Spec_ATTACH_0001_Toy_LC_PU-19R0267.doc

Solicitation W56HZV-19-R-0267

Specification (Attachment 0001)

August 23, 2019

TOYOTA LAND CRUISER PICKUP TRUCK (4-DOOR)

THE TRUCK SHALL BE PROVIDED WITH ALL NEW PARTS, THE MANUFACTURER’S STANDARD EQUIPMENT, AND THE FOLLOWING MINIMUM EQUIPMENT AND CAPABILITIES:

1. CONFIGURATION

1.1. The vehicle shall be a Toyota Land Cruiser HZJ79 4x4 double cab (4-door) Pickup truck.

1.2. The vehicle shall be built to Tropical (General) specifications.

1.3. The vehicle shall be a 2018 model year or later, with no more than 200 miles (320 km) on the odometer.

2. EQUIPMENT

2.1. The vehicle shall be a Toyota Land Cruiser model HZJ79 with all standard equipment and the options specified herein.

2.2. Air conditioning shall be provided.

2.3. AM/FM radio shall be provided.

2.4. Fog lights shall be provided.

2.5. An ABC-type fire extinguisher, minimum 2.2-pound (1.0 kg) capacity, with mounting bracket shall be provided.

2.6. The vehicle shall be provided with a first aid kit, three triangles, and tow rope.

2.7. The vehicle shall be provided with a portable 12-volt air compressor kit with pump, hose, and fittings.

2.8. The vehicle shall be provided with storage for the first aid kit, three triangle, tow rope, and portable 12-volt air compressor kit.

2.9. Provided with a 130-liter (34.4 gallon) capacity fuel tank.

2.10. Front and rear anti-sail mud flaps shall be provided.

2.11. The vehicle shall be provided with front row rubber floor mats.

2.12. Vehicle shall be provided with a rear mounted pintle.

2.12.1. Pintle shall be compatible with trailer drawbar eye dimensions of between 2.0 to 3.0 inches (50.8 to 76.2 mm) loop I.D. and 1.25 to 1.62 inches (31.8 to 41.1 mm) loop cross-section diameter.

2.13. Heavy-duty skid plate(s) covering the engine at a minimum, shall be provided.

2.14. The vehicle shall be provided with a brush guard.

2.15. Front and rear tow hooks shall be provided for vehicle recovery.

2.16. Vehicle shall be provided with Roll-Over Protection System (ROPS) e.g. styling bar or roll bar.

2.17. Front mounted, heavy-duty, 9,000 lb. (4,082 kg) first line pull electric winch for self recovery shall be provided.

2.17.1. A roller fairlead and a minimum of 90 feet (27.4 m) of wire rope with a safety factor of 50% above maximum line pull capacity shall be provided with the winch.

2.17.2. Remote control shall be provided.

2.18. Two 20-liter (or 5-gallon) metal jerry cans for diesel fuel and water shall be provided, both in body color, secured with metal can holders and metal lockdown straps against the forward inner side walls of the pickup bed.

2.18.1. The jerry cans shall be permanently marked in universal symbols or labeled in both English and Arabic, with one can labeled “DIESEL FUEL ONLY” and the other can labeled “POTABLE WATER ONLY”

2.19. Vehicle language requirements:

2.19.1. All instructions, diagrams, and warning labels shall be in both English and Arabic, or in universal symbols, and shall be permanently affixed to the vehicle.

2.19.2. Fuel filler cap or area near the cap shall be labeled with the type of fuel compatible with the vehicle in both English and Arabic or in universal symbols.

2.19.3. A manual(s) shall be provided with every vehicle and written in English and Arabic.

2.19.3.1. All manual(s) provided shall have an amendment stating the ability to operate on high-sulfur content diesel fuel (5,000 ppm or 1/2%).

3. RATINGS

3.1. Vehicle ratings shall be the manufacturer’s published ratings at the time of the offer.

3.2. All individual components, including engine, transmission, driveline, frame, brakes, axles, suspension and tires shall be rated at or above the Gross Vehicle Weight (GVW).

4. ENGINE

4.1. The engine shall be capable of performing as specified herein on high-sulfur content diesel fuel (5,000 ppm or 1/2%).

4.2. An air cleaner snorkel system shall be provided for deep-water fording.

4.3. Engine shall be provided with the heaviest duty available cooling and air filtration system designed for very hot (+130°F or +54°C), dusty environments.

5. Steering

5.1. The vehicle shall be left-hand drive (LHD).

6. WHEEL ASSEMBLY (TIRE AND WHEEL)

6.1. The vehicle shall be provided with Yokohama 7.50R16 08YS402 (Y402B), Michelin XS 7.50R16 or equivalent sand rated tires.

6.2. The vehicle shall be provided with a full-size spare wheel assembly with holder.

6.3. All tires shall be of the same size, load rating and tread design, and all wheel assemblies shall be interchangeable, including the spare wheel assembly.

7. ELECTRICAL SYSTEM

7.1. The vehicle shall be provided with a minimum 120-amp alternator.

7.2. The vehicle shall be provided with two heavy-duty minimum 70-amp hour maintenance free batteries, split charge diode battery isolator, and a switch on the dash to alternate between both batteries.

8. COLOR

8.1. The exterior color of the vehicle shall be aftermarket Flat Dark Olive Green. All mirror housings, door handles, wiper arms (not blades), body/glass moldings, snorkels, emblem/nameplates, gas caps, grilles, bumpers, bull bars, running boards, wheel rims, wheel wells, mud flaps, skid plates, and total underbody shall be painted same as body color.

9. BALLISTIC BLANKETS

9.1. The vehicle shall be provided with ballistic blankets installed underneath the original vehicle floor carpet and behind all door trim and all front, back, & side trim panels.

9.1.1. All ballistic panels shall be overlapped at least 2 cm.

9.1.2. All ballistic panels shall be glued-down.

9.2. The ballistic blankets shall provide protection of 1.1 gram fragment simulating projectile (FSP) to V50 greater than 600 m/sec per STANAG 2920.