98-19782A001.pdf

This is an AutoCAD wiring harness technical drawing for an engine system operating at 60 Hz. The document is drawing number 98-19782, revision A, prepared by Cory H. Goetz and maintained by the DOD Project Manager for Expeditionary Energy & Sustainment Systems at Fort Belvoir, Virginia. The drawing is distributed statement A, approved for public release with unlimited distribution.

The drawing specifies a complete wiring harness assembly for a 60 Hz engine with detailed component identification, wire routing, and connection specifications. It includes comprehensive notes on interpretation standards (ASME Y14.100), heat stamp connector identification procedures per MIL-STD-130, part identification requirements per MIL-H-6903, and harness layout specifications. Wire specifications detail marking requirements per MIL-M-80503 at 3.00-inch intervals, bundle strapping requirements using nylon straps at maximum 3.00-inch spacing, and tolerances for wire lengths. The document contains extensive wire list tables identifying 89 individual wires with specifications including wire reference numbers, marking codes, terminal connections, wire gauges, colors (predominantly red and black), and lengths ranging from 2 inches to 84 inches. Terminal connections are designated with alphanumeric codes (K-series, P-series, M-series, TB-series) representing various connector bodies and receptacles. The drawing includes three detailed views (View A, View B, and View C) showing connector body configurations, connector pin assignments, and spatial relationships of harness routing with precise dimensional callouts in inches.