SPI AM13100573.pdf
PDF 262 KB Posted
- Solicitation number
- W52P1J-22-R-0001
About this file
This document provides details for a federal solicitation seeking proposals for parachute assemblies to support various artillery and mortar illumination ammunition and flash bang munition requirements. The United States Army Contracting Command - Rock Island is requesting proposals on behalf of the Office of the Project Manager for Combat Ammunition Systems to provide 60mm, 81mm, 120mm, 105mm, 155mm (main and drogue) parachutes for illumination ammunition as well as 81mm flash bang munition parachutes. The award will support U.S. Army, U.S. Marine Corps, and potential Foreign Military Sales needs. The contractor(s) will be responsible for providing all required material, equipment, and facilities. The solicitation is designated as a 100% small business set-aside and will result in the award of up to two firm fixed price Indefinite Delivery Indefinite Quantity contracts with five one-year ordering periods to support requirements.
View the file
Other files
Show all 34
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Executive Services Directorate, Information
Management Division, 4800 Mark Center Drive, Alexandria, VA 22350-3100 (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
13100573 PARACHUTE ASSEMBLY 19200 AM13100573
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
220713 -/R22K20##
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
50/EA 11.4 1.688 21.3 X 8.3 X 16.5
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION
1 5
DESICCANT: MIL-D-3464, TYPE II, 1/3 UNIT, SEE
NOTE A. MIL-STD-2073-1, METHOD 51***
13. CLEANING 2 5 BAG: MIL-DTL-117, TYPE I, CLASS E, SEE NOTE B.
3 1
CONTAINER: ASTM D5118/D5118M, I.D. 21.0 X 8.0
X 16.0, SEE NOTE C. 14. DRYING
4 AR
CLOSURE: ASTM D1974/D1974M, SEALING
METHOD B 15. PACKING
a. LEVEL A
MIL-STD-2073-1
b. LEVEL B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREON OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH SPECIFICATION MIL-STD-2073-1 OR
AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. INSPECTIONS, QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH APPENDIX G OF MIL-STD-2073-1, OR AS OTHERWISE
SPECIFIED.
* PACKAGING ITEMS SHALL BE CLEANED AND DRIED BY ANY PROCESS OR PROCESSES THAT ARE NOT INJURIOUS TO THE ITEM. IN ADDITION, ALL ITEMS SHALL PASS THE CLEANING AND DRYING REQUIREMENTS OF MIL-STD-2073-1 AND
DRAWING 13042429.
**THE ACTUAL UNIT PACK SIZE, WEIGHT, AND CUBE MAY VARY DUE TO THE SIZE AND SHAPE OF THE APPROVED UNIT
PACK AND CONTAINER.
***HUMIDITY INDICATOR MAY BE OMITTED.
A. DESICCANT QUANTITY SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1 AND SIZE OF BAG. IF BAG SIZE IS DIFFERENT FROM RECOMMENDED SIZE, DESICCANT QUANTITY SHALL BE RECALCULATED IN ACCORDANCE WITH
MIL-STD-2073-1.
B. CONSOLIDATE TEN (10) PARUCHUTE ASSEMBLIES PER BARRIER BAG, INSERT DESICCANT, EXHAUST AS MUCH AIR AS POSSIBLE, AND HEAT SEAL. MARK EACH BAG WITH NOMENCLATURE, PART NUMBER, QUANTITY, LOT NUMBER, CONTRACTOR’S NAME, AND CONTRACT NUMBER. RECOMMENDED BAG SIZE IS 24.0 X 9.0.
C. PACK FIVE(5) BAGS IN BOX IN A SERIES OF ROWS TO AVOID DISTORTION OF PARACHUTE ASSEMBLIES.
D. ON EACH COMPLETE UNITIZED LOAD, SECURE ANTI-STACK PYRAMID (13018950) TO TOP OF LOAD PER
MANUFACTURER RECOMMENDATIONS.
WSC: YQ ITEM SIZE: 5.25 X 3.2 X 3.2 ITEM WEIGHT: 0.19 APPROVED: ADRIEN GARCEAU
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 1 Pages
File details come from the government source that posted it. Updated .