TE_U_DID_A012,_OPSEC-Physcial_Security_SOP.PDF
PDF 162 KB Posted
- Attached to
- Base and Test Support Services Federal contract opportunity
- Solicitation number
- W91151-19-R-0003
About this file
This data item description outlines requirements for a contractor to develop an operational security and physical security standard operating procedure under solicitation W91151-19-R-0003. The contractor must submit the OPSEC SOP and physical security SOP within 30 calendar days of award to address requirements in Army regulations and policies from the U.S. Army Test and Evaluation Command, III Corps, and Fort Hood for deterring, detecting, responding to, and recovering from internal and external security threats. The SOPs must include training plans for initial and annual OPSEC awareness and describe security responsibilities and measures. The physical security SOP must also contain instructions for evacuation and safeguarding classified information, responding to bomb threats and terrorism, key control, site access control, use of night vision devices, and storage of sensitive items.
OPSEC- Physical Security
View the file
Other files for this federal contract opportunity
Show all 50
Base and Test Support Services has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Form Approved OMB No. 0704-0188
Page 1 of 1 Pages PREVIOUS EDITION MAY BE USED.DD FORM 1664, AUG 96 (EG)
DATA ITEM DESCRIPTION
1. TITLE
A012, Operational Security (OPSEC) Standard Operating Procedures (SOP)/Physical Security SOP
2. IDENTIFICATION NUMBER
3. DESCRIPTION/PURPOSE
Maintain an OPSEC and Security program by developing an Standing Operating Procedure (SOP)/Security Plan and submit it within 30 calendar days after contract award to the KO and COR.
4. APPROVAL DATE
(YYYYMMDD)
5. OFFICE OF PRIMARY RESPONSIBILITY (OPR) 6a. DTIC APPLICABLE 6b. GIDEP APPLICABLE
7. APPLICATION/INTERRELATIONSHIP
7. This data item description (DID) is uniquely applicable to OTC’s Test Support Contract (TSC). It provides data required by specific OTC entries to obtain life cycle replacement assessments.
8. APPROVAL LIMITATION 9a. APPLICABLE FORMS 9b. AMSC NUMBER
10. PREPARATION INSTRUCTIONS
10.1. The contractor shall provide an OPSEC SOP In Accordance With (IAW) Army Regulations 530-1,2-3a (3) and the Physical Security SOP IAW all OTC policies, ATEC, III Corps, and Fort Hood Physical Security procedures and regulations and all other DoD facility or installations.
10.2. The OPSEC SOP shall include a training plan that incorporates an initial OPSEC brief, continuous awareness, and annual OPSEC training. The SOP shall describe its responsibilities, and its measures.
10.3. The Physical Security SOP shall contain to both internal and external attack situations. It shall address the below critical elements with Emergency Evacuation, Safeguarding Classified Information, Reporting Bomb Threats, Demands, and Other Acts of Terrorism, Key Control, Access to Forward Test Centers, Night Visions Devices, and Sensitive Item Storage:
a. Deterrence
b. Detection
c. Response
d. Recovery
e. Instructions
10.4. Contractor format is acceptable.
11. DISTRIBUTION STATEMENT
Distribution Statement A: Approved for public release; distribution is unlimited.
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
Downloaded from http://www.everyspec.com
USAOTC G4
File details come from the government source that posted it. Updated .