W56HZV14R0072-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0002 2015SEP16

W56HZV

U.S. ARMY CONTRACTING COMMAND

WARREN, MICHIGAN 48397-5000

ANGELA TANGALOS

EMAIL: ANGELA.TANGALOS.CIV@MAIL.MIL

W56HZV-14-R-0072

2015AUG10

X

X 2015SEP25 05:00pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 15

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: ANGELA TANGALOS

Buyer Office Symbol/Telephone Number: CCTA-HDT-A/(586)282-7783

Type of Contract 1: Firm Fixed Price

Kind of Contract: System Acquisition Contracts

*** End of Narrative A0000 ***

The purpose of Amendment 0002 on Solicitation W56HZV-14-R-0072 is to incorporate the following changes:

1. Attachment 0002 DFP date has been revised.

FROM: DFP ECB-075

31 August 2015

TO: DFP ECB-075

15 September 2015

2. The Solicitation has been extended.

FROM: 18 September 2015 5:00 P.M. EASTERN TIME

TO: 25 September 2015 5:00 P.M. EASTERN TIME

3. The following revision pertains to Item A41, Page number 40 in DFP ECB-075 15 September 2015 has been revised (noted by underline).

FROM: A41. Die And Tap Set, Rethreading. Shall be designed for removing nicks and burrs from damaged standard and metric threads. The set shall contain the following items:

Includes one each of the following:

Rethreading Dies: National Coarse, Inch: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-

12, and 5/8-11

National Fine, Inch: 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/16-18, and 5/8-18

Metric: 6-1.00, 8-1.25, 10-1.00, 10-1.25, 10-1.50, 11-1.50, 12-1.25, 12-1.50, 12-1.75, and 14-1.50

Rethreading Taps:

National Coarse, Inch: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, and 9/16-12

National Fine, Inch: 1/4-26, 5/16-24, 3/8-24 ______

7/16-20, 1/2-20, and 9/16-16 _______

Metric: 6-1.00, 8-1.25, 10-1.00, 10-1.25, 10-1.50, 11-1.50, 12-1.25, 12-1.50, 12- 1.75, and 14-1.50

Rethreading Files: US thread pitch 11 to 24 TPI, Metric thread pitch 75mm to

3.0mm

Storage Case

TO: A41. Die And Tap Set, Rethreading. Shall be designed for removing nicks and burrs from damaged standard and metric threads. The set shall contain the following items:

Includes one each of the following:

Rethreading Dies: National Coarse, Inch: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-

12, and 5/8-11

National Fine, Inch: 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/16-18, and 5/8-18

Metric: 6-1.00, 8-1.25, 10-1.00, 10-1.25, 10-1.50, 11-1.50, 12-1.25, 12-1.50, 12-1.75, and 14-1.50

2 15

W56HZV-14-R-0072 0002

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Rethreading Taps:

National Coarse, Inch: 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, and 9/16-12

National Fine, Inch: 1/4-28, 5/16-24, 3/8-24 ______

7/16-20, 1/2-20, and 9/16-18 _______

Metric: 6-1.00, 8-1.25, 10-1.00, 10-1.25, 10-1.50, 11-1.50, 12-1.25, 12-1.50, 12- 1.75, and 14-1.50

Rethreading Files: US thread pitch 11 to 24 TPI, Metric thread pitch 75mm to 3.0mm

Storage Case

4. The following revision pertains to Item A42, Page number 40-41 in DFP ECB-075 15 September 2015 has been revised (noted by underline).

FROM: A42. Die and Tap Set, Thread. The set shall have 34 fractional #4 to 1/2 and 1/8-27 NPT. It shall have 34 pieces from 3 mm to 12 mm and 1/8-28 BSP. It shall have 36 HSS drill bits and 5 extractors. Carrying case shall be included.

Includes one each of the following:

Machine Screw Hand Tap and Die (1 Pair EA): 4-40 NC, 6-32 NC, 8-32

NC, 10-24 NC,10-32 NF, 12-24 NC

Fractional-size Hand Tap and Die (1 Pair EA): 1/4 -20 NC, 1/4 -28 NF, 5/16-

18 NC, 5/16-24 NF, 3/5-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 ______

NC, 1/2-20 NF

Inch Straight Pipe Hand Tap and Die (1 Pair): 1/8-27 NPT

Metric Machine Thread Hand Tap and Die (1 Pair EA): 3mm -0.5, 4mm-

0.7, 4mm-0.75,5mm-0.8, 5mm-0.9, 6mm-1

Metric Hand Taps and Dies (1 Pair EA): 7mm-1.0, 8mm-1.0, 8mm-1.25, 9mm-1.0,9MM-1.25, 10mm-1.5, 11mm-1.5, 12mm-1.5, and 12mm-1.75

Metric Straight Pipe Hand Tap and Die (1 Pair): 1/8-28 BSP

Spiral Flute Screw Extractors (1 EA by Drill Bit Size): 5/64, 7/64, 55/27, 1/4, and19/64 _____

Drive Tools (1 EA): Plain die stock for 5/8 hex dies, Adjustable die stock, Adjustable handle tap wrench, T-handle wrench, #0 to 1/4 Taps, and

T-handle wrench, 1/4 to 1/2 Taps

HSS Drill Bits (1 EA by Size & Style):

Wire Gage#: 3, 7, 9, 16, 19, 20, 21, 25, 29, 30, 36, 30, and 43 __

Letter: B, J, H, O, S, R, Z, I, Q, and U

Inch: 5/16, 3/8, 13/32, 21/64, 25/64, 27/64, 29/64, 5/64, 7/64, 5/32, 1/4 and

19/64 Accessories (1 EA): Pitch gauge, metric; Pitch gauge, SAE;

Screwdriver; Carrying Case

TO: A42. Die and Tap Set, Thread. The set shall have 34 fractional #4 to 1/2 and 1/8-27 NPT. It shall have 34 pieces from 3 mm to 12 mm and 1/8-28 BSP. It shall have 36 HSS drill bits and 5 extractors. Carrying case shall be included.

Includes one each of the following:

Machine Screw Hand Tap and Die (1 Pair EA): 4-40 NC, 6-32 NC, 8-32

NC, 10-24 NC,10-32 NF, 12-24 NC

Fractional-size Hand Tap and Die (1 Pair EA): 1/4-20 NC, 1/4-28 NF, 5/16-

18 NC, 5/16-24 NF, 3/8-16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 _______

NC, 1/2-20 NF

Inch Straight Pipe Hand Tap and Die (1 Pair): 1/8-27 NPT

Metric Machine Thread Hand Tap and Die (1 Pair EA): 3mm -0.5, 4mm-

0.7, 4mm-0.75,5mm-0.8, 5mm-0.9, 6mm-1

Metric Hand Taps and Dies (1 Pair EA): 7mm-1.0, 8mm-1.0, 8mm-1.25, 9mm-1.0,9MM-1.25, 10mm-1.5, 11mm-1.5, 12mm-1.5, and 12mm-1.75

Metric Straight Pipe Hand Tap and Die (1 Pair): 1/8-28 BSP

Spiral Flute Screw Extractors (1 EA by Drill Bit Size): 5/64, 7/64, 5/32, 1/4, and 19/64 ____

3 15

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Drive Tools (1 EA): Plain die stock for 5/8 hex dies, Adjustable die stock, Adjustable handle tap wrench, T-handle wrench, #0 to \'bc Taps, and

T-handle wrench, 1/4 to 1/2 Taps

HSS Drill Bits (1 EA by Size & Style):

Wire Gage#: 3, 7, 9, 16, 19, 20, 21, 25, 29, 30, 36, 39, and 43 __

Letter: B, J, H, O, S, R, Z, I, Q, and U

Inch: 5/16, 3/8, 13/32, 21/64, 25/64, 27/64, 29/64, 5/64, 7/64, 5/32, 1/4 and

19/64 Accessories (1 EA): Pitch gauge, metric; Pitch gauge, SAE;

Screwdriver; Carrying Case

5. The following revision pertains to Item A61, Page number 45 in DFP ECB-075 15 September 2015 has been revised (noted by underline).

FROM: A61. Fountain, Eye and Face.

SPECIFICATION: ISEA Z358.1

Tank Material: Stainless Steel

Tank Capacity: 6 gallons _

Features: Pressurized

Includes: 5 foot minimum hand held drench hose and nozzle

TO: A61. Fountain, Eye and Face.

SPECIFICATION: ISEA Z358.1

Tank Material: Stainless Steel

Tank Capacity: 5 gallons _

Features: Pressurized

Includes: 5 foot minimum hand held drench hose and nozzle

6. The following revision pertains to Item A89, Page number 53 in DFP ECB-075 15 September 2015 has been revised (noted by underline).

FROM: A89. Lift, Transmission and Differential.

Type: Heavy Duty, Manual/Hydraulic

Lifting Capacity: 2000 pounds minimum

Maximum Lifting Height: 34 inches

Minimum Lifting Height: 8 inches

Handle Length: 44 1/2 inches nominal _______

Tilt Capacity Front/Rear/Side: 10 degrees

Inlet Air Pressure Range: 90 to 200 psi

Base Size: 28-1/4 inches by 44-1/2 inches nominal

Accessories: chains, wedges, clamps, bars, brackets, and other saddle attachments

TO: A89. Lift, Transmission and Differential.

Type: Heavy Duty, Manual/Hydraulic

Lifting Capacity: 2000 pounds minimum

Maximum Lifting Height: 34 inches

Minimum Lifting Height: 8 inches

Handle Length: 24 1/4 inches nominal ______

Tilt Capacity Front/Rear/Side: 10 degrees

Inlet Air Pressure Range: 90 to 200 psi

Base Size: 28-1/4 inches by 44-1/2 inches nominal

Accessories: chains, wedges, clamps, bars, brackets, and other saddle attachments

4 15

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

7. The following revision pertains to Item A115, Page number 60 in DFP ECB-075 15 September 2015 has been revised (noted by underline).

FROM: A115. Punch and Chisel Set. Shall consist of 26 pieces, as listed in the table below.

ASME B107.500 (B107.48)

Material: S2 Hardened Steel

Finish: Black Oxide

Quantity: 26

Includes one each of the following:

Cold Chisel: 3/4 by 6-1/2 long; 1/4 by 4 long; 5/16 by 4 long; 3/8 by 5 long; 1/2 by 5-3/4 long; 5/8 by 6 long; 7/8 by 7-

1/2 long; 1 by 8 long; 1-3/16 by 9 long Drive Pin Punch:

3/32; 1/8; 5/32; 3/16; 7/32; 1/4

Tip Drift Punch: 1/8 by 8 long; 3/16 by 8 long; 1/4 by 8-1/2 long

Tip Starting Punch: 3/32; 1/8; 3/16; 7/32; 1/4

Center Punch: #2 (5/16 Body) Center Punch, length 3-1/4 minimum; #7 ____

(3/8 Body)

Center Punch, length 4 minimum

Prick Punch: #3 (1/2 Body) Prick Punch, length 5 minimum

Carrying Case

TO: A115. Punch and Chisel Set. Shall consist of 26 pieces, as listed in the table below.

ASME B107.500 (B107.48)

Material: S2 Hardened Steel

Finish: Black Oxide

Quantity: 26

Includes one each of the following:

Cold Chisel: 3/4 by 6-1/2 long; 1/4 by 4 long; 5/16 by 4 long; 3/8 by 5 long; 1/2 by 5-3/4 long; 5/8 by 6 long; 7/8 by 7-

1/2 long; 1 by 8 long; 1-3/16 by 9 long Drive Pin Punch:

3/32; 1/8; 5/32; 3/16; 7/32; 1/4

Tip Drift Punch: 1/8 by 8 long; 3/16 by 8 long; 1/4 by 8-1/2 long

Tip Starting Punch: 3/32; 1/8; 3/16; 7/32; 1/4

Center Punch: #2 (1/2 Body) Center Punch, length 3-1/4 minimum; #7 ___

(3/8 Body)

Center Punch, length 4 minimum

Prick Punch: #3 (5/16 Body) Prick Punch, length 5 minimum

Carrying Case

8. The following revision pertains to Item A151, Page number 70 in DFP ECB-075 15 September 2015 has been revised (noted by underline).

FROM: A151. Tool Kit, Screw Insert. The kit shall contain self-tapping threaded inserts for repair of stripped threaded holes in steel and aluminum with a variety of sizes and thread types, both inch and metric, as well as the requisite drill bits and insertion tools.

Type: Self-tapping threaded inserts

Includes:

Inserts, Inch sizes: (12 ea) 1/4-20; (6 ea) 1/4-28; (12 ea) 5/16-

18; (6 ea) 5/16-24; (12 ea) 3/8-16; (6 ea) 3/8-24; (12 ea)

7/16-14; (6 ea) 7/16-20; (12 ea) 1/2-13; (6 ea) 1/2-20; (6 ea)

9/16-12; (3 ea) 9/16-18; (6 ea) 5/8-11; (6 ea) 3/4-10

Inserts, Metric sizes: (12 ea) 6mm-1.0; (12 ea) 8mm-1.25;

(12) 10mm-1.5; (12) 12mm-1.75; (6) 14mm-2

Drill Bit sizes: (1 ea) 23/64 inch; (1 ea) S; (1 ea) 299/64 inch; _______

(1 ea) 7/16 inch; (1 ea) 17/32 inch; (1 ea) 39/64 inch; (1 ea)

19/32 inch; (1 ea) 45/64 inch; (1 ea) 11/16 inch; (1 ea) 25/32 inch;

(1 ea) 49/64inch; (1 ea) 55/64 inch; (1 ea) 1-1/32 inch; (1 ea) 1-1/64 inch

Bolt Gage

Tapping Fluid and Carrying Case

5 15

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

TO: A151. Tool Kit, Screw Insert. The kit shall contain self-tapping threaded inserts for repair of stripped threaded holes in steel and aluminum with a variety of sizes and thread types, both inch and metric, as well as the requisite drill bits and insertion tools.

Type: Self-tapping threaded inserts

Includes:

Inserts, Inch sizes: (12 ea) 1/4-20; (6 ea) 1/4-28; (12 ea) 5/16-18;

(6 ea) 5/16-24; (12 ea) 3/8-16; (6 ea) 3/8-24; (12 ea)

7/16-14; (6 ea) 7/16-20; (12 ea) 1/2-13; (6 ea) 1/2-20; (6 ea)

9/16-12; (3 ea) 9/16-18; (6 ea) 5/8-11; (6 ea) 3/4-10

Inserts, Metric sizes: (12 ea) 6mm-1.0; (12 ea) 8mm-1.25;

(12) 10mm-1.5; (12) 12mm-1.75; (6) 14mm-2

Drill Bit sizes: (1 ea) 23/64 inch; (1 ea) S; (1 ea) 29/64 inch; _____

(1 ea) 7/16 inch; (1 ea) 17/32 inch; (1 ea) 39/64 inch;

(1 ea) 19/32 inch; (1 ea) 45/64 inch; (1 ea) 11/16 inch; (1 ea) 25/32 inch;

(1 ea) 49/64inch; (1 ea) 55/64 inch; (1 ea) 1-1/32 inch; (1 ea) 1-1/64 inch

Bolt Gage

Tapping Fluid and Carrying Case

9. The following revision pertains to Item A170, Page number 75 in DFP ECB-075 15 September 2015 has been revised (noted by underline).

FROM: A170. Wrench Set, Master, Impact Wrench, 3/8 & 1/2

Drive.

Material: Steel

Finish: Chrome ______

Quantity: 97

Includes:

1/2 inch drive:

Electric Impact Wrench, reversible, 300 ft-lbs torque, 120 V, 60 Hz, single-phase

Pneumatic Impact Wrench, reversible, 1/4 inch NPT inlet, handle exhaust, 400 to 600 ft-lbs torque, includes a male 3/8 inch quick disconnect fitting

Double-End Socket: 3/4 x 13/16 inch

Extensions: 3 inch; 6 inch; 10 inch

Universal Joint

Adapter: 3/8 inch male to 1/2 inch female

Inch Impact Sockets, 6 point, standard length: 1/4, 5/16, 3/8, 7/16, \'bd, 9/16, 5/8, 11/16, and 3/4 inch

Metric Impact Sockets, 6 point, standard length: 10mm, 11mm,12mm, 13mm,14mm, 15mm, 16mm, 17mm, 18mm and 19mm

Inch Impact Sockets, 6 point, standard length: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,13/16, 7/8, 15/16, 1, and 1-1/16 inch

Metric Impact Sockets, 6 point, standard length: 12mm, 13mm, 14mm, 15mm,16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm and 27mm

Inch Impact Sockets, 6 point, deep length: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, and 1-1/16 inch

Metric Impact Sockets, 6 point, deep length: 12mm, 13mm, 14mm, 15mm, 16mm,17mm, 18mm, 19mm, 21mm, 22mm, 24mm and 27mm

3/8 inch drive:

Extensions: 3 inch; 6 inch

Universal Joint

Inch Impact Sockets, 6 point, deep length: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4 inch

Metric Impact Sockets, 6 point, deep length: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm

6 15

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

TO: A170. Wrench Set, Master, Impact Wrench, 3/8 & 1/2 Drive.

Material: Steel

Finish: Black Oxide ___________

Quantity: 97

Includes:

1/2 inch drive:

Electric Impact Wrench, reversible, 300 ft-lbs torque, 120 V, 60 Hz, single-phase

Pneumatic Impact Wrench, reversible, 1/4 inch NPT inlet, handle exhaust, 400 to 600 ft-lbs torque, includes a male 3/8 inch quick disconnect fitting

Double-End Socket: 3/4 x 13/16 inch

Extensions: 3 inch; 6 inch; 10 inch

Universal Joint

Adapter: 3/8 inch male to 1/2 inch female

Inch Impact Sockets, 6 point, standard length: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4 inch

Metric Impact Sockets, 6 point, standard length: 10mm, 11mm,12mm, 13mm,14mm, 15mm, 16mm, 17mm, 18mm and 19mm

Inch Impact Sockets, 6 point, standard length: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4,13/16, 7/8, 15/16, 1, and 1-1/16 inch

Metric Impact Sockets, 6 point, standard length: 12mm, 13mm, 14mm, 15mm,16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm and 27mm

Inch Impact Sockets, 6 point, deep length: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, and 1-1/16 inch

Metric Impact Sockets, 6 point, deep length: 12mm, 13mm, 14mm, 15mm, 16mm,17mm, 18mm, 19mm, 21mm, 22mm, 24mm and 27mm

3/8 inch drive:

Extensions: 3 inch; 6 inch

Universal Joint

Inch Impact Sockets, 6 point, deep length: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4 inch

Metric Impact Sockets, 6 point, deep length: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm

10. The following revision pertains to Item A171, Page number 76 in DFP ECB-075 15

September 2015 has been revised (noted by underline).

FROM: A171. Wrench Set, Impact Socket, 3/4 Drive, Inch. Shall be a set of standard-length 6-point, 3/4 drive impact sockets.

Material: Steel

Finish: Chrome ______

Drive Size: 3/4 inch

Quantity: 15

Includes: 6.5 inch extension; 12.5 inch extension; Impact Sockets, 6 point, standard length: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 1, 1-1/16, 1-1/8, 1-1/4, 1-

5/16, 1-7/16 and 1-1/2 inch

TO: A171. Wrench Set, Impact Socket, 3/4 Drive, Inch. Shall be a set of standard-length 6-point, 3/4 drive impact sockets.

Material: Steel

Finish: Black Oxide ___________

Drive Size: 3/4inch

Quantity: 15

Includes: 6.5 inch extension; 12.5 inch extension; Impact Sockets, 6 point, standard length: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 1, 1-1/16, 1-1/8, 1-1/4, 1-

5/16, 1-7/16 and 1-1/2 inch

7 15

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

11. The following revision pertains to Item A175, Page number 77 in DFP ECB-075 15

September 2015 has been revised (noted by underline).

FROM: A175. Wrench, Adjustable, Automotive, 11. Shall have worm drive adjustment.

Type: Automotive, Adjustable

Length: 11 inch nominal

Jaw Type: Perpendicular to handle

Jaw Capacity: 4-3/8 inches nominal ______

Jaw Depth: 1 1/2 inches nominal

Material: Steel

Finish: Chrome

TO: A175. Wrench, Adjustable, Automotive, 11. Shall have

A worm drive adjustment.

Type: Automotive, Adjustable

Length: 11 inch nominal

Jaw Type: Perpendicular to handle

Jaw Capacity: 3 inches nominal _

Jaw Depth: 1 1/2 inches nominal

Material: Steel

Finish: Chrome

12. There are no other changes as a result of this Amendment. All other terms and conditions remain in full force and effect.

*** END OF NARRATIVE A0002 ***

8 15

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS

0011 FIRST ORDERING PERIOD $ $ _____________________ ______________ __________________

NSN: 4910-01-531-2053

COMMODITY NAME: SATS STURDY MOBILE

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 5B5M3

Mfr Part Number: DFP ECB-075

Description/Specs./Work Statement _________________________________

TOP DRAWING NR: 15SEPT2015

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE PACKAGING REQUIREMENTS CLAUSE

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

9 15

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0012 SECOND ORDERING YEAR $ $ ____________________ ______________ __________________

NSN: 4910-01-532-053

COMMODITY NAME: SATS STURDY MOBILE

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 5B5M3

Mfr Part Number: DFP ECB-075

Description/Specs./Work Statement _________________________________

TOP DRAWING NR: 15SEPT2015

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE PACKAGING REQUIREMENTS CLAUSE

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

10 15

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0013 THIRD ORDERING YEAR $ $ ___________________ ______________ __________________

NSN: 4910-01-532-053

COMMODITY NAME: SATS STURDY MOBILE

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 5B5M3

Mfr Part Number: DFP ECB-075

Description/Specs./Work Statement _________________________________

TOP DRAWING NR: 15SEPT2015

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE PACKAGING REQUIREMENTS CLAUSE

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

11 15

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0014 FOURTH ORDERING YEAR $ $ ____________________ ______________ __________________

NSN: 4910-01-532-053

COMMODITY NAME: SATS STURDY MOBILE

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 5B5M3

Mfr Part Number: DFP ECB-075

Description/Specs./Work Statement _________________________________

TOP DRAWING NR: 15SEPT2015

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE PACKAGING REQUIREMENTS CLAUSE

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

12 15

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

0015 FIFTH ORDERING YEAR $ $ ___________________ ______________ __________________

NSN: 4910-01-532-053

COMMODITY NAME: SATS STURDY MOBILE

CLIN CONTRACT TYPE:

Firm Fixed Price

Mfr CAGE: 5B5M3

Mfr Part Number: DFP ECB-075

Description/Specs./Work Statement _________________________________

TOP DRAWING NR: 15SEPT2015

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE PACKAGING REQUIREMENTS CLAUSE

LEVEL PRESERVATION: Commercial

LEVEL PACKING: Commercial

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

13 15

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

14 15

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION J - LIST OF ATTACHMENTS

List of Number List of Number

Addenda Title Date of Pages Transmitted By Addenda Title Date of Pages Transmitted By________________ ____________________________________________________________ _______________ ____________ _______________________________ ____________________________________________________________ _______________ ____________ _______________

Attachment 0001 DESCRIPTION FOR PURCHASE ECB-075 15-SEP-2015 085 DATA

15 15