Agenda_Site_Visit_17-B-0037_Replace_Grandstand_Seating_Bldg_1001_FH_17_Aug_17.doc

Agenda – Site Visit

W91151-17-B-0037 Replace Grand Stand Seating Building 1001, Fort Hood, Texas

22 August 2017, 9:00 A.M

a. Sign-In attendees

b. Description of Work: The work shall be located at building 1001, located at the intersection of TJ Mills Blvd and Phantom Warrior Drive, Fort Hood Texas. The exact location will be shown by the Contracting Officer. Building(s) will be occupied during performance of work under this Contract.

The purpose of this project is to replace grand stand seating, power wash and repaint the overhead cover of stage to match existing color, sand and repaint hand rail systems, cleanup all gutters, power wash and reseal all concrete area around seating, replace lighting in stage area with LED lighting with glass covers, power wash and repair concrete pad where tank has been removed, and install rain gutter splash blocks. Also included is miscellaneous site work to support the area and meet code requirements.

c. Introduction of Government Personnel

d. Administrative Matters

· Side bars need to be kept to a minimum during the site visit as not to miss important information from the Program Manager.

· No paper copies of the specifications and/or drawings will be provided today. This information was posted to FBO.

· Attention is directed to the Specifications at Division 1. The Government takes these contract performance requirements seriously and intends to enforce them to the full limit of the law.

· Project Manager, Quality Control and Superintendent Positions are considered key positions. These positions SHALL not be subcontracted below the prime contractor.

· All questions resulting from this meeting and site visit will be submitted in the form of a Request for Information (RFI). Any changes discussed here or the site will not be official unless an RFI is submitted.

· RFIs must be submitted through email. No RFIs should go directly to the program manager. Contracting will consolidate the questions and coordinate with the PM for answers.

Bentura.fernandez.civ@mail.mil

· As a contractor you are not permitted to discuss any open requirements with DPW or their staff, all questions, comments and/or concerns MUST go through your Contract Specialist. Any communication with the Program Manager and/or COR between this site visit and the award of the contract could cause your company to be ineligible for award.

· In accordance with FAR 52.236-6 you will have a superintendent on every job. The QCM is required to provide adequate quality control, but the superintendent must be on site whenever work is being performed. Pay attention to Division One Requirements and please bid accordingly.

· When you turn in your proposal be sure to turn in the line item estimate like RS Means.

Note: RS Means line item estimate is the preferred method, but alternate compatible/equal to RS Means methods that include a line item breakdown will be acceptable to the government.

· The site visit is your time and your subcontractors’ time to take all measurements and pictures, view the existing site conditions and conditions of area surrounding the job site. This is the only authorized visit to the job site. Use your time wisely since you will not be able to return the site after this visit.

· If you need access to an area that is not accessible please bring it to my attention during this site visit and I will let the PM know.

e. Project Info:

a. Magnitude: In accordance with FAR 36.204 the magnitude of this project is between $250,000.00 and $500,000.00.

b. NAICS Code: 238990 All Other Specialty Trade Contractors.

c. Period of Performance: 105 Calendar days.

f. Dates:

a. RFIs by email no later than 1:00 P.M. on 25 August 2017

b. Amendment/response due 29 August 2017

c. Sealed Bids due/Bid Opening: 2:00 P.M. on 14 September 2017 Note: Bidders are required to provide a CD copy of their bid documents with their submission.