathroom partitions and lockers are GREENGUARD Gold certified. Please click on the link below to download GREENGUARD certification documents http://productguide.ulenvironment.com/SearchResults.aspx?BrandID=1033. In addition, Scranton Products solid plastic HDPE products do not require any site-applied paints, coatings, adhesives or sealants. Power-washable and steam cleanable means harmful chemical cleaners are not needed.

LEED v4 Credit Information - Interior lighting

Hiny Hiders & Eclipse Resistall Tu ec Duralife Black 4 Blueberry 6 Bluestone 32 Bronze 22 Burgundy 8 Charcoal Grey 15 Chestnut 8 Concrete 36 Desert Beige 40 Fossil 24 Glacier Grey 72 Gravel 35 Grey 33 Hunter Green 7 Linen 63 Mahogany 5 Mocha 31 Nickel 30 Onyx 5 Paisley 4 Parchment 54 Red 11 Royal Blue 7 Sandcastle 50 Sandstone 44 Shale 11 Stainless Steel 31 Steel Blue 28 Storm 11 Titanium 33 Violet 9 White 87 Yellow 49

Op on 2. Ligh ng quality (1 point)

Choose four out of seven strategies.

E. For 90% of the regularly occupied floor area, meet the following thresholds for area-weighted average surface reflectance: 85% for ceilings, 60% for walls, and 25% for floors.

F. If furniture is included in the scope of work, select furniture finishes to meet the following thresholds for area-weighted average surface reflectance: 45% for work surfaces, and 50% for movable par ons.

G. For 75% of the regularly occupied floor area, meet ra of average wall surface illuminance (excluding fenestra n) to average work plane (or surface, if defined) illuminance that does not exceed 1:10. Must also meet strategy E, strategy F, or demonstrate area-weighted surface reflectance of 60% for walls.

How Scranton Products Contributes to LEED v4 Interior Ligh ng

Scranton Products offers several colors with a surface reflectance greater than 50% as measured using Light Reflectance Value (LRV).

SP-07 Rev. 03022015

SECTION 10155

SCRANTON PRODUCTS HINY HIDERS HDPE

TOILET COMPARTMENTS

** NOTE TO SPECIFIER ** Scranton Products; toilet compartments, vanities, privacy screens, shower cubicles, dressing compartments, lockers and locker benches.

This section is based on the products of Scranton Products, which is located at:

801 E. Corey St.

Scranton, PA 18505 Toll Free Tel: (800) 445-5148 Fax: (800) 551-6993 Email: info@scrantonproducts.com Web: http://www.scrantonproducts.com

With over 30 years of experience, Scranton Products is the industry leader in plastic bathroom partitions and lockers. Constructed from premium, American-made solid plastic, our products resist dents, scratches, corrosion and graffiti and mildew. When you purchase Scranton Products, you are investing in peace of mind. With unmatched durability and array of designer colors and textures, Scranton Products installs confidence in every project.

Why Performance Plastics?

Bathroom partitions and lockers are placed in harsh, high traffic environments that tend to be damp, making the materials susceptible to mold, mildew and rust. It is also common to encounter graffiti and vandalism in these public spaces.

It is important to invest in a worry-free product that will save you time and money.

Solid plastic partitions and lockers are built to last, down to every detail. Graffiti can be easily wiped clean with a common non-abrasive cleaner, and since Scranton Products performance plastic is formulated with a solid color throughout, scratches are difficult to see. Compared to other traditional material types, performance plastic has a greater resistance to impacts and dents providing you with a low maintenance product that will look great for years

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Solid plastic toilet compartments including the following: (Hiny Hiders)

1. Floor mounted overhead-braced toilet compartments.

2. Floor-to-ceiling toilet compartments.

3. Ceiling hung toilet compartments.

4. Privacy screens.

5. Shower and dressing compartments.

10155-10 mailto:info@scrantonproducts.com http://www.scrantonproducts.com/

6. Vanities

1.1 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Section 05500 - Metal Fabrications: Structural support ceiling beam for ceiling hung partitions provided as Work of Section 05500; Unistrut channels not acceptable.

B. Section 06100 - Rough Carpentry: Anchorage/blocking for attachment of partitions.

1.2 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. ASTM A 666 - Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip.

B. ASTM B 221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes.

C. National Fire Protection Association (NFPA) 286 - Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth.

D. ASTM E 84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

1.3 SUBMITTALS

A. Submit under provisions of Section 01300.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods.

A. Shop Drawings: Provide layout drawings and installation details with location and type of hardware required.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

B. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

C. Verification Samples: For each finish product specified, two samples representing actual product, color, and patterns.

D. Sustainable Design Submittals:

1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content.

10155-10

1. Regional Materials: Certify distance between manufacturer and Project and between manufacturer.

1.1 QUALITY ASSURANCE

A. Manufacturer Qualifications: A company regularly engaged in manufacture of products specified in this section, and whose products have been in satisfactory use under similar service conditions for not less than 5 years.

B. Installer Qualifications: A company regularly engaged in installation of products specified in this Section, with a minimum of 5 years experience.

C. Materials: Doors, panels and pilasters shall be constructed from High Density Polyethylene (HDPE) resins. Partitions shall be fabricated from polymer resins compounded under high pressure, forming a single component which is waterproof, nonabsorbent and has a self-lubricating surface that resists marks from pens, pencils, markers and other writing instruments. All plastic components shall be covered with a protective plastic masking.

D. Performance Requirements:

1. Fire Resistance: Partition materials shall comply with the following requirements, when tested in accordance with the ASTM E 84: Standard Test Method for Surface Burning Characteristics of Building Materials:

** NOTE TO SPECIFIER ** Delete class not required.

a. Class A flame spread/smoke developed rating, tested to ASTM E84.

b. Class B flame spread/smoke developed rating, tested to ASTM E84.

1. Material Fire Ratings:

a. National Fire Protection Association (NFPA) 286: Pass.

b. International Code Council (ICC): Class B.

1.1 DELIVERY, STORAGE, AND HANDLING

A. Store products in manufacturer's unopened packaging until ready for installation.

1.2 PROJECT CONDITIONS

A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.3 WARRANTY

A. Manufacturer guarantees its plastic against breakage, corrosion, and delamination under normal conditions for 25 years from the date of receipt by the customer. If materials are found to be defective during that period for reasons listed above, the materials will be replaced free of charge. (Labor not included in warranty.)

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Scranton Products, which is located at: 801 E. Corey St. ;

Scranton, PA 18507; Toll Free Tel: 800-445-5148; Email: request info (info@scrantonproducts.com); Web: www.scrantonproducts.com

1. Fabricator: Santana Toilet Partitions.

2. Fabricator: Comtec Toilet Partitions.

10155-10 http://www.scrantonproducts.com/ http://admin.arcat.com/users.pl?action=UserEmail&company=Scranton%20Products&coid=45422&rep=&fax=&message=RE:%20Spec%20Question%20(10155spi):%20%20&mf= http://admin.arcat.com/users.pl?action=UserEmail&company=Scranton%20Products&coid=45422&rep=&fax=&message=RE:%20Spec%20Question%20(10155spi):%20%20&mf=

1. Fabricator: Capitol Toilet Partitions.

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

A. Substitutions: Not permitted.

A. Requests for substitutions will be considered in accordance with provisions of Section 01600.

1.2 MATERIAL

A. Plastic Panels: High density polyethylene (HDPE) suitable for exposed applications, waterproof, non-absorbent, and graffiti-resistant textured surface;

** NOTE TO SPECIFIER ** Delete fire-resistance rating not required.

1. Fire Rating: Not required.

2. Fire-resistance Rating: Class A.

3. Fire-resistance Rating: Class B.

4. Fire-resistance Rating: NFPA 286.

** NOTE TO SPECIFIER ** Delete recycled content not required. Verify amount of recycled content available for panels selected.

5. Recycled Content (Post Industrial): 25 %.

6. Recycled Content (Post Industrial): 100 %.

7. Recycled Content (Post Consumer): 100 %.

A. Zinc Aluminum Magnesium and Copper Alloy (Zamac): ASTM B 86.

B. Stainless Steel Castings: ASTM A167, Type 304.

C. Aluminum: ASTM 6463-T5 alloy.

** NOTE TO SPECIFIER ** With tough construction and rugged good looks, Hiny Hiders Partitions offer durability that will save customers time, hassle, and maintenance costs. Hiny Hiders Partitions offer superior value that simply can’t be beat by the competition.

1.3 SOLID PLASTIC TOILET COMPARTMENTS

A. Basis of Design: Hiny Hiders Toilet Partitions as manufactured by and supplied by Scranton Products.

** NOTE TO SPECIFIER ** Delete style not required.

1. Style: Floor mounted overhead-braced toilet compartments.

2. Style: Floor-to-ceiling toilet compartments.

3. Style: Ceiling hung toilet compartments.

A. Doors, panels, and pilasters shall be 1 inch (25 mm) thick with all edges rounded to a radius. Doors and dividing panels shall be mounted based on height of specified system.

** NOTE TO SPECIFIER ** Delete panel/door height not required.

1. Door and Panel Height: 55 inches standard (1397 mm) (standard).

1. Door and Panel Height: 66 inches high (1676 mm) (requires a modular panel).

2. Door and Panel Height: 72 inches extra high (1829 mm) (requires a modular panel).

** NOTE TO SPECIFIER ** Delete if heat sink not required for fire rating.

a. Aluminum heat sink fastened to bottom edges.

** NOTE TO SPECIFIER ** Delete door design not required.

1. Door Design: Traditional 2600.

2. Door Design: Traditional 2800.

3. Door Design: Modern 3000.

4. Door Design: Modern 3200.

5. Door Design: Modern 3800.

6. Door Design: Modern 4000.

7. Door Design: Two panel side panel design.

** NOTE TO SPECIFIER ** Delete door & pilaster edge not required.

11. Door & Pilaster Edge: Standard.

12. Door & Pilaster Edge: Shiplap.

13. Pilasters shall be 82 inches (2083 mm) high fastened to floor.

** NOTE TO SPECIFIER ** Delete series and series color not required.

A. Panel Color: Traditional Series:

1. Black - Orange Peel.

2. Black - Grip Ex.

3. Paisley - Orange Peel.

4. Shale - Orange Peel.

5. Charcoal Grey - Orange Peel.

6. Grey - Orange Peel.

7. Glacier Grey - Orange Peel.

8. White - Orange Peel.

A. Panel Color: Bold Series:

1. Fossil - Orange Peel.

2. Hunter Green - Orange Peel.

3. Burgundy - Orange Peel.

4. Blueberry - Orange Peel.

5. French Blue - Orange Peel.

A. Panel Color: Warm Series:

6. Mahogany - Orange Peel.

7. Concrete - Orange Peel.

8. Linen - Orange Peel.

9. Sandcastle - Orange Peel.

10. Sandstone - Orange Peel.

1. Desert Beige - Orange Peel.

2. Mocha - Orange Peel.

A. Panel Color: Metallic Series:

1. Bronze – Hammered.

2. Bronze - Rotary Brushed.

3. Nickel – Hammered.

4. Nickel - Rotary Brushed.

5. Stainless – Hammered.

6. Stainless - Grip Ex.

7. Stainless - Rotary Brushed.

** NOTE TO SPECIFIER ** Delete if pilaster shoes not required. Delete shoe material not required.

20. Pilaster shoes shall be 3 inches (76 mm) high stainless steel (type 304, 20 gauge) secured to the pilaster with a stainless steel tamper resistant Torx head sex bolt.

21. Pilaster shoes shall be 3 inches (76 mm) high one-piece molded HDPE secured to the pilaster with a stainless steel tamper resistant Torx head sex bolt.

** NOTE TO SPECIFIER ** Delete pilaster plastic shoe color not required.

b. Pilaster Plastic Shoe Color: Mocha.

c. Pilaster Plastic Shoe Color: Black.

d. Pilaster Plastic Shoe Color: Grey.

e. Pilaster Plastic Shoe Color: Linen.

f. Pilaster Plastic Shoe Color: Beige.

g. Pilaster Plastic Shoe Color: Blueberry.

** NOTE TO SPECIFIER ** Delete if not required.

A. Headrail shall be made of heavy-duty extruded aluminum (6463-T5 alloy) with anti-grip design. The headrail shall have a clear anodized finish and shall be fastened to the headrail bracket by a stainless steel tamper resistant Torx head sex bolt, and fastened at the top of the pilaster with stainless steel tamper resistant Torx head screws.

Headrail brackets shall be 20 gauge stainless steel with a satin finish and secured to the wall with a stainless steel tamper resistant Torx head screws.

A. Wall Brackets:

** NOTE TO SPECIFIER ** Delete wall bracket material not required.

1. Aluminum Brackets: Wall brackets shall be made of heavy-duty aluminum 6463-T5 alloy.

2. Extruded PVC Brackets: Wall brackets shall be made of extruded PVC plastic.

3. Stainless Steel Brackets: Wall brackets shall be made of stainless steel type 304.

4. The brackets are fastened to the pilaster with stainless steel tamper resistant Torx head screws and fastened to the panels with stainless steel tamper resistant Torx head sex bolts.

** NOTE TO SPECIFIER ** Delete bracket not required. Stirrup brackets in metal only. Continuous brackets in metal and plastic with 68 inches (1727 mm) in aluminum only.

5. Bracket Type: Stirrup double ear aluminum.

6. Bracket Type: Stirrup single ear aluminum.

7. Bracket Type: Stirrup stainless steel double ear.

8. Bracket Type: Stirrup stainless steel single ear.

9. Bracket Type: Continuous 54 inches (1372 mm) plastic.

10. Bracket Type: Continuous 54 inches (1372 mm) stainless steel.

11. Bracket Type: Continuous 54 inches (1372 mm) aluminum.

12. Bracket Type: Continuous 68 inches (1727 mm) aluminum.

A. Door Hardware:

** NOTE TO SPECIFIER ** Delete hinge type not required.

1. Hinges: 54 inches (1372 mm) continuous aluminum.

2. Hinges: 65 inches (1651 mm) continuous aluminum.

3. Hinges: 71 inches (1803 mm) continuous aluminum.

4. Hinges: 54 inches (1372 mm) continuous stainless steel helix.

5. Hinges: 71 inches (1803 mm) continuous stainless steel helix.

6. Hinges: 54 inches (1372 mm) continuous stainless steel spring loaded.

7. Vault Hinge: Heavy-duty diecast vault zamac hinge shall have gravity-acting cams and are fabricated from a die cast aluminum alloy with a brushed finish and wrap around flanges. The cam is constructed from ¾” diameter nylon rod and a 3/8” stainless steel pin.

8. Integral Hinges (Stealth): Hinges shall be integral, fabricated in the door and pilaster with no exterior exposed metal parts. Hinges operate with field adjustable nylon cams. Cams can be field adjusted to any degree.

9. Wrap-Around Hinges: Hinges shall be 8 inches (203 mm) and fabricated from heavy-duty extruded aluminum wrap-around hinges through-bolted to pilasters and doors with stainless steel tamper resistant Torx head sex bolts. Hinges operate with field adjustable nylon cams. Cams can be field set in 30, 60 or 90-degree increments.

10. Wrap-Around Hinges (Regal): Hinges shall be fabricated from heavy-duty cast aluminum, wrap around flanges through bolted to doors and pilasters. Hinges operate with field adjustable nylon cams. Cams can be field set in 30, 60 or 90-degree increments.

11. Door strike/keeper shall be made of heavy-duty extruded aluminum (6436-T5 alloy) with a bright dip anodized finish and secured to the pilasters with stainless steel tamper resistant Torx head sex bolts. Bumper shall be made of extruded black vinyl.

** NOTE TO SPECIFIER ** Delete strike style not required.

a. Style: 6 inches (152 mm) aluminum

a. Style: 54 inches (1372 mm) aluminum

b. Style: 65 inches (1651 mm) aluminum

c. Style: 71 inches (1803 mm) aluminum

d. Style: 3 inches (76 mm) stainless steel emergency access

** NOTE TO SPECIFIER ** Delete latch type not required.

12. Aluminum Slide Bolt Latch and housing shall be made of heavy-duty extruded aluminum (6463-T5 alloy). The latch housing shall have a bright dip anodized finish, and the slide bolt and button shall have a black anodized finish.

13. Aluminum Paddle Latch and housing shall be made of heavy-duty extruded aluminum (6463-T5 alloy). The latch housing and paddle shall have a bright dip anodized finish.

14. Stainless Steel Slide Bolt Latch and housing shall be made of heavy-duty stainless steel type 304. The latch housing shall have a bright finish, and the slide bolt and button shall have a black anodized finish.

15. Stainless Steel Paddle Latch and housing shall be made of heavy-duty stainless steel type 304. The latch housing and paddle shall have a bright finish.

16. Provide occupancy indicator.

** NOTE TO SPECIFIER ** Delete if not required.

17. Each door shall be supplied with one coat hook/bumper and door pull made of chrome plated Zamak.

** NOTE TO SPECIFIER ** Delete if not required.

18. Equip outswing handicapped doors with second door pull and door stop.

** NOTE TO SPECIFIER ** Delete if not required.

1.1 SOLID PLASTIC PRIVACY SCREENS

A. Provide plastic privacy screens in urinal and entry toilet room applications as indicated or scheduled.

B. Panels, and pilasters, if required, shall be 1 inch (25 mm) thick with all edges rounded to a radius. Screens shall be mounted at 14 inches (356 mm) above the finished floor. Color as selected by Architect from manufacturer's full line of current colors.

** NOTE TO SPECIFIER ** Delete if heat sink not required for fire rating.

1. Aluminum heat sink fastened to bottom edges.

** NOTE TO SPECIFIER ** insert recycled content required. Delete if recycled content not required.

2. Recycled content: Minimum 25 percent.

** NOTE TO SPECIFIER ** Delete mounting type not required.

C. Type: Wall mounted screen.

** NOTE TO SPECIFIER ** Delete screen height not required.

1. Screen: Urinal screens shall be 18 inches (457 mm) wide by 42 inches (1067 mm) high.

1. Screen: Urinal screens shall be 18 inches (457 mm) wide by 55 inches (1397 mm) high.

2. Screen: Urinal screens shall be 24 inches (610 mm) wide by 42 inches (1067 mm) high.

3. Screen: Urinal screens shall be 24 inches (610 mm) wide by 55 inches (1397 mm) high.

A. Type: Pilaster supported screen.

** NOTE TO SPECIFIER ** Delete configuration not required.

1. Configuration: Floor to ceiling pilaster supported screen.

2. Configuration: Floor pilaster supported screen.

3. Configuration: Ceiling pilaster supported screen.

** NOTE TO SPECIFIER ** Delete screen height not required.

4. Screen: Urinal screens shall be 18 inches (457 mm) wide by 42 inches (1067 mm) high.

1. Screen: Urinal screens shall be 18 inches (457 mm) wide by 55 inches (1397 mm) high.

2. Screen: Urinal screens shall be 24 inches (610 mm) wide by 42 inches (1067 mm) high.

3. Screen: Urinal screens shall be 24 inches (610 mm) wide by 55 inches (1397 mm) high.

** NOTE TO SPECIFIER ** Delete pilaster height not required.

8. Pilaster: Pilaster screens shall be 56 inches (1422 mm) high.

9. Pilaster: Pilaster screens shall be 69 inches (1600 mm) high.

10. Pilaster: Pilaster screens shall be 82 inches (2083 mm) high.

** NOTE TO SPECIFIER ** Headrail and headrail bracket used with 82 inches (2083 mm) high floor mounted pilaster only. Delete if not required.

11. Headrail shall be made of heavy-duty extruded aluminum (6463-T5 alloy) with anti-grip design and integrated curtain track. The headrail shall have a clear anodized finish and shall be fastened to the headrail bracket by a stainless steel tamper resistant Torx head sex bolt, and fastened at the top of the pilaster with stainless steel tamper resistant Torx head screws

12. Headrail brackets shall be 20 gauge stainless steel with a satin finish and secured to the wall with a stainless steel tamper resistant Torx head screws.

** NOTE TO SPECIFIER ** Floor to ceiling pilaster configuration only. Delete if not required.

13. Floor to Ceiling Supported Pilaster: A stainless steel angle shall be used to attach pilasters to floor and ceiling. These angles shall be attached to pilasters with 3/4 inch (19 mm) stainless steel tamper resistant Torx head screws. Pilaster sleeves shall be 4 inches (102 mm) high.

** NOTE TO SPECIFIER ** Delete sleeve material not required.

a. Pilaster sleeves shall be stainless steel (type 304, 20 gauge) secured to the pilaster with a stainless steel tamper resistant Torx head sex bolt.

a. Pilaster sleeves shall one-piece molded HDPE secured to the pilaster with a stainless steel tamper resistant Torx head sex bolt.

** NOTE TO SPECIFIER ** Delete plastic pilaster shoe color not required.

c. Pilaster Shoe Color: Mocha.

d. Pilaster Shoe Color: Black.

e. Pilaster Shoe Color: Grey.

f. Pilaster Shoe Color: Linen.

g. Pilaster Shoe Color: Beige.

h. Pilaster Shoe Color: Blueberry.

** NOTE TO SPECIFIER ** Floor and ceiling pilaster configuration only. Delete if not required.

1. Pilaster sleeves shall be 3 inches (76 mm) high secured to the pilaster with a stainless steel tamper resistant Torx head sex bolt.

** NOTE TO SPECIFIER ** Delete sleeve material not required.

a. Pilaster sleeves shall be stainless steel (type 304, 20 gauge) secured to the pilaster with a stainless steel tamper resistant Torx head sex bolt.

a. Pilaster sleeves shall be one-piece molded HDPE secured to the pilaster with a stainless steel tamper resistant Torx head sex bolt.

** NOTE TO SPECIFIER ** Delete bracket type not required.

A. Wall brackets shall be made of extruded PVC plastic. Brackets are fastened to the panel/pilaster with stainless steel tamper resistant torx head screws and fastened to the wall with stainless steel tamper resistant torx head sex bolts.

** NOTE TO SPECIFIER ** Delete length not required.

1. Wall brackets shall be 41 inches (1041 mm) long.

1. Wall brackets shall be 54 inches (1327 mm) long.

** NOTE TO SPECIFIER ** Delete plastic bracket color not required.

a. Bracket Color: Mocha.

b. Bracket Color: Black.

c. Bracket Color: Grey.

d. Bracket Color: Linen.

e. Bracket Color: Beige.

f. Bracket Color: Blueberry.

A. Wall brackets shall be 1-1/2 inches (38 mm) stirrup type made of heavy-duty aluminum (6463-T5 alloy). Stirrup brackets shall be fastened to panel/pilaster with stainless steel tamper resistant Torx head sex bolts.

1.1 SOLID PLASTIC SHOWER AND DRESSING COMPARTMENTS

A. Provide plastic privacy screens in shower room applications as indicated or scheduled.

B. Panels and pilasters shall be 1 inch (25 mm) thick with all edges rounded to a radius.

Screens shall be mounted at 14 inches (356 mm) above the finished floor. Color as selected by Architect from manufacturer's full line of current colors.

** NOTE TO SPECIFIER ** insert recycled content required. Delete if recycled content not required.

1. Recycled content: Minimum 25 percent.

A. Type: Floor mounted pilaster supported screen.

1. Panels: Panel screens shall be 76 inches (1930 mm) high.

2. Pilaster: Pilaster screens shall be 82 inches (2083 mm) high.

3. Headrail: Headrail shall be made of heavy-duty extruded aluminum (6463-T5 alloy) with anti-grip design and integrated curtain track. The headrail shall have a clear anodized finish and shall be fastened to the headrail bracket by a stainless steel tamper resistant Torx head sex bolt, and fastened at the top of the pilaster with stainless steel tamper resistant Torx head screws.

1. Headrail brackets shall be 20 gauge stainless steel with a satin finish and secured to the wall with a stainless steel tamper resistant Torx head screws.

2. Pilaster sleeves shall be 3 inches (76 mm) high. Pilaster sleeves shall be stainless steel (type 304, 20 gauge) secured to the pilaster with a stainless steel tamper resistant Torx head sex bolt.

3. Wall brackets shall be continuous made of heavy-duty aluminum (6463-T5 alloy) with a bright dip anodized finish.