98-19525J001.pdf

This is a wiring diagram for a 3KW, 60 Hz generator set. The document consists of four detailed schematic pages illustrating the electrical control and power systems for mobile electric power generation equipment.

The diagram depicts the complete wiring architecture including the control panel view with open panel design, wiring contactors, engine and fuel systems, AC circuit interrupter, fan cord configurations, power converter modules, and output panel connections. Key components shown are the governor control, fault lock-out systems, auxiliary fuel systems, starter cut-out mechanisms, and the malfunction group. The schematic identifies specific wire gauges, connector pin assignments, and component reference designations throughout the system. Notable features include an AC circuit interrupter with multiple contact points, DC control systems with voltage adjustment capability, a battery charger interface, and remote terminals for generator output (J7). The wiring diagram references ASME Y14.100 standards and includes notes regarding interpretation procedures and plastic laminate requirements. Design maintenance notes indicate that changes shall be incorporated by the design activity. The document is identified as drawing 98-19525, prepared under DOD project management for mobile electric power by M. Payne, with approval authority from the Navy and Air Force. Distribution is approved for public release with unlimited distribution.