Electrical Plan_Part 1.pdf

This document is a set of electrical design drawings for a federal facility renovation project. The drawings provide detailed specifications for electrical systems across multiple buildings and floor areas.

The electrical plans include comprehensive schematics for lighting, power distribution, and special systems across four main building areas: Management Building (First and Second Floor Plans, Areas A and B), Support Services Building (Floor Plans, Areas A and B), and Enforcement Building (Floor Plans, Areas A and B). The drawings specify recessed and surface-mounted lighting fixtures, wall-mounted and ceiling-mounted fixtures, emergency lighting systems, and fire alarm control panels. Power distribution plans detail electrical receptacles, panels, transformers, and conduit routing throughout each building section. Special systems plans address communication systems, access control, data systems, and security monitoring infrastructure. General notes on each drawing provide coordination requirements with architectural details, reference to site plans for conduit routing schedules, and instructions for fixture placement and installation. Key notes identify specific installation requirements such as mounting heights, wire gauges, grounding specifications, and connections to building systems. The electrical legend on the first sheet defines all symbols used throughout the drawing set, including fixture types, switch configurations, panel designations, and circuit indicators. Conduit rough-in schedules specify the location, size, and routing of electrical conduits throughout the buildings. All drawings are prepared at scales ranging from 1/8 inch to 1/4 inch per foot and are numbered E-001 through E-120 in the series.