Spec_ATTACH_0002_Toy_LC_Amb-19R0267.doc

Solicitation W56HZV-19-R-0267 Specification (Attachment 0002) August 23, 2019

TOYOTA LAND CRUISER AMBULANCE

THE AMBULANCE SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a Toyota Land Cruiser HZJ78 hard top 4x4 Ambulance.

1.2. The vehicle shall be built to Tropical (General) specifications.

1.3. The vehicle shall be a 2018 model year or later, with no more than 200 miles (320 km) on the odometer.

2. EQUIPMENT

2.1. The vehicle shall be a Toyota Land Cruiser model HZJ78 with all standard equipment and the options specified herein.

2.2. Air conditioning shall be provided.

2.3. AM/FM radio shall be provided.

2.4. Fog lights shall be provided.

2.5. An ABC-type fire extinguisher, minimum 2.2-pound (1.0 kg) capacity, with mounting bracket shall be provided.

2.6. The vehicle shall be provided with a first aid kit, three triangles, and tow rope.

2.7. The vehicle shall be provided with a portable 12-volt air compressor kit with pump, hose, and fittings.

2.8. The vehicle shall be provided with storage for the first aid kit, three triangle, tow rope, and portable 12-volt air compressor kit.

2.9. Front and rear anti-sail mud flaps shall be provided.

2.10. The vehicle shall be provided with a brush guard or bull bar.

2.11. Front and rear tow hooks shall be provided for vehicle recovery.

2.12. Heavy-duty skid plate(s) covering the engine at a minimum shall be provided.

2.13. The vehicle shall be provided with front row rubber floor mats.

2.14. The vehicle shall be provided with two 90-liter (23.8 gallon) fuel tanks.

2.15. Front mounted, heavy-duty, 9,000 lb. (4,082 kg) first line pull electric winch for self recovery shall be provided.

2.15.1. A roller fairlead and a minimum of 90 feet (27.4 m) of cable with a safety factor of 50% above maximum line pull capacity shall be provided with the winch.

2.15.2. Remote control shall be provided.

2.16. Vehicle language requirements:

2.16.1. All instructions, diagrams, and warning labels shall be in both English and Arabic, or in universal symbols, and shall be permanently affixed to the vehicle.

2.16.2. The fuel filler cap or area near the cap shall be labeled with the type of fuel compatible with the vehicle in both English and Arabic or in universal symbols.

2.16.3. A manual(s) shall be provided with every vehicle and written in English and Arabic.

2.16.3.1. All manual(s) provided shall have an amendment stating the ability to operate on high-sulfur content diesel fuel (5,000 ppm or 1/2%).

3. RATINGS

3.1. The vehicle ratings shall be the manufacturer’s published ratings at the time of the offer.

3.2. All individual components, including engine, transmission, driveline, axles, suspension and tires shall be rated at or above the Gross Vehicle Weight (GVW).

3.2.1. For purposes of calculating GVW operator and three passengers weight is set at 700 lbs.

4. ENGINE

4.1. The engine shall be capable of performing as specified herein on high-sulfur content diesel fuel (5,000 ppm or 1/2%).

4.2. An air cleaner snorkel system shall be provided for deep-water fording.

4.3. The engine shall be provided with the heaviest duty available cooling and air filtration system designed for very hot (+130°F or +54°C), dusty environments.

5. Steering

5.1. The vehicle shall be left-hand drive (LHD).

6. WHEEL ASSEMBLY (TIRE AND WHEEL)

6.1. The vehicle shall be provided with Yokohama 7.50R16 08YS402 (Y402B), Michelin XS 7.50R16 or equivalent sand rated tires.

6.2. The vehicle shall be provided with a full-size spare wheel assembly with holder.

6.3. All tires shall be of the same size, load rating and tread design, and all wheel assemblies shall be interchangeable, including the spare wheel assembly.

7. ELECTRICAL SYSTEM

7.1. A warning siren shall be provided.

7.2. A public address system shall be provided.

7.3. The vehicle shall be provided with a minimum 120-amp alternator.

7.4. The vehicle shall be provided with two heavy-duty, minimum 70-amp hour, maintenance-free batteries, split charge diode battery isolator, and a switch on the dash to alternate between both batteries.

7.5. Emergency blue warning lights shall be provided. (LED, halogen, strobe, or a combination of all three types)

7.5.1. The emergency warning lights shall be visible from all sides of the vehicle, including the rear.

8. COLOR AND MARKINGS

8.1. The exterior color of the vehicle (cab and ambulance body) shall be aftermarket Flat Dark Olive Green as specified in the solicitation. All mirror housings, door handles, wiper arms (not blades), body/glass moldings, snorkels, emblem/nameplates, gas caps, grilles, bumpers, bull bars, running boards, wheel rims, wheel wells, mud flaps, skid plates and total underbody shall be painted the same as the body color.

8.2. The vehicle shall be provided with high-performance reflective decals on both sides, the front, rear and top of the vehicle. The decals shall be the largest size that can be placed on these surfaces. The decals shall be a red “crescent” shape.

8.2.1. The decals shall be securely affixed or adhered to the vehicle, have a smooth surface, with no air pockets, and shall have a minimum life of 5 years.

8.2.2. Once applied, the decals shall not be able to be removed in one piece (i.e., rip/tear into small pieces).

9. Ambulance body (patient compartment)

9.1. There shall be an opening from the patient compartment to the cab, partitioned with a curtain or other means for privacy, but still allowing for communication between the driver and the medic.

9.1.1. If the patient compartment is closed off from the cab then the patient compartment shall be provided with air conditioning and heating systems with independent controls in the patient compartment.

9.2. If side and rear windows are provided in the patient compartment, they shall be tinted.

9.3. Rear loading lights and a foldable ramp shall be provided.

9.4. The patient compartment flooring shall be a seamless sheet of material, appropriate for ambulances, and easy to clean and sanitize.

9.5. The patient compartment shall be provided with general interior lighting.

9.6. A securely mounted two person bench with seatbelts shall be provided in the patient compartment.

9.6.1. The bench shall be located adjacent to the stretcher such that the medic can provide patient care while the ambulance is in motion.

9.7. The patient compartment shall also contain the following items:

9.7.1. A medical cabinet.

9.7.2. An oxygen supply kit with oxygen regulator and mask.

9.7.3. A secured oxygen cylinder(s) capable of supplying 2.64 gallons (10 liters) of oxygen.

9.7.4. A main wheeled stretcher.

9.7.5. A litter.

9.7.6. A first aid EMT first responder kit with a minimum 100 pieces that covers the following areas:

9.7.6.1. Severe bleeding

9.7.6.2. Minor wounds

9.7.6.3. Splinting and immobilization

9.7.6.4. Burns

9.7.6.5. Medications and topicals

9.7.6.6. Personal protection

9.7.7. A hook for an IV (Intravenous) drip bag.

9.7.8. A waste basket suitable for medical waste.

9.7.9. Two 12-volt power sockets.

9.8. The patient compartment electrical requirements shall be capable of being powered by the vehicle electrical system, and shall be sufficient to operate standard ambulance medical equipment.

10. BALLISTIC BLANKETS

10.1. The vehicle shall be provided with ballistic blankets installed underneath the original vehicle floor carpet and behind all door trim and all front, back, & side trim panels.

10.1.1. All ballistic panels shall be overlapped at least 2 cm.

10.1.2. All ballistic panels shall be glued-down.

10.2. The ballistic blankets shall provide protection of 1.1 gram fragment simulating projectile (FSP) to V50 greater than 600 m/sec per STANAG 2920.