TIQ-Attach_0003_(Toy_LC_PU)_19R0267.doc

Solicitation W56HZV-19-R-0267 Attachment 0003 Technical Information Questionnaire (TIQ)

August 23, 2019

FAILURE TO PROVIDE ALL OF THE INFORMATION REQUIRED BELOW MAY RENDER YOUR PROPOSAL INELIGIBLE FOR AWARD.

TOYOTA LAND CRUISER PICKUP TRUCK, 4 DOOR

The purpose of this questionnaire is to determine the suitability of your equipment to satisfy the requirements as stated in the specification. YOU MUST PROVIDE A RESPONSE TO ALL QUESTIONS, BLANKS, AND REQUIRED SUPPPORTING DOCUMENTATION REFERENCES. IF ANY OF YOUR ANSWERS REQUIRE FURTHER EXPLANATION, YOU MUST ALSO INCLUDE THAT IN THE APPLICABLE COMMENT SECTION. Failure to provide a response may result in the rejection of your proposal.

Units: The data provided in the response to the TIQ shall be provided in English units, unless otherwise specified. Metric units may be provided if clearly defined and identified.

All written information shall be in English.

In addition to responding to the questions below, the offeror shall provide the following:

(a) Supporting documentation is required, see paragraphs 2(a)(1), 2(i)(1), 2(j)(7), 6(a)(1), 9(a)2, and 9(a)4.

(b) Identification of all modifications and/or redesigns to the previously manufactured base vehicle necessary to meet the requirements of the specifications. The offeror shall also explain in detail the reasons for the modifications or redesigns.

Information Notes

(a) For components procured by the vehicle manufacturer, the component manufacturer’s name and model or part number shall be shown.

(b) Curb weight shall be weight of vehicle offered, completely equipped with coolant, fuel and lubricants, but excluding any weight amount for the operator, passengers or cargo.

(c) Gross Vehicle Weight (GVW) shall include curb weight of the vehicle, full payload weight of operator and all passengers (175 pounds each x 3 = 525 pounds).

GENERAL INFORMATION REQUIRED

Personnel Responding to Questionnaire:

(a) Name:

(b) Job Title:

(c) Company Name:

(d) Telephone/Fax Numbers:

(e) E-mail address:

(f) Mailing address:

(g) Company Website:

Comments:

TOYOTA LAND CRUISER PICKUP TRUCK, 4 DOOR

1. CONFIGURATION

(a) Is the vehicle provided with all new parts? FORMDROPDOWN

(b) Is the vehicle a Toyota Land Cruiser HZJ79 4x4 double cab (4-door) pickup truck? FORMDROPDOWN

(c) Is the vehicle a built to Tropical (General) specifications? FORMDROPDOWN , if yes;

1) Toyota model code

(d) Is the vehicle a 2018 model year or later? FORMDROPDOWN

Comments:

2. EQUIPMENT

Is the vehicle equipped with: (yes/no and briefly expand in comment section)

(a) All of the standard equipment found on a Toyota Land Cruiser HZJ79? FORMDROPDOWN

1) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) listing all standard equipment found on a Toyota Land Cruiser HZJ79 must be provided. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

(b) Air conditioning? FORMDROPDOWN

(c) Fog lights? FORMDROPDOWN

(d) Fuel tank(s) of at least 130 liter capacity? FORMDROPDOWN , describe:

(e) A rear mounted pintle? FORMDROPDOWN , if yes:

1) Manufacturer: Model: Load rating (capacity) pounds

2) Is pintle compatible with trailer drawbar eye dimensions of between 2.0 to 3.0 inches (50.8 to 76.2 mm) loop I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter? FORMDROPDOWN

(f) Heavy duty skid plate(s) covering the engine at a minimum? FORMDROPDOWN , describe:

(g) Brush guard? FORMDROPDOWN Manufacturer: Model:

(h) Front and rear tow hooks for vehicle recovery? FORMDROPDOWN describe:

(i) ROPS? FORMDROPDOWN , describe:

1) SUPPORTING DOCUMENTATION REQUIRED: A brochure, picture, or specification sheet(s) must be provided. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

(j) Self Recovery Winch:

1) Manufacturer: Model:

2) Rated capacity (first line pull):

3) Cable diameter: inches Cable length: inches

4) Safety factor of cable:

5) Roller fairlead? FORMDROPDOWN

6) Remote control provided? FORMDROPDOWN , if yes describe:

7) SUPPORTING DOCUMENTATION REQUIRED: A brochure, picture, or specification sheet(s) must be provided. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

(k) Two 5-gallon or 20-liter jerry cans for diesel fuel and water provided and secured with metal can holders and metal lockdown straps? FORMDROPDOWN ; Location of jerry cans

1) Are the jerry cans marked in universal symbols or labeled in both English and Arabic with one can labeled “DIESEL FUEL ONLY” and the other can labeled “POTABLE WATER ONLY,” and permanently affixed to the can? FORMDROPDOWN

(l) Are all instructions, diagrams, and warning labels bilingual in both English and or Arabic or universal symbols? FORMDROPDOWN

1) Are they permanently affixed to the vehicle? FORMDROPDOWN

(m) Are fuel filler caps or area close to the fuel filler cap provided with labels stating type of fuel that is compatible with the vehicle in both English and Arabic or universal symbols? FORMDROPDOWN

(n) Are manuals provided for each vehicle in both English and Arabic? FORMDROPDOWN

(o) Do all manuals contain an amendment in both English and Arabic stating the ability of the vehicle’s engine to operate on high sulfur content diesel fuel (5,000 ppm or 1/2%)? FORMDROPDOWN

Comments:

3. RATINGS

(a) Are the ratings for the vehicles the manufacturers published ratings at the time of the offer? FORMDROPDOWN

(b) Do all individual component ratings meet or exceed the requirements? FORMDROPDOWN

(c) Gross Vehicle Weight Rating (GVWR)? pounds Comments:

WEIGHTS (pounds) AND DIMENSIONS (inches)

(d) Curb weight:

1) Curb weight, front axle:

2) Curb weight, rear axle:

(e) Weight of occupants (driver, co-driver and passenger; 3 x 175 lbs) 525 pounds

(f) Payload (In addition to the occupants):

(g) GVW (total of (d), (e), and (f) above):

Weight distribution at GVW (total 1 and 2 below must equal to (g))

1) Weight distribution at GVW, front axle:

2) Weight distribution at GVW, rear axle:

Comments:

DIMENSIONS

(h) Ground clearance:

(i) Overall Dimensions

Length:

Width (excluding mirrors):

Height:

(j) Overall width (including mirrors):

Comments:

4. ENGINE

(a) Can the vehicle be operated on high sulfur content diesel fuel (5,000 ppm or 1/2%)? FORMDROPDOWN

1) If so, please describe any degradation in performance from operation on high sulfur content diesel fuel (5,000 ppm or 1/2%):

(b) Is an air cleaner snorkel system provided for deep-water fording? FORMDROPDOWN

(c) Is the vehicle provided with an Exhaust Gas Recirculation (EGR) valve, Diesel Particulate Filter (DPF), Diesel oxidation Catalyst (DOC), Selective Catalytic Reduction Catalyst (SCR) or any other emission control device? FORMDROPDOWN , if yes list emission control device(s):

(d) Have any vehicle modifications and/or alterations been made to allow the vehicle to operate on high sulfur content diesel fuel (5,000 ppm or 1/2%)? FORMDROPDOWN

1) If so, please list the vehicle modifications and/or alterations:

(e) Are the cooling system and air filtration system for the engine designed for a very hot (+130°F or +54°C), dusty environment? FORMDROPDOWN

1) Provide description of cooling system:

2) Describe air filtration system:

Comments:

5. STEERING

(a) Is the vehicle left-hand drive (LHD)? FORMDROPDOWN

Comments:

6. WHEEL ASSEMBLY (TIRE AND WHEEL)

(a) Are all tires provided either Yokohama 7.50R16 08YS402 (Y402B), Michelin XS 7.50R16, or equivalent sand tires? FORMDROPDOWN , if no:

1) SUPPORTING DOCUMENTATION REQUIRED: Provide OEM brochures, specification sheet(s) and a comparision matrix showing that they are equivalent. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

(b) Tires: Manufacturer: ; Model: ;

Tires: Size and load rating: Front: ; Rear: ; Spare:

Tread design: Front:

(c) Is a full size spare wheel assembly with holder provided? FORMDROPDOWN

1) Storage location of spare on vehicle:

(d) Wheels: Manufacturer:

1) Wheels: Size and load rating:

Comments:

7. ELECTRICAL SYSTEM

(a) Is a minimum 120 amp alternator provided? FORMDROPDOWN

1) Manufacturer: Part Number:

(b) Are two heavy duty maintenance free batteries provided? FORMDROPDOWN

1) Manufacturer: Model:

2) Rating(each): amp hr

(c) Is a split charge diode battery isolator provided? FORMDROPDOWN

1) Manufacturer: Model:

(d) Is a switch on the dash provided to alternate between both batteries? FORMDROPDOWN

Comments:

8. COLOR

(a) Is the color of the vehicle aftermarket flat dark olive green? FORMDROPDOWN

(b) Are all mirror housings, door handles, wiper arms (not blades), body/glass moldings, snorkels, emblem/nameplates, gas caps, grilles, bumpers, bull bars, running boards, wheel rims, wheel wells, mud flaps, skid plates and total underbody painted the same as body color? FORMDROPDOWN

Comments

9. BALLISTIC BLANKETS

(a) Is the vehicle provided with ballistic blankets installed underneath the original vehicle carpet? FORMDROPDOWN

1) Manufacturer:

2) SUPPORTING DOCUMENTATION REQUIRED: A brochure or specification sheet(s) must be provided. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

3) What is the expected Ballistic blanket protection level

4) SUPPORTING DOCUMENTATION REQUIRED: Pictures and proposals documenting past ballistic blanket installation projects that were completed must be provided. State where this is provided in your proposal (e.g. page number, paragraph, etc.)

5) What is the expected vehicle protection level after ballistic blankets are installed?

Comments

SOURCE SELECTION SENSITIVE, SEE FAR 3.104