W50S9H26QA039 - QUESTONS ANSWERS - 8.21.2026.pdf
PDF 123 KB Posted
- Solicitation number
- W50S9H26QA039
- Issued by
-
Department of the Army National Guard
About this file
This is a Questions and Answers document for federal contract solicitation W50S9H26QA039. The document clarifies requirements and evaluation criteria for lifting systems across three Contract Line Items (CLINs).
The solicitation requires a pneumatic lifting air bag station identified as part number 9314-010 with a 15-ton capacity rating. The Government will accept the original equipment manufacturer's current published technical specifications where they differ from figures in the requirements document. Brand-name restrictions apply only to CLINs 0001 and 0002; CLIN 0003 (fuselage lifting system) is unrestricted and permits equivalent systems meeting all stated requirements. The Government intends to make a single award for all required items but reserves the right to award all, some, or none in its best interest. Technical proposals will be evaluated on an acceptable/unacceptable basis, with price considered only after technical acceptability is determined. No Small Business Administration Nonmanufacturer Rule waiver has been issued for any item or CLIN. Government personnel and suitable equipment will be available at Building 908 to unload the crated lifting systems, eliminating contractor responsibility for unloading labor and equipment. The document is current as of August 21, 2026.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
W50S9H26QA039 – QUESTIONS AND ANSWERS
Q1. The solicitation and most of the requirements’ document identify the pneumatic lifting air bag station as P/N 9314-010, but Scope paragraph A also references P/N 9314-101. Please con�irm that P/N 9314-010 is the required part number.
Yes, it is the correct part number.
Q2. The speci�ications describe the system as 15-ton capacity but also state a rated capacity of 74,000 pounds. Please con�irm the required rated capacity.
15-ton capacity is required. Speci�ications document has been updated appropriately.
Q3. Please con�irm whether the Government will accept the OEM’s current published technical speci�ications for P/N 9314-010 where the OEM’s standard dimensions or capacity descriptions differ from �igures stated in the requirements document.
Yes
4. Does the brand-name restriction apply only to CLINs 0001 and 0002, or does it also apply to the CLIN 0003 fuselage lifting system? If CLIN 0003 is not brand-name restricted, may an equivalent system meeting every stated requirement be quoted?
Yes, just CLINs 0001 and 0002. CLIN 0003 is not brand-name restricted. Please refer to the brand name J&A attached with the solicitation.
5. Will the Government make one all-or-none award, or may it make separate awards by CLIN?
The Government intends to make one award for all required items. That said, the Government reserves the right to award all, some, or none in the best interest of the Government.
6. Under Section M, will technical proposals be evaluated on an acceptable/unacceptable basis followed by selection of the lowest-priced technically acceptable quotation, or will technical merit be comparatively evaluated against price?
Offers must be deemed technically acceptable for consideration of award. Price is an award factor after determination of acceptability.
7. Has SBA issued a Nonmanufacturer Rule waiver for any item or CLIN under this solicitation?
No, the non-manufactures rule has not been waived for this requirement.
8. Will Government personnel and suitable equipment be available to unload the crated lifting systems at Building 908, or must the contractor include unloading equipment and labor?
Yes
Current as of 8.21.2026
File details come from the government source that posted it. Updated .