W90VN824R0061.pdf

0012160112

a. This is a Request for Proposal (RFP) issued to existing Area I & II General Construction Multiple Aw ard Indef inite Delivery Indefinite Quantity (MA IDIQ) Contractors only

Contract Number: W91QV N-24-D-0001, 0002, 0003, 0004, 0005, 0006, 0007, 0008, 0009, 0010, 0011, 0012, 0013, 0014, 0015, 0016, 0017, 0018, 0019, 0020, 0082, 0099, 0103, 0107.

b. Site V isit: A ll MAIDIQ contractors w ho intend to propose on this solicitation are strongly recommended to attend the Site V isit. See Section L f or the schedule.

c. If the contractor is unable to submit the proposal in response to this RFP, the contractor shall submit the “No-off er letter” by closing date and time specif ied in the solicitation.

d. CONSTRUCTION PRICE RA NGE Pursuant to FAR 36.204 the estimated price range is between $500,000 TO $1,000,000

***Fund are not presently available f or this project. No aw ard w ill be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date.***

CPT DUVA LDA DRIA N, A LEXA NDER C. 315-755-0645

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

24-Jul-2024

(RFP)

(IFB)

X

CA LL:

Repair Quonset Hut Building S-1709, Camp Casey

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CF R) 53.236-1(e)

11. The Contractor shall begin perf ormance w ithin _______10 calendar days and complete it w ithin ________180 calendar days after receiving aw ard, X notice to proceed. This performance period is mandatory, negotiable. (See _________________________

12 A . THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE A ND PAY MENT BONDS?

( If "YES," indicate within how many calendar days after award in Item 12B.)

YES X NO

13. A DDITIONAL SOLICITA TION REQUIREMENTS:

A. Sealed of f ers in original and __________1 copies to perf orm the w ork required are due at the place specified in Item 8 by ___________ local time ______________14 Aug 2024 (date). If this is a sealed bid solicitation, of f ers must be publicly opened at that time.

shall be marked to show the of f eror's name and address, the solicitation number, and the date and time of f ers are due.

B. An of fer guarantee is, X is not required.

C. All of fers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in f ull text or by ref erence.

D. Of f ers providing less than _______70 calendar days f or Government acceptance af ter the date of f ers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair )

1. SOLICITATION NO.

IMPORTANT - The "offe r" se ction on the r eve rs e must be fully com ple ted by offer or .

4. CONTRACT NO.

7. ISSUED BY CODE

411TH CONTRACTING SUPPORT BRIGADE, KOREA

RCO CASEY

UNIT#15289

APO AP 96224-6224

UNITED STATES

W90V N8

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDA R DAY S

11:00 AM (hour)

Sealed envelopes containing off ers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

132491

8. A DDRESS OFFER TO (If Other Than Item 7)

FA X:TEL: TEL: FAX:

W90VN824R0061 26

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FA CILITY CODE

17. The of feror agrees to perf orm the work required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this of fer is accepted by the Government in w r iting w ithin ________ calendar days after the date of fers are due.

the minimum requirements stated in Item 13D . Failure to insert any numb er means the offeror accepts the minimum in Item 13D.)

A MOUNTS SEE SCHEDULE OF PRICES

18. The of feror agrees to f urnish any required perf ormance and payment bonds.

19. A CKNOWLEDGMENT OF AMENDMENTS

(The o fferor acknowledges receipt o f amendments to the so lic itation -- give number and date of each)

A MENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON A UTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS A CCEPTED:

22. AMOUNT 23. ACCOUNTING A ND APPROPRIA TION DATA

24. SUBMIT INVOICES TO A DDRESS SHOWN IN ITEM

(4 c opies unless otherwis e speci fied)

CODE

(Insert any number equal to or greater than

20C. OFFER DA TE

25. OTHER THAN FULL A ND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MA DE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME A ND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTA NCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor i s not required to sign this document.)

document and retu rn _______ c opies to iss uing office.) Contrac tor agrees Y our of fer on th is s olicita tion, is hereby acc epted as to the item s li sted. This award con-to f urnish and del iv er a ll i tems or perform al l work , requ isi tions identi fied s umm ates the c ontract, which c ons ists of (a) the Gov ernm ent s olicita tion and on this form and any continuation sheets for the c ons ideration sta ted in this y our of f er, and (b) this c ontract award. No f urther con tractual document is contrac t. The rights and obligations o f the parties to thi s contrac t shall be necessary .

gov erned by (a) this contract award, (b) the s oli citation, and (c) the clauses, representations , certi fications , and specif ic ations or inc orporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRA CTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF A MERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER W ILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contrac tor is required to sign th is28. NEGOTIATED AGREEMENT

(M ust be ful l y completed by offer or )OFFER

W90VN824R0061

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Job

K WORK

FFP

K WORK

FOB: Destination

PURCHASE REQUEST NUMBER: 0012160112

PSC CD: 5680

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Job

L WORK

FFP

L WORK

FOB: Destination

PURCHASE REQUEST NUMBER: 0012160112

PSC CD: 5680

NET AMT

Section C - Descriptions and Specifications

SPECIFICATIONS

DEPARTMENT OF THE ARMY

US ARMY INSTALLATION MANAGEMENT COMMAND

HEADQUARTERS, UNITED STATES ARMY GARRISON, YONGSAN-CASEY

UNIT #15543

APO AP 96224-5543

AMIM-YNP-G 9 July 2024

SPECIFICATIONS

FOR

PROJECT NO.: 132491

Repair Quonset Hut Building S-1709

Camp Casey, Korea

TABLE OF CONTENTS

1. Technical Provisions - I: Statement of Work

2. Technical Provisions - II: Technical Detail Specifications

3. Technical Provisions - III: Special Conditions

4. Appendix "A": List of Applicable Contract Drawings

TECHNICAL PROVISIONS - I

STATEMENT OF WORK

PROJECT NO TITLE LOCATION

132491 Repair Quonset Hut Building S-1709 Camp Casey

1. DESCRIPTION: The work to be performed to repair Quonset hut building S-1709 is described below and executed by one or more of the groups.

1.1. Work by Contractor: The contractor shall provide all labor, tools, equipment, supplies and any other resources necessary to accomplish the scope of work contained herein as indicated in the drawings and in accordance with the specifications.

1.2. Work by In-House Labor: Not applicable to this project.

1.3. Work by Troop Labor: Not applicable to this project.

2. PRINCIPAL FEATURES: This project includes the following principal features:

2.1. Schedule #I, Repair (K): All work shall be in accordance with the attached drawings and specifications.

2.1.1. Civil Work

2.1.1.1. Replace 0.6m width steel grating ditch.

2.1.1.2. Replace concrete sidewalk.

2.1.1.3. Replace granite/concrete curb.

2.1.1.4. Replace stone wall with average 06m H high land free standing wall.

2.1.1.5. Plant rhododendron indicum and cherry blossom tree.

2.1.1.6. Restore AC pavement.

2.1.1.7. Replace six (6) surface inlet (0.5x0.5m) with 150mm DIA PVC drainpipe.

2.1.1.8. Paint 150mm thickness reflective white.

2.1.1.9. Replace 100mm THK gravel on 4mm THK non-woven fabric.

2.1.1.10. Restore solid sodding with topsoil.

2.1.1.11. Replace 150mm PVC sewer line with One (1) surface cleanout.

2.1.1.12. Replace two (2) concrete encasement on sewer line.

2.1.1.13. Replace water lines and gate valves with necessary accessories.

2.1.2. Architectural Work

TP I-1

2.1.2.1. Floor work

2.1.2.1.1. Replace deteriorated existing floor tile with new Polyvinyl Chloride Tile (PVCT) including Vinyl Cove Base (VCB) as shown on new floor plan and interior finish schedule.

The existing concrete flooring shall be smooth, true, level plane with all defects such as rough or scaling concrete, low spots, high spots, painting, and uneven surface shall be corrected for new flooring. Provide leveling concrete for existing concrete slab if needed.

2.1.2.1.2. Replace deteriorated existing FCT with new including cement bond coat, waterproof membrane, mortar bed as shown on floor plans, sections and detail drawings.

2.1.2.1.3. Apply epoxy coating with non-slip grits on exist floors as shown on floor plan, and interior finish schedule.

2.1.2.1.4. Replace deteriorated existing concrete stoops with new as shown on floor plan.

2.1.2.1.5. Replace deteriorated existing granite stone tile with new including mortar bed as shown on floor plans, detail drawing and finish schedule.

2.1.2.2. Interior and exterior wall work

2.1.2.2.1. Replace existing all GWB wall board walls with new GWB wall (Normal, water resistant or 'X' type) including metal studs as shown on floor plans, sections, and detail drawings.

2.1.2.2.2. Paint on all existing interior walls including as shown on floor plan, detail drawings interior finish schedule.

2.1.2.2.3. Replace deteriorated existing Glazed Ceramic Wall Tile (GCWT) with new including cement bond coats, waterproof membrane, plastering with metal lath and waterproof GWB as shown on floor plans and section.

2.1.2.2.4. Replace existing exterior walls with new EIFS and face bricks as shown on floor plan, elevations, sections and detail drawings.

2.1.2.2.5. Replace deteriorated existing wall with new wooden panel as shown on floor plan and interior finish schedule.

2.1.2.2.6. Replace deteriorated existing wall with new MCP (Marble Composition Panel) at VEST-1 as shown on floor plan and interior finish schedule.

2.1.2.2.7. Replace deteriorated existing wall with glass block at VEST-1 as shown on floor plan, elevation and interior finish schedule.

2.1.2.2.8. Apply skim coat plaster on concrete wall as shown on floor plan, sections and finish schedule.

2.1.2.3. Interior and exterior ceiling and roof work

2.1.2.3.1. Replace deteriorated existing ceiling with new acoustical ceiling tiles including metal suspension systems as shown on floor plans and interior finish schedule.

2.1.2.3.2. Replace deteriorated existing ceiling with new GWB (Normal, water resistant or

TP I-2

'X' type) ceiling including ceiling suspension system as shown on floor plans and finish schedule.

2.1.2.3.3. Paint on all interior ceiling surfaces as shown on interior finish schedule and section.

2.1.2.3.4. Replace deteriorated existing roof with new standing seam metal roof including insulation and accessories as shown on floor plan, roof plan, elevations and details.

2.1.2.3.5. Replace deteriorated metal canopy with new as shown on floor plans, elevations, and detail drawing.

2.1.2.3.6. Replace deteriorated existing rain gutters, downspouts and concrete splash blocks with new as shown on floor plans, elevations, sections and detail drawings.

2.1.2.4. Miscellaneous work

2.1.2.4.1. Replace deteriorated existing doors and door frames with new including new hardware sets as shown on new floor plan and door schedule.

2.1.2.4.2. Replace deteriorated existing window including insect screen with new aluminum thermal breaker type windows including glass as shown on floor plans, elevations, and window schedule.

2.1.2.4.3. Replace deteriorated existing window horizonal mini blinds with new, fireproof type.

2.1.2.4.4. Replace deteriorated existing wooden head, jam and sill for all windows with new as shown on door/window schedule (Natural color, oak).

2.1.2.4.5. Replace deteriorated existing aluminum louver with new as shown on floor plans and louver schedule.

2.1.2.4.6. Replace deteriorated existing Fire Extinguisher Cabinets (FEC) with new as shown on new floor plan and detail drawing.

2.1.2.4.7. Replace existing all toilet accessories with new as shown on floor plans and detail drawings.

2.1.2.4.8. Replace interior and exterior signages with new as shown on floor plan, elevation and signage schedule.

2.1.2.4.9. Replace deteriorated existing metal shelf with mop rack with new in janitor room.

2.1.2.4.10. Replace deteriorated existing AL grating with new at main entrance as shown on floor plan and detail drawing.

2.1.2.4.11. Replace deteriorated existing bulletin board with new as shown on floor plan, detail drawing and signage schedule.

2.1.2.4.12. Replace deteriorated existing lavatory cabinet and kitchen cabinet with new including base cabinets and upper cabinets as shown on floor plan, interior elevation and detail drawing.

2.1.2.4.13. Replace deteriorated existing wooden wall rail and wooden base board with new as shown on floor plans, interior elevations, sections and detail drawings.

2.1.2.4.14. Replace deteriorated existing projection screen and projector mount with new as shown on floor plans, detail drawings and interior finish schedule.

TP I-3

2.1.2.4.15. Replace deteriorated access doors with new on wall & ceiling as required.

2.1.2.4.16. Provide 3 sets renderings (size: 760mm x 500mm) and image file for exterior building S-1709, Camp Casey.

2.1.2.4.17. Remove existing ACM as below in the building S-1709, Camp Casey.

- Transit board (mech room) – 20 SF

- Air sampling (work area)

- Final air sampling

- ECON unit

- ACM transportation & disposal (1 ton truck)

- MOB/ demobilization

2.1.3. Mechanical Work

2.1.3.1. Repair the heating and cooling system by installing new split heat pump system, electric wall heater, split air conditioning unit, electric unit heater, valves, piping, insulations, controls, equipment support (concrete pad), and all associated accessories for HVAC system as shown on drawings.

2.1.3.2. Repair the ventilation system by installing new energy recovery ventilator, exhaust fans, controls, diffusers, resister, ducts, insulations, outside air intake louver with bird screen, motorized damper and all associated accessories for ventilation system as shown on drawings.

2.1.3.3. Repair the plumbing system by installing new electric domestic hot water heater, electric water cooler, domestic hot water recirc, pump, domestic cold and hot water piping system, insulation, sewer and vent piping system, water hammer arresters, floor drain, floor clean out, including plumbing fixtures, and all associate accessories as shown on drawing.

2.1.4. Electrical Work

2.1.4.1. Replace existing interior/exterior lightings, fixtures, exit lights, toggle switches, 3-way switches, lighting contactor with photocell, wires and conduits with new.

2.1.4.2. Replace existing watthour meter and current transformer, panelboards, receptacles with cover plates associated wiring and conduits with new.

2.1.4.3. Replace existing safety switches, motor controllers, junction boxes, control/power wires and conduits for mechanical systems with new.

2.1.4.4. Replace existing fire alarm control system with new addressable fire alarm control and mass notification system panel, manual pull station, smoke detector and relay module, antenna, visual/signal strobes (15 or 75 candela), microphone, speaker (wattage as required) device, fire alarm building transmitter, lighting arrester and associated wiring and conduit.

2.1.4.5. Replace existing telecommunication system including telephone terminal board, telephone/data outlets with cover plates, terminal blocks, equipment rack, and associated wire and conduit with new.

TP I-4

2.1.4.6. Replace existing CATV distribution cabinet, pull boxes, CATV outlets and associated wiring and conduit with new.

2.1.4.7. Replace existing exterior underground telecommunication line and associated accessories as shown on the drawings.

2.1.4.8. Replace existing exterior power distribution system with new including pad mounted transformer, primary concrete pole, manhole, primary, secondary line and associated accessories, wiring and conduit as shown on the drawings.

2.1.5. Structure Work

2.1.5.1. Repair by replacing existing concrete slab.

2.1.5.2. Repair by replacing existing concrete stoop.

2.1.5.3. Repair by replacing existing wall with 200 THK concrete wall and foundation.

2.1.5.4. Repair by replacing existing roof with steel column and beam.

2.1.5.5. Submit structure design analysis and shop drawing.

2.2. Schedule #II, New Construction (L): All work shall be in accordance with the attached drawings and specifications.

2.2.1. Civil Work

2.2.1.1. Construct one (1) pavilion.

2.2.1.2. Construct 1.0m W foot notes pavement.

2.2.1.3. Construct 150mm THK concrete pad.

TP I-5

TECHNICAL PROVISIONS - II

TECHNICAL DETAIL SPECIFICATIONS

GENERAL: The specification sections listed below are applicable to this project. The specifications are from the “Standard Technical Specifications for O&MA Projects, Korea, Revision 1” (2014 OMA SPECS, REVISION 1), dated 20151030, located on the http://www.usfk.mil/Portals/105/Documents/Contracting/NewContract/2014-OMA-SPECS_REVISION- 1.pdf. The electronic version of the specifications is Acrobat® PDF format and can be read with the Acrobat Reader® software.

The Standard Technical Detail Specifications:

The work shall conform to the most current version of the listed standards/specifications below.

DIVISION 01 – GENERAL REQUIREMENTS

01 30 00 ADMINISTRATIVE REQUIREMENTS

01 32 01.00 10 PROJECT SCHEDULE

01 33 00 SUBMITTAL PROCEDURES

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 33 29 LEED(TM) DOCUMENTATION

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 35 29.13 HEALTH, SAFETY, AND EMERGENCY RESPONSE PROCEDURES

FOR CONTAMINATED SITES

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.00 10 QUALITY CONTROL

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 57 20.00 10 ENVIRONMENTAL PROTECTION

01 58 00 PROJECT IDENTIFICATION

01 74 19 CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT

01 78 00 CLOSEOUT SUBMITTALS

01 78 23 OPERATION AND MAINTENANCE DATA

TP II-1

DIVISION 02 - EXISTING CONDITIONS

02 41 00 DEMOLITION AND DECONSTRUCTION

02 61 13 EXCAVATION AND HANDLING OF CONTAMINATED

MATERIAL

02 65 00 UNDERGROUND STORAGE TANK REMOVAL

02 81 00 TRANSPORTATION AND DISPOSAL OF HAZARDOUS

MATERIALS

02 82 14.00 10 ASBESTOS HAZARD CONTROL ACTIVITIES

02 83 19.00 10 LEAD BASED PAINT HAZARD ABATEMENT, TARGET

HOUSING & CHILD OCCUPIED FACILITIES

DIVISION 03 – CONCRETE

03 11 13.00 10 STRUCTURAL CAST-IN-PLACE CONCRETE FORMING

03 20 00.00 10 CONCRETE REINFORCING

03 15 00.00 10 CONCRETE ACCESSORIES

03 30 00 CAST-IN-PLACE CONCRETE

03 30 53 MISCELLANEOUS CAST-IN-PLACE CONCRETE

DIVISION 04 - MASONRY

04 20 00 MASONRY

DIVISION 05 – METALS

05 05 23 WELDING, STRUCTURAL

05 12 00 STRUCTURAL STEEL

05 21 23 STEEL JOIST GIRDER FRAMING

05 30 00 STEEL DECKS

05 50 14 STRUCTURAL METAL

FABRICATIONS

05 51 00 METAL STAIRS

05 51 33 METAL LADDERS

05 52 00 METAL RAILINGS

05 50 13 MISCELLANEOUS METAL FABRICATIONS

05 52 00 METAL RAILINGS

DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES

06 10 00 ROUGH CARPENTRY

06 20 00 FINISH CARPENTRY

TP II-2

DIVISION 07 - THERMAL AND MOISTURE PROTECTION

07 21 16 MINERAL FIBER BLANKET INSULATION

07 24 00 EXTERIOR INSULATION AND FINISH SYSTEMS

07 41 13 METAL ROOF PANELS

07 60 00 FLASHING AND SHEET METAL

07 61 14.00 20 STEEL STANDING SEAM ROOFING

07 84 00 FIRESTOPPING

07 92 00 JOINT SEALANTS

DIVISION 08 - OPENINGS

08 11 13 STEEL DOORS AND FRAMES

08 11 16 ALUMINUM DOORS AND FRAMES

08 14 00 WOOD DOORS

08 51 13 ALUMINUM WINDOWS

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

08 87 16 FRAGMENT RETENTION FILM FOR GLASS

DIVISION 09 - FINISHES

09 22 36 LATH

09 24 23 STUCCO

09 29 00 GYPSUM BOARD

09 30 00 CERAMIC TILE, QUARRY TILE, AND PAVER TILE

09 51 00 ACOUSTICAL CEILINGS

09 65 00 RESILIENT FLOORING

09 90 00 PAINTS AND COATINGS

DIVISION 10 - SPECIALTIES

10 14 01 EXTERIOR SIGNAGE

10 14 02 INTERIOR SIGNAGE

10 21 13 TOILET COMPARTMENTS

10 28 13 TOILET ACCESSORIES

DIVISION 12 – FURNISHINGS

TP II-3

12 21 00 WINDOW BLINDS

12 32 00 MANUFACTURED WOOD CASEWORK

12 36 00 COUNTERTOPS

DIVISION 22 - PLUMBING

22 00 00 PLUMBING, GENERAL PURPOSE

DIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING

23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS

23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC

23 07 00 THERMAL INSULATION FOR MECHANICAL SYSTEMS

23 09 53.00 20 SPACE TEMPERATURE CONTROL SYSTEMS

23 52 00 HEATING BOILERS

23 64 26 CHILLED, CHILLED-HOT, AND CONDENSER WATER PIPING SYSTEMS

23 82 02.00 10 UNITARY HEATING AND COOLING EQUIPMENT

DIVISION 26 – ELECTRICAL

26 00 00.00 20 BASIC ELECTRICAL MATERIALS AND METHODS

26 08 00 APPARATUS INSPECTION AND TESTING

26 20 00 INTERIOR DISTRIBUTION SYSTEM

26 41 00 LIGHTNING PROTECTION SYSTEM

26 51 00 INTERIOR LIGHTING

26 56 00 EXTERIOR LIGHTING

DIVISION 27 – COMMUNICATIONS

27 10 00 BUILDING TELECOMMUNICATIONS CABLING SYSTEM

27 54 00.00 20 COMMUNITY ANTENNA TELEVISION (CATV) SYSTEMS

DIVISION 28 - ELECTRONIC SAFETY AND SECURITY

28 31 33.00 10 FIRE ALARM REPORTING SYSTEM, RADIO TYPE

28 31 64.00 10 FIRE DETECTION AND ALARM SYSTEM, ADDRESSABLE

28 31 76 INTERIOR FIRE ALARM AND MASS NOTIFICATION SYSTEM

DIVISION 31 – EARTHWORK

TP II-4

31 00 00 EARTHWORK

DIVISION 32 - EXTERIOR IMPROVEMENTS

32 01 16.17 COLD MILLING OF BITUMINOUS PAVEMENTS

32 11 16 SUBBASES FOR FLEXIBLE PAVING

32 11 23 AGGREGATE AND/OR GRADED-CRUSHED AGGREGATE BASE

COURSE

32 11 24 GRADED CRUSHED AGGREGATE BASE COURSE FOR

PERVIOUS PAVEMENT

32 12 10 BITUMINOUS TACK AND PRIME COATS

32 12 11 BITUMINOUS SURFACE TREATMENT

32 12 15.13 HOT-MIX ASPHALT AIRFIELD PAVING

32 12 16 HOT-MIX ASPHALT (HMA) FOR ROADS

32 17 24.00 10 PAVEMENT MARKINGS

32 92 23 EXTERIOR PLANTS

32 92 23 SODDING

DIVISION33 – UTILITIES

33 70 02.00 10 ELECTRICAL DISTRIBUTION SYSTEM, UNDERGROUND

TP II-5

TECHNICAL PROVISIONS - III

SPECIAL CONDITIONS

1. Material Approval Submittal:

(1) The contractor shall submit a shop drawing submittal schedule and the material approval request with all supporting documents to the COR within 7 days after receipt of NTP.

(2) The Contractor shall process submittals in accordance with Section 013300 – SUBMITTAL

PROCEDURES

2. Extended warranty - FAR 52.246-21

2.1. Extended warranty list

L/N Warranty Item Description Warranty

Period (Yrs) Certification

(Yes / No) Warranty Tag

(Yes / No) Repair Time after call

1 Metal roof panel Installer 10 N N 24 Hrs

2 LED light Product 10 Y Y 7 Days

3 Split air conditioning Product 3 Y Y 24 Hrs

4 Heat Pump system Product 3 Y Y 24 Hrs

5 Energy Recovery Ventilation Unit Product 3 Y Y 24 Hrs

2.2. Contractor shall submit to COR the Warranty Certification with 4025 for the listed items.

2.3. Contractor shall submit to COR Warranty management plan and approve it before 30 days of pre-warranty conference. (OMA Sec 01 78 00)

2.4. Contractor shall have the Pre-Warranty Conference before Contract Close Date. (OMA Sec 01 78)

2.5. Warranty Information and Data

2.5.1. Contractor shall submit Warranty tag design, COR shall review and approve it for the listed and shall install it for the listed items. (OMA Sec 01 78 00)

2.5.2. Submit the O&M Manual with Manufacture’s instruction for DPW training. (OMA Sec 01 78 00)

TP III-1

3. The contractor shall have personnel on site for the fire alarm work upon Government's direction, who are certified by the National Institute for Certification in Engineering Technologies (NICET) Level III or equivalent. Equivalent Certificate in Korea is the following which is issued by the Human Resource Development Service of Korea. If the contractor doesn’t have personnel who are certified by NICET, the contractor shall have two personnel who are certified for (1) and the other (2) below.

(1) Engineer Fire Fighting Facilities - Electrical (소방설비기사 -전기)

(2) Engineer Fire Fighting Facilities – Mechanical (소방설비기사 -기계)

4. Environmental Requirements in Contract

The Contractor shall perform work consistent with the relevant policy and objectives identified in Installation’s Environmental Management System (EMS). The Contractor shall perform work in a manner that conforms to all appropriate Environmental Management Programs and Operational Controls identified by Installation’s EMS, including pollution prevention, waste reduction, energy use, and natural resource protection. The Contractor shall provide monitoring and measurement information as necessary for the organization to address environmental performance relative to the environmental, energy, and transportation management goals. In addition, the Contractor shall advise their employees of their roles and responsibilities identified by the EMS and how these requirements affect their work performed under this contract. The Contractor is responsible for ensuring that the Contractor and any persons involved in the supervision or performance of the contract complete all required Environmental training.

In the event of any environmental nonconformance or noncompliance associated with the contracted services, the contractor shall take corrective and/or preventative actions. In the event of any noncompliance with any federal, state, or local environmental law, regulation or requirement, the Contractor shall immediately respond by taking all appropriate corrective actions and notifying the Contracting Officer’s Representative (COR) and the Environmental Office. For any nonconformance with the EMS, the Contractor shall take corrective action and initiate further preventative action, as required by the Environmental Office.

All on-site contractor personnel shall complete necessary safety and environmental training specified for the type of work conducted on-site. Upon contract award, the COR will notify the EMS Manager to arrange Environmental training for appropriate staff.

Additionally, when ordering supplies for use on Installation, all contractor personnel must favor energy-efficient, recycled or reclaimed material whenever practicable.

The responsibilities of all contractor personnel include:

(1) Comply with all applicable environmental laws, regulations and installation environmental policies.

(2) Control and prevent spills or hazardous substances releases IAW installation Spill Prevention

Plan.

TP III-2

(3) Ensure dust, debris, materials, trash, etc., do not become air borne and travel off the project site.

(4) Do not remove, cut, deface, injure, or destroy land resources including trees, shrubs, vines, topsoil and land forms without approval, except in areas indicated on the drawings or specified to be cleared.

(5) Monitor all water areas affected by construction activities to prevent pollution of surface and ground waters. Do not apply toxic or hazardous chemicals to soil or vegetation unless otherwise indicated.

(6) Open burning is prohibited on the Government premises IAW installation environmental policy.

(7) Participate in installation’s recycling program.

(8) Reducing the amount of hazardous material and/or solvent used by purchasing fewer hazardous materials and by increasing the use of products with recycled content. Spills of hazardous or toxic materials must be immediately reported to the Contracting Officer and the Environmental Office.

Storage, describing, packaging, labeling, marking and placarding of hazardous waste and hazardous material IAW applicable environmental laws, regulations and local environmental policies. Transport hazardous waste off Government property and dispose of it in compliance with National, Provincial, and/or Local requirements for solid waste disposal.

(9) Reducing the amount of solid waste from construction and demolition debris, and scrap metal sent to municipal and rubble landfills by reducing, reusing, and recycling. Handling, storage, and disposal of solid waste must be conducted to prevent contamination. Transport solid waste off Government property and dispose of it in compliance with National, Provincial, and/or Local requirements for solid waste disposal.

(10) Conserving energy and water usage by turning off lights and equipment when not in use and using only the necessary amount of water needed to complete the required tasks. Continuous conservation of our natural resources is a must.

(11) When potential cultural or historic items are inadvertently found during construction activities, immediately cease activities in the vicinity of the discovery and report the findings to the Environmental Office.

(12) Participate in installation’s Integrated Pest Management (IPM) program whenever practicable.

(13) Minimize interference with disturbance to, and damage to fish, wildlife, and plants including their habitat.

TP III-3

5. CONTRACT REQUIREMENTS PACKAGE ANTITERRORISM/OPERATIONS SECURITY REVIEW

COVER SHEET

After Notice to process is issued, COR shall take following action, Section IV. Standard Contract Language/Contract Clause Applicability and/or Additional SOW Language.

A. AT Level I training. This standard language is for contractor employees with an area of performance within as Army controlled installation, facility or area. All contractor employees, including subcontractor employees, requiring access to Army installations, facilities, and controlled-access areas shall complete AT Level I awareness training within 30 calendar days after the contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer, if a COR is not assigned, within 05 calendar days after completion of training by all employees and subcontractor personnel. AT Level I awareness training is available at the following website: http://jko.jten.mil

B. Access and general protection/security policy and procedures. This standard language is for contractor employees with an area of performance within Army controlled installation, facility, or area. Contractor and all associated sub-contractors employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

B-a. For contractors that do not require CAC, but require access to a DoD facility or installation. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014- 05/AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

C. iWATCH Training. The contractor and all associated sub-contractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity ATO). This local developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 30 calendar days of contract award and within 05 calendar days of new employees commencing performance with the results reported to the COR NLT 30 calendar days after contract award.

TP III-4

D. For contracts that require OPSEC Training. Per AR 530-1 Operations Security, the contractor employees must complete Level I OPSEC Awareness training. New employees must be trained within 30 calendar days of their reporting for duty and annually thereafter.

TP III-5

Section F - Deliveries or Performance

CLAUSES INCORPORATED BY FULL TEXT

52.211-10 COMMENCEMENT, PROSECUTION, AND COMPLETION OF WORK (APR 1984)

The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than 180 days * The time stated for completion shall include final cleanup of the premises.

(End of clause)

Section J - List of Documents, Exhibits and Other Attachments

LIIST OF DOCUMENTS AND EXHIBIT

APPENDIX "A"

LIST OF APPLICABLE CONTRACT DRAWINGS

GENERAL: The work shall conform to the following contract drawings and OMA standard detail drawings, 2014 (dated 30 November 2015), issued by the Department of the Army, Installation Management Agency, Korea Region Office and located on http://www.usfk.mil/Portals/105/Documents/Contracting/NewContract/STANDARD-DETAIL-DRAWINGS- FOR-OMA-PROJECTS-KOREA_20151130.pdf, all of which form a part of the specifications.

Ring No. Sheet No. Description Date

T-1 T-2

TITLE SHEET-1

TITLE SHEET-2

9 JUL 24

CIVIL

3 C-1 LOCATION PLAN AND GENERAL NOTES 9 JUL 24

4 C-2 REMOVAL PLAN 9 JUL 24

5 C-3 SITE LAYOUT PLAN AND SCOPE OF WORK 9 JUL 24

6 C-4 UTILITIES PLAN AND SCOPE OF WORK 9 JUL 24

7 C-5 GRADING SECTION-1 9 JUL 24

8 C-6 GRADING SECTION-2 9 JUL 24

9 C-7 PAVILION DETAIL 9 JUL 24

10 C-8 FOOTNOTE PAVEMENT 9 JUL 24

C-9 C-10 C-11 C-12 C-13

S-1

S-2

S-3 S-4 S-5 S-6 S-7

TREE PLANTING DETAIL

MISC DETAILS-1

MISC DETAILS-2

MISC DETAILS-3

MISC DETAILS-4

STRUCTURE

GENERAL NOTE, DESIGN DATA AND TYPICAL

DETAILS

EXST/REMOVAL GROUND FLOOR PLAN

A-1

FOUNDATION GROUND FLOOR PLAN

ROOF FRAME PLAN

CROSS SECTION

BEAM, COLUMN, WALL & FOUNDATION SCHEDULE

DETAILS

9 JUL 24

9 JUL 24

9 JUL 24

ARCHITECTURAL

23 A-1 GENERAL NOTES, SCOPE OF WORK AND ACM NOTE 9 JUL 24

24 A-2 EXISTING FLOOR PLAN AND LEGEND 9 JUL 24

25 A-3 NEW GROUND FLOOR PLAN AND LEGEND 9 JUL 24

26 A-4 NEW ROOF PLAN 9 JUL 24

27 A-5 ELEVATION-1 AND 2 9 JUL 24

A-6 A-7 A-8

A-9

A-10 A-11 A-12 A-13 A-14 A-15 A-16 A-17 A-18 A-19 A-20 A-21

A-22 A-23

A-24 A-25

ELEVATION-3 AND 4

GENERAL SECTIONS

ENLARGED NEW GROUND FLOOR PLAN AND

LEGEND

ENLARGED PARTIAL FLOOR FLAN @TOILETS &

INTERIOR ELEVATIONS-1

INTERIOR ELEVATIONS-2

INTERIOR ELEVATIONS-3

EXTERIOR WALL SECTIONS & DETAILS

INTERIOR WALL SECTION-1

INTERIOR WALL SECTION-2

ROOF DETAILS

CABINET DETAILS

MISC DETAILS-1

MISC DETAILS-2

MISC DETAILS-3

MISC DETAILS-4

INTERIOR, EXTERIOR FINISH SCHEDULE & FINISH

SCHEDULE NOTE

MATERIAL & COLOR SCHEDULE

DOOR/WINDOW SCHEDULE, ELEVATIONS AND

DETAILS

HARDWARE SCHEDULE & DOOR/WINDOW NOTE

SIGNAGE PLAN, SCHEDULE & DETAILS

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

9 JUL 24

MECHANICAL

M-1 MECHANICAL MATERIAL INDICATIONS & SYMBOLS

A-2

49 M-2 MECHANICAL GENERAL NOTE AND SCOPE OF

WORK

9 JUL 24

50 M-3 MECHANICAL EQUIPMENT SCHEDULE-1 9 JUL 24

51 M-4 MECHANICAL EQUIPMENT SCHEDULE - 2 9 JUL 24

52 M-5 EXISTING AND REMOVAL GROUND FLOOR PLAN 9 JUL 24

53 M-6 NEW GROUND FL HVAC PIPING FLAN, AND NOTES 9 JUL 24

54 M-7 NEW GROUND FL HVAC DUCT PLAN-1, AIR DEVICE

SCHEDULE AND NOTES

55 M-8 HVAC PIPE FLOW DIAGRAM, HVAC CONTROL LOW

DIAGRAM AND ERV CONTROL DIAGRAM

9 JUL 24

56 M-9 CONTROLS 9 JUL 24

57 M-10 NEW GROUND FL PLUMBING PIPING PLAN-1,

PLUMBING FIXTURE SCH, WATER HAMMER

ARRESTER SCH, AND NOTES

9 JUL 24

58 M-11 NEW MECH RM & TOILET PLUMBING PIPING PARTIAL

PLAN-2, PLUMBING FIXTURE SCH., WATER HAMMER

ARRESTER SCH. AND NOTES

9 JUL 24

59 M-12 DETAILS-1 9 JUL 24

60 M-13 DETAILS-2 9 JUL 24

61 M-14 DETAILS-2 9 JUL 24

62 M-15 DETAILS-4

ELECTRICAL

63 E-1 LEGEND, GENERAL NOTES AND SCOPE OF WORKS 9 JUL 24

64 E-2 NEW GROUND FLOOR LIGHTING PLAN 9 JUL 24

65 E-3 LIGHTING FIXTURE DETAILS 9 JUL 24

66 E-4 LIGHTING FIXTURE SCHEDULE 9 JUL 24

67 E-5 NEW GROUND FL POWER PLAN 9 JUL 24

68 E-6 NEW GROUND FLPOER/CONTROL PLAN FOR

MECHANICAL SYSTEM

9 JUL 24

69 E-7 NEW GROUND FLOOR FIRE ALARM/MASS

NOTIFICATION SYSTEM

9 JUL 24

70 E-8 NEW FIRE ALARM/MASS NOTIFICATION DIAGRAM 9 JUL 24

71 E-9 NEW GROUND FLOOR LAN/TEL PLAN 9 JUL 24

72 E-10 NEW LAN/TEL SYSTEM DIAGRAM 9 JUL 24

73 E-11 NEW GROUND FL CATV PLAN 9 JUL 24

74 E-12 NEW CATV SYSTEM DIAGRAM 9 JUL 24

E-13 E-14 E-15

E-16

NEW POWER ONE-LINE DIAGRAM & NEW PANEL

BOARD “MDP” LOAD SCHEDULE

EXIST/NEW EXTERIOR TELECOMMUNICATION LINE

DISTRIBUTION PLAN

REMOVAL/EXIST/NEW EXTERIOR ELECTRIAL

DISTRIBUTION PLAN

9 JUL 24

9 JUL 24

A-3

Section K - Representations, Certifications and Other Statements of Offerors

CLAUSES INCORPORATED BY REFERENCE

52.203-2 Certificate Of Independent Price Determination APR 1985 252.209-7999 Representation by Corporations Regarding and Unpaid

Deliquent Tax Liability or a Felony Conviction under any Federal Law

FEB 2012

ATTACHMENT: CONTRACTOR’S TAX EXEMPTION DECLARATION

(1) References:

(i) Contract clause, "FAR 52.229-06 Taxes—Foreign Fixed-Price Contracts (Jan 1991)."

(ii) US-ROK Status of Forces Agreement (SOFA), Articles IX and XVI.

(iii) ROK Customs Law, Law No. 1976, promulgated on 29 November 1967, as amended.

(iv) ROK Value Added Tax Law, Law No. 2934, promulgated on 22 December 1976 (effective date 1 July 1977), as amended.

(v) ROK Special Excise Tax Law, Law No. 2935, promulgated on 22 December 1976 (effective date 1 July 1977), as amended.

(2) Contractor shall state the types and estimated amount of taxes that would normally apply to such transactions but are excluded from this proposal.

(i) Customs Tax (except for ROK MND-funded contracts or delivery orders):

Name Number Cost/Unit of Item of Units w/o Tax % of Tax Tax/Unit Tax Total

This item will be imported specifically for this contract? Yes _________ No ________

(ii) Special Excise Tax:

Name Number Cost/Unit of Item of Units w/o Tax % of Tax Tax/Unit Tax Total

Name of item manufacturer

(iii) Value Added Tax (VAT):

Input VAT on materials purchased for this contract. _________ Input VAT on transportation leased/rented for this contract. _________ Input VAT on equipment leased/rented for this contract. _________ Input VAT on services purchased for this contract. _________ Output VAT on total contract amount. _________

(iv) Special Excise (Petroleum) Tax:

No. of Unit Price Total Tax Liters w/o Tax Tax/Unit Amount

Regular Gasoline __________ (L) ₩_________ ₩________ ₩_________

Premium Gasoline __________ (L) ₩_________ ₩________ ₩_________

Diesel __________ (L) ₩_________ ₩________ ₩_________

Other __________ (L) ₩_________ ₩________ ₩_________

(3) Name of Oil Company Refinery from which POL products will be purchased:

Oil Company: _________________________________________ (Name only)

(4) I certify by this submission that all supplies and services to be purchased for this contract have been proposed exclusive of Value Added Tax, applicable Customs Tax (except for ROK MND-funded contracts and delivery orders), and Special Excise Tax.

Contractor’s Signature

Section L - Instructions, Conditions and Notices to Bidders

GENERAL INSTRUCTIONS

GENERAL INSTRUCTIONS FOR PREPARATION OF PROPOSAL

1. The Government intends to award without discussion, but reserves the right to conduct discussions if deemed necessary and to establish a competitive range for efficiency in accordance with FAR 52.215- 1(f)(4).

2. Offeror(s) may, at the discretion of the Government, be asked to provide more information and clarification regarding their proposals. The Government may make a final determination as to whether an offer is acceptable or unacceptable solely based on the proposals as submitted, without requesting any further information. However, if it is deemed necessary the Government may, at its sole discretion, request additional information clarifying but not substantially changing any proposal as submitted.

SUBMISSION OF PROPOSAL

The offeror shall email offer to the contract specialist MAJ Duvaldadrian, Alexander (email address :

Alexander.c.duvaldadrian.mil@army.mil ) and contracting officer Mr. Kim, Chong Nak (email address:

chongnak.kim.ln@army.mil ) by the Korea local closing time and date which can be found in Block 13 on page 1 of this solicitation. After submission of the offer, the offeror shall send an additional email shall to the contract specialist to verify if offer is received. It is the offeror responsibility to verify receipt of offer from contract specialist before the Korea local closing time and date. All questions should be emailed to alexander.c.duvaldadrian.mil@army.mil and chongnak.kim.ln@army.mil within seven (7) calendar days after the solicitation is issued.

CLOSING DATE: The electronic offer shall be submitted by 1100 hrs on the closing date of RFP.

SUBMISSION REQUIREMENTS

A. PRICING PROPOSAL: The pricing proposal must clearly indicate prices for each Contract Line Item Number in Section B - Supplies or Services and Prices.

B. DETAILED OFFER BREAKDOWN: The detailed offer breakdown must clearly identify all costs that can materially impact the statement of work. Offeror shall provide one (1) original offer breakdown with price and one (1) redacted version. The redacted version should be free of price, model numbers, any organizational logos that identifies your organization personal names, emails, and phone numbers.

C. SECTION K-ATTACHMENT FOR TAXES: Offerors must complete all tax portions of SECTION K. The offeror shall review all expenses to ensure that all applicable taxes are excluded from the overall price. In addition, offerors shall propose exemptions of specific ROK taxes that are legitimate, attributable to the contract, and authorized by the applicable stated references.

D. SECTION K-OTHER: Offerors must complete all Non-Tax related portions of SECTION K.

E. COMPLIANCE WITH SOLICITATION: Failure to submit the above requirements under SECTION L may be grounds for determining the proposal to be non-compliant. For example, if a detailed offer breakdown is not submitted, the contracting officer will be unable to find the offeror's pricing proposal acceptable and the offeror's be ineligible for award. Noncompliance will only be cured if the government holds discussions as detailed in SECTION L.

52.236-27 SITE VISIT (CONSTRUCTION) (FEB 1995)

(a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions Affecting the Work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed.

(b) An organized site visit has been scheduled for-- Date: 6 AUG 2024 Time: 0900 Korea Standard Time POC: Mr. So, Ki Chong

DSN: 315 722-4535

(c) Participants will meet at Location: Rm#424, 4FL, S-2409, Casey

(d) Escort : Any Contractor who needs escort shall bring Korea identification card , passport or driver license (주민등록증, 여권 혹은 운전면허증) and contact to Mr. So, Ki Chong

(e) Interested participants shall email the following information to COR, Mr. So, Ki Chong (kichong.so1.ln@army.mil 722-4355) NLT 1200 hours, 5 AUG 2024.

* Company Name & Name of Site Visit attendees

Government does not receive any information from interested site visit participants, the Government will cancel the Site Visit without notice.

(End of provision)

Section M - Evaluation Factors for Award

EVALUATION FACTORS

EVALUATION FACTORS FOR AWARD

Electronic offers submitted by 1100 hours on the closing date of RFP shall be considered timely.

1. EVALUATION CRITERIA

a. The pricing proposal shall be evaluated to determine whether it is complete and reasonable. A complete and reasonable pricing proposal will be deemed acceptable.

b. The detailed offer breakdown will be used by the contracting officer to determine whether proposed prices are complete and reasonable. A detailed offer breakdown may be used by the contracting officer to determine whether an offeror is able to complete the requirements under the contract, and/or whether discussions will be conducted pursuant to instructions to the offerors.

c. SECTION K - Representations, Certifications and Other Statements of Offerors

d. SECTION K-TAXES will be evaluated to determine whether it is complete. In addition, propose exemptions of specific ROK taxes will be evaluated to determine whether they are legitimate, attributable to the contract, authorized, and reasonable. A complete SECTION-K that only proposes exemptions of specific ROK taxes that are legitimate, attributable to the contract, necessary to complete the Task Order, do not improperly overstate any proposed tax exemption, authorized, and reasonable will be deemed acceptable.

e. SECTION K-OTHER will be evaluated to determine whether it is complete. A complete SECTION KOTHER will be deemed acceptable.

2. BASIS FOR AWARD:

Award shall be made to the responsible offeror submitting the lowest priced offer that is evaluated as acceptable for all evaluation criteria.