98-19780-001.pdf

This is an AutoCAD engineering drawing for a wiring harness and control box rated for 60 Hz operation. The document is identified as drawing 98-19780, sheet 1 of 4, with a distribution statement approved for public release and unlimited distribution. The drawing is maintained by the design activity, with changes to be incorporated through the CAD system.

The wiring harness assembly includes detailed schematics and a comprehensive wire list table specifying 86 wires with their reference numbers, wire markings, terminal connections, wire gauges, and lengths. Key specifications include heat stamped connector identification per military standards (MIL-STD-130), part identification in accordance with MIL-STD-130, single-line schematic harness layouts for construction purposes, wire marking with appropriate color coding and identification at 3.00-inch maximum intervals, strap wire bundles with tie-down straps at 3.00-inch maximum spacing, terminal insulation stripped to 0.25 inches and tinned with solder per manufacturer standards, and specific tolerances for wire lengths. Installed crimped connections must withstand an 8-pound axial load with continuity and no damage upon arcing. The drawing references wiring diagram DWG No. 98-19525 and includes vendor item specifications. The document is issued for an experiment, engineering development, research, and development system and was created on February 9, 2023.