Attachment_0012_-_Statistical_Process_Control_(SPC)_Tables.pdf

62 KB Posted

Attached to
AMMUNITION, OVER 30MM UP TO 75MM
Solicitation number
W52P1J16R0060
Issued by

View the file

Other files

File Type Posted
W52P1J16R0060-0004.pdf PDF
Exhibit_A_-_Contract_Data_Requirements_List_(CDRL)_Rev_A.pdf PDF
W52P1J16R0060-0003.pdf PDF
W52P1J16R0060-0001.pdf PDF
Attachment_0004_-_OPSEC_ACQUISITIONS_PLAN.pdf PDF
Attachment_0010_-_Government_Point_of_Contact_listing.pdf PDF
W52P1J16R0060.pdf PDF
Attachment_0008_-_DD1694_-_Request_for_Variance_(RFV).pdf PDF
Attachment_0006_-_Address_List.pdf PDF
Attachment_0002_-_Past_Performance_Questionnaire.docx DOCX document
Attachment_0011_-_52.246-4520_End_Item_Component_Listing.pdf PDF
Attachment_0007_-_DD1692_-_Engineering_Change_Proposal_(ECP).pdf PDF
Attachment_0001_-_Price_Evaluation_Spreadsheet.xls XLS spreadsheet
Attachment_0003_-_Disclosure_of_Lobbying_Activities.pdf PDF
Exhibit_A_-_Contract_Data_Requirements_List_(CDRL).pdf PDF
Attachment_0005_-_Address_Code_Distribution_for_ECP-RFV-VECP.pdf PDF
Attachment_0009_-_DD1695_-_Notice_of_Revision_(NOR).pdf PDF
Show all 17

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Rock Island Statistical Process Control (SPC) Requirements

The contractor shall consider the below SPC requirements as well as any additional SPC when establishing his bid for this solicitation. At a minimum the following characteristics shall be subjected to the application of SPC techniques as identified:

M24 HOUSING Drawing # 11726795

Characteristics for SPC Control Charting – MIL-DTL-48425B

Paragraph/ Characteristic

Examination or Test Type of Charting

4.4.2.4/101 Diameter of housing rear of taper X Bar R 4.4.2.4/102 Diameter of knurl X Bar R 4.4.2.4/103 Diameter rear of knurl X Bar R 4.4.2.4/110 Length from rear face to fin seat X Bar R

4.4.2.4/115 Runout of PD of rear thread with pitch diameter of forward thread and front and rear faces

X Bar R

Note 1* Anodizing process Note 1

FIN Drawing # 11726683

4.4.2.5/102 Diameter of fin blades (front end) X Bar R 4.4.2.5/104 Diameter of hub (inside) X Bar R 4.4.2.5/106 Length from front face to rear face of hub X Bar R 4.4.2.5/110* Overall length X Bar R

Note 1: The contractor to provide a description of the process control procedures including the monitoring and charting of applicable parameters.

M24 FIN ASSEMBLY Drawing # 11726889

4.4.2.6/110 Height of fin blade cant (blade 1) X Bar R 4.4.2.6/110 Height of fin blade cant (blade 2) X Bar R 4.4.2.6/110 Height of fin blade cant (blade 3) X Bar R 4.4.2.6/110 Height of fin blade cant (blade 4) X Bar R 4.4.2.6/110 Height of fin blade cant (blade 5) X Bar R 4.4.2.6/110 Height of fin blade cant (blade 6) X Bar R

*Revised 3/2014 when establishing his bid for this solicitation. At a minimum, the following characteristics

M27 Drawing # 11751196 Characteristics for SPC Control Charting – MIL-DTL-48450C

Paragraph

4.4.2.4

101 Runout of forward OD X Bar R 102 Runout of PD of ignition cartridge. thread X Bar R 103 Runout of OD of fin X Bar R 106 True position of ignition cartridge cavity X Bar R 111 Diameter of ignition cartridge cavity X Bar R 112 Diameter of hub forward of blades X Bar R 113 Diameter of counterbore at rear of fin blades X Bar R 114 Diameter of fin blades, (large) X Bar R 115 Diameter of fin blades, (small) X Bar R 116 Depth of ignition cartridge cavity X Bar R 123 Length, total X Bar R 125 Height of fin blade cant (blade 1) X Bar R 125 Height of fin blade cant (blade 2) X Bar R 125 Height of fin blade cant (blade 3) X Bar R 125 Height of fin blade cant (blade 4) X Bar R 125 Height of fin blade cant (blade 5) X Bar R 125 Height of fin blade cant (blade 6) X Bar R

Revised 22 FEB 2017 when establishing his bid for this solicitation. At a minimum the following characteristics

M28 HOUSING - Drawing # 9327833

Characteristics for SPC Control Charting – MIL-DTL-70546A

4.4.2.2/101 Large outside diameter (OD) of housing X Bar R 4.4.2.2/102 Diameter of knurl X Bar R 4.4.2.2/103 Rear OD X Bar R 4.4.2.2/105 Depth of ignition cartridge cavity X Bar R 4.4.2.2/107 Distance from rear face to rear shoulder X Bar R 4.4.2.2/111 Runout of large OD with forward thread and forward shoulder X Bar R 4.4.2.2./112 Runout of rear OD with forward thread and forward shoulder X Bar R 4.4.2.2/121 Diameter of cartridge cavity X Bar R 4.4.2.2/125 Length of knurl X Bar R

FIN – Drawing # 9327834/9381092

4.4.2.3/102 Large OD of fin blades X Bar R 4.4.2.3/105 Diameter of hub X Bar R 4.4.2.3/106 Distance from front face to start of rear OD X Bar R 4.4.2.3/107 Distance from front face to basic diameter X Bar R 4.4.2.3/108 Depth of counterbore at rear X Bar R

Note 1: The contractor to provide a description of the process control procedures including the monitoring and charting of applicable parameters.

M28 FIN ASSEMBLY - Drawing # 9327831/9381586

4.4.2.4/105 Height of fin blade cant (blade 1) X Bar R 4.4.2.4/105 Height of fin blade cant (blade 2) X Bar R 4.4.2.4/105 Height of fin blade cant (blade 3) X Bar R 4.4.2.4/105 Height of fin blade cant (blade 4) X Bar R 4.4.2.4/105 Height of fin blade cant (blade 5) X Bar R 4.4.2.4/105 Height of fin blade cant (blade 6) X Bar R

*Revised 3/2014

File details come from the government source that posted it. Updated .