RSLFAC_CDRL-Report_DRAFT.pdf

PDF 4 MB Posted

Attached to
Royal Saudi Land Forces CH-47F and UH-60M Flight Training Devices
Solicitation number
W900KKSAUCH47UH60FT-PRESOL
Issued by

About this file

This document is a Contract Data Requirements List (CDRL) for a federal contract related to CH-47F and UH-60M Flight Training Devices (FTDs) for the U.S. Army.

The contract is issued by SFAE-STR-IPO (Simulation, Training, Test and Threat Program Executive Office) located in Orlando, Florida. The CDRL specifies 15 data items (A001-C005) that the contractor must deliver throughout the contract performance period. Key deliverables include: Integrated Program Management Data and Analysis Reports (monthly), meeting minutes, Requirements Traceability Verification Matrices (platform-specific for CH-47F and UH-60M), Interface Control Documents, System/Subsystem Specifications and Design Descriptions, Software Development Plans, Product Roadmaps and Backlogs, Test Plans and Procedures, Test/Inspection Reports, Safety Assessment Reports, Security Configuration Compliance Reports, Software License Requirements Lists, Software Version Descriptions, Training Facilities Reports, Site Survey Reports, Warranty Performance Reports, and training-related materials. All deliverables are categorized by type (Management, Technical Data Package, Administrative, Safety, Security, Testing, Facilities, Software, and Training Materials) with specified submission dates tied to major program milestones including the Post Award Conference, System Requirements Review, Preliminary Design Review, Critical Design Review, Test Readiness Review, Government Acceptance Testing, On-Site Acceptance Testing, and Physical Configuration Audit. All data is classified as controlled unclassified information (CUI) and is approved for release to DoD personnel, DoD contractors, and Saudi Arabia. Distribution involves electronic delivery through a government collaboration site with files exceeding 5 MB transmitted via DoD SAFE.

View the file

Other files

File Type Posted
RSLFAC_CH-47F FTD SPEC_DRAFT.pdf PDF
RSLFAC_CH47-UH60_SOW-DRAFT.pdf PDF
Section_L-M_Draft.pdf PDF
RSLFAC_Interop_DRAFT.pdf PDF
RSLFAC_UH-60M FTD SPEC_DRAFT.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP TM OTHER MGMT

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE OF THE DATA ITEM

See Block 16

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81861C

5. CONTRACT REFERENCE

SOW Para 3.1.1

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

SEE BLOCK 16

10. FREQUENCY

MNTHLY

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

Block 2: Integrated Program Management Data and Analysis Report (IPMDAR)

1. Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

2. Block 12: First submission shall be due five (5) business days prior to Post Award Conference (PAC).

3. Block 10,13 The Contractor shall not re-baseline any IMS activities without concurrence from the USG. As required, the Contractor shall deliver revised IMS baseline data anytime the data is revised NLT ten (10) business days of revisions for USG approval. The Contractor shall deliver status against the approved IMS baseline monthly. Revisions shall be identified in each submittal by use of Change Bars in MS office, or by similar means to make revisions easily identifiable. The USG will review and approve or disapprove initial baseline submittal with comments NLT ten (10) business days after initial submittal. If disapproved the Contractor shall revise IAW comments and resubmit NLT ten (10) working days after receipt of comments. The USG will review and approve or disapprove IMS baseline revision submittals with comments NLT ten (10) calendar days after submittal. If disapproved the Contractor shall revise IAW comments and resubmit NLT ten (10) calendar days after receipt of comments.

4. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive

See continuation sheet... 15. TOTAL 0 0 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 1 of 2 Pages

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP TM OTHER MGMT

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued) Orlando, FL 32826-3276

5. The Government shall have ten (10) business days after submission for review and comment.

6. The contractor shall have ten (10) business days after Government review to incorporate Government's comments.

7. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER ADMN

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A002

2. TITLE OF THE DATA ITEM

MEETING MINUTES

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-ADMN-81250C

5. CONTRACT REFERENCE

SOW Paras. 3.1.7; 3.2.1–3.2.8; 3.3.4

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

Block 16

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

1. Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

2. Block 10: Multiple times.

3. Block 12/13: Meeting minutes shall be due five (5) working days after the Post Award Conference (PAC), System Requirements Review (SRR), Preliminary Design Review (PDR), Critical Design Review (CDR), Preliminary Physical Configuration Audit (PPCA), Test Readiness Review (TRR), Integrated Product Team (IPT), and Program Management Review (PMR) meetings.

4. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive Orlando, FL 32826-3276

5. The Government shall have ten (10) business days after submission for review and comment.

6. The contractor shall have five (5) working days after Government review to incorporate Government's comments.

7. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted

See continuation sheet... 15. TOTAL 0 0 0

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER ADMN

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued) by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER MGMT

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A003

2. TITLE OF THE DATA ITEM

See Block 16

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-82133

5. CONTRACT REFERENCE

SOW Paras. 3.2.4, 3.2.5, 3.2.6, 3.3.1

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

Block 16

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

Block 2: REQUIREMENTS TRACEABILITY VERIFICATION MATRIX (RTVM)

1. Block 3: The Contractor shall submit platform-specific deliverables using the following naming convention:

A003-001 CH-47F RTVM

A003-002 UH-60M RTVM

Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

2. Block 10: Multiple times. The Government shall have access to the RTVMs through the collaboration site throughout contract performance. The RTVMs shall be updated and maintained as living, configuration-controlled artifacts as the product matures through requirements decomposition, backlog refinement, design, integration, verification, and test.

3. Block 12: First submission shall be due ten (10) business days prior to Systems Requirement Review (SRR) for each platform. The initial submission shall contain all applicable system performance specification requirements and derived requirements for the applicable platform, with initial bidirectional traceability established in accordance with the contractor’s requirements management approach.

4. Block 13: Subsequent submission shall be due ten (10) business days prior to Preliminary Design Review (PDR), Critical Design Review (CDR) for each platform. The PDR submission shall update the RTVM to allocate requirements to the functional subsystems of the applicable FTD and, for software-related requirements, shall include bidirectional traceability to the corresponding items in the Agile backlog (e.g., Epics, Features). The CDR submission shall further update the RTVM to allocate each requirement to the applicable verification method and, when sufficiently matured, to the specific test steps, procedures, or other verification artifacts.

5. Block 13: Final submission shall be due twenty (20) business days after completion of On-Site Acceptance Testing (OSAT) for each platform and shall reflect the final as-tested traceability status of requirements, See continuation sheet... 15. TOTAL 0 0 0

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER MGMT

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued) allocations, verification methods, and associated verification artifacts.

6. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive Orlando, FL 32826-3276

7. The Government shall have ten (10) business days after each submission for review and comment, unless otherwise mutually agreed.

8. The Contractor shall have ten (10) business days after receipt of Government comments to incorporate the Government’s comments and resubmit the updated RTVM, unless otherwise mutually agreed.

9. Contractor format is acceptable, provided the delivered RTVMs clearly present requirements, derived requirements, allocations, backlog traceability (where applicable), verification methods, and associated verification artifacts in a manner that supports Government review and traceability throughout the life of the contract.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER SAFT

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A004

2. TITLE OF THE DATA ITEM

Accident/Incident Report

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-SAFT-81563

5. CONTRACT REFERENCE

SOW Para. 3.6.14

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY 12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

1. Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

2. Block 12/13: Shall be due within 48 hours for minor incidents, within 24 hours for a moderate incident and IMMEDIATE verbal notification & written report within 24 hours for a major incident.

3. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive Orlando, FL 32826-3276

4. The Government shall have ten (10) business days after submission for review and comment.

5. The contractor shall have ten (10) business days after Government review to incorporate Government's comments.

6. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02.

15. TOTAL 0 0 0

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 1 of 1 Pages

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER SESS

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A005

2. TITLE OF THE DATA ITEM 3. SUBTITLE

CMP

4. AUTHORITY (Data Acquisition Document No.)

N/A

5. CONTRACT REFERENCE

SOW Para. 3.1.5

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

Block 16

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

1. Block 4: DI-SESS-80858C

2. Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

3. Block 10: Multiple times.

4. Block 12: First submission shall be due thirty (30) business days after contract award.

5. Block 13: Subsequent submission shall be due ten (10) business days prior to Preliminary Design Review (PDR), Critical Design Review (CDR) and Test Readiness Review (TRR).

7. Block 13: Last submission shall be due twenty (20) business days after On-Site Acceptance Testing (OSAT).

8. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive Orlando, FL 32826-3276

9. The Government shall have ten (10) business days after submission for review and comment.

10. The contractor shall have ten (10) business days after Government review

See continuation sheet... 15. TOTAL 0 0 0

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER SESS

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued) to incorporate Government's comments.

11. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER MGMT

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A006

2. TITLE OF THE DATA ITEM

Contractor’s Risk Management Plan

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81808

5. CONTRACT REFERENCE

SOW Para. 3.1.4

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

SEE BLOCK 16

10. FREQUENCY

Block 16

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

1. Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

2. Block 10: Multiple Times.

3. Block 12: First submission shall be due thirty (30) business days after contract award.

4. Block 13: Subsequent submission shall be due ten (10) business days prior to System Requirements Review (SRR), Preliminary Design Review (PDR), Critical Design Review (CDR), Test Readiness Review (TRR) and each Program Management Review (PMR).

5. Block 13: Last submission shall be due twenty (20) business days after On-Site Acceptance Testing (OSAT).

6. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive Orlando, FL 32826-3276

7. The Government shall have ten (10) business days after submission for review and comment.

8. The contractor shall have ten (10) business days after Government review to incorporate Government's comments.

See continuation sheet... 15. TOTAL 0 0 0

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER MGMT

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued)

9. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP TM OTHER IPSC

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A007

2. TITLE OF THE DATA ITEM

Software Development Plan (SDP)

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-IPSC-81427B

5. CONTRACT REFERENCE

SOW Paras 3.1.8, 3.3.5

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

Block 16

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

1. Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

2. Block 10: Multiple Times.

3. Block 12: First submission shall be due thirty (30) business days after contract award.

4. Block 13: Subsequent submission shall be due ten (10) business days prior to System Requirements Review (SRR), Preliminary Design Review (PDR), Critical Design Review (CDR), and Test Readiness Review (TRR).

5. Block 13: Last submission shall be due twenty (20) business days after On-Site Acceptance Testing (OSAT).

6. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive Orlando, FL 32826-3276

7. The Government shall have ten (10) business days after submission for review and comment.

8. The contractor shall have ten (10) business days after Government review to incorporate Government's comments.

See continuation sheet... 15. TOTAL 0 0 0

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP TM OTHER IPSC

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued)

9. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP TM OTHER

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A008

2. TITLE OF THE DATA ITEM 3. SUBTITLE

Product Roadmap

4. AUTHORITY (Data Acquisition Document No.)

DI-IPSC-82297

5. CONTRACT REFERENCE

SOW Paras. 3.1.8, 3.3.5

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

SEE BLOCK 16

10. FREQUENCY

Block 16

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

1. Block 4: DI-IPSC-82297

Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

2. Block 10: Multiple Times.

3. Block 12: First submission shall be due thirty (30) business days after contract award.

4. Block 13: Subsequent submission shall be due ten (10) business days prior to the Preliminary Design Review (PDR) and Critical Design Review (CDR).

5. Block 13: Updated submissions shall be provided at other times upon Government direction or when major changes to the planned release sequence, software roadmap, or execution approach are approved.

6. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive Orlando, FL 32826-3276

7. The Government shall have ten (10) business days after submission for review and comment.

8. The contractor shall have ten (10) business days after Government review

See continuation sheet... 15. TOTAL 0 0 0

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP TM OTHER

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued) to incorporate Government's comments.

9. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP TM X OTHER

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

A009

2. TITLE OF THE DATA ITEM 3. SUBTITLE

Product Backlog

4. AUTHORITY (Data Acquisition Document No.)

N/A

5. CONTRACT REFERENCE

SOW Para. 3.1.8, 3.3.5

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

Block 16

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE

SEE BLK 16

13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

1. Block 2: DI-IPSC-82298

2. Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

3. Block 10: Multiple Times.

4. Block 12: First submission shall be due thirty (30) business days after contract award.

5. Block 13: Subsequent submission shall be due ten (10) business days prior to the Preliminary Design Review (PDR) and Critical Design Review (CDR).

6. Block 13: The Product Backlog shall be updated throughout contract performance and made continuously available to the Government through the collaboration site and approved development/backlog management tool.

7. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

12211 Science Drive Orlando, FL 32826-3276

8. The Government shall have ten (10) business days after submission for review and comment.

9. The contractor shall have ten (10) business days after Government review

See continuation sheet... 15. TOTAL 0 0 0

A. CONTRACT LINE ITEM NO. B. EXHIBIT

A

C. CATEGORY

TDP TM X OTHER

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued) to incorporate Government's comments.

10. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT

B

C. CATEGORY

TDP X TM OTHER

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

1. DATA ITEM NO.

B001

2. TITLE OF THE DATA ITEM

Interface Control Document (ICD)

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-SESS-81248B

5. CONTRACT REFERENCE

SOW Paras. 3.2.5, 3.2.6, 3.3.2, 3.3.3

6. REQUIRING OFFICE

SFAE-STR-IPO

17. PRICE GROUP

18.ESTIMATED

TOTAL PRICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

SEE BLOCK 16

10. FREQUENCY

Block 16

12.DATE OF FIRST

SUBMISSION

SEE BLK 16

11. AS OF DATE 13.DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft

Final

Reg Repro

16. REMARKS

1. Block 3: The Contractor shall submit platform-specific deliverables using the following naming convention:

B001-001 CH-47F ICD

B001-002 UH-60M ICD

2. Block 9: DISTRIBUTION STATEMENT: IAW DoDI 5230.24 Jan 10, 2023 Distribution statements are authorized with REL TO DoD Military/Civilian Employees, DoD Contractor (Awardee), and Saudi Arabia.

EXPORT CONTROL WARNING. All printed and electronic technical information, including technical information in a digital form, that is determined to contain export-controlled technical information, will be marked as shown in ‘WARNING’ below. When it is technically impractical to use the entire statement, an abbreviated marking may be used and a copy of the full statement added to the notice to accompany the release of export-controlled technical information required by Part 250 of Title 32, CFR.

DISCLOSURE: The enclosed U.S. Army technical data is approved for release to Saudi Arabia as of XX-XXXX-XXXX. Other requests for this document shall be referred to Capability Program Executive Simulation, Training, Test and Threat (CPE ST3), SFAE-STR-IPO, 12211 Science Drive, Orlando, FL 32826-3276.

CUI // REL TO USA, SAU

3. Block 10: Multiple Times.

4. Block 12: First submission shall be due ten (10) business prior to Preliminary Design review (PDR) for each platform.

5. Block 13: Subsequent submission shall be due ten (10) business days prior to Critical Design Review (CDR) for each platform.

6. Block 13: Final platform ICD shall be due ten (10) business days prior to Test Readiness Review (TRR) for each platform.

7. Block 13: For the CH-47F FTD, the final Interoperability Appendix to the ICD shall be due ten (10) business days prior to On-Site Acceptance Testing (OSAT) at Al Qassim

8. Block 14: Reproducible electronic copies shall be made available through the collaboration site. If requested by the Government, reproducible electronic copies shall also be delivered by electronic mail in a format compatible with Microsoft Office or other Government-accepted electronic format. Graphic packages used to create figures, tables, and charts shall be Object Linking and Embedding (OLE) compatible, as applicable. The Contractor shall electronically deliver the data to the USG using the supplied email address. Files exceeding 5 MB shall be delivered via DoD SAFE concurrent with the notification email to the USG. Files that cannot be transmitted electronically shall be mailed to:

PL IPO

ATTN: SFAE-ST3-IPO

See continuation sheet... 15. TOTAL 0 0 0

A. CONTRACT LINE ITEM NO. B. EXHIBIT

B

C. CATEGORY

TDP X TM OTHER

D. SYSTEM/ITEM

RSLFAC CH47F and UH-60M FTDs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

16. REMARKS (Continued) 12211 Science Drive Orlando, FL 32826-3276

8. The Government shall have ten (10) business days after submission for review and comment.

9. The contractor shall have ten (10) business days after Government review to incorporate Government's comments.

10. Contractor format is acceptable.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP X TM OTHER

D. SYSTEM/ITEM

RSLFAC CH47F…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .