FMTK_-_W56HZV-16-R-0104_RFP_Question_and_Answer_-_Set_1.docx

FMTK – W56HZV-16-R-0104 RFP Question and Answer – Set 1

Q1: CLIN 002 NETWORK REMOVAL TOOL - We believe this is meant to be a Network Analyzer (NSN 6625-01-644-8382). Can you confirm or give more details on the Removal Tool? Section D.1.2 references a quantity of 108 Analyzer, Network A1: Network Removal Tool is being removed all together as we are providing this as GFM. Reference under D.1.2 for the Network Removal Tool is also removed. Please see Solicitation W56HZV-16-R-0104 Amendment 01.

Q2: CLIN 003 M8x1.25 THREAD - We believe this should be M8x1.25x30 HHCS. Can you confirm or provide more details?

A2: Amendment 01 updated CLIN title to read - M8x1.25x 30 mm. Change Noun to Flange Head Cap Screw.

Q3: FOB POINT: Destination - Will all deliverables (other than prototype kit) be going to Letterkenny?

A3: Yes, all 49 kits will be going to LEAD and 1 prototype after USG approval.

Q4: Section C.1 General references a foam cutout example and Tool Locator Guide in Attachment 2, but none is shown.

A4: Amendment 01 will update the SOW C.1 to remove references to Attachment 2.

Q5: Attachment 0001 page 2 Government Furnished Parts list does not match the list in Section C.3.1.3 Government Furnished Material (GFM). Please clarify which list is correct.

A5: Amendment 01 will update Attachment 0001 and removes the reference to GFM components as those are provided under Attachment 0002 and matches C.3.1.3.

Q6: PIIN 0002AA describes the Supplies/Service as “NETWORK REMOVAL TOOL” – Could you provide a part number and description for this item.

A6: Amendment 01 is removing CLIN 0002AA all together.

Q7: PIIN 0003AA describes the Supplies/Service as “M8x1.25x THREAD 30 mm” – Is this a Nut or Screw? What is the length?

A7: Screw, 30mm

Q8: CLIN numbering – CLINs on page 3 and 35 do not match CLINs on page 5-9 A8: Amendment 01 will be issued to revise the narrative on page 4 to match the CLINs.

Q9: Delivery Schedule – page 4 and page 35 state CLIN 0001AA 120 days, but page 23 D.1.1.1 states 90 days A9: Amendment 01 will be issued to revise D.1.1.1 to 120 days after contract award. Deliveries under CLIN 0001AB will still be 180 days after contract award.

Q10: Section C.1 General – Is the reserved 12x12 area of foam tray a cut-out or solid? (This may be answered by previously submitted question 4) A10: The space should be reserved but not cut. Just keep a 12x12 space available as part of the foam.

Q11: Section C.6.1 states I/A at destination, but page 5 says origin A11: Inspection/Acceptance is at Destination. Amendment 01 will be issued to revise CLIN 0001AA for Inspection and Acceptance at Destination.

Q12: Is the FMTK considered a kit? If so, would it be considered a Special Group type package and meet ASTM D 4169 (per Section C.9.2)?

A12: Yes, the FMTK is a kit and provisioning has taken place and all should have a Source, Maintenance & Recoverability (SMR) code and all special packaging data shall be developed in accordance with MIL-STD-2073-1D.

Q13: Section C.6.2 references MIL-SPEC 4150J. I believe this is obsolete/cancelled.

A13: Amendment 01 will remove Section C.6.2 in its entirety.