W81K00-21-Q-0001 - Solicitation Amendment 0001.pdf

PDF 642 KB Posted

Attached to
Amendment 0001 - Microbial, Identification, and Susceptibility Testing, Brooke Army Medical Center, JBSA Fort Sam Houston, Texas
Solicitation number
W81K00-21-Q-0001
Issued by

About this file

This is an amendment to a solicitation for microbial identification and susceptibility testing services at Brooke Army Medical Center at Joint Base San Antonio Fort Sam Houston in Texas. The amendment revises testing volumes and delivery schedules under existing contract line items, updates the statement of objectives to include additional training requirements, and extends the solicitation closing date to June 24, 2021. The contractor will provide automated mass spectrometry, antimicrobial susceptibility, and biochemical identification testing equipment and reagents along with maintenance and technical support services. Annual testing volumes are identified for rapid microbiology identification, antimicrobial susceptibility, and biochemical identification tests as well as blood culture monitoring reagents. The contractor must also provide operator and annual refresher training.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

W40M USA HLTH CONTRACTING ACT

REGIONAL HEALTH CONTRACT OFF CENTRAL

POC: MEDINA L. WOODSON

3551 ROGER BROOK DR BLDG 3600

FORT SAM HOUSTON TX 78236-6200

11306293-0004

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this modification is to:

A. Incorporate additional training requirements in the Statement of Objectives (SOO) Training Section - 11.3.

B. Revise the quantities on the existing CLINs to accurately reflect the Government's requirement.

C. Adjust the annual testing volumes in the Workload Data Table to accurately reflect the Government requirements in the Statement of Objectives.

D. Extend the solicitation closing date/time to 24 June 2021, 4:00 PM CST.

All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 17

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 10-Jun-2021

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W81K0021Q0001

X 9B. DATED (SEE ITEM 11)

25-May-2021

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

09-Jun-2021

CODE

W40M USA HLTH CONTRACTING ACT

REGIONAL HEALTH CONTRACT OFF CENTRAL

2539 GARDEN AVENUE

FT SAM HOUSTON TX 78234-0000

W81K00 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W81K00

FACILITY CODECODE

EMAIL:TEL:

W81K0021Q0001

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

STATEMENT OF OBJECTIVES

STATEMENT OF OBJECTIVES

Reagents for Automated Mass Spectrometry Rapid Microbiology Identification, Automated Antimicrobial Susceptibility Testing, Automated Biochemical Identification and Blood Culture Testing Department of Pathology and Area Laboratory Services (DPALS)

Brooke Army Medical Center (BAMC)

1. GENERAL REQUIREMENT:

The Department of Pathology and Laboratory Services at Brooke Army Medical Center, JBSA - Fort Sam Houston, Texas has a requirement for automated mass spectrometry rapid microbiology identification testing;

automated antimicrobial susceptibility testing; automated biochemical identification testing; and blood culture monitoring. The number of tests per year are identified in the workload data table.

2. SCOPE OF WORK:

2.1. The successful contractor shall furnish all equipment (to include instrument/equipment/(s)), reagents, consumables, controls, and any necessary services (e.g., maintenance of furnished equipment) to conduct testing under a Cost-per-Test (CPT) Agreement (except as paragraph 2.2 in which contractor will provide only reagents compatible with government equipment). All equipment and reagents/consumables to conduct testing for automated mass spectrometry rapid microbiology identification, automated antimicrobial susceptibility, and automated biochemical microbial identification shall be supplied and serviced through the Contractor to include all parts, equipment, supplies, and other services required to ensure BAMC is able to meet its objectives as listed herein.

2.2 Blood culture testing- Contractor shall provide reagents compatible with government owned Biomerieux

BacT/Alert Virtuo equipment and data management/quality control software that interfaces with each of the systems required.

2.3 The instruments and software provided to conduct testing as per paragraph 2.1 above will not be government owned, and therefore the contractor will be responsible for maintenance and service of their own instrumentation and software.

3. ORDERING PERIOD:

Base Period: 1 October 2021 – 30 September 2022 Option 1: 1 October 2022 – 30 September 2023 Option 2: 1 October 2023 – 30 September 2024 Option 3: 1 October 2024 – 30 September 2025 Option 4: 1 October 2025 – 30 September 2026

3.1 The Government will order items on as-needed basis, and shall only pay for the actual number of tests ordered, received, and accepted by the Government. The quantities listed in the workload data table represent anticipated test volumes for the period of performance listed; however, quantities could increase and/or decrease during certain periods and/or months.

3.2 The inspection and acceptance for all deliverables rendered under this contract will be by the appointed Ordering

Officer. The performance by the contractor technician, the quality of services rendered, and any documentation or written material in support of same, shall be subject to continuous inspection, surveillance and review for acceptance by the designated ordering officer representative. Other evaluation factors will be monitored that are not quantified by numerical measurements.

4. HOURS OF OPERATION:

The microbiology lab is in operation 24 hours a day, 7 days a week. Normal business hours for administrative personnel are Monday through Friday between the hours of 0730 – 1630 CST. Contractor shall coordinate maintenance scheduled with Ordering Contracting Officer and appointed on duty staff in absence of OCOR no less than 48 hours.

5. SECURITY REQUIREMENTS AND SAFETY:

5.1 SECURITY. The Contractor shall ensure its personnel comply with the local installation requirements for vehicle registration and operation on the military facility. Any vehicle entering the military installation must have the minimum liability coverage required by the state in which the performance is located. The Contractor shall ensure its personnel comply with installation and MTF personnel identification and access requirements.

5.2 SAFETY. The Contractor shall ensure its personnel comply with all installation and MTF safety regulations.

Such regulations include, but are not limited to, general safety, fire prevention, and waste disposal. Copies of these regulations are available in the medical activity safety office or may be obtained through the appointed personnel. The use of cellular phones and 2-way radios is expressly forbidden in all Medical Treatment Facilities and Health Clinics. The government and the contractor’s service representative will exchange hazard communication information before the commencement of any repair. When required, the contractor’s service representative will comply with the Office of Safety and Health Administration (OSHA) lockout/tag-out standards while performing sustainment on MD/MDS.

6. INSTRUMENT/EQUIPMENT REQUIREMENT (OWNED BY CONTRACTOR):

6.1 Contractor shall provide all instruments/equipment necessary to conduct testing as per workload data table on the testing identified. The instrument/equipment provided will be utilized for BAMC's automated mass spectrometry rapid microbial identification, automated antimicrobial sensitivity, and automated biochemical microbial identification needs. In addition, the instrument/equipment must include an automated component that facilitates ease of sample preparation and seamless input of data via barcode scanning. A printer for the production of hard copy patient reports and other reports generated shall also be provided.

6.2 The contractor shall provide redundancy in the form of multiple instruments and/or equipment used to perform automated antimicrobial sensitivity, and automated biochemical microbial identification testing.

6.3 These instruments, to include any connections between the instruments/equipment, shall be approved by the US

Food and Drug Administration (FDA).

6.4 The instruments will be able to correctly identify and perform antimicrobial sensitivities from a pure culture of unknown microbiological organism.

6.5 The instruments supplied, all of its associated parts, and all accessories must be maintained at the most up-to-date hardware and software. When necessary to maintain hardware updates, the existing instrument/equipment, associated parts, and accessories must be exchanged by the contractor. All software updates or file exchange shall be completed using CD/DVDs only. At no time will USB, internet or cloud-based services be allowed.

6.6 The server database must be SQL 2016. SQL 2016 Express is not acceptable. The server operating system must be Microsoft 2016 Server.

6.7 The instrument system shall be equipped with an Uninterruptible Power Supply (UPS) capable of providing all necessary electrical power to the instrument/equipment system for at least 45 to 60 minutes.

6.8 The instruments shall be able to be connected to the hospital LIS, currently Composite Health Care System

(CHCS), or whichever LIS system the hospital uses in the future. The contractor must provide full technical support to ensure that the LIS connectivity is functioning properly.

6.9 The instruments, reagents, and software provided shall comply with the specific requirements listed in this

SOO. The instruments and software provided for Automated Microbial Identification and Antimicrobial Susceptibility Testing will not be government owned, and therefore the contractor will be responsible for maintenance and service of the instrumentation and software.

6.10 The data management/quality control software shall be able to generate the following type of reports:

a. Statistical reports - to include positive incidence summary reports, days to detection summary reports, detail reports, positive rate reports, blood culture volume reports, and unconfirmed positive rate reports;

b. Epidemiology reports- to include trending reports, phenotype occurrence reports, phenotype trending reports, susceptibility reports, cumulative by MIC reports, bio-number distribution reports and incidence detail reports; Instrument reports- to include workload reports, load reports, unload reports, and calibration reports.

6.11 Software upgrades. Contractor shall have access to all necessary diagnostic software. All software upgrades, corrective in nature, or which enhance MD/MDS features shall be at no-cost to the government.

6.12 . Contractor shall provide all documentation required to meet all regulatory compliance testing procedures.

6.13 Contractors shall coordinate and conduct a site visit if necessary to the BAMC Microbiology section, for the purpose of surveying and assessing current laboratory set-up, laboratory environmental control, and available utilities with regard to potential placement of their instruments in the laboratory. Any changes to the layout of the laboratory, environmental control, or to utilities as currently in existence to accommodate placement of their proposed instruments must be identified.

6.14 Method Verification (Correlation Studies) will include parallel runs with existing equipment. Specificity and

Sensitivity shall be equal to or exceed the manufacturer stated claims.

6.15 The Contractor will provide one (1) paper copy and one (1) CD copy of the Operator’s and Maintenance manuals and a statement of the warranty terms.

6.16 Lab Layout. The contractor shall provide a diagram or other graphical representation demonstrating how its proposed equipment fits within the dimensions below with its quote.

7. PREVENTATIVE MAINTENANCE, FAILURES AND REPAIRS:

7.1 The contractor shall provide all personnel, equipment, tools, materials, supervision, parts, transportation, and other items and services necessary to perform all required repairs and scheduled preventive maintenance/safety inspections and calibrations of their equipment. Contractor shall coordinate with the designated point of contact all scheduled maintenance within ten (10) business days prior to performing preventative maintenance services.

7.2 The performance of scheduled periodic preventive maintenance, safety checks, and calibrations that are not normally performed at the operator level will be performed by contractor service personnel in accordance with requirements as specified in the contractor’s instrument maintenance manual. The contractor shall be responsible for furnishing maintenance, services, repairs, and parts as required by manufacturer in order to maintain the system in optimal operating condition.

7.3 The contractor shall provide a full service plan to include the recommended unscheduled and preventive maintenance service for their instrument/equipment period. Service shall include repair and replacement of defective parts, complete maintenance program (as required by the manufacturer’s maintenance manuals), and hotline telephone service, in order to assist customer in troubleshooting problems.

7. 4 Preventive maintenance services shall be performed in accordance with the manufacturer’s standard/procedures.

A preventive maintenance service shall include, but is not limited to, safety, calibration, complete operational testing, lubrication, adjustments, and cleaning of equipment to which the operator does not have access. This also includes the installation of all non-operator parts required to ensure proper operation.

7.5 Upon notification of equipment failure own by contractor, the contractor shall respond to telephonic requests for unscheduled repair within 24 hours. Should the instrument/equipment become inoperable, the contractor’s Repair Service Engineer / technician shall be on-site within 24 hours of initial notification for routine/emergency failures.

If the equipment is out of service for longer than 72 hours (from the time of service technician’s arrival on site), the contractor shall notify the government point of contract on duty, in writing, as to the reason(s) (i.e. non-availability of parts, etc.) for non-compliance.

7.6 If the equipment cannot be repaired, a replacement instrument shall be provided within seven (7) days. If the equipment cannot be replaced, the Government may seek remedies for non-compliance with terms and conditions of this contract.

7.7 Within one (1) business day after completion of a repair, the contractor’s representative shall furnish the Point of Contact (POC) one (1) copy of a service report for all services performed. The service report shall contain, at a minimum, the following information:

a. Nomenclature, date, description of services performed (i.e. preventative maintenance service, or unscheduled repair service)

b. Location of services performed, duration of services performed, list of parts replaced and;

c. Other actions taken to restore operability of the instrument/equipment, name of technician.

**Full report shall be submitted to designated government point of contact**

7.8 Contractor shall notify government of any hazard information before beginning equipment repair and shall comply with the Occupational Safety and Health Administration while performing maintenance on electrical equipment.

7.9 When appropriate, the contractor’s representative shall attach and complete a DD Form 2163 (sticker), entitled

“Medical Equipment Verification/Certification” to the equipment upon completion of calibration services. The Point of Contact will provide the DD Form 2163 to the contractors’ representative. If the DD Form 2163 is already attached to the equipment, the contractors' representative shall update the existing DD Form 2163.

Procedures for updating the 2163 will be provided by the Point of Contact.

8. CUSTOMER SERVICE:

8.1 The Contractor shall provide direct customer service and support, during normal business hours and on-call emergency repair service support, to assist operators in correcting equipment operation problems.

8.2 For Emergency Services and unscheduled services the Contractor’s qualified service technician shall be on-site to provide emergency service (service requiring immediate repair) within 24 hours. The equipment shall be repaired and operational at the minimum of 72 hours after arrival of contractor on site.

8.3 The Contractor shall perform preventive maintenance services (PMS), safety tests, calibrations, and unscheduled repair services in accordance with procedures and practices prescribed by the manufacturer of the equipment. Scheduled routine services shall be performed between 0730-1630 LOCAL Monday-Friday, excluding U.S. Holidays.

8.4 The Contractor shall provide a full unscheduled and preventive maintenance service for the instrument/ equipment owned by contractor. All maintenance and repairs shall be inclusive of all costs for the performance of scheduled periodic maintenance (as required by the Contractor’s instrument maintenance manuals), unscheduled maintenance and repair of the analyzers and any associated equipment provided by the Contractor as part of the analyzer system, including replacement parts, replacement part shipment costs, and service technician travel costs for performance of maintenance services.

8.5 The contractor’s qualified service technician shall be on site to provide routine services; service requiring immediate repair; and scheduled services for preventive maintenance (as specified in the Contractor’s instrument maintenance manual), safety and calibration as required by this statement of work. The equipment shall be repaired and operational within 72 hours after arrival of contractor on site.

8.6 Upon analyzer failure, the Contractor’s qualified service technician shall be on-site to provide unlimited emergency service (service requiring immediate repair; an unscheduled maintenance/service requirement) within 24 hours. The equipment shall be repaired and operational within 72 hours after arrival of contractor on site.

8.7 Should the analyzer at BAMC become inoperable, the Contractor’s technical repair specialist shall be on-site within 24 hours of initial notification and make the repair within 72 hours after arrival of contractor on site. If the analyzer cannot be repaired within 72 hours after arrival of contractor on site, a replacement analyzer, at no additional cost to the U. S. Government, will be provided within seven (7) days of the initial notification to be utilized by the U.S. Government until the original instrument is fully repaired and accepted for service.

8.8 During the period when the analyzer is inoperable, the Contractor will arrange the pickup and delivery of critical specimens to a College of American Pathologists accredited clinical laboratory of their choice. The selected laboratory will provide patient reports. Each patient report shall include the testing laboratory’s reference range for the test being performed. The Contractor will be responsible for all costs associated with the provision of this service, including those for delivery of hardcopy patient results, for as long as the analyzer remain inoperable.

8.9 The Contractor shall provide all necessary user-replaceable maintenance items that will be required to support the analyzer, and any analyzer specific tools/supplies necessary to perform operator-level periodic maintenance tasks, at no additional cost to the U.S. Government.

9. DELIVERY OF EQUIPMENT

9.1 All equipment (owned by contractor) shall include delivery, installation, maintenance, and removal upon termination of contract. Contractor shall furnish all necessary calibrators/standards and quality control materials necessary to perform the initial method verifications per CLIA/NCCLS guidelines.

9.2 The instrument (s)/ equipment shall be delivered to the Brooke Army Medical Center (4th floor) within 30 days or less after contract award. Exact installation location shall be coordinated by contractor and government point of contact (OIC and/or NCOIC). Equipment setup, LIS connectivity, on-site training, and method verification studies, shall be completed by vendor personnel within six (6) weeks or less after contract award to ensure that equipment is fully operational.

9.3 SAFETY DATA SHEETS (SDS): The contractor shall provide safety data sheets (SDS) for each item delivered under this contract that is considered to be HAZARDOUS MATERIAL. The SDS shall contain information on the hazards associated with each specific chemical or material. The SDS shall contain at a minimum the following information: identification of the specific hazard, the required practice for the safe use of the product, first aid procedures, and what to do in the event of a spill or other mishap or accident.

10. REAGENTS/CONSUMABLES:

10.1 All assays shall be FDA approved and must have a minimum shelf life of six (6) months upon receipt by the Government, or, if this shelf life requirement cannot be met the Contractor shall identify the guaranteed shelf life after receipt that can be accommodated in their response to the Solicitation for Bid.

10.2 The manufacturer will provide the required quality control materials and test reagents and ensure that there is minimal change in lot numbers during the contract year.

10.3 The blood culture reagents provided must be compatible with the government owned Biomerieux BacT/Alert Virtuo Microbial Detection System.

10.4 All reagents and quality control material shall be provided by the manufacturer of the equipment; be marked with the required storage temperature and expiration dates; be maintained at the proper storage temperature during transportation from the Contractor’s storage facility to the U.S. Government acceptance site and be delivered on time at the appropriate storage temperature. Preservation and packing - Preservation and packing shall be performed in accordance with the best commercial practices and in such a manner to afford adequate protection against any damage during shipment from source to destination.

10.5 The reagents and quality control material must perform within the manufacturer’s stated/published package inserts. Deliveries of required items will be called in to the Contractor by the designated Contracting Officer’s

Representatives. Orders will be delivered within five (5) business days of requested date of delivery.

10.6 Emergency orders will be delivered using overnight shipping, or, if this shipping requirement cannot be met, the

Contractor shall identify the guaranteed emergency order shipping method that can be accommodated in their response to the Solicitation for Bid.

11. TRAINING:

11.1 The Contractor will provide initial operator training to all technicians assigned to the U.S. Government site

(BAMC Department of Pathology Microbiology staff), as well as annual refresher training, as needed, to ensure adequate user competency during times of personnel turnover.

11.2 All training manuals/guides, instructional literature, and any other related written/electronic material shall be provided. Training shall include basic operation of the analyzers, trouble shooting procedures, performance of operator-level periodic preventive maintenance procedures, and use of the data management/quality control software.

11.3 In the case of any significant software or assay procedural updates, the Contractor shall provide one (1) primary (key) operator training slot per major instrument/equipment, one (1) key operator Training per new instrument install, one (1) key operator raining for the existing instrumentation, two (2) On-site in lab training slots for the instrumentation to be used over the 5 year term of the agreement as the lab needs for staff changes. This training can be on or off-site at the Contractor’s full expense.

WORKLOAD DATA TABLE 1.

TYPE OF TEST

(BASE YEAR)

(OPTION 1)

(OPTION 2)

(OPTION 3)

(OPTION 4)

Automated mass spectrometry rapid microbiology identification testing (cost per test)

70,000 test per year

70,000 test per year

Automated antimicrobial susceptibility testing (cost per test)

20,000 test per year

20,000 test per year

20,000 test per year

20,000 test per year

20,000 test per year

Automated biochemical microbial identification testing

5,000 test per year

5,000 test per year

5,000 test per year

5,000 test per year

5,000 test

Blood culture monitoring (reagents only)

30,000 test per year

30,000 test per year

30,000 test per year

30,000 test per year

30,000 test

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0002

The pricing detail quantity has decreased by 40,000.00 from 60,000.00 to 20,000.00.

CLIN 0003

The pricing detail quantity has decreased by 55,000.00 from 60,000.00 to 5,000.00.

CLIN 0004

The pricing detail quantity has increased by 16,000.00 from 14,000.00 to 30,000.00.

CLIN 1002

CLIN 1003

CLIN 1004

CLIN 2002

CLIN 2003

CLIN 2004

CLIN 3002

CLIN 3003

CLIN 3004

CLIN 4002

CLIN 4003

CLIN 4004

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item for CLIN 0002 has been changed from:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 01-OCT-2021 TO

30-SEP-2022

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837 FOB: Destination

W81NWY

To:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 01-OCT-2021 TO

30-SEP-2022

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 0003 has been changed from:

CAGE

POP 01-OCT-2021 TO

30-SEP-2022

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

CAGE

POP 01-OCT-2021 TO

30-SEP-2022

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 0004 has been changed from:

CAGE

POP 01-OCT-2021 TO

30-SEP-2022

N/A N/A

CAGE

POP 01-OCT-2021 TO

30-SEP-2022

The following Delivery Schedule item for CLIN 1002 has been changed from:

POP 01-OCT-2022 TO

30-SEP-2023

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

CAGE

POP 01-OCT-2022 TO

30-SEP-2023

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 1003 has been changed from:

CAGE

POP 01-OCT-2022 TO

30-SEP-2023

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

CAGE

POP 01-OCT-2022 TO

30-SEP-2023

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 1004 has been changed from:

CAGE

POP 01-OCT-2022 TO

30-SEP-2023

CAGE

POP 01-OCT-2022 TO

30-SEP-2023

The following Delivery Schedule item for CLIN 2003 has been changed from:

CAGE

POP 01-OCT-2023 TO

30-SEP-2024

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

CAGE

POP 01-OCT-2023 TO

30-SEP-2024

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 2004 has been changed from:

CAGE

POP 01-OCT-2023 TO

30-SEP-2024

CAGE

POP 01-OCT-2023 TO

30-SEP-2024

The following Delivery Schedule item for CLIN 3002 has been changed from:

CAGE

POP 01-OCT-2024 TO

30-SEP-2025

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

CAGE

POP 01-OCT-2024 TO

30-SEP-2025

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 3003 has been changed from:

CAGE

POP 01-OCT-2024 TO

30-SEP-2025

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

CAGE

POP 01-OCT-2024 TO

30-SEP-2025

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 3004 has been changed from:

CAGE

POP 01-OCT-2024 TO

30-SEP-2025

CAGE

POP 01-OCT-2024 TO

30-SEP-2025

The following Delivery Schedule item for CLIN 4002 has been changed from:

CAGE

POP 01-OCT-2025 TO

30-SEP-2026

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

POP 01-OCT-2025 TO

30-SEP-2026

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 4003 has been changed from:

CAGE

POP 01-OCT-2025 TO

30-SEP-2026

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

CAGE

POP 01-OCT-2025 TO

30-SEP-2026

N/A W2DN BROOKE ARMY MED CTR

W2DN BROOKE ARMY MED CTR

WAREHOUSE RECEIVING DOCK BLDG

3551 ROGER BROOKE DRIVE

JBSA FT SAM HOUSTON TX 78234-4504

210-808-2837

The following Delivery Schedule item for CLIN 4004 has been changed from:

CAGE

POP 01-OCT-2025 TO

30-SEP-2026

POP 01-OCT-2025 TO

30-SEP-2026

(End of Summary of Changes)

File details come from the government source that posted it. Updated .