Attachment 5 - Inspection Checklist.xlsx
XLSX spreadsheet 15 KB Posted
- Attached to
- UNFIRED PRESSURE VESSEL INSPECTION SERVICE Federal contract opportunity
- Solicitation number
- W51AA1-24-Q-0035
- Issued by
- Department of the Army
About this file
This document contains an external inspection checklist for unfired pressure vessels and information on a related federal contract opportunity for inspection services. The inspection checklist outlines items to examine on pressure vessels such as external coverings, bolts, nuts, pressure gauges, relief valves, and welded joints. Inspectors are to check for issues like corrosion, defects, cracks, leakage, distortion, and proper operation. The federal contract opportunity is for unfired pressure vessel inspection services with the Department of the Army. It provides a solicitation number, describes a question and answer session to be held, and lists the call-in information.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Question and Answer 1 Pressure Vessels.docx | DOCX document | |
| Amendment 0001 - W51AA1-24-Q-0035.pdf | ||
| Attachment 2 QASP.pdf | ||
| Attachment 4 - Pricing Table.xlsx | XLSX spreadsheet | |
| Attachment 3 - Equipment List.xlsx | XLSX spreadsheet | |
| 24Q0035 SOLICITATION.pdf | ||
| Attachment 1 PWS.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Annual Inspection Checklist Unfired Pressure Vessel - External Inspection Checklist Vessel ID.:
| Inspection Item | Condition | |
| Yes | No |
Are external coverings such as insulation and corrosion resistant coatings in good condition?
Are bolts and nuts free of corrosion or defects?
Do pressure vessel mountings have adequate allowance for expansion and contraction?
Is vessel free of cuts or gouges?
Is vessel free of distortion?
Are welded joints and adjacent heat affected zones free of cracks or other defects?
Are accessible flange faces free of distortion?
Are vessel surfaces free of erosion or dents?
Is there any leakage of gas, vapor, or liquid?
Are vessel connections (Manholes, reinforcing plates, nozzles, or other connections) free of cracks, deformations, or other defects?
Are surfaces of shells and heads are free of cracks, blisters, bulges, and other evidence of deterioration? Same with skirt and the support attachment and knuckle regions of the heads?
Adequate number of threads are engaged on threaded connections?
All openings leading to any external fittings or controls are free from obstructions?
Any cracks at areas of high stress concentration?
IMPORTANT: The set pressure is not higher than the maximum allowable working pressure (MAWP) marked on the pressure retaining item?
Verify condition and proper operation and of all pressure gages.
Verify condition and proper operation of pressure relief valves
COMMENTS:
Inspector Signature: Inspection Date:
File details come from the government source that posted it. Updated .