0607A1001.pdf

PART NO. 0607A1001

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCE ON ANGLES ± 1°

2 PLACE DECIMALS ± 0.03

3 PLACE DECIMALS ±

DO NOT SCALE DRAWING

THIRD ANGLE PROJECTION

MATL ENGR MODELED BY

CONTRACT NUMBER

CONTRACTOR

DRAWN BY

CHECKER

ENGINEER QUALITY ENGINEER

ENGINEER

DATE (YEAR-MO-DA)

DRAWING APPROVAL

DESIGN APPROVAL

A

BB

A

2 1

2 1

M. ANDRINGA

M. ANDRINGA

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC

RELEASE; DISTRIBUTION IS UNLIMITED

APPLICATION

NEXT ASSY USED ON

0607A1000 B7900

REVISION HISTORY

REV DESCRIPTION DATE YY-MO-DA APPROVED

- INITIAL RELEASE 15-09-30 VEV

B7900 REAR TOOL CABINET

0607A1001

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND ARSENAL, IL 61299-7300

SCALE

SIZE

A 59678

CAGE CODE DWG NO.

DESIGN ACTIVITY

SHEETUNIT WT.NONE TBD

2015-04-29

B. VER MULM

V.VONDERA

NOTES:

1. APPLICABLE STANDARDS / SPECIFICATIONS

1. ASME Y14.100-2004

2. ASME Y14.5-2009

2. SEE SHEET 2 FOR STORAGE CABINET DETAILED

REQUIREMENTS

3. SEE SHEET 3 FOR DRAWER NUMBER AND LABELING

REQUIREMENTS.

4. FOAM LAYOUT REQUIRED TO HOLD TOOLS PER

DRAWING 0607A1000. ALL ITEMS MUST FIT WITHIN

SPECIFIED DRAWER HEIGHTS. SEE SHEET 4 FOR FOAM

LAYOUT REQUIREMENTS.

5. IDENTIFICATION OF THE SUGGESTED SOURCE(S) OF

SUPPLY HEREON IS NOT TO BE CONSTRUED AS A

GUARANTEE OF PRESENT OR CONTINUED

AVAILABILITY AS A SOURCE OF SUPPLY FOR THE

ITEM(S).

THIS DRAWING WAS NOT GENERATED FROM A SOLID MODEL.

CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.

DIMENSIONS ARE IN INCHES

TOLERANCE ON ANGLES ± 1°

2 PLACE DECIMALS ± 0.03

3 PLACE DECIMALS ±

DO NOT SCALE DRAWING

THIRD ANGLE PROJECTION

MATL ENGR MODELED BY

CONTRACT NUMBER

CONTRACTOR

DRAWN BY

CHECKER

ENGINEER QUALITY ENGINEER

ENGINEER

DATE (YEAR-MO-DA)

DRAWING APPROVAL

DESIGN APPROVAL

A

BB

A

2 1

2 1

M. ANDRINGA

M. ANDRINGA

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC

RELEASE; DISTRIBUTION IS UNLIMITED

APPLICATION

NEXT ASSY USED ON

0607A1000 B7900

REVISION HISTORY

REV DESCRIPTION DATE YY-MO-DA APPROVED

- INITIAL RELEASE 15-09-30 VEV

B7900 REAR TOOL CABINET

0607A1001

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND ARSENAL, IL 61299-7300

SCALE

SIZE

A 59678

CAGE CODE DWG NO.

DESIGN ACTIVITY

SHEETUNIT WT.NONE TBD

2015-04-29

B. VER MULM

V.VONDERA

22.50

27.50

40.25

NOTES CONTINUED:

6. COLOR: POWDER-COATED SEAFOAM GREEN, FED-

STD-595, COLOR CODE 24533

7. DRAWER 1 NOMINAL DIMENSIONS: 35.50 INCHES

WIDE, 17.50 INCHES DEEP, 3.13 INCHES TALL

8. DRAWER 2 NOMINAL DIMENSIONS: 35.50 INCHES

WIDE, 17.50 INCHES DEEP, 3.13 INCHES TALL

9. DRAWER 3 NOMINAL DIMENSIONS: 35.50 INCHES

WIDE, 17.50 INCHES DEEP, 3.13 INCHES TALL

10. DRAWER 4 NOMINAL DIMENSIONS: 35.50 INCHES

WIDE, 17.50 INCHES DEEP, 5.06 INCHES TALL

11. DRAWER 5 NOMINAL DIMENSIONS: 35.50 INCHES

WIDE, 17.50 INCHES DEEP, 5.06 INCHES TALL

12. FULL EXTENSION DRAWERS WITH SLIDERS

REQURIED.

13. REQUIRED TO SUPPORT LOADED TOOLS THROUGH

ALL TRANSPORT AND ALL TERRAIN WITHOUT

DEFORMATION OR DAMAGE.

14. DUAL HINGED LOCKING BARS REQUIRED TO

MAINTAIN DRAWER LOCATION THROUGH TRANSIT

15. HINGED LOCKING BARS TO BE SECURED THROUGH

CABLE ANCHORAGE CONNECTORS, SPRING

LOADED TO ENSURE CLOSED CONFIGURATION.

16. A DETENT SHALL MAINTAIN THE CLOSED

LOCATION OF THE DRAWERS. NO LOCK-IN LOCK-

OUT PROVISIONS ARE REQUIRED.

SEE NOTE 14

SEE NOTE 15

DRAWER 1

DRAWER 2

DRAWER 3

DRAWER 4

DRAWER 5

DIMENSIONS ARE IN INCHES

TOLERANCE ON ANGLES ± 1°

2 PLACE DECIMALS ± 0.03

3 PLACE DECIMALS ±

DO NOT SCALE DRAWING

THIRD ANGLE PROJECTION

MATL ENGR MODELED BY

CONTRACT NUMBER

CONTRACTOR

DRAWN BY

CHECKER

ENGINEER QUALITY ENGINEER

ENGINEER

DATE (YEAR-MO-DA)

DRAWING APPROVAL

DESIGN APPROVAL

A

BB

A

2 1

2 1

M. ANDRINGA

M. ANDRINGA

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC

RELEASE; DISTRIBUTION IS UNLIMITED

APPLICATION

NEXT ASSY USED ON

0607A1000 B7900

REVISION HISTORY

REV DESCRIPTION DATE YY-MO-DA APPROVED

- INITIAL RELEASE 15-09-30 VEV

B7900 REAR TOOL CABINET

0607A1001

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND ARSENAL, IL 61299-7300

SCALE

SIZE

A 59678

CAGE CODE DWG NO.

DESIGN ACTIVITY

SHEETUNIT WT.NONE TBD

2015-04-29

B. VER MULM

V.VONDERA

Number Drawer Label Nominal Depth Foam

C1 C1 - HYDRAULIC CRIMP TOOL,

CONDUIT BENDER HEADS 3.125 INCHES YES

C2 C2 - PLIERS,

ADJUSTABLE WRENCHES 3.125 INCHES YES

C3 C3 - HAMMERS,

SCREWDRIVERS, CUTTERS 3.125 INCHES YES

C4 C4 - ELECTRICAL

TESTERS 5.063 INCHES YES

C5 C5 - TOOL POUCHES 5.063 INCHES NO

NOTES CONTINUED:

17. DRAWER LABELS TO BE COLORED BLACK WITH WHITE

TEXT

18. LABEL MATERIAL: SOLID BLACK POLYCARBONATE, NO

LESS THAN 0.007 INCHES THICK.

19. PEELING: LABELS SHALL RESIST PEELING AND NOT BE

PEELED WITHOUT USE OF TOOLS. THE ADHESIVE

SHALL ADHERE FOR THE LIFE OF THE SYSTEM.

20. LABELS MOUNTED APPROXIMATELY AT THE BOTTOM

OF EACH DRAWER TO THE LEFT SIDE, OFFEST BY 0.25

INCHES FROM EACH SIDE.

21. LABEL LETTERING: LETTERS ON LABELS SHALL CONSIST

OF WHITE CAPITAL LETTERS. LETTERS SHALL BE NO

LESS THAN 0.25 INCHES HIGH.

DIMENSIONS ARE IN INCHES

TOLERANCE ON ANGLES ± 1°

2 PLACE DECIMALS ± 0.03

3 PLACE DECIMALS ±

DO NOT SCALE DRAWING

THIRD ANGLE PROJECTION

MATL ENGR MODELED BY

CONTRACT NUMBER

CONTRACTOR

DRAWN BY

CHECKER

ENGINEER QUALITY ENGINEER

ENGINEER

DATE (YEAR-MO-DA)

DRAWING APPROVAL

DESIGN APPROVAL

A

BB

A

2 1

2 1

M. ANDRINGA

M. ANDRINGA

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC

RELEASE; DISTRIBUTION IS UNLIMITED

APPLICATION

NEXT ASSY USED ON

0607A1000 B7900

REVISION HISTORY

REV DESCRIPTION DATE YY-MO-DA APPROVED

- INITIAL RELEASE 15-09-30 VEV

B7900 REAR TOOL CABINET

0607A1001

US ARMY

ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER

ROCK ISLAND ARSENAL, IL 61299-7300

SCALE

SIZE

A 59678

CAGE CODE DWG NO.

DESIGN ACTIVITY

SHEETUNIT WT.NONE TBD

2015-04-29

B. VER MULM

V.VONDERA

NOTES CONTINUED:

22. DRAWER FOAM SHALL MEET FOAM SPECIFICATIONS

TABLE.

23. DRAWERS C1, C2, C3, AND C4 REQUIRE FOAM.

SPECIFICATIONS

TYPE TOOL FOAM WITH BACKING

STYLE CLOSED-CELL, CROSS-LINKED

MAXIMUM WATER ABSORPTION RATE 0.02 POUNDS / SQUARE FOOT

OVER CUT SURFACES WHEN TESTED BY ASTM D23575

SIZE CUT TO SIZE TO COMPLETELY FILL EACH DRAWER SIDE-TO-SIDE AND FRONT-TO-BACK

CUTOUTS EACH INDIVDUAL TOOL OR CONTAINED SET IS SEPERATED FROM OTHER TOOLS AND EXHIBITS INDIVIDUAL

RETENTION FEATURES

FOAM CORE THICKNESS AS REQUIRED TO MEET TOOL HEIGHT AND TO FIT WITHIN DRAWERS

FOAM CORE DENSITY 4 POUNDS PER CUBIC FOOT

FOAM CORE COLOR DARK GRAY/BLACK

FOAM BACKING THICKNESS 0.125 INCH NOMINAL THICKNESS

FOAM BACKING DENSITY 6 POUNDS PER CUBIC FOOT

FOAM BACKING COLOR RED

TOOL RETENTION FOAM CUTOUTS CONTOURED TO THE OUTSIDE SHAPE OF EACH TOOL; EACH RETENTION FEATURE SHALL BE

SMOOTH AND FREE FROM ROUGH EDGES.

TOOL ACCESS INCLUDE PICK HOLES AND CUT OUT OR RECESSED AREAS AS NECESSARY

TOOL HEIGHT

EACH TOOL PLACED WITHIN ITS CONTOURED CUTOUT SHALL BE HELD NO MORE THAN 0.25 INCHES ABOVE OR BELOW THE PLANE DEFINED BY THE TOP OF THE FOAM ORGANIZER WHEN MEASURED FROM THE HIGHEST

POINT OF THE TOOL.

CHEMICAL RESISTANCE RESISTANT TO WATER, REFRIGERANTS, AUTOMOTIVE OILS, GREASES, LUBRICANTS, FUELS INCLUDING GASOLINE, DIESEL FUEL, JP-8, AND JP-4, ACIDS, BASES, COOLANTS, ALCOHOLS, AND CLEANING AGENTS

RAPID INVENTORY THE RED FOAM BACKING SHALL PROVIDE COLOR CONTRAST IN ORDER TO IDENTIFY MISSING TOOLS.

SEAMS NO VERTICAL SEAMS PERMITTED. HORIZONTAL SEAMS ARE PERMITTED TO LAMINATE LAYERS OF FOAM TO

REACH THE TOTAL THICKNESS NEEDED.

SEAM SEPARATION ALL SEAMS SHALL BE ATTACHED IN A PERMANENT FASHION. THE SEAMS SHALL NOT SEPARATE WHEN FORCE

IS APPLIED; RATHER, THE FOAM ITSELF SHALL TEAR BEFORE THE SEAMS SEPARATE.

RECESSED AREAS

IF NECESSARY FOR THE REMOVAL OF CERTAIN ITEMS, RECESSED AREAS SHALL BE PROVIDED. THESE RECESSED AREAS SHALL ALLOW EASY ACCESS TO SMALLER ITEMS WHILE STILL ALLOWING THE ITEMS TO MEET THE TOOL

HEIGHT REQUIREMENT.