EXHIBIT A_CDRLS_A001 thru A035.docx

DOCX document 61 KB Posted Dec 20, 2019

Attached to: System Technical Support (STS)
Solicitation number: W56HZV-19-R-0122
Issued by: Department of the Army Materiel Command TACOM Life Cycle Management Command

View the file

Other files

File	Type	Posted
EXHIBIT B_CDRLS_A036 thru A044.DOCX	DOCX document	Dec 20, 2019
Attachment 0004 List of CDRLs.xlsx	XLSX spreadsheet	Dec 20, 2019
Attachment 0002 MIL-STD-31000B Option Selection Worksheet.pdf	PDF	Dec 20, 2019
Attachment 0005 Service Bulletin Board Log.xlsx	XLSX spreadsheet	Dec 20, 2019
Attachment 0006 TMCR.doc	DOC document	Dec 20, 2019
Attachment 0001 LMI Provisioning Data Analysis.docx	DOCX document	Dec 20, 2019
W56HZV19R0122_PADDS_Closing date of 21JAN2020_1 pm.pdf	PDF	Dec 20, 2019
Attachment 0003 ECPs_01OCT2019.xlsx	XLSX spreadsheet	Dec 20, 2019

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DATA REQUIREMENTS LIST Form Approval OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 440 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO: 9001

B. EXHIBIT: A

C. CATEGORY:

D. SYSTEM/ITEM: Light Armored Vehicle System Technical Support (STS)

E. CONTRACT/PR NO.: W56HZV-20-C-XXXX (TBD)

F. CONTRACTOR: CCC/GDLS-C

G. PREPARED BY: Ashis Patel, Procurement Analyst

H. DATE: 01OCT2019

I. APPROVED BY: UMAIR CHUGHTAI, Logistics Specialist

J. DATE: 01OCT2019

1. DATA ITEM NO. A001

2. TITLE OF DATA ITEM: Cost Performance Report

3. SUBTITLE: Cost Data

4. AUTHORITY: DI-FNCL-80912A

5. CONTRACT REFERENCE: C.2.4

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code B; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 DCMA ACO DCMA-Canada London 1 Umair Chughtai Umair.n.chughtai.civ@mail.mil 1 FoV-LAV: Joanne LaBelle joanne.labelle2.civ@mail.mil 1 FoV-LAV: Mark Gerhard mark.c.gerhard.civ@mail.mil 1

15. TOTAL: 6

16. REMARKS:

The Cost Performance Report shall be delivered electronically in contractor format. The report shall include Budgeted Cost of Work Scheduled (BCWS); Budgeted Cost of Work Performed (BCWP); Actual Cost of Work Performed (ACWP); Schedule Variance (SV) Cost Variance (CV); Latest Revised Estimate at Completion (REC).

Blocks 10, 12, and 13 will be specified in the WD.

DISTRIBUTION STATEMENT B. Distribution authorized to U.S. Government agencies only; Propriety Information, 1 Oct 2019. Other requests for this document shall be referred to PM LAV or Saudi Arabian Management Office (SAMO) 6501 East 11 Mile Road, Warren MI 48167-5000.

1. DATA ITEM NO. A002

2. TITLE OF DATA ITEM: Conference Agenda

3. SUBTITLE: Agenda

4. AUTHORITY: DI-ADMN-81249B

5. CONTRACT REFERENCE: C.2.1.2

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code B; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 Umair Chughtai Umair.n.chughtai.civ@mail.mil 1 FoV-LAV: Joanne LaBelle joanne.labelle2.civ@mail.mil 1 FoV-LAV: Mark Gerhard mark.c.gerhard.civ@mail.mil 1

15. TOTAL: 5

16. REMARKS:

Contractor shall submit the conference agenda in contractor format seven business days prior to the meeting. The Government will provide comments within two business days of receipt of contractor submission.

Blocks 10, 12, and 13 will be specified in the WD.

1. DATA ITEM NO. A003

2. TITLE OF DATA ITEM: Report, Record of Meeting/Minutes

3. SUBTITLE: Agenda Meeting Minutes

4. AUTHORITY: DI-ADMN-81505

5. CONTRACT REFERENCE: C.2.1.3, C.11.2

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code B; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 5

16. REMARKS:

Blocks 10, 12, and 13 as specified in the WD.

Shall be delivered electronically in contractor format.

DISTRIBUTION STATEMENT B. Distribution authorized to U.S. Government agencies only; Propriety Information/ Administrative or Operational Use, 1 Oct 2019. Other requests for this document shall be referred to PM LAV or Saudi Arabian Management Office (SAMO) 6501 East 11 Mile Road, Warren MI 48167-5000.

1. DATA ITEM NO. A004

2. TITLE OF DATA ITEM: Man-hour Estimate, Technical Cost Proposals

3. SUBTITLE: Rough Order Magnitude (ROM)

4. AUTHORITY: DI-FNCL-81116

5. CONTRACT REFERENCE: C.2.4, C.2.6

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code B; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 Umair Chughtai Umair.n.chughtai.civ@mail.mil 1

15. TOTAL: 3

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A005

2. TITLE OF DATA ITEM: Incoming Inspection Summary Report

3. SUBTITLE:

4. AUTHORITY: DI-QCIC-8037A

5. CONTRACT REFERENCE: C.8.13

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code B; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A006

2. TITLE OF DATA ITEM: Technical Report - Study/Services

3. SUBTITLE:

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.2.2.1, C.6.1.1, C.6.1.2, C.6.1.5, C.6.1.8, C.7.5.10, C.7.6.2, C.8.14.1

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 5

16. REMARKS: The below information applies to USMC-PMLAV:

At the request of the COR, the contractor shall submit Modification Instructions for approved ECPs.

Blocks 10, 12, and 13 will be specified in the WD.

The contractor shall develop, validate, and deliver the MI IAW the MIL-DTL 28999C and MCSC I-Type Template.

(1) VERIFICATION DRAFT EQUIPMENT PUBLICATION/PRELIMINARY MI (DEP/PMI). Contractor shall deliver one (1) electronic copy and one (1) complete set of Microsoft Word source files (including all illustrations (Computer Graphics Metafile (CGM))) of the MI within 30 calendar days after the start of the contract. The MI shall be representative of the final product and shall be in the same format as the Final Reproducible Copy (FRC). The contractor shall incorporate all changes and additions in the Verification DEP/PMI. The Government will review the Verification DEP/PMI and provide comments. The contractor shall incorporate any Government comments and re-deliver one (1) electronic copy of the updated Verification DEP/PMI within 30 calendar days of receipt of Government comments. The review process of the Verification DEP/PMI will continue until the Government accepts a Verification DEP/PMI submission.

(2) FINAL DRAFT EQUIPMENT PUBLICATION (FDEP). Contractor shall deliver one (1) electronic copy of the MI within 30 calendar days after completion of Government Verification. The contractor shall incorporate all DEP/PMI review and verification corrections, changes and additions in the FDEP. If the contractor changes content that was not included in the Verification master mark-up, they shall identify those changes. The Government will review the FDEP and provide comments. The contractor shall incorporate any Government comments and re-deliver one (1) electronic copy of the updated FDEP within 15 calendar days of receipt of Government comments. The review process of the FDEP will continue until the Government accepts an FDEP submission.

(3) FINAL REPRODUCIBLE COPY (FRC). Contractor shall deliver one (1) electronic copy of the MI no later than 15 calendar days after Government acceptance of the FDEP. The final delivery shall include a complete Electronic Technical Manual (ETM) in searchable and editable Portable Document Format (PDF) with fonts embedded, and no Unicode mapping issues present, one (1) set of Microsoft Word files and digital illustration files (Computer Graphics Metafile (CGM)). FRC shall include the final resolution of all comments and recommendations made by the Government as a result of testing, Government review(s), results from the contractor Validation, Government Verification and maintenance literature review(s). CD-ROMs shall be delivered as follows: one (1) CD-ROM containing PDF file and one (1) CD-ROM containing source data Microsoft Word and illustration files (Computer Graphics Metafile (CGM)) for the MI. The Contractor shall grant the Government unlimited rights to use any and all publications data/products produced under this DO.

Government receipt of documentation does not constitute acceptance. FRC delivery shall not be accepted until the MI has been authenticated. The contractor will be notified when the MI has been authenticated.

Shall be delivered electronically in contractor format.

DISTRIBUTION STATEMENT D. Distribution authorized to Department of Defense and U.S DOD Contractors only; Administrative or Operational Use, 1 Oct 2019. Other requests for this document shall be referred to PM LAV or Saudi Arabian Management Office (SAMO) 6501 East 11 Mile Road, Warren MI 48167-5000.

1. DATA ITEM NO. A007

2. TITLE OF DATA ITEM: Human Engineering

3. SUBTITLE: Human Factors Engineering Analysis

4. AUTHORITY: MIL-STD-1472

5. CONTRACT REFERENCE: C.6.1.3

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

1. DATA ITEM NO. A008

2. TITLE OF DATA ITEM:

3. SUBTITLE: System Evaluation Report

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.6.1.4

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A009 RESERVED

1. DATA ITEM NO. A010

2. TITLE OF DATA ITEM: Safety Assessment Report (SAR)

3. SUBTITLE:

4. AUTHORITY: DI-SAFT-80102C

5. CONTRACT REFERENCE: C.6.1.6

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code B; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1

DCMA ACO DCMA-Canada London 1

15. TOTAL: 4

1. DATA ITEM NO. A011

2. TITLE OF DATA ITEM: Health Hazard Analysis Report (HHAR)

3. SUBTITLE:

4. AUTHORITY: DI-SAFT-80102C

5. CONTRACT REFERENCE: C.6.1.7

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code B; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1

DCMA ACO DCMA-Canada London 1

15. TOTAL: 4

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A012

2. TITLE OF DATA ITEM: Engineering Data For Provisioning (EDFP)

3. SUBTITLE:

4. AUTHORITY: DI-SESS-81874

5. CONTRACT REFERENCE: C.8.1

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code B; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

DISTRIBUTION STATEMENT B. Distribution authorized to U.S. Government agencies only; Administrative or Operational Use, 1 Oct 2019. Other requests for this document shall be referred to PM LAV or Saudi Arabian Management Office (SAMO) 6501 East 11 Mile Road, Warren MI 48167-5000.

1. DATA ITEM NO. A013

2. TITLE OF DATA ITEM: Supportability Analysis

3. SUBTITLE: Logistics Product Data Summaries

4. AUTHORITY: DI-SESS-81759

5. CONTRACT REFERENCE: C.8.3, C.8.3.1

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: ASREQ

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A014

2. TITLE OF DATA ITEM: Indented Bill of Material (IBOM)

3. SUBTITLE: Technical Report - Study/Services

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.5.3

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: AQREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 5

Blocks 10, 12, and 13 will be specified in the WD. Indented Bill of Materials is a bill of materials to show the lower-level items of the specified item by level according to the structure, and is used for the engineering of the similar products, the consideration of the production improvement or the product cost, and the planning of the product manufacturing.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A015

2. TITLE OF DATA ITEM: Provisioning Master Record (PMR)

3. SUBTITLE: Technical Report - Study/Services

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.8.5, C.13.1.2

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

Blocks 10, 12, and 13 will be specified in the WD.

Block 14: The contractor shall submit one (1) copy electronically to the people in stated above in block 14. Data shall be readable in Microsoft Office Suite file format."

1. DATA ITEM NO. A016 RESERVED

1. DATA ITEM NO. A017

2. TITLE OF DATA ITEM: Packaging Development Data Report

3. SUBTITLE: Packaging Data Development

4. AUTHORITY: DI-PACK-81582A

5. CONTRACT REFERENCE: C.8.6

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

Block 4: In addition to the block 4 Authority the Contractor can also use as a guide packaging plan IAW MIL-STD-2073-1E.

Blocks 10, 12, and 13 will be specified in the WD.

1. DATA ITEM NO. A018 RESERVED

1. DATA ITEM NO. A019

2. TITLE OF DATA ITEM: Long Lead Time Items List (LLTIL)

3. SUBTITLE: Technical Report–Study/Services

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.8.7

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

1. DATA ITEM NO. A020

2. TITLE OF DATA ITEM: Supplemental Data for Provisioning (SDFP)

3. SUBTITLE: Technical Report–Study/Services

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.8.8, C.8.8.1

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

Blocks 10, 12, and 13 will be specified in the WD. Shall be used as a guide DI-ALSS-81557.

1. DATA ITEM NO. A021

2. TITLE OF DATA ITEM: Special Tools & Test Equipment (STTE) Listing

3. SUBTITLE:

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.8.9

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A022 RESERVED

1. DATA ITEM NO. A023

2. TITLE OF DATA ITEM: Technical Publications (TP)

3. SUBTITLE: Technical Reports – Study/Services

4. AUTHORITY: DI-MISC-80508B (FMS) / MIL-STD-40051-1C/MIL-STD-40051-2C/MIL-PRF-32436/DI-MISC-80508B (USMC/PM-LAV)

5. CONTRACT REFERENCE: C.8.10, C.8.14.1

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

FMS: Ashis Patel ashis.s.patel.civ@mail.mil 1 FMS: KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 FMS: Umair Chughtai Umair.n.chughtai.civ@mail.mil 1 DCMA ACO DCMA-Canada London 1 FoV-LAV: Joanne LaBelle joanne.labelle2.civ@mail.mil 1 FoV-LAV: Mark Gerhard mark.c.gerhard.civ@mail.mil 1

15. TOTAL: 6

Note: For all FMS related ECPs, please use FMS POCs listed above in Block 14. For all USMC FoV-LAV related ECPs, please use FoV-LAV PCO listed above in Block 14. 3

16. REMARKS: The below information applies to USMC-PMLAV:

Blocks 10, 12, and 13 will be specified in the WD.

The contractor shall develop, validate, and deliver the Technical Publications IAW MIL-STD-40051-1C, guidance found in MIL-HDBK-1222F, MIL-HDBK-2361D Document Type Definition, and Style Sheets available at https://www.logsa.army.mil/mil40051/menu.cfm (Links; Document Type Definition (DTD) for MIL-STD-40051 and Style Sheets for MIL-STD-40051).

(1) VERIFICATION DRAFT EQUIPMENT PUBLICATION/PRELIMINARY TECHNICAL MANUAL (DEP/PTM). Contractor shall deliver one (1) electronic copy and one (1) complete set of XML source files that follow the MIL-STD-40051-1C using the 6.1 (including all illustrations [Computer Graphics Metafile (CGM)]) of the Technical Publication within 30 calendar days after the start of the contract. The Technical Publications shall be representative of the final product and shall be in the same format as the Final Reproducible Copy (FRC). The contractor shall incorporate all changes and additions in the Verification DEP/PTM. The Government will review the Verification DEP/PTM and provide comments. The contractor shall incorporate any Government comments and re-deliver one (1) electronic copy of the updated Verification DEP/PTM within 30 calendar days of receipt of Government comments. The review process of the Verification DEP/PTM will continue until the Government accepts a Verification DEP/PTM submission.

(2) FINAL DRAFT EQUIPMENT PUBLICATION (FDEP). Contractor shall deliver one (1) electronic copy of the Technical Publications within 30 calendar days after completion of Government Verification. The contractor shall incorporate all DEP/PTM review and verification corrections, changes and additions in the FDEP. If the contractor changes content that was not included in the Verification master mark-up, they shall identify those changes. The Government will review the FDEP and provide comments. The contractor shall incorporate any Government comments and re-deliver one (1) electronic copy of the updated FDEP within 15 calendar days of receipt of Government comments. The review process of the FDEP will continue until the Government accepts an FDEP submission.

(3) FINAL REPRODUCIBLE COPY (FRC). Contractor shall deliver one (1) electronic copy of the Technical Publications no later than 15 calendar days after Government acceptance of the FDEP. The final delivery shall include a complete Electronic Technical Manual (ETM) in searchable and editable Portable Document Format (PDF) with fonts embedded, and no Unicode mapping issues present, one (1) set of XML files and digital illustration files (Computer Graphics Metafile (CGM)). FRC shall include the final resolution of all comments and recommendations made by the Government as a result of testing, Government review(s), results from the contractor Validation, Government Verification and maintenance literature review(s). CD-ROMs shall be delivered as follows: one (1) CD-ROM containing PDF file and one (1) CD-ROM containing source data XML and illustration files (Computer Graphics Metafile (CGM)) for the TM. The Contractor shall grant the Government unlimited rights to use any and all publications data/products produced under this DO.

Government receipt of documentation does not constitute acceptance. FRC delivery shall not be accepted until the manual has been authenticated. The contractor will be notified when the manual has been authenticated.

1. DATA ITEM NO. A024

2. TITLE OF DATA ITEM: LSA 036 Report

3. SUBTITLE: Technical Report - Study/Services

4. AUTHORITY: DI-MISC-80508B (FMS) / DI-SESS-81758A, DI-SESS-81759 (USMC/PM-LAV)

5. CONTRACT REFERENCE: C.8.11

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 6

Note: For all FMS related ECPs, please use FMS POCs listed above in Block 14. For all USMC FoV-LAV related ECPs, please use FoV-LAV PCO listed above in Block 14. 4

16. REMARKS: The below information applies to USMC-PMLAV:

Contractor format is not acceptable. Contractor shall deliver LSA reports (LSA-009, Support Items List and LSA-036 Provisioning Requirements) in .HTML,.TXT, and PDF formats generated using the LSAR database IAW TA-HB-0007-1. LPD delivery shall consist of the entire LSAR database, reports, and any supporting documentation in MS Office and PDF and .TXT formats on a CD-ROM, FTP, or via electronic mail.

Tailor DI-SESS-81758A as follows:

Format: XML Schema's and XML file is not acceptable for LSA-036 report.

LSA-036 report shall be submitted as a text file in 1388-2B format.

The LSA-036 report shall be error free.

See Logistics Product Data and Summaries - Attribute Selection Worksheet.

Tailor DI-SESS-81759 as follows:

Refer to TA-HB-0007-1 Logistics Product Data Reports Handbook

1. DATA ITEM NO. A025

2. TITLE OF DATA ITEM: Val/Ver Task List

3. SUBTITLE: Technical Report - Study/Services

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.9.2

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 6

Note: For all FMS related ECPs, please use FMS POCs listed above in Block 14. For all USMC FoV-LAV related ECPs, please use FoV-LAV PCO listed above in Block 14. 4

16. REMARKS:

1. DATA ITEM NO. A026

2. TITLE OF DATA ITEM: Val/Ver or Logistics Review Plan

3. SUBTITLE: Technical Report - Study/Services

4. AUTHORITY: DI-MISC-80508B

5. CONTRACT REFERENCE: C.9.3

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 6

Note: For all FMS related ECPs, please use FMS POCs listed above in Block 14. For all USMC FoV-LAV related ECPs, please use FoV-LAV PCO listed above in Block 14. 4

16. REMARKS: The below information applies to USMC-PMLAV:

The Validation/Verification Plan shall specify how the TP content will be validated and verified along with when and where. The Validation/Verification Plan shall describe the validation/verification method used for each type of TP content.

An initial Validation and Verification Plan shall be submitted 60 calendar days prior to start of the contractor validation effort and a separate one prior to the start of the verification effort. The Government will review and determine acceptability within 30 calendar days of receipt. The contractor shall incorporate any Government comments and re-submit for approval within 30 calendar days of receipt of comments. The Plans shall be considered a draft until accepted by the Government.

Delivery shall be in contractor’s format. Electronic copy shall be delivered via e-mail.

1. DATA ITEM NO. A027

2. TITLE OF DATA ITEM: List of Discrepancies

3. SUBTITLE: Technical Report - Study/Services

4. AUTHORITY: DI-MISC-80508B (FMS) / DI-TMSS-81817 (USMC/PM-LAV)

5. CONTRACT REFERENCE: C.9.4

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 Umair Chughtai Umair.n.chughtai.civ@mail.mil 1 DCMA ACO DCMA-Canada London 1 FoV-LAV: Joanne LaBelle joanne.labelle2.civ@mail.mil 1 FoV-LAV: Mark Gerhard mark.c.gerhard.civ@mail.mil 1

15. TOTAL: 6

16. REMARKS: The below information applies to USMC-PMLAV:

The contractor shall develop a Technical Manual Quality Assurance (TMQA) Plan IAW DI-TMSS-81817 and provide a copy to the Government 30 calendar days after award.

The Government has 15 calendar days to review and provide comments.

The contractor shall provide the Government with a copy of the results generated from the quality reviews monthly.

The contractor shall update the TMQA program as necessary and provide the Government with an updated copy within 5 business days.

Contractor format is acceptable.

All submissions shall be electronic, and readable by computers running Microsoft Windows or as arranged in writing with PCO.

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A028

2. TITLE OF DATA ITEM: Engineering Change Proposal (ECP)

3. SUBTITLE: Technical Report

4. AUTHORITY: DI-SESS-80639D

5. CONTRACT REFERENCE: C.5.1, C.5.1.1

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: DD

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D – export controlled; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 5

Note: For all FMS related ECPs, please use FMS POCs listed above in Block 14. For all USMC FoV-LAV related ECPs, please use FoV-LAV PCO listed above in Block 14.

16. REMARKS:

Contractor initiated Class I ECPs shall be submitted to the COR for approval. Contractor initiated Class II ECPs that affect Government drawings shall be submitted to PCO for approval. Class II ECPs that do not affect Government owned drawings shall be submitted to the onsite DND QAR for information purposes only. The Contractor shall give its recommendation for each ECP to TDP effect and provide COR information if such TDP needs to be incorporated in to the variant TDP.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

1. DATA ITEM NO. A029

2. TITLE OF DATA ITEM: Modification Instructions (MI) or USMC I-Type Publications

3. SUBTITLE:

4. AUTHORITY: MIL-DTL 28999C (USMC/PM-LAV/FMS)

5. CONTRACT REFERENCE: C.8.14.6

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 6

16. REMARKS:

At the request of the COR, the contractor shall submit Modification Instructions for approved ECPs. Shall be used as a guide DI-CMAN-80529.

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

The below information applies to USMC-PMLAV:

The contractor shall develop, validate, and deliver the MI IAW the MIL-DTL 28999C and MCSC I-Type Template.

1. DATA ITEM NO. A030 RESERVED

1. DATA ITEM NO. A031

2. TITLE OF DATA ITEM: Draft / Final IETM

3. SUBTITLE:

4. AUTHORITY: MIL-STD-38784/DI-TMSS-81814 (FMS) / MIL-STD-40051-1C/MIL-STD-40051-2C/MIL-PRF-32436/MIL-STD-38784/DI-TMSS-81814 (USMC/PM-LAV)

5. CONTRACT REFERENCE: C.8.14.4

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

15. TOTAL: 6

Note: For all FMS related ECPs, please use FMS POCs listed above in Block 14. For all USMC FoV-LAV related ECPs, please use FoV-LAV PCO listed above in Block 14.

16. REMARKS: The below information applies to USMC-PMLAV:

The contractor shall develop, validate, and deliver the Interactive Electronic Technical Manual (IETM) IAW MIL-STD-40051-1C, guidance found in MIL-HDBK-1222F, MIL-HDBK-2361D Document Type Definition, and Style Sheets available at https://www.logsa.army.mil/mil40051/menu.cfm (Links; Document Type Definition (DTD) for MIL-STD-40051 and Style Sheets for MIL-STD-40051). The Contractor shall ensure IETMs are compatible with IADS/DS software and capable of viewing on a standalone laptop computer with IADS/DS loaded. The Contractor shall obtain IADS/DS software required for the development using the following link: IADS HELPDESK: usarmy.redstone.amcom.mbx.immc-pub-iads-support@mail.mil.

(1) VERIFICATION DRAFT EQUIPMENT PUBLICATION/PRELIMINARY TECHNICAL MANUAL (DEP/PTM). Contractor shall deliver one (1) electronic copy of the validated IETM on Digital Video Disc (DVD) and one (1) complete set of XML source files (including all illustrations [Computer Graphics Metafile (CGM)] on DVD within 60 calendar days after start of the contract. The validated IETM shall be representative of the final product and shall be in the same format as the Final Reproducible Copy (FRC). The Government will review the Verification DEP/PTM and provide comments. The contractor shall incorporate any Government comments and re-deliver one (1) electronic copy of the updated Verification DEP/PTM on DVD within 30 calendar days of receipt of Government comments. The review process of the Verification DEP/PTM will continue until the Government accepts a Verification DEP/PTM submission.

(2) FINAL DRAFT EQUIPMENT PUBLICATION (FDEP). Contractor shall deliver one (1) electronic copy of the IETM on Digital Video Disc (DVD) within 60 calendar days after completion of Government Verification. The contractor shall incorporate all DEP/PTM review and verification corrections, changes and additions in the FDEP. If the contractor changes content that was not included in the Verification master mark-up, they shall identify those changes. The Government will review the FDEP and provide comments. The contractor shall incorporate any Government comments and re-deliver one (1) electronic copy of the updated FDEP on DVD within 30 calendar days of receipt of Government comments. The review process of the FDEP will continue until the Government accepts an FDEP submission.

(3) FINAL REPRODUCIBLE COPY (FRC). Contractor shall deliver one (1) electronic copy of the IETM on Digital Video Disc (DVD) no later than 30 calendar days after Government acceptance of the FDEP. FRC shall include the final resolution of all comments and recommendations made by the Government as a result of testing, Government review(s), results from the contractor validation, Government verification and maintenance literature review(s). Source file DVDs shall be delivered as follows: one (1) DVD containing IETM source files and one (1) DVD containing source data illustration files (Computer Graphics Metafile (CGM)) for the IETM. The Contractor shall grant the Government unlimited rights to use any and all publications data/products produced under this DO.

1. DATA ITEM NO. A032

2. TITLE OF DATA ITEM: Software Test Plan (STP)

3. SUBTITLE:

4. AUTHORITY: DI-IPSC-81438A

5. CONTRACT REFERENCE: C.7.5.3

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 Umair Chughtai Umair.n.chughtai.civ@mail.mil 1 DCMA ACO DCMA-Canada London 1

15. TOTAL: 4

16. REMARKS:

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A033

2. TITLE OF DATA ITEM: Software Test Description (STD)

3. SUBTITLE:

4. AUTHORITY: DI-IPSC-81439A

5. CONTRACT REFERENCE: C.7.5.4

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 Umair Chughtai Umair.n.chughtai.civ@mail.mil 1 DCMA ACO DCMA-Canada London 1

15. TOTAL: 4

16. REMARKS:

1. DATA ITEM NO. A034

2. TITLE OF DATA ITEM: Software Test Report (STR)

3. SUBTITLE:

4. AUTHORITY: DI-IPSC-81440A

5. CONTRACT REFERENCE: C.7.5.5

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 Umair Chughtai Umair.n.chughtai.civ@mail.mil 1 DCMA ACO DCMA-Canada London 1

15. TOTAL: 4

16. REMARKS:

Blocks 10, 12, and 13 will be specified in the WD.

Shall be delivered electronically in contractor format.

1. DATA ITEM NO. A035

2. TITLE OF DATA ITEM: COURSE CONDUCT INFORMATION PACKAGE

3. SUBTITLE:

4. AUTHORITY: DI-PSSS-81522C

5. CONTRACT REFERENCE: C.10.1

6. REQUIRING OFFICE: AMSTA-MSS-S

7. DD250 REQ: No

8. APP CODE: N/A

9. DIST. STATEMENT REQUIRED: Distribution Code D; See Block 16

10. FREQUENCY: Block 16

11. AS OF DATE: N/A

12. DATE OF FIRST SUBMISSION: ASREQ

13. DATE OF SUBS.SUB: Block 16

14. DISTRIBUTION ADDRESSEES FINAL

Ashis Patel ashis.s.patel.civ@mail.mil 1 KSA MAIL BOX usarmy.detroit.peo-gcs.mbx.ksa-m1a2s@mail.mil 1 Umair Chughtai Umair.n.chughtai.civ@mail.mil 1 DCMA ACO DCMA-Canada London 1

15. TOTAL: 4

16. REMARKS:

Blocks 10, 12, and 13 will be specified in the WD.

File details come from the government source that posted it. Updated Dec 20, 2019.